699031
59
Verklein
Vergroot
Pagina terug
1/102
Pagina verder
SATEL INTEGRA Plus 57
Reporting delay option for the 4-8 and 64-79 zone types. Violation of the zone during the
entry delay countdown will trigger a warning alarm. The warning alarm does not cause any
loud alarm signal and is not reported. It can be signaled by the outputs of 9. DAY ALARM,
12. SILENT ALARM and 116. INTERNAL SIREN type. If the zone is not disarmed within 30
seconds, the entry delay has expired or another instant is violated, the burglary alarm will
be triggered.
Blocks verification option for 0-2, 85-86 and 94-95 zone types. If it is enabled, violation of
the zone will block verification of alarms in the partition. All alarms will be unverified until
the partition is armed again.
Check arm possibility option for the arming zones (80 and 82 zone types). The zone will
not arm, if a zone with enabled PRIORITY option is violated in the partition, or other
circumstance have occurred which prevent arming (depending on the selected options,
tamper, trouble, etc.).
Restore disarms option for the 89. FINISHING EXIT DELAY zone type. If it is enabled, the
zone restore will disarm the partition. This option overrides the option RESTORE DISABLES
VERIF
.
Restore disables verif. option for the 89. FINISHING EXIT DELAY zone type. If it is enabled,
the zone restore will disable verification of alarms in the partition. All alarms will be
unverified until the partition is armed again.
Disabled in arm state option for the 91. DETECTOR MASK zone type. If the option is enabled
and the zone is violated when armed, the information on detector trouble (masking) will not
be stored into the event log (the event code will not be sent to the monitoring station).
4.3.7 Counters
The control panel makes it possible to program 16 different counters which determine the
operating mode of the counter zones (zone types 16-31). The counter parameters can be
programmed:
using the keypad, in the service mode, by means of the COUNTERS function (ZONES
COUNTERS).
using the DLOADX program, in theZoneswindow, Counters tab.
The following should be programmed for each counter:
Max. value number of violations which, if exceeded, will trigger an alarm.
Counting time the time in which violations are counted.
Counter type:
normalall violations of counter group zones are counted,
omit recurs skips violations of the same zone (the alarm will be triggered, if the number
of violations of different zones exceeds the maximum value).
If the counter skips repeats, the programmed MAXIMUM COUNTER VALUE must be lower
than the number of zones in counter group.
4.3.8 Bypasses
You can define a group of zones for each of the zone types from 64 to 79:
using the keypad, in the service mode, by means of the BYPASSES function (ZONES
BYPASSES).
using the DLOADX program, in theZoneswindow, Bypassestab.
Having assigned the zones to a group, define what reaction should be to violation of the
bypassing zone:
Bypass only the zones belonging to the group will be bypassed for BYPASS TIME (see:
p. 50).
59

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel Integra 256 Plus bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel Integra 256 Plus in de taal/talen: Engels als bijlage per email.

De handleiding is 1,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Satel Integra 256 Plus

Satel Integra 256 Plus Snelstart handleiding - Nederlands - 2 pagina's

Satel Integra 256 Plus Aanvulling / aanpassing - Nederlands - 108 pagina's

Satel Integra 256 Plus Gebruiksaanwijzing - Nederlands - 53 pagina's

Satel Integra 256 Plus Installatiehandleiding - Nederlands - 35 pagina's

Satel Integra 256 Plus Gebruiksaanwijzing - Deutsch - 55 pagina's

Satel Integra 256 Plus Aanvulling / aanpassing - Deutsch - 108 pagina's

Satel Integra 256 Plus Installatiehandleiding - Deutsch - 36 pagina's

Satel Integra 256 Plus Gebruiksaanwijzing - English - 51 pagina's

Satel Integra 256 Plus Installatiehandleiding - English - 35 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info