699079
6
Verklein
Vergroot
Pagina terug
1/51
Pagina verder
4 User Manual SATEL
4. Authorization of users
Operation of the alarm system is possible after the user authorization, which allows the
control panel to verify that the user is authorized to perform the given operation. The
authorization can be done on the basis of:
code,
proximity card (125 kHz passive transponder, which can be in the form of card, tag, etc.),
DALLAS iButton (chip),
keyfob.
You can not assign the same identifier (code, proximity card, DALLAS iButton or
keyfob) to two users.
For safety reasons, different people should not use the same identifier.
The installer can configure the panel so that it will not accept codes that contain less
than three digits (e.g. 1111 or 1212) or consist of consecutive digits (3456).
The installer may permit the use of certain functions without the need for user
authorization.
Using an invalid code, proximity card or DALLAS iButton three times may:
trigger an alarm,
block the keypad / reader for 90 seconds.
4.1 Authorization with two identifiers
The INT-KLCDR, INT-KLFR, INT-KWRL and INT-KWRL2 keypads and the INT-SCR
multifunction keypads have a built-in proximity card reader. The installer can configure these
devices so that the user has to use two identifiers for authorization: the code and the card.
The function to be executed after the authorization depends on the second identifier:
code whether it will be confirmed by using the
key or the
key
,
card whether it will be presented only or held.
4.2 Factory default codes
By default, the following codes are preprogrammed in the control panel:
service code: 12345
object 1 master user (administrator) code: 1111
The factory default codes make it possible to assign individual codes to consecutive persons
who are to use the alarm system (see: Users p. 26).
The factory default codes should be changed before you start using your alarm system
(CHANGE OWN CODE function available in the user menu).
The control panel can inform the user that the code change is necessary, if the code is
known to other users.
The master code should not be used on a daily basis because of the risk of its being
captured. It is recommended that the administrator enter for himself an ordinary user's
code.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel Integra 24 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel Integra 24 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Satel Integra 24

Satel Integra 24 Snelstart handleiding - Nederlands - 24 pagina's

Satel Integra 24 Gebruiksaanwijzing - Nederlands - 52 pagina's

Satel Integra 24 Aanvulling / aanpassing - Nederlands - 121 pagina's

Satel Integra 24 Installatiehandleiding - Nederlands - 35 pagina's

Satel Integra 24 Snelstart handleiding - Deutsch - 2 pagina's

Satel Integra 24 Gebruiksaanwijzing - Deutsch - 54 pagina's

Satel Integra 24 Aanvulling / aanpassing - Deutsch - 121 pagina's

Satel Integra 24 Installatiehandleiding - Deutsch - 38 pagina's

Satel Integra 24 Aanvulling / aanpassing - English - 114 pagina's

Satel Integra 24 Installatiehandleiding - English - 36 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info