699079
43
Verklein
Vergroot
Pagina terug
1/114
Pagina verder
SATEL INTEGRA 41
Required settings of the DLOADX program for direct communication with the module:
programmed: number of TCP port used for communication and data encryption key
(DLOADX KEY).
1. Click on the button in the DLOADX program.
2. A drop-down menu will be displayed. Select “TCP/IP: DLOADX <- ETHM/INT-GSM” in it.
3. Send to the INT-GSM module the following SMS message:
xxxx= (“xxxx” the control command to initiate establishment of communication with
DLOADX program) – the module is to connect to the computer address programmed in
the module,
xxxx=aaaa:p= (“xxxx” the control command to initiate establishment of communication
with DLOADX program; “aaaa” address of the computer with DLOADX program (IP
address or domain name); “p” TCP port) the module is to connect to the computer
whose address has been given in the SMS message and use for communication the
TCP port given in the SMS message.
4. The DLOADX program will inform you about establishing connection by means of
a suitable message.
Establishing connection via the SATEL server
For communication via the SATEL server, the ports of 1024-65535 range are used as
outgoing ports. These ports must not be blocked.
If the INT-GSM module is connected to the ETHM-1 Plus module and connection over
Ethernet cannot be established, an attempt will be made to establish connection via
GPRS.
Required settings of the ETHM-1 Plus module:
CONNECTION VIA SATEL SERVER option enabled.
Required settings of the DLOAX program for communication via the SATEL server:
programmed: identification number assigned to the ETHM-1 Plus module by the SATEL
server (ETHM-1 ID), MAC address of the ETHM-1 Plus module (ETHM-1 MAC) and data
encryption key (DLOADX KEY) or selected set of parameters “Module: ETHM-1, Address n”
(settings of the ETHM-1 Plus module with address “n” will be used).
1. Click on the button in the DLOADX program.
2. A drop-down menu will be displayed. Select “TCP/IP: Satel server”.
3. A window will open. Click on the “Connection” button in the window.
4. The DLOADX program will inform you about establishing connection by means of
a suitable message.
3.4.3 Starting remote GPRS programming
The GPRS programming is possible in the case of INTEGRA 128-WRL or any other control
panel, if the INT-GSM module is installed in the alarm system or the SATEL GSM module is
connected to the control panel.
Programming the INTEGRA 128-WRL control panel
GPRS connection to the INTEGRA 128-WRL control panel can be established in one of the
following methods:
1. Initiating connection from the keypad (by the control panel). The control panel can be
programmed only from specified location. This method is recommended when the alarm
43

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel Integra 24 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel Integra 24 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,32 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Satel Integra 24

Satel Integra 24 Snelstart handleiding - Nederlands - 24 pagina's

Satel Integra 24 Gebruiksaanwijzing - Nederlands - 52 pagina's

Satel Integra 24 Aanvulling / aanpassing - Nederlands - 121 pagina's

Satel Integra 24 Installatiehandleiding - Nederlands - 35 pagina's

Satel Integra 24 Snelstart handleiding - Deutsch - 2 pagina's

Satel Integra 24 Gebruiksaanwijzing - Deutsch - 54 pagina's

Satel Integra 24 Aanvulling / aanpassing - Deutsch - 121 pagina's

Satel Integra 24 Installatiehandleiding - Deutsch - 38 pagina's

Satel Integra 24 Gebruiksaanwijzing - English - 51 pagina's

Satel Integra 24 Installatiehandleiding - English - 36 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info