699072
86
Verklein
Vergroot
Pagina terug
1/102
Pagina verder
84 Programming SATEL
identifiers assigned to the alarm system,
list of event codes (not applicable to Contact ID and SIA formats).
10.1 Reporting parameters and options
See also section “Telephone options” p. 68.
Shown in square brackets are the names used in keypads.
10.1.1 Options
Station 1 or Station 2 the control panel will make an attempt to send the event code to
station 1 and, if unsuccessful, to station 2.
Station 1 onlythe event codes are only sent to station 1.
Station 2 only the event codes are only sent to station 2.
Station 1 and 2 the event codes are sent to both stations. For most formats, it is possible
then to define which events will be sent to the given station (see: EVENTS ASSIGNMENT).
Dual path reporting the option is available when the ETHM-1 Plus module with the
INT-GSM module attached to it is connected to the control panel. The control panel will
make an attempt to send the event code to station 1 and, if unsuccessful, to station 2.
The dual path reporting requires that the following settings be additionally
programmed:
just one transmission path for Station 1: ETHM (Ethernet) [settings of the ETHM-1
Plus module with the INT-GSM module connected to it],
priority transmission path for Station 2: GPRS SIM1 or GPRS SIM 2 [settings of the
ETHM-1 Plus module with the INT-GSM module connected to it],
IP format for both stations: SIA-IP,
supervision of the link between the control panel and the central station:
SUPERVISION INTERVAL parameter configured at least for the first monitoring station.
No module restart reports [No rest. mon.] when this option is enabled and the Contact ID
or SIA format is used for reporting, no event codes referring to module restarts will be sent
to the monitoring station.
Advanced
Long kiss-off signal with this option enabled, the control panel will accept a long kiss-off
(acknowledgment) signal for receiving events in case of Ademco Express and Contact ID
formats. Enable this option in the event of telephone reporting if the monitoring station
acknowledges receiving events in a non-standard way (the kiss-off signal is longer than
800 ms).
Longer waiting for initial handshake with this option enabled, the control panel will wait
longer for handshake from the monitoring station in case of sending events in the Ademco
Express, Contact ID or SIA format. Enable this option in the event of telephone reporting, if
the monitoring station sends a non-standard initial handshake.
Identifier confirmation required the option refers to the SIA format. If it is enabled, the
control panel waits for acknowledgement by the monitoring station of receiving the
identifier with which the data were sent. The option refers to the telephone reporting.
6-character identifier the option refers to the SIA format. If it is enabled, events will be
sent with a 6-character identifier. It consists of 2 parts: 2-character prefix and 4-character
identifier.
Send event source name the option refers to the SIA format. If it is enabled, the name of
event source (zone, user, etc.) will also be sent along with the event code.
86

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel Integra 128 Plus bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel Integra 128 Plus in de taal/talen: Engels als bijlage per email.

De handleiding is 1,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Satel Integra 128 Plus

Satel Integra 128 Plus Gebruiksaanwijzing - Nederlands - 53 pagina's

Satel Integra 128 Plus Aanvulling / aanpassing - Nederlands - 108 pagina's

Satel Integra 128 Plus Installatiehandleiding - Nederlands - 35 pagina's

Satel Integra 128 Plus Gebruiksaanwijzing - Deutsch - 55 pagina's

Satel Integra 128 Plus Aanvulling / aanpassing - Deutsch - 108 pagina's

Satel Integra 128 Plus Installatiehandleiding - Deutsch - 36 pagina's

Satel Integra 128 Plus Gebruiksaanwijzing - English - 51 pagina's

Satel Integra 128 Plus Installatiehandleiding - English - 35 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info