699390
9
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
SATEL INT-TSI 7
Static IP – if this option is enabled, you must program the keypad network settings (tap one
of the parameters below and, using the onscreen keyboard that will be displayed, enter the
data).
IP address – keypad IP address.
Mask – mask of the subnetwork in which the keypad is working.
Gateway – IP address of the network device through which the other devices in the
local network can communicate with devices in other networks.
DNS – IP address of the DNS server which is to be used by the keypad.
DHCP – if you enable this option, the keypad will automatically download the IP address,
subnet mask, gateway and DNS data from the DHCP server.
MAC – the unique hardware address of the keypad.
Details – this button is available if the “DHCP” option is enabled. Tap the button if you want
to check the keypad network settings.
Master – when this option is enabled, the keypad is working in the MASTER mode (it
communicates with the control panel directly through the keypad bus). The option is
enabled by default.
Enable – the button is available, if the “Master” option is enabled. Press to make
detection of the keypad possible by the keypad working in SLAVE mode. A window
will be displayed, showing the countdown of time remaining for detection of the
keypad. After the window is closed, detection of the keypad will be impossible again.
Slave – if this option is enabled, the keypad is working in SLAVE mode (it communicates with
the control panel via another keypad, which is working in the MASTER mode).
IP address of the master keypad – IP address of the keypad working in MASTER
mode by means of which communication with the control panel takes place. Tapping
a parameter will display a keyboard which can be used to edit the address.
Find – the button available when the “Slave” option is enabled. Press to find the keypad
working in MASTER mode by means of which communication with the control panel
is to take place (before that, press “Enable” on the keypad working in MASTER
mode).
The network settings may only be edited by the installer and administrators.
Only one keypad working in SLAVE mode can communicate with the control panel by
means of the keypad working in MASTER mode.
Information about keypad
The window displays the keypad name, its address in the alarm system, etc. In addition,
there is a function available that makes it possible to check if the keypad power supply is
appropriate.
Firmware
The window displays information on the keypad firmware.
Screen cleaning
The touch screen can be locked for 30 seconds so as to allow cleaning of the keypad. When
a dialog box appears, asking if you want to lock the screen, tap .
Remote access
The window shows the status of remote access function. Touch the keypad screen to enable
/ disable the function. When the function is enabled, you can save the configuration from the
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel INT-TSI-SSW bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel INT-TSI-SSW in de taal/talen: Engels als bijlage per email.

De handleiding is 1,29 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Satel INT-TSI-SSW

Satel INT-TSI-SSW Gebruiksaanwijzing - Nederlands - 20 pagina's

Satel INT-TSI-SSW Installatiehandleiding - Nederlands - 33 pagina's

Satel INT-TSI-SSW Installatiehandleiding - Deutsch - 34 pagina's

Satel INT-TSI-SSW Gebruiksaanwijzing - English - 20 pagina's

Satel INT-TSI-SSW Installatiehandleiding - English - 40 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info