699607
10
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
U
SER
M
ANUAL
CA-5
8
the panel is not ready to arm the system – which is signaled by the panel with three long
beeps (see description in the previous paragraph of this manual);
the function is disabled by the installer – this situation will be signaled with two long beeps.
4.9 D
ISARMING AND ALARM CLEARING
[CODE][#]
If the panel is armed (the [ARMED] LED is on or blinking) and/or it signals an alarm (the
[ALARM] LED is on or blinking), entering the user access code and confirming it with the
[#] or [
*
] key will disarm the system and clear the alarm. If, while entering the access code,
you make a mistake, press the [
*
] key and re-enter the code. The control panel will confirm
acceptance of the command by four short beeps and a long one, and by extinguishing the
[ARMED] LED and/or [ALARM] LED (if it was on).
The service code can only clear the tamper alarm or the keyboard alarm when the
[ARMED] LED is off (the control panel is disarmed).
The panel will not disarm the system or clear the alarm when the access code is wrong.
The user access code No. 5 will not clear the alarm in the armed mode if a special operating
mode has been selected for it by the installer, and the system was armed by another user.
Refusal to clear the alarm is signaled with three long beeps.
4.10 R
EMOTE ARMING
/
DISARMING AND CLEARING ALARM
The installer may install in the security system a radio controller to make remote control
possible, or a special button, designed for quick arming/disarming of the system or clearing of
alarm. For this purpose, one of the control panel programmable zones is used. The system
will be always armed in this mode (by violation of the zone), irrespective of the status
(violation) of the other zones of the control panel.
Arming/disarming is signaled in the keypad by 4 short beeps and 1 long beep.
The installer may restrict the zone operation to arming only, while disarming and alarm
clearing will require the user access code.
To facilitate remote control of the panel, the installer may activate the signaling of
arming/disarming on the OUT1 alarm output (see: Events Signaled on the OUT1 Output).
5. „HOLD
DOWN”
USER FUNCTIONS
The functions are available to every user of the protected site (without using the access
code). They are activated by holding down the function key until audible signal sounds in
the keypad. The first three functions refer to viewing the alarms and troubles. Depending on
the keypad type the viewing is done in different ways.
LCD keypad
To start the viewing, call the function and press any of the arrow keys - information on
the most recent alarm condition, referring to selected function, will be displayed. The
([
S
], [
T
]) arrow keys on the right side of the keypad allow the user to scroll through the
list of events provided by the alarm control panel. The events are displayed
chronologically ([
S
] – earlier ones, [
T
] – later ones).
The ([
W
], [
X
]) arrow keys on the left side of the keypad make it possible to display the
user or zone name (default one or entered into the control panel memory by the installer
using the DLOAD10 computer program). Pressing the same key again will restore the
previous mode of event information display.
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel CA-5 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel CA-5 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,29 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Satel CA-5

Satel CA-5 Aanvulling / aanpassing - Deutsch - 20 pagina's

Satel CA-5 Gebruiksaanwijzing - Deutsch - 24 pagina's

Satel CA-5 Installatiehandleiding - Deutsch - 28 pagina's

Satel CA-5 Aanvulling / aanpassing - English - 20 pagina's

Satel CA-5 Snelstart handleiding - English - 12 pagina's

Satel CA-5 Installatiehandleiding - English - 27 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info