699583
9
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
CA-5 SATEL 7
5. enter the code [1][2][3][4][5] from the keypad (the code is to be entered within 15
seconds of removing the jumper) and terminated by pressing the key [#] or [
*
].
After completion of the a.m. operations, the control panel should return to its default
settings and stay in the service mode.
With the option 2 selected, violation of the 24H
TAMPER
zone type NO, NC, EOL, or
violation of this zone tamper circuit in the 2EOL configuration, when the control panel is
disarmed, will be alarm signaled in the keypad only. On the other hand, normal violation
of the 2EOL 24H
TAMPER
zone (activating the detector) will set off audible alarm,
irrespective of this option setting.
This option does not refer to keypad tampering. If the keypad is cut off when the control
panel is disarmed, the alarm will be signaled on the alarm outputs (audible alarm).
The option 3 – 3 minutes after the system has been armed, the keypad stops indicating
the armed mode status.(
[
ARMED
] LED is off) The indicator lights up again when one of
the zones is violated, or when tamper alarm is triggered.
The option 4 should be enabled if test transmissions are conducted frequently. Only 3
successive events of the test transmission are then saved in memory. Next transmissions
will not be saved, thus preventing the events memory of the control panel from being
quickly filled up. Occurrence of any event other than test transmission will reset the
blocking and activate event saving, which means that next three test transmissions can be
written to the memory.
The option 5 limits the number of saved alarms triggered by one zone down to 3 in time
intervals shorter than 1 minute. The option 5 limits the number of events generated in the
system by reducing the number of alarms triggered by one zone down to 3 in time intervals
shorter than 1 minute. If the control panel, being in armed state, has received 3 violations
from a given zone within a shorter time than 1 minute, then every next violation will be
ignored unless 1 minute has passed since the previous violation.
FS 79 – SYSTEM OPTIONS part 2
LED
No.
Name of option
in LCD keypad
Set
option
Description of option
1 troubles memory x
trouble until the current troubles are reviewed (key 7)
2 alarms memory x
alarm in the zone until the alarm log is reviewed (key 5)
3 new trbl. sign. audible signaling of new trouble
4 OUT1 fr.zn.only.
OUT1 from zone only – blocking acknowledgement on
OUT1 of arming/disarming from the keypad.
5 not used
x
– default
Notes:
Selection of the option 1 results in signaling the trouble (blinking of the [
TROUBLE
] LED)
even after its cause has ceased to exist, until the current troubles have been reviewed
(press and hold down the key 7).
With the option 2 selected, clearing the alarm signal will not reset the alarm memory for
the particular zones which triggered the given alarm. The signaling will be cleared after
reviewing the alarm log (press and hold down the key 5) or after arming the system.
With the option 3 activated, occurrence of a trouble in the system is indicated in the
keypad by means of the [
TROUBLE
] LED, as well as audibly, until the trouble cause is
removed. Viewing the current trouble, unless the trouble cause has been cleared, will only
mute the signaling (the LED keeps on blinking until the trouble is cleared, or a new review
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel CA-5 Plus bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel CA-5 Plus in de taal/talen: Engels als bijlage per email.

De handleiding is 0,15 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Satel CA-5 Plus

Satel CA-5 Plus Gebruiksaanwijzing - Nederlands - 24 pagina's

Satel CA-5 Plus Gebruiksaanwijzing - Deutsch - 24 pagina's

Satel CA-5 Plus Aanvulling / aanpassing - Deutsch - 20 pagina's

Satel CA-5 Plus Gebruiksaanwijzing - Deutsch - 24 pagina's

Satel CA-5 Plus Installatiehandleiding - Deutsch - 28 pagina's

Satel CA-5 Plus Gebruiksaanwijzing - English - 24 pagina's

Satel CA-5 Plus Installatiehandleiding - English - 27 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info