CATV FRANCHISE NOTE: Cable companies,
like public utilities, are franchised by local gov-
ernment authorities. To receive cable
programs, even with equipment which is
capable of receiving cable channels, the con-
sumer must subscribe to the cable company’s
service.
CONNECTING CABLE SERVICE, RF ANTENNA, OR SATELLITE RECEIVER TO
THE TV
Cable Service
OR
RF Antenna
OR
Satellite Receiver
TV Back
VCR Back
GETTING STARTED
Operational Tip for Monitor Use:
If the TV is used as a monitor only,
with a DVD player or some other type
of external equipment, and no cable or
antenna signal is available, the follow-
ing setup is necessary:
Your TVis designed to automatically
search for available channels. There-
fore, the initial start up requires that
you press the MENU key, enabling the
TV to automatically go through the
channel search process before you can
operate the TV. After the initial channel
search is completed, you must press the
MENU key again to complete the
channel search process. This may take
several minutes.
After the channel search process is
complete (2 searches), you can press
the INPUT key on the remote control
to use the TVas a monitor.
■
TV will automatically select the correct Antenna mode for
the type of Analog RF signal connected.
Use “Antenna Selection” in the Setup menu to change the
Antenna Mode.
■
TV will switch off automatically after 15 minutes if there is
no signal reception (cable out or station not broadcasting).
Exception—When the Video mode is selected, the TV will
not automatically switch off when signal reception has
stopped for 15 minutes.
■
If you move the TV to a new location, press the RESET key
twice after connecting the signal and turning on the TV.
6
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
Notes:
– If you do not have a cable
box, connect cable directly
to TV 75 ohm jack or VCR.
– If you do not have a VCR,
connect signal directly to TV
75 ohm jack.
