626686
20
Verklein
Vergroot
Pagina terug
1/64
Pagina verder
20
Only weight measurement
Press the „[SET/ON]“ button on the display module. The entire display appears as a
self-test until “- - - -“ is displayed (Fig. 1).
Audibly, briefly and firmly tap the scale with your foot to activate the vibration
sensor. The LED first shows red and then switches to green after about 5 se-
conds.
If the control panel is receiving the signal from the scale it shows „0.0“ (Fig. 2).
Now the scale is ready to measure your weight. Now step onto the scale. Stand still
on the scale with your weight distributed evenly between both legs. The scale imme-
diately begins to measure your weight.
Weighing, carrying out diagnostics
• Press the „[SET/ON]“ button on the control panel. The complete LCD display ap-
pears, then “- - - -“ is displayed.
• Now press the button
.
• Select the memory space where your personal data are stored by repeatedly pres-
sing the
or keys and confirm with „[SET/ON]“. These data are then displayed
consecutively until “- - - -” appears (Fig. 1).
• Audibly, briefly and firmly tap the scale with your foot to activate the vibration sen-
sor. The LED first shows red and then switches to green after about 5 seconds.
If the control panel is receiving the signal from the scale it shows „0.0“ (Fig. 2).
• Step onto the scale barefoot and make sure that you are standing still with your
weight evenly distributed between both legs on the stainless steel electrodes.
Note: Your feet, legs, calves and thighs must not touch each other.
Otherwise the measurement cannot be performed correctly.The scale immediately begins to measure
your weight.
The scales begin weighing immediately. First, the weight is displayed. Whilst the further parameters are
being measured an „arrow on the left edge of the display“ appears (fig. 3).
Your measured weight is displayed shortly after this (Fig 4).
Measure weight, call up stored values, perform diagnosis
• Press the „[SET/ON]“ button on the control panel. The complete LCD display appears, then “- - - -“ is
displayed.
• Now press the button.
.
• Select the memory space where your personal data are stored by repeatedly pressing the
or keys
and confirm with „[SET/ON]“.
• Firstly your stored data are displayed consecutively, followed by the last measured values.
Firstly the following display appears.
1. Weight in kg
2. Body fat in % with interpretation of BF
3. Body water in %
4. Muscle percentage in %
5. Bone mass in kg
6. Active metabolic rate in kcal
Switching off the scale
The scale and the control panel switch off automatically after 10 minutes. While you adjust the settings it
takes 90 seconds before the control panel automatically switches off.
Hold the „[SET/ON]“ button depressed for 3 seconds to switch off the display module manually.
Make sure that you always switch on the scale first and wait for the display to show „0.0“ (Fig. 2) before
stepping on it.
Fig. 3
Fig. 4
0.0
kg
Fig. 2
----
Fig. 1
20

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sanitas SBG 43 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sanitas SBG 43 in de taal/talen: Duits, Engels, Frans, Spaans als bijlage per email.

De handleiding is 2,59 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info