797367
5
Verklein
Vergroot
Pagina terug
1/15
Pagina verder
04
GB
E
Auto clock set mode
1. Press the Power button to switch on your radio.
2. Press the Band button to select FM radio mode.
3. Press and hold the Menu button to enter the menu setting and then rotate the Tuning control knob until “RBDS
Auto CT” is shown on the display. Press the Tuning control knob to enter the setting.
4. Rotate the Tuning control knob to select “Auto” and press the Tuning control knob to conrm the setting. Your
radio will synchronize its clock time whenever it tunes to a radio station using RDS / RBDS with CT signals. The
symbol “CT” will appear on the display indicating the radio time is RDS / RBDS clock time.
5. If you wish to cancel the “RBDS Auto CT” function, press and hold the Menu button and then rotate the Tuning
control knob until “RBDS Auto CT” is shown on the display. Press the Tuning control knob and rotate the Tuning
control knob to select “Manual”. Press the Tuning control knob to conrm the setting. Please refer to the later
section “Setting the clock manually” to set the clock time and date.
1. If the clock time was not auto adjusted within 24 hours, the symbol “CT” will disappear on the display.
2. If clock time from local RDS / RBDS station is not correct, you should consider disabling the “RBDS Auto CT”
function.
3. Please note that at times the RDS / RBDS signal may broadcast the wrong time, this is the fault of the radio
station and not your radio.
NOTE
Setting the clock manually
When choosing manual setting as the clock time setting of your radio, the “RBDS Auto CT” function will be disabled.
1. Press and hold the Menu button to enter the menu setting and then rotate the Tuning control knob until “Clock” is
shown on the display.
2. Press the Tuning control knob to enter the time setting. The hour digit will ash on the display.
3. Rotate the Tuning control knob to set the desired hour. Then press the Tuning control knob to conrm the setting.
The minute digit will ash on the display.
4. Rotate the Tuning control knob to set the desired minute and press the Tuning control knob to conrm the setting.
Now the month digit will ash on the display.
5. Follow the steps above to set the month / day / year. When the time and date setting is completed, the display will
show “Clock Saved”.
Setting the time format
1. Press and hold the Menu button to enter the menu setting and then rotate the Tuning control knob until “12 / 24
hour” is shown on the display.
2. Press the Tuning control knob and rotate the Tuning control knob to select 12 or 24 hour format. Press the Tuning
control knob to conrm the setting. The selected format is used in standby mode, in playing mode and when
setting the alarms.
Operating the radio
This radio is equipped with three tuning methods – Scan tuning, Manual tuning, Memory presets recall.
Scan tuning FM / AM
1. Make sure the telescopic antenna is set up in advance.
2. Press the Power button to switch on your radio.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sangean HDR-16 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sangean HDR-16 in de taal/talen: Engels als bijlage per email.

De handleiding is 1.85 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info