797034
9
Verklein
Vergroot
Pagina terug
1/19
Pagina verder
08
GB
F
E
NL
D
3. Use the Rotary Tuning knob (16) or the numeric
buttons (19) to change the character and input your
desired character.
4. Press the Tuning Up / Down buttons (18) to go to the
next / previous character and repeat the instructions in
step 3 to edit the selected character.
5. If the name you want to enter is shorter than the
original name, use the Tuning Up / Down buttons
(18) and Cancel button (31) to select and erase any
unwanted characters.
6. Press the Enter button (30) to confirm the city name.
4. LISTENING TO THE RADIO
TUNING TO RADIO STATIONS
The ATS-909X2 is capable of tuning to radio stations on
the SW, MW, LW, FM and AIR bands. The radio features
an Automatic Tuning System (ATS) that can be used to
automatically store preset stations when the SW, MW, LW
or FM band is selected. When the AIR band is selected,
only manual tuning and scan tuning can be used to search
for stations and preset stations must be stored manually.
NOTE
Listening to airband frequencies (118-137 MHz) without
a license is prohibited in some countries. Only use this
device to listen to airband frequencies when this is
allowed under local laws and regulations.
NOTE
For the best reception, please make sure the telescopic
antenna on the back of the radio (33) is fully extended
when listening to the FM, SW or AIR band. When
listening to the SW, MW or LW band, make sure the
included external AM antenna is connected to the AM
EXT. ANT jack (36) and that the antenna is placed as
high as possible and is not being obstructed.
USING THE AUTOMATIC TUNING SYSTEM
(ATS) – MW / LW / FM
The Automatic Tuning System can be used to
automatically scan for radio stations with a strong signal
on the MW, LW or FM band and store these stations as
preset stations. Since the MW and LW share the same
button, simply press this button (21) twice to switch
between the medium wave and the long wave.
Follow these steps to use the Automatic Tuning System
on the MW / LW / FM band:
1. Turn on the radio using the Power button (10).
2. Press and hold either the ATS / MW / LW (21) or ATS /
FM (22) button to activate the Automatic Tuning System
for the corresponding band.
3. The radio will now search for all strong signals on the
selected waveband and store the stations it finds as
preset stations.
4. When the scan is completed, the radio will play the first
preset on the first page (which is the station with the
best reception).
NOTE
When using the ATS feature on the MW / LW / FM band,
all existing presets that have not been locked on that
waveband will be cleared.
NOTE
When using the ATS feature on the MW / LW / FM band,
the radio will store preset stations based on signal
strength. If more stations are found than there are
presets available, the stations with the weakest signals
will not be stored.
USING THE AUTOMATIC TUNING SYSTEM
(ATS) – SW ONLY
The Automatic Tuning System can also be used on the
SW band. The process for using it is slightly different from
the process on the other bands.
Follow these steps to use the Automatic Tuning System
on the SW band:
1. Turn on the radio using the Power button (10).
2. Press and hold the ATS / METER / SW button (20).
The message "ATS START- " will be shown in the Text
display (U).
3. Use the Rotary Tuning knob (16) to select the start
frequency from 1.7MHz to 29.9MHz.
4. Press the Step button (17) or Enter button (30) to
confirm the start frequency.
The message "ATS END- " will be shown in the Text
display (U).
5. Rotate the Rotary Tuning knob (16) to select the end
frequency from 2.7MHz to 29.9MHz. The end frequency
is always at least 1MHz higher than the selected start
frequency, as the selected ATS frequency range must
be larger than 1MHz.
6. Press the Step button (17) or Enter button (30) to
confirm the end frequency.
7. Rotate the Rotary Tuning knob (16) to select the
desired ATS preset page number.
By default, page 30 will be selected.
8. Press the Step button (17) or Enter button (30) to
confirm the page number.
9. When the scan is completed, the Text display (U) will
show the message "FINISHED", the selected preset
page will be renamed to "ATS-PRESET" and the first
preset on the selected page will automatically be
played.
NOTE
When using the ATS feature on the SW band, all existing
presets that have not been locked on the selected page
number will be cleared.
NOTE
When using the ATS feature on the SW band, the radio
will store preset stations based on signal strength. If
more stations are found than there are presets available
on a preset page, the stations with the weakest signal
will not be stored. If no stations are found during the
scan, the radio will tune to the start frequency of the set
ATS scan range.
NOTE
It is recommended to use a frequency range of
approximately 5MHz for ATS scans and repeat scanning
this range on different pages until no new presets are
found. This way, several preset pages can be populated
with presets and the entire SW band can be covered in
a quick manner.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sangean ATS-909X2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sangean ATS-909X2 in de taal/talen: Engels als bijlage per email.

De handleiding is 2.39 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Sangean ATS-909X2

Sangean ATS-909X2 Gebruiksaanwijzing - Nederlands - 21 pagina's

Sangean ATS-909X2 Gebruiksaanwijzing - Deutsch - 20 pagina's

Sangean ATS-909X2 Gebruiksaanwijzing - Français - 21 pagina's

Sangean ATS-909X2 Gebruiksaanwijzing - Espanõl - 21 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info