87
SSeettttiinnggss
86
SSeettttiinnggss
Network Selection
The Network Selection feature enables you to:
• Indicate whether the network used when roaming
(outside your home area) is selected automatically
or manually
• Set up a preferred list to be used when selecting
a network automatically
Note: You can select a network other than your
home network if it has a valid roaming
agreement with your home network.
To indicate whether the network is to be selected
automatically or manually when roaming, proceed as
follows.
1. When Network Select is displayed, press the
Select soft key.
2. Press or until the appropriate option
is highlighted and press the OK soft key.
If you select Automatic, you are connected to the
first available network in the preferred list when
roaming.
If you select Manual, the phone scans for the
available networks. Go to Step 3.
3. Press or until the preferred network
is highlighted and press the OK soft key.
You are connected to that network when roaming.
Change Barring Password: you can set and change
the call barring password obtained from your service
provider using this option. You must enter the current
password before you can specify a new one.
Once you have entered a new password, you are asked
to confirm it by entering it again.
Call Waiting
This network service enables you to be informed when
someone is trying to reach you during another call.
To set your call waiting options, proceed as follows.
1. Select the type of calls to which the call waiting
option is to be applied by pressing or
until the appropriate option is highlighted and then
press the Select soft key.
2. Press the Activate soft key to confirm your settings.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
To deactivate specific call waiting settings, proceed as
follows.
1. Select the type of call to which the option applies.
2. Press the Deactivate soft key.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
You can also deactivate all
call waiting settings by
selecting the Cancel All option.
