You can store the numbers that you dial most
frequently in memory, so that you do not have to
enter them each time.
According to your SIM card, 1 to 120 phone numbers
can be stored, each phone number can be up to
20 digits.
If the message Phonebook Fullappears, you can
overwrite a number that is no longer required.
To enter letters on the keypad, press the corresponding button as
many times as required in quick succession. Then, the phone auto-
matically moves on to the next position. Refer to the table below.
Button Characters
1. In Standby mode, press to enter
the phone book menu.
Result:
The Sub-menu of the phone
book appears.
4. (cont.)
Example:
To enter the capital letter S,
press numeric button 7 four
times in quick succession.
You can correct a letter entered
by pressing C the required
number of times.
5. Press .
Result:
Location:is displayed.
6. Indicate the location (1 to 120 accor-
ding to your SIM card) that you wish
to assign to the telephone number to
be stored, then press .
Result:
Storedis displayed,
followed by Repeat?.
7. If the Overwrite? indication is
displayed, a number has already been
stored in the memory register
selected.
To... Press...
Replace it with .
a new one
Cancel the C
operation (Go back to
Step 6)
2. Press 1 to store number.
Result:
Enter Tel:is displayed.
4. Enter the name (up to 12 characters)
to be stored with the number.
You can skip over next step.
3. Enter the telephone number to be
stored in memory, then press .
You can enter up to 20 digits.
Result:
Enter Name:appears.
