18
REVERSING THE DOOR SWING
• Check that the power plug is correctly connected.
• Is the temperature control on the front panel correctly set?
• Does sun shine on the appliance or are there heat sources nearby?
• Is the back of the appliance too near to the wall?
The appliance is not operating at all or the temperature is too high
• Is the temperature control on the front panel set to the coldest temperature?
• Is the surrounding temperature too low?
• Did you put the hot food in the refrigerator?
The food in the refrigerator is frozen
• Check that the appliance is installed on a stable, level floor.
• Is the back of the appliance too near to the wall?
• Have any foreign objects fallen behind or under the appliance?
• Is there noise coming from the compressor in the appliance?
• A ticking sound may be heard inside the appliance; this is normal. This sound occurs when the
various accessories contract or expand.
•
Heat-proof pipes are installed in the front corners of the appliance to prevent condensation from forming.
When the surrounding temperature rises, this may not always be effective. However, this is not abnormal.
• In very humid weather, condensation may form on the outer surface of the appliance when the
moisture in the air comes into contact with the cool surface of the appliance.
The front corners and sides of the appliance are warm and condensation starts to form
PROBLEMS AND SOLUTIONS
There are unusual noises
27. After switching the position of the CAP HOLE
HINGE LOW, reassemble the COVER LEG
FRONT with the door open.
28. Confirm the openalosing of the Fridge
and the Freezer Doors.
29.
Detach the CAP SCREW HANDLE
with flat screwdriver and disassemble
the HANDLE BAR with unscrewing.
‑
REVERSING THE HANDLE BAR
30.
Switch the position of the
CAP HOLE DOORs, pulling
out and pushing them in.
31. Reattach the HANDLE
BARS on the other side of
doors in reverse order.
