797648

Samsung WD80T4046 Handleiding

12
Verklein
Vergroot
Pagina terug
1/64
Pagina verder
Washing Machine
User manual
WD8*T4***** / WD7*T4*****
WD80T4046CW_04215V-00_EN.indd 1 2021/8/10 17:17:36
2 English
Contents
Contents
Safety information 4
What you need to know about the safety instructions 4
Important safety symbols 4
Important safety precautions 5
Critical installation warnings 8
Installation cautions 9
Critical usage warnings 10
Usage cautions 11
Critical cleaning warnings 14
Instructions about the WEEE 15
Ecodesign 15
Installation 16
What’s included 16
Installation requirements 18
Step-by-step installation 20
Before you start 30
Initial settings 30
Laundry guidelines 30
Detergent recommendation 33
Detergent drawer guidelines 34
Operations 37
Control panel 37
Simple steps to start 38
Drying Only 39
Cycle overview 40
Settings 44
WD80T4046CW_04215V-00_EN.indd 2 2021/8/10 17:17:37
English 3
Contents
Maintenance 45
Drum clean 45
Smart check 46
Emergency drain 47
Cleaning 48
Recovery from freezing 51
Care against an extended time of disuse 51
Troubleshooting 52
Checkpoints 52
Information codes 56
Specications 59
Fabric care chart 59
Protecting the environment 61
Spare parts guarantee 61
Specication sheet 61
Indicative information (According to EU 2019/2023) 63
WD80T4046CW_04215V-00_EN.indd 3 2021/8/10 17:17:37
4 English
Safety information
Safety information
Congratulations on your new Samsung washing machine. This manual contains important
information on the installation, use and care of your appliance. Please take some time to read
this manual to take full advantage of your washing machine’s many benets and features.
What you need to know about the safety instructions
Please read this manual thoroughly to ensure that you know how to safely and efciently
operate the extensive features and functions of your new appliance. Please store the manual
in a safe location close to the appliance for future reference. Use this appliance only for its
intended purpose as described in this instruction manual.
Warnings and Important Safety Instructions in this manual do not cover all possible
conditions and situations that may occur. It is your responsibility to use common sense,
caution and care when installing, maintaining and operating your washing machine.
Because the following operating instructions cover various models, the characteristics of your
washing machine may differ slightly from those described in this manual and not all warning
signs may be applicable. If you have any questions or concerns, contact your nearest service
centre or nd help and information online at www.samsung.com.
Important safety symbols
What the icons and signs in this user manual mean:
WARNING
Hazards or unsafe practices that may result in severe personal injury, death and/or property
damage.
CAUTION
Hazards or unsafe practices that may result in personal injury and/or property damage.
NOTE
Indicates that a risk of personal injury or material damage exists.
Read the instructions
These warning signs are here to prevent injury to yourself and others.
Please follow them explicitly.
After reading this manual, store it in a safe place for future reference.
Read all instructions before using the appliance.
As with any equipment that uses electricity and moving parts, potential hazards exist. To
safely operate this appliance, familiarize yourself with its operation and exercise care when
using it.
WD80T4046CW_04215V-00_EN.indd 4 2021/8/10 17:17:37
English 5
Safety information
Important safety precautions
WARNING
To reduce the risk of re, electric shock, or injury to persons
when using your appliance, follow basic precautions, including
the following:
1. This appliance is not to be used by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of
the appliance by a person responsible for their safety.
2. For use in Europe: This appliance can be used by children
aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and
understand the hazards involved. Children shall not play with
the appliance. Cleaning and user maintenance shall not be
made by children without supervision.
3. Children should be supervised to ensure that they do not play
with the appliance.
4. If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualied persons
in order to avoid a hazard.
5. The new hose-sets supplied with the appliance are to be used
and that old hose-sets should not be reused.
6. For appliances with ventilation openings in the base, that a
carpet must not obstruct the openings.
WD80T4046CW_04215V-00_EN.indd 5 2021/8/10 17:17:37
6 English
Safety information
Safety information
7. For use in Europe: Children of less than 3 years should be
kept away unless continuously supervised.
8. CAUTION: In order to avoid a hazard due to inadvertent
resetting of the thermal cut-out, this appliance must not be
supplied through an external switching device, such as a
timer, or connected to a circuit that is regularly switched on
and off by the utility.
9. The tumble dryer is not to be used if industrial chemicals have
been used for cleaning.
10. The lint trap has to be cleaned frequently, if applicable.
11. Lint must not to be allowed to accumulate around the tumble
dryer. (not applicable for appliances intended to be vented to
the exterior of the building)
12. Adequate ventilation has to be provided to avoid the back
ow of gases into the room from appliances burning other
fuels, including open res.
13. Do not dry unwashed items in the tumble dryer.
14. Items that have been soiled with substances such as cooking
oil, acetone, alcohol, petrol, kerosene, spot removers,
turpentine, waxes and wax removers should be washed in hot
water with an extra amount of detergent before being dried
in the tumble dryer.
15. Items such as foam rubber (latex foam), shower caps,
waterproof textiles, rubber backed articles and clothes or
pillows tted with foam rubber pads should not be dried in
the tumble dryer.
16. Fabric softeners, or similar products, should be used as
specied by the fabric softener instructions.
WD80T4046CW_04215V-00_EN.indd 6 2021/8/10 17:17:37
English 7
Safety information
17. The nal part of a tumble dryer cycle occurs without heat
(cool down cycle) to ensure that the items are left at a
temperature that ensures that the items will not be damaged.
18. Remove all objects from pockets such as lighters and matches.
19. WARNING: Never stop a tumble dryer before the end of the
drying cycle unless all items are quickly removed and spread
out so that the heat is dissipated.
20. Exhaust air must not be discharged into a ue which is used
for exhausting fumes from appliances burning gas or other
fuels.
21. The appliance must not be installed behind a lockable door,
a sliding door or a door with a hinge on the opposite side to
that of the tumble dryer, in such a way that a full opening of
the tumble dryer door is restricted.
22. WARNING: The appliance must not be supplied through an
external switching device, such as a timer, or connected to a
circuit that is regularly switched on and off by a utility.
23. This appliance is intended to be used in household only and it
is not intended to be used such as:
− staff kitchen areas in shops, ofces and other working
environments;
− farm houses;
− by clients in hotels, motels and other residential type
environments;
− bed and breakfast type environments;
− areas for communal use in blocks of ats or in launderettes.
WD80T4046CW_04215V-00_EN.indd 7 2021/8/10 17:17:38
8 English
Safety information
Safety information
Critical installation warnings
WARNING
The installation of this appliance must be performed by a qualied technician or service
company.
• Failure to do so may result in electric shock, re, an explosion, problems with the product,
or injury.
The appliance is heavy, therefore take care when lifting it.
Plug the power cord into an AC 220 - 240 V / 50 Hz wall socket or higher and use the socket
for this appliance only. Never use an extension cord.
• Sharing a wall socket with other appliances using a power strip or extending the power
cord may result in electric shock or re.
• Ensure that the power voltage, frequency, and current are the same as those of the
product specications. Failure to do so may result in electric shock or re. Plug the power
plug into the wall socket rmly.
Remove all foreign substances such as dust or water from the power plug terminals and
contact points using a dry cloth on a regular basis.
• Unplug the power plug and clean it with a dry cloth.
• Failure to do so may result in electric shock or re.
• Plug the power plug into the wall socket so that the cord is running towards the oor.
If you plug the power plug into the socket in the opposite direction, the electric wires
within the cable may be damaged and this may result in electric shock or re.
Keep all packaging materials out of the reach of children as these may be dangerous.
• If a child places a bag over its head, it may suffocate.
When the appliance, power plug or power cord is damaged, contact your nearest service
centre.
This appliance must be properly grounded.
Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.
• This may result in electric shock, re, an explosion, or problems with the product.
• Never plug the power cord into a socket that is not grounded correctly and make sure
that it is in accordance with local and national regulations.
Do not install this appliance near a heater or any inammable material.
Do not install this appliance in a humid, oily or dusty location, or in a location exposed to
direct sunlight or water (rain drops).
Do not install this appliance in a location exposed to low temperatures.
• Frost may cause the tubes to burst.
WD80T4046CW_04215V-00_EN.indd 8 2021/8/10 17:17:38
English 9
Safety information
Do not install this appliance in a location where gas may leak.
• This may result in electric shock or re.
Do not use an electric transformer.
• This may result in electric shock or re.
Do not use a damaged power plug, damaged power cord, or loose wall socket.
• This may result in electric shock or re.
Do not pull or excessively bend the power cord.
Do not twist or tie the power cord.
Do not hook the power cord over a metal object, place a heavy object on the power cord,
insert the power cord between objects, or push the power cord into the space behind the
appliance.
• This may result in electric shock or re.
Do not pull the power cord when unplugging the power plug.
• Unplug the power plug by holding the plug.
• Failure to do so may result in electric shock or re.
This appliance should be positioned so that the power plug, the water supply taps, and the
drain pipes are accessible.
Following the repair by a non-authorized service provider, self-repair or non-professional
repair of the product, Samsung is not liable for any damage to the product, any injury or
any other product safety issue caused by any attempt to repair the product which does
not carefully follow these repair and maintenance instructions. Any damage to the product
caused by an attempt to repair the product by any person other than a Samsung certie
service provider will not be covered by the warranty.
Installation cautions
CAUTION
This appliance should be positioned in such a way that the power plug is easily accessible.
• Failure to do so may result in electric shock or re due to electric leakage.
Install your appliance on a solid, level oor that can support its weight.
• Failure to do so may result in abnormal vibrations, movement, noise, or problems with
the product.
WD80T4046CW_04215V-00_EN.indd 9 2021/8/10 17:17:38
10 English
Safety information
Safety information
Critical usage warnings
WARNING
If the appliance is ooded, turn off the water & power supplies immediately and contact your
nearest service centre.
• Do not touch the power plug with wet hands.
• Failure to do so may result in electric shock.
If the appliance generates a strange noise, a burning smell, or smoke, unplug the power plug
immediately and contact your nearest service centre.
• Failure to do so may result in electric shock or re.
In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate immediately without
touching the power plug. Do not touch the appliance or power cord.
• Do not use a ventilating fan.
• A spark may result in an explosion or re.
Do not let children play in or on the washing machine. In addition, when disposing of the
appliance, remove the washing machine door lever.
• If trapped inside the product, children may suffocate to death.
Make sure to remove the packaging (sponge, styrofoam) attached to the bottom of the
washing machine before using it.
Do not wash items contaminated with gasoline, kerosene, benzene, paint thinner, alcohol or
other inammable or explosive substances.
• This may result in electric shock, re, or an explosion.
Do not open the washing machine door by force while it is operating (high-temperature
washing/drying/spinning).
• Water owing out of the washing machine may result in burns or cause the oor to be
slippery. This may result in injury.
• Opening the door by force may result in damage to the product or injury.
Do not insert your hand under the washing machine while an operation is in progress.
• This may result in injury.
Do not touch the power plug with wet hands.
• This may result in electric shock.
Do not turn the appliance off by unplugging the power plug while an operation is in progress.
• Plugging the power plug into the wall socket again may cause a spark and result in
electric shock or re.
Do not let children climb in or onto the appliance.
WD80T4046CW_04215V-00_EN.indd 10 2021/8/10 17:17:38
English 11
Safety information
• This may result in electric shock, burns or injury.
Do not insert your hand or a metal object under the washing machine while it is operating.
• This may result in injury.
Do not unplug the appliance by pulling the power cord. Always grip the plug rmly and pull
it straight out of the outlet.
• Damage to the power cord may cause a short-circuit, re and/or electric shock.
Do not attempt to repair, disassemble, or modify the appliance yourself.
• Do not use a fuse (such as copper, steel wire, etc.) other than a standard fuse.
• When the appliance needs to be repaired or reinstalled, contact your nearest service
centre.
• Failure to do so may result in electric shock, re, problems with the product, or injury.
If the water supply hose comes loose from the water tap and oods the appliance, unplug the
power plug.
• Failure to do so may result in electric shock or re.
Unplug the power plug when the appliance is not being used for long periods of time or
during a thunder or lightning storm.
• Failure to do so may result in electric shock or re.
If any foreign substance enters into the appliance, unplug the power plug and contact you
nearest Samsung Customer Service.
• This may result in electric shock or re.
Do not let children (or pets) play in or on your washing machine. The washing machine door
does not open easily from the inside and children may be seriously injured if trapped inside.
Usage cautions
CAUTION
When the washing machine is contaminated by a foreign substance such as detergent, dirt,
food waste, etc., unplug the power plug and clean the washing machine using a damp, soft
cloth.
• Failure to do so may result in discolouration, deformation, damage, or rust.
The front glass may be broken by a strong impact. Take care when using the washing
machine.
• If the glass is broken, it may result in injury.
After a water supply failure or when reconnecting the water supply hose, open the water tap
slowly.
WD80T4046CW_04215V-00_EN.indd 11 2021/8/10 17:17:38
12 English
Safety information
Safety information
Open the water tap slowly after a long period of non-use.
• The air pressure in the water supply hose or the water pipe may damage a product part
or result in a water leak.
If a draining error occurs during an operation, check if there is a draining problem.
• If the washing machine is used when it is ooded because of a draining problem, it may
result in electric shock or re.
Insert the laundry into the washing machine completely so that the laundry does not get
caught in the door.
• If laundry gets caught in the door, it may result in damage to the laundry or the washing
machine, or result in a water leak.
Turn the water supply off when the washing machine is not being used.
Ensure that the screws on the water supply hose connector are properly tightened.
• Failure to do so may result in property damage or injury.
Ensure that the rubber seal and front door glass are not contaminated by a foreign substance
(e.g. waste, thread, hair, etc.).
• If a foreign substance is caught in the door or the door is not completely closed, it may
cause a water leak.
Open the water tap and check if the water supply hose connector is rmly tightened and that
there is no water leak before using the product.
• If the screws on the water supply hose connector are loose, it may result in a water leak.
The product you have purchased is designed for domestic use only.
Using the product for business purposes qualies as a product misuse. In this case, the
product will not be covered by the standard warranty provided by Samsung and no
responsibility can be attributed to Samsung for malfunctions or damages resulting from such
misuse.
Do not stand on the appliance or place objects (such as laundry, lighted candles, lighted
cigarettes, dishes, chemicals, metal objects, etc.) on the appliance.
• This may result in electric shock, re, problems with the product, or injury.
Do not spray volatile material such as insecticide onto the surface of the appliance.
• As well as being harmful to humans, this may result in electric shock, re or problems
with the product.
Do not place objects that generate electromagnetic elds near the washing machine.
• This may result in injury due to a malfunction.
Water drained during a high-temperature wash or drying cycle is hot. Do not touch the water.
• This may result in burns or injury.
WD80T4046CW_04215V-00_EN.indd 12 2021/8/10 17:17:38
English 13
Safety information
Do not wash, spin, or dry water-proof seats, mats, or clothing (*) unless your appliance has a
special cycle for washing these items.
(*): Woollen bedding, rain covers, shing vests, ski pants, sleeping bags, diaper covers, sweat
suits, and bicycle, motor cycle and car covers, etc.
• Do not wash thick or hard mats even if the washing machine mark is on the care label.
This may result in injury or damage to the washing machine, walls, oor, or clothing due
to abnormal vibrations.
• Do not wash throw rugs or doormats with rubber backing. The rubber backing may come
off and stick to inside the drum, and this may result in malfunction such as a drainage
error.
Do not operate the washing machine when the detergent drawer is removed.
• This may result in electric shock or injury due to a water leak.
Do not touch the insides of the drum during or just after drying as it is hot.
• This may result in burns.
The door glass becomes hot during washing and drying. Therefore, do not touch the door
glass.
Also, do not allow children to play around the washing machine or touch the door glass.
• This may result in burns.
Do not insert your hand into the detergent drawer.
• This may result in injury as your hand may be caught by the detergent input device.
• The liquid detergent guide (applicable models only) is not used for powder detergent.
Remove the guide when using powder detergent.
Do not place any objects (such as shoes, food waste, animals) other than laundry into the
washing machine.
• This may result in damage to the washing machine, or injury and death in the case of
pets due to the abnormal vibrations.
Do not press the buttons using sharp objects such as pins, knifes, ngernails, etc.
• This may result in electric shock or injury.
Do not wash laundry contaminated by oils, creams or lotions usually found in skincare shops
or massage clinics.
• This may cause the rubber seal to become deformed and result in a water leak.
Do not leave metal objects such as safety pins, hair pins or bleach in the drum for long
periods of time.
• This may cause the drum to rust.
• If rust starts appearing on the surface of the drum, apply a (neutral) cleansing agent to
the surface and use a sponge to clean it. Never use a metal brush.
WD80T4046CW_04215V-00_EN.indd 13 2021/8/10 17:17:38
14 English
Safety information
Safety information
Do not use dry cleaning detergent directly and do not wash, rinse, or spin laundry
contaminated by dry cleaning detergent.
• This may result in spontaneous combustion or ignition due to the heat from the oxidation
of the oil.
Do not use water from water cooling/heating devices.
• This may result in problems with the washing machine.
Do not use natural hand-washing soap for the washing machine.
• If it hardens and accumulates inside the washing machine, it may result in problems with
the product, discolouration, rust, or bad odours.
Place socks and brassieres in a washing net and wash them with the other laundry.
Do not wash large laundry items such as bedding in the washing net.
• Failure to do so may result in injury due to abnormal vibrations.
Do not use hardened detergent.
• If it accumulates inside the washing machine, it may result in a water leak.
Make sure that the pockets of all the clothing items to be washed are empty.
• Hard, sharp objects such as coins, safety pins, nails, screws, or stones can cause extensive
damage to the appliance.
Do not wash clothing with large buckles, buttons or other heavy metal objects.
Sort the laundry by color on the basis of its colorfastness and select the recommended cycle,
water temperature and additional functions.
• This may result in discoloration or fabric damage.
Take care that children’s ngers are not caught in the door when you close it.
• Failure to do so may result in injury.
To prevent odours and mould, leave the door open after a wash cycle to allow the drum to
dry.
To prevent limescale build up, leave the detergent drawer open after a wash cycle and dry
inside it.
Critical cleaning warnings
WARNING
Do not clean the appliance by spraying water directly onto it.
Do not use the a strong acidic cleaning agent.
WD80T4046CW_04215V-00_EN.indd 14 2021/8/10 17:17:38
English 15
Safety information
Do not use benzene, thinner or alcohol to clean the appliance.
• This may result in discolouration, deformation, damage, electric shock or re.
Before cleaning or performing maintenance, unplug the appliance from the wall socket.
• Failure to do so may result in electric shock or re.
Instructions about the WEEE
Correct Disposal of This Product (Waste Electrical & Electronic
Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that
the product and its electronic accessories (e.g. charger, headset, USB
cable) should not be disposed of with other household waste at the
end of their working life. To prevent possible harm to the environment
or human health from uncontrolled waste disposal, please separate
these items from other types of waste and recycle them responsibly to
promote the sustainable reuse of material resources.
Household users should contact either the retailer where they
purchased this product, or their local government ofce, for details of
where and how they can take these items for environmentally safe
recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product and its electronic
accessories should not be mixed with other commercial wastes for
disposal.
For information on Samsung’s environmental commitments and product regulatory
obligations, e.g. REACH, WEEE or Batteries, visit our sustainability page available via www.
samsung.com
Ecodesign
For detailed instructions on installation and cleaning of the washing machine and ecodesign
information (according to (EU)2019/2023), visit the Samsung website (http://www.samsung.
com), go to Support > Support home, and then enter the model name.
WD80T4046CW_04215V-00_EN.indd 15 2021/8/10 17:17:38
16 English
Installation
Installation
Follow these instructions carefully to ensure proper installation of the washing machine and
to prevent accidents when doing laundry.
What’s included
Make sure all the parts are included in the product package. If you have a problem with
the washing machine or the parts, contact a local Samsung customer centre or the retailer.
01
02
12
11
10
09
03
04
06
08
07
05
01 Release lever 02 Detergent drawer 03 Control panel
04 Door 05 Drum 06 Lint lter
07 Emergency drain tube 08 Filter cover 09 Worktop
10 Power plug 11 Drain hose 12 Levelling feet
WD80T4046CW_04215V-00_EN.indd 16 2021/8/10 17:17:38
English 17
Installation
Spanner Bolt caps Hose guide
Cold water hose Hot water hose Liquid detergent container
Cap xer
Accessories (not supplied)
• Stacking kit: SKK-DF
- Staking kit is required to stack a dryer on a washing machine.
NOTE
• Spanner: For removing the shipping bolts and levelling the washing machine.
• Bolt caps : For covering the holes after removing the shipping bolts. The provided
number of bolt caps (3 to 6) depends on the model.
• Hose guide: For hanging the drain hose in the drainpipe or wash-basin.
• Cold/Hot water hose: For supplying water to the washing machine. (Hot water hoses is for
applicable models only.)
• Liquid detergent guide: Insert it in the detergent compartment to use liquid detergent.
(Applicable models only)
WD80T4046CW_04215V-00_EN.indd 17 2021/8/10 17:17:39
18 English
Installation
Installation
Installation requirements
Electrical supply and grounding
• Use an individual branch circuit specic
to the washing machine
To ensure proper grounding, the washing
machine comes with a power cord featuring
a three-prong grounding plug for use in a
properly installed and grounded outlet.
Check with a qualied electrician or
serviceperson if you are not sure about the
grounding.
Do not modify the provided plug. If it does
not t the outlet, call a qualied electrician
to install a proper outlet.
WARNING
• Do NOT use an extension cord.
• Use only the power cord that comes
with the washing machine.
• Do NOT connect the ground wire to
plastic plumbing, gas lines, or hot water
pipes.
• Improperly connected grounding
conductors may cause electric shock.
Water supply
A proper water pressure for this washing
machine is between 50 kPa and 1000 kPa.
Water pressure less than 50 kPa may cause
the water valve not to close completely. Or,
it may take longer to ll the drum, causing
the washing machine to turn off. Water taps
must be within 120 cm from the rear of the
washing machine so that the provided inlet
hoses reach the washing machine.
To reduce the risk of leaks:
• Make sure water taps are easily
accessible.
• Turn off the taps when the washing
machine is not in use.
• Check for any leaks at the water inlet
hose ttings on a regular basis.
CAUTION
Before using the washing machine for the
rst time, check all connections at the water
valve and taps for any leaks.
Drain
Samsung recommends a standpipe in
height of 60~90 cm. The drain hose must
be connected through the hose clip to the
standpipe, and the standpipe must fully
cover the drain hose.
WD80T4046CW_04215V-00_EN.indd 18 2021/8/10 17:17:39
English 19
Installation
Flooring
For best performance, the washing
machine must be installed on a solid oor.
Wood oors may need to be reinforced
to minimize vibration and/or unbalanced
loads. Carpeting and soft tile surfaces are
not a good resistance to vibrations and may
cause the washing machine to move slightly
during the spin cycle.
CAUTION
Do NOT install the washing machine on a
platform or a poorly supported structure.
Water temperature
Do not install the washing machine in areas
where water may freeze as the washing
machine always retains some water in its
water valves, pumps, and/or hoses. Frozen
water left in the connection parts may
cause damage to belts, the pump, and other
components of the washing machine.
Alcove or closet installation
Minimum clearance for stable operation:
Sides 25 mm
Top 25 mm
Rear 50 mm
Front 550 mm
If both the washing machine and a dryer
are installed in the same location, the front
of the alcove or closet must have at least
a 550 mm unobstructed air opening. Your
washing machine alone does not require a
specic air opening.
WD80T4046CW_04215V-00_EN.indd 19 2021/8/10 17:17:39
20 English
Installation
Installation
Step-by-step installation
STEP 1 Select a location
Location requirements:
• Solid, level surface without carpeting or ooring that may obstruct ventilation
• Away from direct sunlight
• Adequate room for ventilation and wiring
• The ambient temperature is always higher than the freezing point (0 ˚C)
• Away from a heat source
STEP 2 Remove the shipping bolts
Unpack the product package and remove all shipping bolts.
NOTE
Number of shipping bolts may differ depending on the model.
WARNING
• Packaging materials can be dangerous to children. Dispose all packaging material (plastic
bags, polystyrene, etc.) out of children’s reach.
• To avoid injury, cover the holes with bolt caps after removing the shipping bolts. Do not
move the washing machine without the shipping bolts in place. Assemble the shipping
bolts before moving the washing machine to another location. Keep the shipping bolts in
a safe place for future use.
WD80T4046CW_04215V-00_EN.indd 20 2021/8/10 17:17:39
English 21
Installation
A
1. Locate the shipping bolts (marked with
circle in the gure) on the rear side of
the washing machine.
CAUTION
Do not remove the screw (A) that xes the
hose clip.
2. Using the supplied spanner, loosen all
the shipping bolts by turning them
counterclockwise.
NOTE
You must keep the shipping bolts for future
use.
WD80T4046CW_04215V-00_EN.indd 21 2021/8/10 17:17:39
22 English
Installation
Installation
B
3. Insert the bolt caps (B) to the holes
(marked with circle in the gure).
STEP 3 Adjust the levelling feet
1. Gently slide the washing machine into
position. Excessive force may damage
the levelling feet.
2. Level the washing machine by manually
adjusting the levelling feet.
WD80T4046CW_04215V-00_EN.indd 22 2021/8/10 17:17:40
English 23
Installation
3. When levelling is complete, tighten the
nuts using the spanner.
CAUTION
When installing the product make sure the
levelling feet is not pressing the power cord.
CAUTION
Make sure all the levelling feet are seating on the oor surface to avoid the washing machine
from moving or generating noise due to vibration Then, check if the washing machine is not
rocking. If the washing machine is not rocking, tighten the nuts.
WD80T4046CW_04215V-00_EN.indd 23 2021/8/10 17:17:40
24 English
Installation
Installation
STEP 4 Connect the water hose
The provided water hose may differ depending on the model. Please follow the instruction
according to the provided water hose.
Connecting to a threaded water tap
1. Connect the water hose to the water tap,
and then turn the connector clockwise as
shown.
2. Connect the other end of the water
hose to the inlet valve on the back of
the washing machine. Turn the hose
clockwise to tighten.
3. Open the water tap and check if there
are any leaks around the connection
areas. If there are water leaks, repeat the
steps above.
WARNING
If there is a water leak, stop operating the washing machine and disconnect from the
electrical supply. Then, contact a local Samsung service centre in case of a leak from the
water hose, or contact a plumbing technician in case of a leak from the water tap. Otherwise,
this may cause electric shock.
WD80T4046CW_04215V-00_EN.indd 24 2021/8/10 17:17:40
English 25
Installation
CAUTION
Do not stretch the water hose by force. If the hose is too short, replace the hose with a
longer, high-pressure hose.
Connecting to a non-threaded water tap
A
B
1. Remove the adaptor (A) from the water
hose (B).
2. Use a Phillips screwdriver to loosen four
screws on the adaptor.
C
3. Hold the adaptor and turn part (C) in the
arrow direction to loosen it by 5 mm (*).
WD80T4046CW_04215V-00_EN.indd 25 2021/8/10 17:17:41
26 English
Installation
Installation
C
4. Insert the adaptor onto the water tap,
and then tighten the screws while lifting
the adaptor.
5. Turn part (C) in the arrow direction to
tighten it.
D
6. While pulling down part (D) on the
water hose, connect the water hose to
the adaptor. Then, release part (D). The
hose ts into the adaptor with a clicking
sound.
7. To complete connecting the water hose,
see 2 and 3 on the “Connecting to a
threaded water tap” section.
NOTE
• After connecting the water hose to the adaptor, pull the water hose down to check if it is
connected properly.
• Use a popular type of water taps. If the tap is square-shaped or too big, remove the
spacer ring before inserting the tap into the adaptor.
WD80T4046CW_04215V-00_EN.indd 26 2021/8/10 17:17:41
English 27
Installation
For models with an additional hot water inlet:
1. Connect the red end of the hot water
hose to the hot water inlet on the back
of the machine.
2. Connect the other end of the hot water
hose to the hot water tap.
Aqua stop hose (applicable models only)
A
The aqua stop hose alerts users of a risk of
water leaks. It senses the water ow and
turns red on the centre indicator (A) in case
of a leak.
NOTE
The end of the aqua stop hose must be tted to the water tap and not the machine.
WD80T4046CW_04215V-00_EN.indd 27 2021/8/10 17:17:41
28 English
Installation
Installation
STEP 5 Position the drain hose
The drain hose can be positioned in three ways:
A
Over the edge of a wash basin
The drain hose must be placed at a height
of between 60 cm and 90 cm (*) from the
oor. To keep the spout of the drain hose
bent, use the supplied plastic hose guide (A).
Secure the guide to the wall using a hook to
ensure stable drainage.
In a drain pipe
The drain pipe should be between 60 cm
and 90 cm high (*). It is advisable to use a
65 cm high vertical pipe.
• To ensure the drain hose stays in
position, use the plastic hose guide
provided (see the gure).
• To prevent the siphoning of water ow
during drainage, make sure to insert the
drain hose 15 cm in the drain pipe.
• To prevent the drain hose from moving
around, secure the hose guide to the
wall.
Drain standpipe requirements:
• Minimum diameter of 5 cm
• Minimum carry-away capacity of 60
litres per minute
WD80T4046CW_04215V-00_EN.indd 28 2021/8/10 17:17:41
English 29
Installation
In a sink drain pipe branch
The drain pipe branch mush be above the
sink siphone so that the end of the hose is
at least 60 cm above the ground.
(*) : 60 cm
CAUTION
Remove the lid on the sink drain pipe
branch before connecting the drain pipe to
it.
STEP 6 Turn on the washing machine
Plug the power cord into a wall socket that is correctly rated, grounded, and protected by a
fuse or circuit breaker. Then, press Power to turn on the washing machine.
A
NOTE
Door latch (lever) (A) is originally designed
to be loose a little, because it may make
the door latch be inserted into the door
more easily.
NOTE
If the door is locked during installation, plug the power cord, and turn on the power. The
door will unlock.
WD80T4046CW_04215V-00_EN.indd 29 2021/8/10 17:17:42
30 English
Before you start
Before you start
NOTE
Before doing your laundry for the rst time, you must run a complete wash cycle without any
items in the drum.
Initial settings
Run Calibration (recommended)
Calibration ensures accurate weight detection by the washing machine. Make sure the drum
is empty before running Calibration.
1. Power off, and then power on the washing machine.
2. Hold down
Temp. and Delay End simultaneously for 3 seconds to enter
Calibration mode. The “CB” message appears.
3. Press Start/Pause to run the Calibration cycle.
4. The drum will rotate clockwise and counter-clockwise for about 3 minutes.
5. When the cycle is complete, “0” appears on the display and the washing machine will turn
off automatically.
6. The washing machine is now ready for use.
Laundry guidelines
STEP 1 Sort
Sort the laundry according to these criteria:
• Care Label: Sort the laundry into cottons, mixed bres, synthetics, silks, wools, and rayon.
• Colour: Separate whites from colours.
• Size: Mixing different-sized items together in the drum improves the washing
performance.
• Sensitivity: Wash delicate items separately using an Easy Iron option for pure, new
woollen items, curtains, and silk items. Check the labels on the items.
NOTE
Make sure to check the care label on the clothing, and sort them accordingly before starting
the wash.
STEP 2 Empty pockets
Empty all the pockets of your laundry items
• Metal objects such as coins, pins, and buckles on clothing may damage other laundry
items as well as the drum.
WD80T4046CW_04215V-00_EN.indd 30 2021/8/10 17:17:42
English 31
Before you start
Turn clothing with buttons and embroideries inside out
• If pants or jacket zippers are open while washing, the drum may be damaged. Zippers
should be closed and xed with a string.
• Clothing with long strings may become entangled with other clothes. Make sure to tie the
strings before starting the wash.
STEP 3 Use a laundry net
• Brassieres (water washable) must be placed in a laundry net. Metal parts of the brassieres
may break through and tear other laundry items.
• Small, light clothing such as socks, gloves, stockings, and handkerchiefs may become
caught around the door. Place them inside a ne laundry net.
• Do not wash the laundry net by itself without other laundry. This may cause abnormal
vibrations that could move the washing machine and result in injury.
STEP 4 Prewash (if necessary)
Select the Prewash option for the selected cycle if the laundry is heavily soiled. Do not use
the Prewash option when detergent is manually added into the drum.
STEP 5 Determine the load capacity
Do not overload the washing machine. Overloading may cause the washing machine to not
wash properly. For the load capacity for the type of clothing, see page 40.
NOTE
When washing bedding or bedding covers, the wash time may be lengthened or the spin
efciency may be reduced. For bedding or bedding covers, the recommended maximum spin
cycle speed is 800 rpm, and the load capacity is 2 kg or less.
CAUTION
• Unbalanced laundry may reduce the spinning performance.
• Make sure the laundry is fully inserted in the drum and not caught in the door.
• Do not slam the door. Close the door gently. Otherwise, the door may not be closed
properly.
STEP 6 Apply a proper detergent type
The type of detergent depends on the type of fabric (cotton, synthetic, delicate items, wool),
colour, wash temperature, and degree of soiling. Always use “low suds” laundry detergent,
which is designed for automatic washing machines.
WD80T4046CW_04215V-00_EN.indd 31 2021/8/10 17:17:42
32 English
Before you start
Before you start
NOTE
• Follow the detergent manufacturer’s recommendations based on the weight of the
laundry, the degree of soiling, and the hardness of the water in your local area. If you are
not sure about the water hardness, contact a local water authority.
• Do not use detergent that tends to be hardened or solidied. This detergent may remain
after the rinse cycle, blocking the drain outlet.
CAUTION
When washing wool using the WOOL/DELICATES cycle, use only a neutral liquid detergent.
If used with the WOOL/DELICATES cycle, powder detergent may remain on the laundry and
discolour the laundry.
Laundry capsules
To get the best results from using laundry capsules, please follow these instructions.
1. Put the capsule in the bottom of the
empty drum towards the rear.
2. Put the laundry in the drum on top of
the capsule.
CAUTION
For cycles using cold water or cycles that complete in less than one hour, the capsule may not
dissolve completely.
WD80T4046CW_04215V-00_EN.indd 32 2021/8/10 17:17:42
English 33
Before you start
Detergent recommendation
The recommendations apply to the temperature ranges given in the cycle chart.
Recommended Liquid detergent only
–Not recommended Powder detergent only
Cycle Detergent Temp.(oC)
Universal Delicates and woollens Specialist
ECO 40-60
– – 40~60
COTTON
– – Cold~90
SYNTHETICS
– – Cold~60
HYGIENE STEAM
– – Cold~90
15’ QUICK WASH
– – Cold~40
MIXED LOAD
– – Cold~60
WOOL/DELICATES
––Cold~40
WASH+DRY
– – 40~60
WD80T4046CW_04215V-00_EN.indd 33 2021/8/10 17:17:43
34 English
Before you start
Before you start
Detergent drawer guidelines
The washing machine provides a three-compartment dispenser: the left compartment for the
main wash, the centre compartment for fabric softeners, and the right compartment for the
preliminary wash.
A
01 Prewash compartment: Apply
prewash detergent.
02 Main-wash compartment: Apply
main-wash detergent, water softener,
soaking detergent, bleach, and/or stain
removers.
03 Softener compartment: Apply
additives such as fabric softener. Do not
exceed the max line (A).
CAUTION
• Do not open the detergent drawer while the washing machine is operating.
• Do not use the following types of detergent:
• Tablet or capsule types
• Ball or net types
• To prevent the compartment clogging, concentrated or highly-enriched agents (fabric
softener or detergent) must be diluted with water before being applied.
• When Delay End is selected, do not apply detergent directly into the drum. Otherwise,
this may discolour the laundry. Use the detergent drawer when Delay End is selected.
• Do not use any cleaning agents for cleaning the drum. Chemical residue in the drum
deteriorates the washing performance.
• Be careful not to spill fabric softener on the worktop or the control panel.
WD80T4046CW_04215V-00_EN.indd 34 2021/8/10 17:17:43
English 35
Before you start
To apply washing agents to the detergent drawer
A
1. Slide open the detergent drawer.
Apply laundry detergent to the .
main-wash compartment as instructed
or recommended by the manufacturer.
To use liquid detergent, see page 36.
Do not exceed the max line (A) when
adding detergent.
A
2. Apply fabric softener to the softener
compartment. Do not exceed the max
line (A).
3. If you want to prewash, apply
prewash detergent to the prewash
compartment as instructed or
recommended by the manufacturer.
4. Close the detergent drawer.
WD80T4046CW_04215V-00_EN.indd 35 2021/8/10 17:17:43
36 English
Before you start
Before you start
CAUTION
• Do not apply powder detergent to the
liquid container.
• Concentrated fabric softener must be
diluted with water before applied.
• Do not apply main-wash detergent to
the softener compartment.
To use liquid detergent (applicable models only)
A
First insert the provided liquid container
in the main-wash compartment. Then,
apply liquid detergent to the container
below the marked max line (A).
CAUTION
• Do not exceed the max line that is
marked inside the container.
• Turn up the liquid container if using
powder detergent.
When using liquid detergent When using powder detergent
WD80T4046CW_04215V-00_EN.indd 36 2021/8/10 17:17:43
English 37
Before you start
Operations
Control panel
09
02
08
03 04 05 06 07
01
01 Cycle Selector Turn the dial to select a cycle.
02 Display
The display shows current cycle information and estimated time
remaining, or an information code when a problem occurs.
NOTE
The actual washing time may differ from the estimated time initially
displayed on the control panel upon cycle selection.
03 Temp. Press to change the water temperature for the current cycle.
04 Spin
Press to change the spinning speed for the selected cycle.
• Rinse Hold (No indicator): The nal rinse cycle is suspended so
that the laundry remains in the water. To unload the laundry, run
a drain or spin cycle.
• No Spin : The drum does not spin after the nal drain cycle.
• Spin Only : To run the Spin Only cycle, press Spin for 3
seconds. When the cycle time and spinning speed appear, press
Spin repeatedly until a desired spinning speed is selected. Then,
press Start/Pause to start the cycle. The spinning time depends
on the selected cycle.
05 Dry Option Press this button to select proper drying option.
06
Delay End
Delay End lets you set the end time of the current cycle. Based
on your settings, the start time of the cycle will be determined
by the machine’s internal logic. For example, this setting is useful
for programming your machine to nish a wash at the time you
normally return home from work.
• Press to choose a preset unit of hours.
WD80T4046CW_04215V-00_EN.indd 37 2021/8/10 17:17:44
38 English
Operations
Operations
07 Options Press to select the options. Availability of the options depends on
the cycle.
08
Start/Pause Press to start or stop operation.
09
Power Press to turn on/off the washing machine.
For more information on the options, see the Special features section.
*(3 sec) : Press and hold for 3 seconds.
Simple steps to start
34
1
6
2
5
1. Press
Power to turn on the washing machine.
2. Turn the Cycle Selector to select a cycle.
3. Change the cycle settings ( Temp., Spin and Dry Option) as necessary.
4. The machine provides one easy to access buttons for
Delay End for your convenience.
If you want to use the option, press the corresponding button.
5. To add an option, press Options. Use the button again to choose a preferred item.
6. Press
Start/Pause.
WD80T4046CW_04215V-00_EN.indd 38 2021/8/10 17:17:44
English 39
Operations
Drying Only
1
4
3
2
You can dry your clothes directly or dry the washed clothes according to the following
procedures.
1. Press
Power button to turn on the washing machine.
2. Turn the Cycle Selector to select COTTON DRY cycle.
3. Press Dry Option button to select the appropriate drying mode.
4. Press
Start/Pause button to start dry.
To change the cycle during operation
1. Press Start/Pause to stop operation.
2. Select a different cycle.
3. Press Start/Pause again to start the new cycle.
WD80T4046CW_04215V-00_EN.indd 39 2021/8/10 17:17:44
40 English
Operations
Operations
Cycle overview
Standard cycles
Cycle Description & Max load (kg)
WD8*T4*****
WD7*T4*****
ECO 40-60
• For cleaning normally soiled cotton items which are
declared to be washable at 40 °C or 60 °C, together
in the same cycle. This cycle is used to assess the
compliance with the EU Ecodesign legislation.
• This cycle is set as a default.
Max Max
COTTON
• For cottons, bed linens, table linens, underwear,
towels, or shirts. The washing time and the rinse
count are automatically adjusted according to the
load.
• For cleaning lightly soiled cotton items at a nominal
temperature of 20 °C.
Max Max
SYNTHETICS • For fabrics that are made of polyester(diolen,
trevira), polyamide (perlon, nylon), or the like. 4.0 3.5
HYGIENE STEAM
• Cotton and linen fabric which have been in direct
contact with the skin, such as underwear.
• For optimum hygiene results select a temperature of
60 °C or above.
• Steam cycles feature allergy care and bacteria
elimination (sterilize).
4.0 3.5
RINSE+SPIN • Featuring an additional rinse process after applying
fabric softener to the laundry. Max Max
DRUM CLEAN
• Cleans the drum by removing dirt and bacteria from
it.
• Perform once every 40 washes with no detergent or
bleach applied. It noties automatically after every
40 washes.
• Make sure the drum is empty.
• Do not use any cleaning agents for cleaning the
drum.
- -
WD80T4046CW_04215V-00_EN.indd 40 2021/8/10 17:17:44
English 41
Operations
Cycle Description & Max load (kg)
WD8*T4*****
WD7*T4*****
15’ QUICK WASH
• For lightly soiled items in less than 2.0 kg that you
want to wash quickly.
• Use less than 20 g of detergent. Using more than 20
g of detergent may leave detergent residue.
• For liquid detergent, use a max of 20 ml of liquid
detergent.
2.0 2.0
MIXED LOAD • For mixed load consisting of cotton and synthetic. 4.0 3.5
WOOL/ DELICATES
• Specic for machine-washable wool and delicates
fabrics such as sheer fabrics, bras, lingerie (silk), and
other handwash-only fabrics.
• The WOOL/DELICATES cycle features gentle cradling
and soaking to protect bres from shrinkage/
distortion.
• A neutral detergent and liquid detergent is
recommended.
2.0 2.0
Dry cycles
Cycle Description & Max load (kg)
COTTON DRY • For general drying. 5.0 4.0
AIR WASH • This cycle is useful for removing bad odours. 1.0 1.0
WASH+DRY
• For cleaning normally soiled cotton items which are
declared to be washable at 40 °C or 60 °C, together
in the same cycle, and to dry them in such a way
that it can be immediately stored in a cupboard. This
cycle is used to assess the compliance with the EU
Ecodesign legislation for wash and dry.
5.0 4.0
WD80T4046CW_04215V-00_EN.indd 41 2021/8/10 17:17:45
42 English
Operations
Operations
NOTE
• Loading the household washing machine or the household washer-dryer up to the
capacity indicated by the manufacturer for the respective cycles will contribute to energy
and water savings.
• The noise and remaining moisture content are inuenced by the spinning speed: the
higher the spinning speed in the spinning phase, the higher the noise and the lower the
remaining moisture content.
• The most efcient cycle in terms of energy consumption are generally those that perform
at lower temperatures and longer duration.
Options
Option Description
Intensive • For badly soiled laundry. The operation time for each cycle is
longer than normal.
Pre Wash • This will add a preliminary washing cycle before the main
wash cycle.
Rinse+ • Press this button to add additional rinse cycles.
Bubble Soak
• Bubble Soak helps remove a variety of stubborn stains.
• With Bubble Soak selected, laundry is thoroughly soaked in
water bubbles for effective washing.
• Bubble Soak is available with and adds up to 30 minutes to
5 cycles: Cotton, Synthetics, Hygiene Steam, Mixed Load and
Wash+Dry.
Dry Option
Option Description
Cupboard dry
• Select to dry laundry automatically by detecting the amount
and weight of the laundry. Select this to dry cotton clothing
such as cotton trousers, T-shirts, and cotton underwear.
Time Dry • Use to dry the laundry for a specied period of time
according to the material, load, and moisture.
WD80T4046CW_04215V-00_EN.indd 42 2021/8/10 17:17:46
English 43
Operations
Delay End
You can set the washing machine to nish your wash automatically at a later time, choosing a
delay of between 1 to 24 hours (in 1 hour increments). The hour displayed indicates the time
the wash will nish.
1. Select a cycle. Then change the cycle settings if necessary.
2. Press Delay End repeatedly until a desired end time is set.
3. Press Start/Pause.
The corresponding indicator turns on with the clock running.
4. To cancel the Delay End, restart the washing machine by pressing Power.
Real-life case
You want to nish a two-hour cycle 3 hours later from now. For this, you add the Delay End
option to the current cycle with the 3-hour setting, and press Start/Pause at 2:00 p.m. Then,
what happens? The washing machine starts operating at 3:00 p.m., and ends at 5:00 p.m.
Provided below is the time line for this example.
2:00 pm
Set the Delay End to 3 hours
3:00 pm
Start
5:00 pm
End
WD80T4046CW_04215V-00_EN.indd 43 2021/8/10 17:17:46
44 English
Operations
Operations
Settings
Child Lock
To prevent children or infants from
accidentally starting or setting the washing
machine, Child Lock locks all buttons except
for the Power button.
• To set the Child Lock function, hold down
Temp. and Spin simultaneously for
3 seconds. To activate, press
Start/ Pause.
• To release the Child Lock function,
hold down Temp. and Spin
simultaneously for 3 seconds.
NOTE
• In the Child Lock state, you must rst
release the Child Lock if you want to add
detergent or laundry.
• Your setting will be kept even after
restarting the machine.
• You cannot open the door after a wash
cycle when the Child Lock is on. Turn the
function off before opening the door to
take out the laundry.
Alarm Off
You can turn on or off the melody of cycle
completion. However, the other sounds stay
active.
• To mute the alarm, hold down Spin
and Dry Option simultaneously for
3 seconds.
• To unmute the alarm, hold down again
for 3 seconds.
WD80T4046CW_04215V-00_EN.indd 44 2021/8/10 17:17:46
English 45
Maintenance
Maintenance
Keep the washing machine clean to prevent deteriorated performance and to preserve its life
cycle.
Drum clean
Perform this cycle regularly to clean the drum by removing bacteria from it. This cycle heats
the water between 60 °C and 70 °C, and it also removes accumulated dirt from the rubber
door gasket.
1. Press Power to turn on the washing machine.
2. Turn the Cycle Selector to select DRUM CLEAN.
3. Press Start/Pause.
NOTE
• The water temperature for DRUM CLEAN is set to 70 °C, which cannot be changed.
• It is recommended to run the DRUM CLEAN cycle once every 40 washes.
• To prevent limescale, add the proper amount of detergent according to your local water
hardness or add a water softener additive together with the detergent.
DRUM CLEAN reminder
Depending on the model, the DRUM CLEAN reminder is either an icon or an LED.
For icons, the icon lights up on the control panel.
For LEDs, the LED lights up next to DRUM CLEAN, or on the option area of the control panel.
• The DRUM CLEAN reminder blinks on the control panel once every 40 washes. It is
advisable to perform DRUM CLEAN regularly.
• When you rst see this reminder blinking, you can ignore the reminder for 6 consecutive
washes. From the 7th wash, the reminder no longer appears. However, it appears again on
the second 40th wash.
• Even after the last process is terminated, the “0” message may remain.
• You can record the running count of the DRUM CLEAN cycle by pressing the Power
button. This does not stop or turn off the machine but marks your cycle count.
• Even if “0” does not disappear, the machine operates normally.
• It is recommended to run the cycle regularly for hygienic purposes.
WD80T4046CW_04215V-00_EN.indd 45 2021/8/10 17:17:46
46 English
Maintenance
Maintenance
Smart check
To enable this function, you must rst download the Samsung Smart Washer app at the Play
Store or the Apple Store, and install it on a mobile device featuring a camera function.
The Smart Check function has been optimized for Galaxy & iPhone series (applicable models
only).
1. When the washing machine detects an issue to check, an information code appears on
the display. To enter Smart Check mode, press and hold Dry Option and
Delay End
simultaneously for 3 seconds.
2. The washing machine starts the self-diagnosis procedure and displays an information
code if a problem is detected.
3. Run the Samsung Smart Washer app on your mobile device, and tap Smart Check.
4. Put the mobile device close to the washing machine’s display so that the smartphone
camera and the washing machine face each other. Then, the information code will be
recognised automatically by the app.
5. When the information code is recognised correctly, the app provides detailed information
about the problem with applicable solutions.
NOTE
• The function name, Smart Check, may differ depending on the language.
• If the washing machine reets light on the display, the app may fail to recognize the
information code.
• If the app fails to recognize the Smart Check code consecutively, enter the information
code manually onto the app screen.
WD80T4046CW_04215V-00_EN.indd 46 2021/8/10 17:17:47
English 47
Maintenance
Emergency drain
In case of a power failure, drain the water inside the drum before taking out the laundry.
A
1. Power off and unplug the washing
machine from the electrical outlet.
2. Gently press the top area of the lter
cover (A) to open.
B
3. Put an empty, spacious container around
the cover, and stretch the emergency
drain tube to the container while holding
the tube cap (B).
4. Open the tube cap and let water in the
Emergency drain tube (C) ow into the
container.
5. When done, close the tube cap, and
reinsert the tube. Then, close the lter
cover.
NOTE
Use a spacious container because the water
in the drum may be more than expected.
WD80T4046CW_04215V-00_EN.indd 47 2021/8/10 17:17:47
48 English
Maintenance
Maintenance
Cleaning
Surface of the washing machine
Use a soft cloth with a nonabrasive household detergent. Do not spray water onto the
washing machine.
Mesh lter
Clean the mesh lter of the water hose once or twice a year.
1. Turn off the washing machine, and
unplug the power cord.
2. Close the water tap.
3. Loosen and disconnect the water hose
from the back of the washing machine.
Cover the hose with a cloth to prevent
water from gushing out.
4. Use pliers to pull out the mesh lter
from the inlet valve.
5. Submerge the mesh lter deeply in
water so that the threaded connector is
also submerged.
6. Dry the mesh lter completely in the
shade.
7. Reinsert the mesh lter into the inlet
valve, and reconnect the water hose to
the inlet valve.
8. Open the water tap.
NOTE
If the mesh lter is clogged, an information code of “4C” appears on the screen.
WD80T4046CW_04215V-00_EN.indd 48 2021/8/10 17:17:47
English 49
Maintenance
Debris lter
Clean the debris lter bi-monthly to prevent clogging. A clogged debris lter may reduce the
bubble effect.
1. Turn off the washing machine, and
unplug the power cord.
2. Drain the remaining water inside the
drum. See the “Emergency drain”
section.
3. Gently press the top area of the lter
cover to open.
4. Turn the debris lter knob to the left,
and drain off the remaining water.
5. Clean the debris lter using soft brushes.
Make sure the drain pump propeller
inside the lter is unclogged.
6. Reinsert the debris lter, and turn the
lter knob to the right.
NOTE
• Some debris lters feature a safety knob
that is designed to prevent accidents
by children. To open the safety knob
of the debris lter, push in and turn it
anticlockwise. The spring mechanism of
the safety knob helps open the lter.
• To close the safety knob of the debris
lter, turn it clockwise. The spring makes
a rattling sound, which is normal.
NOTE
If the debris lter is clogged, an information code of “5C” appears on the screen.
CAUTION
• Make sure the lter cap is closed properly after cleaning the lter. Otherwise, this may
cause a leak.
WD80T4046CW_04215V-00_EN.indd 49 2021/8/10 17:17:47
50 English
Maintenance
Maintenance
• Make sure the lter is inserted properly after cleaning it. Otherwise, this may cause an
operational failure or a leak.
Detergent Drawer
A
1. While holding down the release lever (A)
on the inner of the drawer, slide open
the drawer.
2. Clean the drawer components in owing
water using a soft brush.
3. Clean the drawer recess using a bottle
brush to remove detergent residues and
limescale on the drawer recess.
4. Reinsert the release lever and the liquid
detergent container to the drawer.
5. Slide the drawer inward to close it.
NOTE
To remove remaining detergent, perform the RINSE+SPIN cycle with the drum being empty.
WD80T4046CW_04215V-00_EN.indd 50 2021/8/10 17:17:47
English 51
Maintenance
Recovery from freezing
The washing machine may freeze when it drops below 0 °C.
1. Turn off the washing machine, and unplug the power cord.
2. Pour warm water over the water tap to loosen the water hose.
3. Disconnect the water hose, and soak it in warm water.
4. Pour warm water into the drum and leave it for about 10 minutes.
5. Reconnect the water hose to the water tap.
NOTE
If the washing machine still doesn’t operate normally, repeat the above steps until it operates
normally.
Care against an extended time of disuse
Avoid leaving the washing machine unused for an extended time.
If this is the case, drain the washing machine and unplug the power cord.
1. Turn the Cycle Selector to select a RINSE+SPIN.
2. Empty the drum, and press Start/Pause.
3. When the cycle is complete, close the water tap and disconnect the water hose.
4. Turn off the washing machine, and unplug the power cord.
5. Open the door to let air circulate through the drum.
WD80T4046CW_04215V-00_EN.indd 51 2021/8/10 17:17:48
52 English
Troubleshooting
Troubleshooting
If there is any problem, check the information message on the LED screen and follow the on-
screen instructions.
If the problem persists, please contact the service center.
Checkpoints
If you encounter a problem with the washing machine, rst check the table below and try the
suggestions.
Problem Action
Does not start.
• Make sure the washing machine is plugged in.
• Make sure the door is properly closed.
• Make sure the water taps are open.
• Tap
Start/Pause to start the washing machine.
• Make sure Child Lock
is not activated.
• Before the washing machine starts to ll, it will make a series
of clicking noises to check the door lock and will do quick
drain.
• Check the fuse or reset the circuit breaker.
• Check if power is supplied properly.
• Low voltage detected.
- Check if the power cord is plugged in.
• Make sure laundry is not caught in the door.
Water supply is
insufcient, or no
water is supplied.
• Fully open the water tap.
• Make sure the door is properly closed.
• Make sure the water supply hose is not frozen.
• Make sure the water supply hose is not kinked or clogged.
• Make sure there is sufcient water pressure.
• Make sure that the cold water tap and the hot water tap are
properly connected.
• Clean the mesh lter as it may be clogged.
After a cycle,
detergent remains in
the detergent drawer.
• Make sure the washing machine is running with sufcient
water pressure.
• Make sure the detergent is added to the centre of the
detergent drawer.
• Make sure the rinse cap is inserted properly.
• If using granular detergent, make sure the detergent selector is
in the upper position.
• Remove the rinse cap and clean the detergent drawer.
WD80T4046CW_04215V-00_EN.indd 52 2021/8/10 17:17:48
English 53
Troubleshooting
Problem Action
Excessive vibrations
or makes noise.
• Make sure the washing machine is installed on a level, solid
oor that is not slippery.
If the oor is not level, use the levelling feet to adjust the
height of the washing machine.
• Make sure the shipping bolts are removed.
• Make sure the washing machine is not in contact with any
other object.
• Make sure the laundry load is balanced.
• The motor can cause noise during normal operation.
• Overalls or clothes with metallic decorations can cause noise
while being washed. This is normal.
• Metal objects such as coins can cause noise. After washing,
remove these objects from the drum or lter case.
• Redistribute the load. If only one item of clothing needs
washing, such as a bathrobe or pair of jeans, the nal spin
result might be unsatisfactory, and a “Ub” check message will
be shown in the display.
Does not drain and/
or spin.
• Make sure the drain hose is straightened all the way to the
drain system. If you encounter a drain problem, call for service.
• Make sure the debris lter is not clogged.
• Close the door and press or tap Start/Pause.
For your safety, the washing machine will not tumble or spin
unless the door is closed.
• Make sure the drain hose is not frozen or clogged.
• Make sure the drain hose is connected to a drain system that is
not clogged.
• If the washing machine is not supplied with sufcient power,
the washing machine temporarily will not drain or spin. As
soon as the washing machine regains sufcient power, it will
operate normally.
• Make sure the drain hose is positioned correctly, depending on
the connection type.
• Clean the debris lter as it may be clogged.
WD80T4046CW_04215V-00_EN.indd 53 2021/8/10 17:17:48
54 English
Troubleshooting
Troubleshooting
Problem Action
The door does not
open.
• Press or tap Start/Pause to stop the washing machine.
• It may take a few moments for the door lock mechanism to
disengage.
• The door will not open until 3 minutes after the washing
machine has stopped or the power has been off.
• Make sure all the water in the drum is drained.
• The door may not open if water remains in the drum. Drain the
drum and open the door manually.
• Make sure the door lock light is off. The door lock light turns
off after the washing machine has drained.
Excessive suds.
• Make sure you use the recommended types of detergent as
appropriate.
• Use high efciency (HE) detergent to prevent oversudsing.
• Reduce the detergent amount for soft water, small loads, or
lightly soiled loads.
• Non-HE detergent is not recommended.
Cannot apply
additional detergent.
• Make sure the remaining amount of detergent and fabric
softener is not over the limit.
Stops.
• Plug the power cord into a live electrical outlet.
• Check the fuse or reset the circuit breaker.
• Close the door and press or tap Start/Pause to start the
washing machine.
For your safety, the washing machine will not tumble or spin
unless the door is closed.
• Before the washing machine starts to ll, it will make a series
of clicking noises to check the door lock and will do quick
drain.
• There may be a pause or soak period in the cycle. Wait briey,
and the washing machine may start.
• Make sure the mesh lter of the water supply hose at the
water taps is not clogged. Periodically clean the mesh lter.
• If the washing machine is not supplied with sufcient power,
the washing machine will temporarily not drain or spin. As
soon as the washing machine regains sufcient power, it will
operate normally.
WD80T4046CW_04215V-00_EN.indd 54 2021/8/10 17:17:48
English 55
Troubleshooting
Problem Action
Fills with the wrong
water temperature.
• Fully open both taps.
• Make sure the temperature selection is correct.
• Make sure the hoses are connected to the correct taps. Flush
water lines.
• Make sure the water heater is set to supply a minimum of
49 °C hot water at the tap. Also, check the water heater
capacity and recovery rate.
• Disconnect the hoses and clean the mesh lter. The mesh lter
may be clogged.
• While the washing machine lls, the water temperature may
change as the automatic temperature control feature checks
incoming water temperature. This is normal.
• While the washing machine lls, you may notice just hot and/
or just cold water going through the dispenser when cold or
warm temperatures are selected.
This is a normal function of the automatic temperature
control feature as the washing machine determines the water
temperature.
Load is wet at the
end of a cycle.
• Use the High or Extra High spin speed.
• Use high efciency (HE) detergent to reduce oversudsing.
• Load is too small. Small loads (one or two items) may become
unbalanced and not spin completely.
• Make sure the drain hose is not kinked or clogged.
Leaks water.
• Make sure the door is properly closed.
• Make sure all hose connections are tight.
• Make sure the end of the drain hose is correctly inserted and
secured to the drain system.
• Avoid overloading.
• Use high efciency (HE) detergent to prevent oversudsing.
• Check the drain hose.
- Make sure the end of the drain hose is not placed on the
oor.
- Make sure the drain hose is not clogged.
Has odours.
• Excessive suds collect in recesses and can cause foul odours.
• Run cleansing cycles to sanitize periodically.
• Clean the door seal (diaphragm).
• Dry the washing machine interior after a cycle has nished.
WD80T4046CW_04215V-00_EN.indd 55 2021/8/10 17:17:48
56 English
Troubleshooting
Troubleshooting
Problem Action
No bubbles are seen
(Bubble models only).
• You may not be able to see bubbles if there is too much items
in the drum.
• Severely contaminated laundry may not generate bubbles.
Increased time of
washing
• The actual washing time may differ from the estimated time
initially displayed on the control panel upon cycle selection.
• If a problem persists, contact a service center. The number of the service center is on the
label attached to the product.
• Samsung is not liable for any damage to the product, any injury, or any other product
safety issue caused by a repair which does not follow the instructions in these Repair
Guides. Any damage to the product caused by an attempted repair (by anyone other than
a Samsung certied service provider) will also not be covered by the warranty.
Information codes
If the washing machine fails to operate, you may see an information code on the screen.
Check the table below and try the suggestions.
Code Action
4C
Water is not supplied.
• Make sure the water taps are open.
• Make sure the water hoses are not clogged.
• Make sure the water taps are not frozen.
• Make sure the washing machine is operating with sufcient
water pressure.
• Make sure that the cold water tap and the hot water tap are
properly connected.
• Clean the mesh lter as it may be clogged.
• When the “4C” message appears, the machine drains water for
3 minutes. In the meantime, the power button will be disabled.
4C2
• Make sure the cold water supply hose is rmly connected to
the cold water tap.
If it is connected to the hot water tap, the laundry may be
deformed with some cycles.
WD80T4046CW_04215V-00_EN.indd 56 2021/8/10 17:17:48
English 57
Troubleshooting
Code Action
5C
Water is not draining.
• Make sure the drain hose is not frozen or clogged.
• Make sure the drain hose is positioned correctly, depending on
the connection type.
• Clean the debris lter as it may be clogged.
• Make sure the drain hose is straightened all the way to the
drain system.
• If the information code remains, contact a customer service
centre.
dC
Operating the washer with the door open.
• Make sure the door is properly closed.
• Make sure laundry is not caught in the door.
OC
Water has overowed.
• Restart after spinning.
• If the information code remains on the display, contact a local
Samsung service centre.
LC, LC1
Check the drain hose.
• Make sure the end of the drain hose is not placed on the oor.
• Make sure the drain hose is not clogged.
• If the information code remains, contact a customer service
centre.
3C
Check the Motor for operation.
• Try restarting the cycle.
• If the information code remains, contact a customer service
centre.
UC
Check the pulsator motor for operation.
• Check if power is supplied properly.
• If the information code remains, contact a customer service
centre.
Low voltage detected.
• Check if the power cord is plugged in.
• If the information code remains, contact a customer service
centre.
WD80T4046CW_04215V-00_EN.indd 57 2021/8/10 17:17:48
58 English
Troubleshooting
Troubleshooting
Code Action
HC
High temperature heating check.
• If the information code remains, contact a customer service
centre.
1C
The Water Level sensor is not working properly.
• Try power off and restarting the cycle.
• If the information code remains, contact a customer service
centre.
• When the “4C” message appears,
the washer do draining for 3
minutes. During this time, the Power button is inoperative.
AC
Check communications between main and sub PBAs.
• Turn the machine off, and restart the cycle.
• If the information code remains, contact a customer service
centre.
FC
The drying fan motor is not working properly.
• Turn the machine off, and restart the cycle.
• If the information code remains, contact a local Samsung
service centre.
0
The machine does not turn off automatically after the last
spinning process, and the “0” message remains.
• The machine operates normally without running the DRUM
CLEAN cycle. However, it is recommended to run the cycle for
hygienic purposes.
If any information code keeps appearing on the screen, contact a local Samsung service
centre.
WD80T4046CW_04215V-00_EN.indd 58 2021/8/10 17:17:48
English 59
Specications
Specications
Fabric care chart
The following symbols provide garment care
direction. The Clothing care labels include
symbols for drying, bleaching, drying and
ironing, or dry cleaning when necessary. The
use of symbols ensures consistency among
garment manufacturers of domestic and
imported items.
Follow care label directions to maximize
garment life and reduce laundering
problems.
Washing
95 °C boil wash.
60 °C coloured wash.
60 °C coloured wash. (“Easy
care” coloured wash)
40 °C coloured wash.
40 °C mild wash.
40 °C very mild wash.
30 °C ne wash.
30 °C mild ne wash.
30 °C very mild ne wash.
Hand wash.
Do not wash.
NOTE
The numbers in the wash tub specify
the maximum washing temperatures in
degrees celsius Celsius which must not be
exceeded.
Bleaching
Any bleach allowed.
Only oxygen bleach allowed.
Do not bleach.
Drying
Tumble drying / Drying at a
temperature of 80 °C with a
normal drying process.
Tumble drying / Drying at a
temperature of 60 °C with a
mild drying process.
Do not tumble dry
Line drying.
Drip line drying.
Flat drying.
Drip at drying.
Line drying in the shade.
Drip line drying in the shade.
Flat drying in the shade.
Drip at drying in the shade.
NOTE
• The dots indicate the drying level of
the dryer.
• The
lines indicate the type and place of
the drying.
WD80T4046CW_04215V-00_EN.indd 59 2021/8/10 17:17:53
60 English
Specications
Specications
Ironing
Iron at maximum sole plate
temperature of 200 °C.
Iron at maximum sole plate
temperature of 150 °C.
Iron at maximum sole plate
temperature of 110 °C.
Caution when using steam
irons (work without steam).
Do not iron.
NOTE
The dots indicate the temperature ranges
for ironing (regulator, steam, travel irons
and ironing machines).
Professional care
Professional dry-cleaning
in perchloroethylene and/
or hydrocarbons (heavy
benzines) with normal
process.
Professional dry-cleaning
in perchloroethylene and/
or hydrocarbons (heavy
benzines) with gentle
process.
Professional dry-cleaning
in hydrocarbons (heavy
benzines) with normal
process.
Professional dry-cleaning
in hydrocarbons (heavy
benzines) with gentle
process.
Do not dry-clean.
Professional wet-cleaning.
Mild professional wet-
cleaning.
Very mild professional wet-
cleaning.
Do not wet-clean.
NOTE
• The letters in a circle indicate the
solvents (P, F) used in dry cleaning or
wet cleaning (W).
• Generally, the line under the symbol
indicates a milder treatment (e.g.
gentle cycle for easycare items). The
double line indicates care levels with
particularly gentle treatment.
WD80T4046CW_04215V-00_EN.indd 60 2021/8/10 17:17:55
English 61
Specications
Protecting the environment
• This appliance is m
anufactured from recyclable materials. If you decide to dispose of this
appliance, please observe local waste disposal regulations. Cut off the power cord so that the
appliance cannot be connected to a power source. Remove the door so that animals and small
children cannot get trapped inside the appliance.
• Do not exceed the detergent quantities recommended in the detergent manufacturer’s
instructions.
• Use stain removal products and bleaches before the wash cycle only when strictly necessary.
• Save water and electricity by only washing full loads (the exact amount depends upon the
program used).
Spare parts guarantee
We guarantee that the following spare parts will be available to professional repairers and
end-users for a minimum period of 10 years after placing the last unit of the model on the
market.
• Door, door hinges and seals, other seals, door locking assembly, and plastic peripherals
such as detergent dispensers.
• Listed parts can be purchased at below website.
- http://www.sa
msung.com/support
Specication sheet
“ * ” Asterisk(s) means variant model and can be varied (0-9) or (A-Z).
A
B
C
D
E
WD80T4046CW_04215V-00_EN.indd 61 2021/8/10 17:17:55
62 English
Specications
Specications
Type Front loading washing machine
Model name WD8*T4***** WD7*T4*****
Dimensions
A (Width)
600 mm 600 mm
B (Height)
850 mm 850 mm
C (Depth)
600 mm 550 mm
D680 mm 620 mm
E1120 mm 1070 mm
Water pressure 50 kPa ~ 1000 kPa
NET weight 68 kg 63 kg
Wash and spin capacity 8.0 kg 7.0 kg
Dry capacity 5.0 kg 4.0 kg
Power
consumption
Washing and
heating AC 220-240 V
/ 50 Hz
1900-2300 W
Drying 1600-1900 W
Spin revolutions 1400 RPM
NOTE
The design and specications are subject to change without notice for quality improvement
purposes.
EPREL information
To access the EPREL registration of the model :
1. Go to https://eprel.ec.europa.eu
2. Get the model identier from the energy label of the product and type it in the search box
3. Energy Labelling information of the model is shown
* You can directly access the product information via https://eprel.ec.europa.eu/
qr/#####(registration no.)
The registration no. can be found on the rating label on your product.
WD80T4046CW_04215V-00_EN.indd 62 2021/8/10 17:17:55
English 63
Specications
Standby power consumption
Power consumption Off mode 0.50 W
Indicative information (According to EU 2019/2023)
Model Cycles Capacity
(kg)
Program Time
(HH:MM)
Energy
Consumption
(kWh/Cycle)
Water
Consumption
(L/cycle)
Maximum
Temperature
(ºC)
Remaining
Moisture Content
(%)
Spinning
Speed
(RPM)
WD8*T4*****
Eco40-60
83:26 1.022 65.0 36 53.0 1400
42:38 0.547 42.0 31 53.0 1400
22:26 0.260 35.0 23 53.0 1400
Cotton 20ºC 8 3:19 0.339 104.0 20 53.0 1400
Cotton 60ºC 8 2:25 1.659 127.0 55 53.0 1400
Cotton 60ºC+
Bubble Soak 82:55 2.192 127.0 60 53.0 1400
Synthetics 40ºC 4 2:25 0.680 68.0 40 32.0 1200
15' Quick Wash Cold 20:15 0.015 43.0 15 105.0 800
Wash+Dry 56:47 4.165 93.0 28 -1400
2.5 4:41 1.900 61.0 22 -1400
WD7*T4*****
Eco40-60
73:28 1.130 63.0 44 53.0 1400
3.5 2:42 0.547 36.0 35 53.0 1400
22:42 0.207 29.0 21 53.0 1400
Cotton 20ºC 7 3:19 0.336 120.0 20 53.0 1400
Cotton 60ºC 7 2:25 1.587 117.0 55 53.0 1400
Cotton 60ºC+
Bubble Soak 72:55 2.011 117.0 60 53.0 1400
Synthetics 40ºC 4 2:25 0.680 68.0 40 32.0 1200
15' Quick Wash Cold 20:15 0.015 43.0 15 105.0 800
Wash+Dry 46:32 3.310 83.0 35 -1400
24:58 1.701 51.0 24 -1400
The values given for programmes other than the Eco 40-60 programme and the wash and
dry cycle are indicative only.
WD80T4046CW_04215V-00_EN.indd 63 2021/8/10 17:17:55
DC68-04215V-00
QUESTIONS OR COMMENTS?
COUNTRY CALL OR VISIT US ONLINE AT
UK 0333 000 0333 www.samsung.com/uk/support
IRELAND (EIRE) 0818 717100 www.samsung.com/ie/support
WD80T4046CW_04215V-00_EN.indd 64 2021/8/10 17:17:56
… 12 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Samsung WD80T4046 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Samsung WD80T4046 in de taal/talen: Engels als bijlage per email.

De handleiding is 11.96 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Samsung WD80T4046

Samsung WD80T4046 Gebruiksaanwijzing - Nederlands - 82 pagina's

Samsung WD80T4046 Gebruiksaanwijzing - Deutsch - 80 pagina's

Samsung WD80T4046 Snelstart handleiding - Deutsch, English - 14 pagina's

Samsung WD80T4046 Gebruiksaanwijzing - Français - 78 pagina's

Samsung WD80T4046 Snelstart handleiding - Français, Italiano, Português, Espanõl - 14 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info