This user manual includes detailed usage instructions for
your camera. Please read this manual thoroughly.
Basic troubleshootingQuick referenceContents
Basic functionsExtended functionsShooting options
Playback/EditingWireless networkSettings
AppendixesIndex
1
Warning—situations that could cause injury to yourself or others
Do not disassemble or attempt to repair your camera.
You can damage the camera and expose yourself to the risk of an electric shock.
Do not use your camera near ammable or explosive gases and liquids.
This may cause a fire or explosion.
Do not insert ammable materials into the camera or store these materials
near the camera.
This may cause a fire or electric shock.
Do not handle your camera with wet hands.
This may result in an electric shock.
Prevent damage to subjects’ eyesight.
Do not use the ash in close proximity (closer than 1 m/3 ft) to people or animals.
If you use the ash too close to your subject’s eyes, this can cause temporary or
permanent eyesight damage.
Keep your camera away from small children and pets.
Keep your camera and all accessories out of the reach of small children and animals.
Small parts may cause choking or serious injury if swallowed. Moving parts and
accessories may present physical dangers as well.
Do not expose the camera to direct sunlight or high temperatures for an
extended period of time.
Prolonged exposure to sunlight or extreme temperatures can cause permanent
damage to your camera’s internal components.
Health and safety information
Always comply with the following precautions and usage tips to avoid dangerous situations and ensure peak performance of your camera.
2
Health and safety information
Avoid covering the camera or charger with blankets or clothes.
The camera may overheat, which may distort the camera or cause a re.
Do not handle the power supply cord or the charger during a thunderstorm.
This may result in electric shock.
If liquid or foreign objects enter your camera, immediately disconnect all
power sources, such as the battery or charger, and then contact a Samsung
service center.
Comply with any regulations that restrict the use of a camera in a certain area.
•
Avoid interference with other electronic devices.
•
Turn o the camera when in an aircraft. Your camera can cause interference with
aircraft equipment. Follow all airline regulations and turn o your camera when
directed by airline personnel.
•
Turn o the camera near medical equipment. Your camera can interfere with
medical equipment in hospitals or health care facilities. Follow all regulations,
posted warnings, and directions from medical personnel.
Avoid interference with pacemakers.
Maintain a safe distance between this camera and all pacemakers to avoid potential
interference, as recommended by the manufacturer and research groups. If you
have any reason to suspect that your camera is interfering with a pacemaker
or other medical device, turn o the camera immediately and contact the
manufacturer of the pacemaker or medical device for guidance.
3
Health and safety information
Caution—situations that could cause damage to your camera or other
equipment
Remove the batteries from your camera when storing it for an extended period
of time.
Installed batteries may leak or corrode over time and cause serious damage to your
camera.
Use only authentic, manufacturer-recommended, Lithium-ion replacement
batteries. Do not damage or heat the battery.
Inauthentic, damaged, or heated batteries may cause a re or personal injury.
Use only Samsung-approved batteries, chargers, cables, and accessories.
•
Using unauthorized batteries, chargers, cables, or accessories can cause batteries
to explode, damage your camera, or cause injury.
•
Samsung is not responsible for damage or injuries caused by unapproved
batteries, chargers, cables, or accessories.
Use the battery only for its intended purpose.
Misusing the battery may cause a fire or electric shock.
Do not touch the ash while it res.
The ash is very hot when red and may burn your skin.
When you use the AC charger, turn o the camera before you disconnect the
power to the AC charger.
Failing to do so may result in re or electric shock.
Disconnect the charger from the wall socket when not in use.
Failing to do so may result in re or electric shock.
Do not use a damaged power supply cord, plug, or loose outlet when you
charge batteries.
This may cause a fire or electric shock.
Do not allow the AC charger to come in contact with the +/- terminals on the
battery.
This may cause a re or electric shock.
4
Health and safety information
Do not drop or subject the camera to strong impacts.
Doing so may damage the screen or external or internal components.
Exercise caution when you connect cables or adapters and install batteries and
memory cards.
If you force the connectors, improperly connect cables, or improperly install
batteries and memory cards, you can damage ports, connectors, and accessories.
Keep cards with magnetic strips away from the camera case.
Information stored on the card may be damaged or erased.
Never use a damaged charger, battery, or memory card.
This may result in electric shock or camera malfunction or cause a re.
Do not place the camera in or near magnetic elds.
Doing so may cause the camera to malfunction.
Do not use the camera if the screen is damaged.
If the glass or acrylic parts are broken, visit a Samsung Electronics Service Center to
have the camera repaired.
Check that the camera is operating properly before use.
The manufacturer takes no responsibility for any loss of les or damage that may
result from camera malfunction or improper use.
You must plug the small end of the USB cable into your camera.
If the cable is reversed, it may damage your files. The manufacturer is not
responsible for any loss of data.
Avoid interference with other electronic devices.
Your camera emits radio frequency (RF) signals that may interfere with unshielded
or improperly shielded electronic equipment, such as pacemakers, hearing aids,
medical devices, and other electronic devices in homes or vehicles. Consult the
manufacturers of your electronic devices to solve any interference problems you
experience. To prevent unwanted interference, use only Samsung-approved devices
or accessories.
Use your camera in the normal position.
Avoid contact with your camera’s internal antenna.
Data transference and your responsibilities
•
Data transferred via WLAN can be hacked, so avoid transferring sensitive data in
public areas or on open networks.
•
The camera manufacturer is not liable for any data transfers that infringe on
copyrights, trademarks, intellectual property laws, or public decency ordinances.
5
Outline of the User Manual
Basic functions 19
Learn about what is in the product box, the camera’s layout, what the
icons mean, and basic shooting functions.
Extended functions 43
Learn how to capture a photo and record a video by selecting a
mode.
Shooting options 66
Learn how to set the options in Shooting mode.
Playback/Editing 90
Learn how to play back photos or videos, and edit photos. Also, learn
how to connect your camera to your computer or TV.
Wireless network 114
Learn how to connect to wireless local area networks (WLANs) and
use functions.
Settings 137
Refer to options to congure your camera’s settings.
Appendixes 143
Get information about error messages, specications, and
maintenance.
Copyright information
•
Microsoft Windows and the Windows logo are registered trademarks of the
Microsoft Corporation.
•
Mac and Apple App Store are registered trademarks of the Apple Corporation.
•
Google Play Store is a registered trademark of Google, Inc.
•
microSD™, microSDHC™, and microSDXC™ are registered trademarks of the SD
Association.
•
Wi-Fi®, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are registered trademarks of
the Wi-Fi Alliance.
•
Trademarks and trade names used in this manual are the property of their
respective owners.
•
Camera specications or contents of this manual may be changed without
prior notice due to an upgrade of the camera's functions.
•
We recommend using your camera within the country where you purchased it.
•
Use this camera responsibly and adhere to all laws and regulations concerning
its use.
•
You are not allowed to reuse or distribute any part of this manual without prior
permission.
6
Indicators used in this manual
ModeIndicator
Smart Auto
T
Program
p
Aperture Priority, Shutter Priority, Manual
G
Smart Mode
s
Best Face
i
Magic Plus
g
Settings
n
Wireless Network
w
Shooting mode icons
These icons appear in the text when a function is available in a mode. See the
example below.
Note: The
s
Smart Mode or
g
Magic Plus mode may not support functions for
all scenes or modes.
For example:
Available in Program,
Aperture Priority, and
Shutter Priority modes
Icons used in this manual
IconFunction
Additional information
Safety warnings and precautions
[]
Camera buttons. For example, [Shutter] represents the shutter button.
()
Page number of related information
→
The order of options or menus you must select to perform a step; for
example: Select Face Detection→Normal (represents Select Face
Detection, and then select Normal).
*
Annotation
7
Pressing the shutter
•
Half-press [Shutter]: Press the shutter halfway down
•
Press [Shutter]: Press the shutter all the way down
Half-press [Shutter]Press [Shutter]
Subject, background, and composition
•
Subject: The main object in a scene, such as a person, animal, or still life
•
Background: The objects around the subject
•
Composition: The combination of a subject and background
Composition
Background
Subject
Exposure (Brightness)
T
he amount of light that enters your camera determines the exposure. You can alter
the exposure by changing the shutter speed, aperture value, or ISO sensitivity.
By altering the exposure, your photos will be darker or lighter.
S
Normal exposure
S
Overexposure (too bright)
Expressions used in this manual
8
Special features of your camera
Reading NFC tag information (Tag & Go)
Install the Samsung SMART CAMERA App on an NFC-enabled device, and then
place the device’s NFC antenna near the camera’s NFC tag. The Samsung SMART
CAMERA App launches automatically. If the app is not installed, a prompt to install
the app will appear.
Using the DIRECT LINK button
Press the DIRECT LINK button to activate the Wi-Fi function that you have
designated.
Setting a DIRECT LINK button option
You can select a Wi-Fi function to launch when you press the DIRECT LINK button.
1
Access Settings.
2
Access the DIRECT LINK button option.
3
Select a Wi-Fi feature from the list.
9
Special features of your camera
Using AutoShare
When you capture a photo with your camera, the photo is saved to a smart phone automatically. The camera connects to the smart phone wirelessly.
4
Select the camera from the list and
connect the smart phone to the
camera.
•
If a pop-up message appears on your
camera, allow the smart phone to
connect to your camera.
5
Capture a photo.
•
The captured photo is saved to the camera, and then transferred to the
smart phone.
1
Install Samsung SMART CAMERA
App on the smart phone.
2
Turn on the AutoShare feature on
the camera.
3
Launch Samsung SMART CAMERA
App on the smart phone.
10
Special features of your camera
Using MobileLink
You can send les easily from your camera to a smart phone. The camera connects wirelessly to smart phones that support the MobileLink feature.
4
Select the camera from the list and
connect the smart phone to the
camera.
•
If a pop-up message appears on your
camera, allow the smart phone to
connect to your camera.
5
On the smart phone or camera,
select les to transfer from the
camera.
6
On the smart phone, touch the copy
button or on the camera, select
Send.
1
Install Samsung SMART CAMERA
App on the smart phone.
2
Access the MobileLink mode on the
camera.
•
If a pop-up message appears, select an
option.
3
Launch Samsung SMART CAMERA
App on the smart phone.
11
Special features of your camera
Using Remote Viewnder
You can remotely control your camera from a smart phone. The camera connects to the smart phone wirelessly. Use the smart phone as a remote shutter release with the
Remote Viewnder feature. The captured photo will appear on the smart phone.
4
Select the camera from the list and
connect the smart phone to the
camera.
•
If a pop-up message appears on your
camera, allow the smart phone to
connect to your camera.
5
Touch and hold to focus, and
then release it to capture a photo.
6
Touch the thumbnail to view the
photo.
1
Install Samsung SMART CAMERA
App on the smart phone.
2
Access the Remote Viewnder
mode on the camera.
3
Launch Samsung SMART CAMERA
App on the smart phone.
12
Shooting samples – Macro
You can capture close up shots of small subjects, such as owers or insects.
The example image may dier from the actual photo that you capture.
1
Select the macro option ().
2
Capture a photo.
Special features of your camera
13
Basic troubleshooting
Learn to solve common problems by setting shooting options.
The subject’s eyes
appear red.
Red eye occurs when the subject's eyes reect light from the camera ash.
•
Set the ash option to Red-eye or Red-eye Fix. (p. 69)
•
If the photo has already been captured, select Red-eye Fix in the edit menu. (p. 102)
Photos have dust spots.If dust particles are present in the air, you may capture them in photos when you use the ash.
•
Turn o the ash or avoid capturing photos in a dusty place.
•
Set ISO sensitivity options. (p. 72)
Photos are blurred.Blurring can occur if you capture photos in low light conditions or hold the camera incorrectly.
Use the OIS function or half-press [Shutter] to ensure the subject is in focus. (p. 41)
Photos are blurred when
shooting at night.
As the camera tries to let in more light, the shutter speed slows. This can make it dicult to hold the camera steady long
enough to capture a clear photo and may result in camera shake.
•
Select Low Light Shot in
s
Smart Mode. (p. 51)
•
Turn on the ash. (p. 70)
•
Set ISO sensitivity options. (p. 72)
•
Use a tripod to prevent your camera from shaking.
Subjects come out
too dark because of
backlighting.
When the light source is behind the subject or when there is a high contrast between light and dark areas, the subject may
appear t
oo dark.
•
Avoid shooting toward the sun.
•
Set the ash option to Fill in. (p. 70)
•
Adjust the exposure. (p. 80)
•
Set the Auto Contrast Balance (ACB) option. (p. 81)
•
Set the metering option to Spot if a subject is in the center of the frame. (p. 81)
14
Quick reference
Capturing photos of people
• s
Smart mode > Beauty Face
f
51
• i
Best Face mode
f
54
•
Red-eye/Red-eye Fix
(to prevent or correct red-eye)
f
69
•
Face Detection/Self-Portrait
f
78
•
Smile Shot
f
79
Capturing photos at night or in the dark
• s
Smart mode > Sunset, Silhouette, Fireworks,
Light Trace, Low Light Shot
f
51
•
Flash options
f
70
•
ISO sensitivity (to adjust the sensitivity to light)
f
72
Capturing action photos
•
Shutter Priority mode
f
49
• s
Smart mode > Action Freeze, Continuous Shot
f
51
•
Continuous
f
85
Capturing photos of text, insects, or
owers
• s
Smart mode > Macro
f
51
•
Macro
f
73
Adjusting the exposure (brightness)
• s
Smart mode > Rich Tone
f
51
•
ISO sensitivity (to adjust the sensitivity to light)
f
72
•
EV (to adjust exposure)
f
80
•
ACB (to compensate for subjects against bright
backgrounds)
f
81
•
Metering
f
81
•
AE Bracket (to capture 3 photos of the same scene with
dierent exposures)
f
86
Capturing photos of scenery
• s
Smart mode > Landscape, Waterfall
f
51
• s
Smart mode > Panorama
f
52
Applying eects to photos
• g
Magic Plus mode > My Magic Frame
f
55
• g
Magic Plus mode > Motion Photo
f
57
• g
Magic Plus mode > Photo Filter
f
58
• g
Magic Plus mode > Eect Artist
f
60
• g
Magic Plus mode > Color Brush
f
62
•
Image Adjust (to adjust Sharpness, Contrast, or
Saturation)
f
87
Applying eects to videos
• g
Magic Plus mode > Movie Filter
f
59
Reducing camera shake
•
Optical Image Stabilization (OIS)
f
40
Transferring and sharing les
•
Sending photos or videos to a smart phone
f
121
•
Sending photos or videos via email
f
131
•
Using photo or video sharing services
f
132
•
Uploading photos to an online storage or registered
Index ........................................................................................................................... 166
Unpacking
……………………………………… 20
Camera layout
…………………………………… 21
Using the DIRECT LINK button
………………… 23
Inserting the battery and memory card
……… 24
Charging the battery and turning on
your camera
……………………………………… 25
Charging the battery
…………………………… 25
Turning on your camera
……………………… 25
Performing the initial setup
…………………… 26
Learning icons
…………………………………… 28
Selecting modes
………………………………… 29
Icons on the Mode screen
……………………… 29
Selecting options or menus
…………………… 31
Selecting with buttons
………………………… 31
Selecting by touch
……………………………… 32
Using Smart Panel
……………………………… 34
Setting the display and sound
………………… 35
Setting the display type
………………………… 35
Setting the sound
……………………………… 36
Capturing photos
……………………………… 37
Zooming
……………………………………… 38
Reducing camera shake (OIS)
………………… 40
Tips for getting a clearer photo
………………… 41
Basic functions
Learn about what is in the product box, the camera’s layout, what the icons mean, and basic shooting functions.
Basic functions
20
Unpacking
The following items are included in your product box.
CameraAC adapter/USB cable
Rechargeable batteryStrap
Quick Start Guide
Optional accessories
Camera caseA/V cable
G
Battery chargerMemory card/Memory card adapter
•
The illustrations may dier slightly from the items shipped with your product.
•
The items included in the box may dier depending on the model.
•
You can purchase optional accessories at a retailer or a Samsung service center.
Samsung is not responsible for any problems caused by using unauthorized
accessories.
Basic functions
21
Camera layout
Before you start, familiarize yourself with your camera’s parts and their functions.
Tripod mount
Power button
Internal antenna*
* Avoid contact with the internal
antenna while using a wireless
network.
Lens
Shutter button
AF-assist light/Timer lamp
Flash*
* While not in use, keep the ash unit closed to prevent damage.
Forcing the ash unit open may cause damage to your camera.
USB and A/V port
Accept USB cable and A/V cable.
Microphone
Battery chamber cover
Insert a memory card and battery.
Mode dial
(p. 29)
Attaching the strap
x
y
Speaker
Camera layout
Basic functions
22
NFC
Buttons
(p. 23)
Status lamp
•
Blinking: When the camera is saving a photo or video,
being read by a computer, when the image is out of focus,
there is a problem charging the battery, or when the
camera is connecting to WLAN or sending a photo.
•
Steady: When the camera is connected to a computer,
charging the battery, or when the image is in focus.
Display
Zoom button
•
In Shooting mode: Zoom in or out.
•
In Playback mode: Zoom in on part of a photo or view
les as thumbnails, or adjust the volume.
DIRECT LINK button
Start a preset Wi-Fi function.
NFC tag
Launch an NFC feature by reading a tag
from an NFC-enabled device. (p. 119)
Flash pop-up button
NF
C
Camera layout
Basic functions
23
Buttons
ButtonDescription
Start recording a video.
Access options or menus.
Go back.
Basic functionsOther functions
D
Change the display option.Move up
c
Change the macro option.Move down
F
Change the ash option.Move left
t
Change the timer and burst options.Move right
Conrm the highlighted option or menu.
Enter Playback mode.
•
Open Smart Panel in Shooting mode.
•
Delete les in Playback mode.
Using the DIRECT LINK button
You can turn on the Wi-Fi feature conveniently with [DIRECT LINK].
Press [DIRECT LINK] to activate the Wi-Fi function that you have designated.
Press [DIRECT LINK] again to return to the previous mode.
Setting a DIRECT LINK button option
You can select a Wi-Fi function to launch when you press [DIRECT LINK].
1
Rotate the mode dial to
n
.
2
Select General→DIRECT LINK (Wi-Fi Button).
3
Select a Wi-Fi feature. (p. 142)
Basic functions
24
Inserting the battery and memory card
Learn how to insert the battery and an optional memory card into the camera.
Removing the battery and memory card
Rechargeable battery
Battery lock
Slide the lock down to release
the battery.
Memory card
Push the card gently until it disengages
from the camera, and then pull it out of
the slot.
You can use the internal memory for temporary storage if a memory card is not
inserted.
Insert a memory card with the gold-
colored contacts facing up.
Insert the battery with the Samsung
logo facing up.
Basic functions
25
Charging the battery and turning on your camera
Turning on your camera
Press [
X
] to turn your camera on or o.
•
The initial setup screen appears when you turn on
the camera for the rst time. (p. 26)
Turning on your camera in Playback mode
Press [
P
]. The camera turns on and immediately
accesses Playback mode.
Charging the battery
Before using the camera for the rst time, you must fully charge the battery. Plug
the small end of the USB cable into your camera, and then plug the other end of the
USB cable into the AC adapter.
Status lamp
•
Red light on: Charging
•
Red light o: Fully charged
•
Red light blinking: Error
Use only the AC adapter and USB cable supplied with your camera. If you use
another AC adapter (such as SAC-48), the camera battery may not charge or work
properly.
Basic functions
26
Performing the initial setup
When you turn on your camera for the rst time, the initial setup screen appears. Follow the steps below to congure the camera’s basic settings. The language is preset for the
country or region where the camera is sold. You can change the language as desired. You can also select an item by touching it on the screen.
5
Press [
c
] to select Date/Time Set, and then press [
t
] or [
o
].
CancelSet
Date/Time Set
YearMonthDayHour
Min
DST
•
The screen may dier depending on the language you selected.
6
Press [
F
/
t
] to select an item.
7
Press [
D
/
c
] to set the date, time, and daylight-saving time, and
then press [
o
].
1
Press [
c
] to select Time Zone, and then press [
t
] or [
o
].
2
Press [
D
/
c
] to select Home, and then press [
o
].
•
When you travel to another country, select Visit, and then select a new time
zone.
3
Press [
D
/
c
] to select a time zone, and then press [
o
].
Time Zone
BackSet
[GMT +00:00] London
[GMT +01:00] Berlin, Paris, Rome
[GMT +02:00] Athens, Helsinki
[GMT +03:00] Moscow
4
Press [
b
].
Performing the initial setup
Basic functions
27
8
Press [
c
] to select Date Type, and then press [
t
] or [
o
].
9
Press [
D
/
c
] to select a date type, and then press [
o
].
10
Press [
c
] to select Time Type, and then press [
t
] or [
o
].
11
Press [
D
/
c
] to select a time type, and then press [
o
].
12
Press [
b
] to nish the initial setup.
Basic functions
28
Learning icons
The icons the camera displays on the screen change according to the mode you select or the options you set. If you change a shooting option, the corresponding icon will blink
briey in yellow.
1
2
3
IconDescription
Sound Alive on
Intelli zoom on
Optical Image Stabilization (OIS)
Metering
Burst option
Timer
White balance
White Balance micro adjustment
Image adjustment (sharpness, contrast,
and saturation)
Focus area
Focus option
Face detection
3
Shooting option (touch)
IconDescription
AutoShare On
Touch AF option
Shooting options
Open Smart Panel
IconDescription
Memory card inserted
•
: Fully charged
•
: Partially charged
•
: Empty (Recharge)
•
: Charging (Connected with
the charger)
Auto focus frame
Camera shake
Zoom indicator
Photo resolution when the
Intelli zoom is on
Zoom ratio
Histogram (p. 35)
2
Shooting option
IconDescription
ISO sensitivity
Flash
Flash intensity adjustment
Photo resolution
Video resolution
Frame rate (per second)
1
Shooting information
IconDescription
Shooting mode
Aperture value
Shutter speed
Current recording time/
Available recording time
Exposure value
Current date
Current time
Continuous auto focus activated
Available number of photos
Basic functions
29
Selecting modes
Use the mode dial to select a shooting mode or function. Rotate the mode dial to a desired mode. You can also select an icon on the Mode screen in some modes.
Icons on the Mode screen
IconDescription
T
Smart Auto: Capture a photo with a Scene mode selected
automatically by the camera. (p. 44)
p
Program: Capture a photo with settings you have adjusted manually.
(p. 46)
G
Aperture Priority: Set the aperture value manually. The
camera automatically selects an appropriate shutter speed.
(p. 48)
Shutter Priority: Set the shutter speed manually. The camera
automatically selects an appropriate aperture value. (p. 49)
Manual: Adjust both the aperture value and the shutter
speed manually. (p. 50)
s
Smart Mode: Capture a photo with options that are preset for a specic
scene. (p. 51)
i
Best Face: Capture multiple photos and replace faces to create the best
possible image. (p. 54)
My Magic
Frame
Movie
Filter
Motion
Photo
Eect
Artist
Color
Brush
Photo
Filter
2
1
My
Ma
Fra
m
M
o
vie
F
il
ter
Motion
Photo
Ee
ct
Art
ist
Co
l
or
B
r
u
s
h
P
h
oto
Fi
l
ter
My
My
Photo
Editor
Ÿ
For example: When you select My Magic Frame in Magic Plus mode.
No.Description
1
Current Mode screen
•
Rotate the mode dial to go to another mode screen.
2
Mode icons
•
Press [
D
/
c
/
F
/
t
] to scroll to a desired mode, and then press [
o
]
to access the mode.
•
Touch an icon to access a mode or function.
Selecting modes
Basic functions
30
IconDescription
w
MobileLink: Send photos or videos to a smart phone. (p. 121)
Remote Viewnder: Use a smart phone as a remote shutter
release and see a preview of an image from your camera on
your smart phone . (p. 123)
Baby Monitor: Connect the camera to a smart phone and
monitor a location. (p. 125)
Auto Backup: Send photos or videos that you captured with
the camera to a PC wirelessly. (p. 127)
Email: Send photos or videos stored on the camera via email.
(p. 129)
SNS & Cloud: Upload photos or videos to le sharing services.
(p. 132)
Samsung Link: Upload les to the Samsung Link online
storage or to registered devices, or view les on other
Samsung Link supported devices. (p. 134)
IconDescription
g
My Magic Frame: Capture a photo and select an area to
make it transparent. Overlay a newly captured photo onto the
area. (p. 55)
Motion Photo: Capture and combine a series of photos, and
then select an area to be animated to create a GIF animation.
(p. 57)
Photo Filter: Capture a photo with various lter eects.
(p. 58)
Movie Filter: Record a video with various lter eects. (p. 59)
Eect Artist: Capture a photo with various lters or texture
eects, and then add brush or pen eects to it. (p. 60)
Color Brush: Capture a photo with lter eects, and then
make an area clearer or more colorful by drawing a line on it.
(p. 62)
Photo Editor: Edit photos with various eects. (p. 99)
n
Settings: Adjust settings to match your preferences. (p. 137)
Basic functions
31
Selecting options or menus
Press [
m
] or [/
f
] to select an option or a menu. You can also touch the screen to select an option or a menu.
For example, to select a White Balance option in Program mode:
1
Rotate the mode dial to
p
.
2
Press [
m
].
ExitSelect
EV
White Balance
ISO
Flash
Focus
Selecting with buttons
Press [
m
], and then press [
D
/
c
/
F
/
t
] or [
o
] to select an option or a
menu.
1
In Shooting or Playback mode, press [
m
].
2
Scroll to an option or a menu.
•
To move up or down, press [
D
] or [
c
].
•
To move left or right, press [
F
] or [
t
].
3
Press [
o
] to conrm the highlighted option or menu.
Press [
b
] to go back to the previous menu. Half-press [Shutter] to return to
Shooting mode.
Selecting options or menus
Basic functions
32
3
Press [
D
/
c
] to select White Balance, and then press [
t
] or
[
o
].
EV
White Balance
ISO
Flash
Focus
ExitSelect
4
Press [
F
/
t
] to select an option.
Back
Adjust
White Balance : Daylight
5
Press [
o
] to save your settings.
Selecting by touch
Touch on the screen, drag the option list up or down, and then touch an
option to select it.
1
In Shooting or Playback mode, touch on the screen.
2
Drag the option list up or down, and then touch an option.
ACB
Metering
Drive/Timer
AE Bracket Settings
Image Adjust
ExitSelect
Selecting options or menus
Basic functions
33
•
When you touch or drag the screen, discolorations may occur. This is not a
malfunction, but a characteristic of the touch screen. Touch or drag lightly to
minimize the discolorations.
•
The touch screen may not work properly if you use the camera in extremely
humid environments.
•
The touch screen may not work properly if you apply screen protection lm or
other accessories to the screen.
•
Depending on the viewing angle, the screen may appear dim. Adjust the
brightness or viewing angle to improve the resolution.
Learning touch gestures
Do not use sharp objects, such as pens or pencils, to touch the screen. You can
damage the screen.
Touching: Touch an icon to select
a menu or option.
Dragging: Touch and hold an area on
the screen, and then drag your nger.
Flicking: Gently ick your nger
across the screen.
Selecting options or menus
Basic functions
34
Using Smart Panel
Press [/
f
] or touch on the screen to select an option or a menu. Some
options are not available depending on the menu you select.
For example, to select a White Balance option in Program mode:
1
Rotate the mode dial to
p
.
2
Press [/
f
] or touch on the screen.
3
Press [
D
/
c
/
F
/
t
] to scroll to .
0.70.70.30.3
White Balance : Auto WB
ExitAdjust
4
Press [
o
].
•
For some items, you can select an option directly by rotating [Zoom] to the
left or right without having to press [
o
].
5
Press [
F
/
t
] to select a White Balance option.
White Balance : Daylight
BackAdjust
6
Press [
o
] to save your settings.
Basic functions
35
Setting the display type
You can select a display type for the Shooting or Playback mode. Each type displays
dierent shooting or playback information. See the table below.
Press [
D
] repeatedly to change the display type.
Mode
Display type
Shooting
•
Hide all information about shooting options.
•
Show all information about shooting options.
•
Show all information about shooting options and a histogram.
Playback
•
Show information except shooting information and histogram.
•
Show all information about the current le.
About histograms
A histogram is a graph that illustrates how light is distributed in your photo. If the
histogram has a high peak on the left, the photo is underexposed and will appear
dark. A peak on the right of the graph means that the photo is overexposed and
will appear washed out. The height of the peaks is related to color information. The
more of a particular color, the taller the peak.
S
Under-exposed
S
Well-exposed
S
Over-exposed
Setting the display and sound
Learn how to change the basic display information and sound settings.
Setting the display and sound
Basic functions
36
Setting the option display view
You can hide or show the option display appearing in some modes.
Press [
o
] repeatedly.
•
Hide the option display.
•
Show the option display.
Option display
OK: Panel O
▲ For example, in Photo Filter mode
Setting the sound
Turn the sound your camera emits when you perform functions on or o.
1
Rotate the mode dial to
n
.
2
Select Sound→Beep Sound.
3
Select an option.
Option
Description
O
The camera does not emit any sounds.
On
The camera emits sounds.
Basic functions
37
1
Rotate the mode dial to
T
.
2
Align your subject in the frame.
3
Half-press [Shutter] to focus.
•
A green frame means the subject is in focus.
•
A red frame means the subject is out of focus.
4
Press [Shutter] to capture a photo.
5
Press [
P
] to view the captured photo.
•
To delete the photo, press [/
f
], and then select Yes .
6
Press [
P
] to return to Shooting mode.
See page 41 for tips to get clearer photos.
Capturing photos
Learn how to capture photos easily and quickly in Smart Auto mode.
Capturing photos
Basic functions
38
Zooming
You can capture close-up photos by adjusting the zoom.
Zoom outZoom in
Zoom ratio
When you rotate the zoom button, the zoom ratio shown on the screen may
change inconsistently.
Digital zoom
Digital zoom is supported by default in Shooting mode. If you zoom in on a subject
in Shooting mode and the zoom indicator is in the digital range, your camera is
using Digital zoom. By using both the 21X Optical zoom and 5X Digital zoom, you
can zoom in up to 105 times.
Zoom indicator
Optical range
Digital range
If you capture a photo with Digital zoom, the photo quality may be lower than
normal.
pAhM
Capturing photos
Basic functions
39
Intelli zoom
If the zoom indicator is in the Intelli range, your camera is using Intelli zoom. Photo
resolution varies according to the zoom rate if you use Intelli zoom. By using both
Optical zoom and Intelli zoom, you can zoom in up to 42 times.
Zoom indicator
Optical range
Intelli range
Photo resolution
when the Intelli
zoom is on
•
Intelli zoom helps you capture a photo with less quality deterioration than
Digital zoom. However, the photo quality may be lower than when you use
Optical zoom.
•
Intelli zoom is available only when you set a 4:3 resolution ratio. If you set
another resolution ratio with Intelli zoom on, Intelli zoom will be turned o
automatically.
•
Intelli zoom is always on in Smart Auto mode.
TpAhM
Setting Intelli zoom
1
In Shooting mode, press [
m
].
2
Select Intelli Zoom.
3
Select an option.
Icon
Description
O: The Intelli zoom is deactivated.
On: The Intelli zoom is activated.
Capturing photos
Basic functions
40
Reducing camera shake (OIS)
Reduce camera shake optically in Shooting mode.
S
Before correction
S
After correction
1
In Shooting mode, press [
m
].
2
Select OIS.
3
Select an option.
Icon
Description
O: OIS is deactivated.
On: OIS is activated.
pAhM
•
OIS may not function properly when:
-
you move your camera to follow a moving subject
-
you use Digital zoom
-
there is too much camera shake
-
the shutter speed is slow (for example, when you capture night scenes)
-
the battery is low
-
you capture a close-up shot
•
If you use the OIS function with a tripod, your images may be blurred by the
vibration of the OIS sensor. Deactivate the OIS function when you use a tripod.
•
If the camera is hit or dropped, the display will be blurry. If this occurs, turn o
the camera, and then turn it on again.
Basic functions
41
Holding your camera correctly
Ensure nothing is blocking the lens,
ash, or microphone.
Half-pressing the shutter button
Half-press [Shutter] and adjust the focus. The camera
adjusts the focus and exposure automatically.
The camera sets the aperture value and shutter
speed automatically.
Focus frame
•
Press [Shutter] to capture the photo if the
focus frame appears in green.
•
Change the composition and half-press
[Shutter] again if the focus frame appears in
red.
Reducing camera shake
Set the Optical Image Stabilization option to reduce camera
shake optically. (p. 40)
When is displayed
Camera shake
When you shoot in the dark, avoid setting the ash option to Slow Sync or O.
The aperture remains open longer and it may be harder to hold the camera steady
long enough to capture a clear photo.
•
Use a tripod or set the ash option to Fill in. (p. 70)
•
Set ISO sensitivity options. (p. 72)
Tips for getting a clearer photo
Basic functions
42
Preventing your subject from being out of focus
It may be dicult to get your subject in focus when:
-
there is little contrast between the subject and background (for example,
when your subject is wearing clothing that is similar in color to the
background)
-
the light source behind the subject is too bright
-
the subject is shiny or reective
-
the subject includes horizontal patterns, such as blinds
-
the subject is not positioned in the center of the frame
•
When you capture photos in low light
Turn on the ash.
(p. 70)
•
When subjects are moving rapidly
Use the Continuous
shooting function.
(p. 51, 85)
Using the focus lock
Half-press [Shutter] to focus. When the subject is in focus, you can
reposition the frame to change the composition. When you are ready,
press [Shutter] to capture your photo.
Using the Smart Auto mode
…………………… 44
Using the Program mode
……………………… 46
Using the Aperture Priority, Shutter Priority, or
Manual mode
…………………………………… 47
Using the Aperture Priority mode
……………… 48
Using the Shutter Priority mode
……………… 49
Using the Manual mode
……………………… 50
Using the Smart mode
………………………… 51
Using the Panorama mode
…………………… 52
Using the Best Face mode
……………………… 54
Using the Magic Plus mode
…………………… 55
Using the My Magic Frame mode
……………… 55
Using the Motion Photo mode
………………… 57
Using the Photo Filter mode
…………………… 58
Using the Movie Filter mode
…………………… 59
Using the Eect Artist mode
…………………… 60
Using the Color Brush mode
…………………… 62
Editing a photo
………………………………… 63
Recording a video
……………………………… 64
Recording a video with the Smart Scene
Detection function
…………………………… 65
Extended functions
Learn how to capture a photo and record a video by selecting a mode.
Extended functions
44
1
Rotate the mode dial to
T
.
2
Align your subject in the frame.
•
The camera automatically selects a scene. An appropriate scene icon appears
at the top left of the screen. The icons are listed below.
IconDescription
Landscapes
Scenes with bright white backgrounds
Landscapes at night
Portraits at night
Landscapes with backlighting
IconDescription
Portraits with backlighting
Portraits
Close-up photos of objects
Close-up photos of text
Sunsets
Indoors, dark
Partially lit
Close-up with spot lighting
Portraits with spot lighting
Blue skies
Forested areas
Close-up photos of colorful subjects
Fireworks (when using a tripod)
Camera is stabilized or on a tripod (when shooting in the dark)*
Actively moving subjects*
* This icon appears next to the scene icon.
Using the Smart Auto mode
In Smart Auto mode, your camera automatically chooses the appropriate camera settings based on the type of scene it detects. The Smart Auto mode is helpful if you are not
familiar with the camera settings for various scenes.
Using the Smart Auto mode
Extended functions
45
3
Half-press [Shutter] to focus.
4
Press [Shutter] to capture the photo.
•
If the camera does not recognize an appropriate scene mode, it uses the default
settings for the Smart Auto mode.
•
Even if it detects a face, the camera may not select a portrait mode depending
on the subject's position or lighting.
•
The camera may not select the correct scene depending on the shooting
conditions, such as camera shake, lighting, or distance to the subject.
•
Even if you use a tripod, the camera may not detect the mode if the subject
is moving.
•
The camera consumes more battery power, because it changes settings often to
select appropriate scenes.
Extended functions
46
Using the Program mode
In Program mode, you can set most options, except the shutter speed and aperture value, which the camera sets automatically.
1
Rotate the mode dial to
p
.
2
Set the desired options.
•
For a list of options, refer to "Shooting options". (p. 66)
3
Align your subject in the frame, and then half-press [Shutter] to
focus.
4
Press [Shutter] to capture the photo.
Extended functions
47
Aperture value
The aperture is a hole that lets light into the camera. The aperture housing contains
thin, metal plates that open and close, widening or narrowing the aperture, and
controlling the amount of light that enters the camera. The size of the aperture is
closely related to the brightness of a photo: the larger the aperture, the brighter
the photo; the smaller the aperture, the darker the photo. Note that the larger the
aperture value, the smaller the aperture size. For example, an aperture set to 5.6 is
larger than an aperture set to 11.
S
Small aperture value (The size of the
aperture is large.)
S
Large aperture value (The size of the
aperture is small.)
Shutter speed
Shutter speed, which is an important factor in the brightness of a photo, refers to
the amount of time it takes to open and close the shutter. A slow shutter speed
allows more time to let light in. All things being equal, photos are brighter, but fast
moving objects tend to blur. On the other hand, a fast shutter speed allows less time
to let light in. Photos are darker, but objects in motion are captured more clearly.
S
Slow shutter speed
S
Fast shutter speed
Using the Aperture Priority, Shutter Priority, or Manual mode
Adjust the aperture value or shutter speed to control the exposure of your photos. You can use these options in the Aperture Priority, Shutter Priority, and Manual modes.
Using the Aperture Priority, Shutter Priority, or Manual mode
Extended functions
48
Using the Aperture Priority mode
The Aperture Priority mode allows you to set the aperture value manually while the
camera automatically selects an appropriate shutter speed.
1
Rotate the mode dial to
G
.
2
Select .
•
To select another mode when the mode dial is set to
G
, press [
b
] or
touch
, and then select a mode.
3
Press [
o
] → [
F
/
t
] to adjust the aperture value.
•
You can also touch the aperture value on the screen to view the dial.
•
You can also drag the dial on the screen to the left or right.
•
See page 47 for more information about the aperture value.
OK: Change aperture
4
Press [
o
] to save the setting.
5
Set options.
•
For a list of options, refer to "Shooting options". (p. 66)
6
Align your subject in the frame, and then half-press [Shutter] to
focus.
7
Press [Shutter] to capture the photo.
When you set the ISO option to Auto, the shutter speed may not change
automatically to match the aperture value. In this case, the camera nds an
appropriate exposure value by changing the ISO option automatically when you
capture a photo. To set the ISO option manually, press [
m
], and then select ISO
→ an option.
Using the Aperture Priority, Shutter Priority, or Manual mode
Extended functions
49
Using the Shutter Priority mode
The Shutter Priority mode allows you to set the shutter speed manually while the
camera automatically selects an appropriate aperture value.
1
Rotate the mode dial to
G
.
2
Select .
•
To select another mode when the mode dial is set to
G
, press [
b
] or
touch
, and then select a mode.
3
Press [
o
] → [
F
/
t
] to adjust the shutter speed.
•
You can also touch the shutter speed on the screen to view the dial.
•
You can also drag the dial on the screen to the left or right.
•
See page 47 for more information about the shutter speed.
OK: Change shutter speed
4
Press [
o
] to save the setting.
5
Set options.
•
For a list of options, refer to "Shooting options". (p. 66)
6
Align your subject in the frame, and then half-press [Shutter] to
focus.
7
Press [Shutter] to capture the photo.
When you set the ISO option to Auto, the aperture value may not change
automatically to match the shutter speed. In this case, the camera nds an
appropriate exposure value by changing the ISO option automatically when you
capture a photo. To set the ISO option manually, press [
m
], and then select ISO
→ an option.
Using the Aperture Priority, Shutter Priority, or Manual mode
Extended functions
50
Using the Manual mode
The Manual mode allows you to adjust both the aperture value and the shutter
speed manually.
1
Rotate the mode dial to
G
.
2
Select .
•
To select another mode when the mode dial is set to
G
, press [
b
] or
touch
, and then select a mode.
3
Press [
o
] → [
D
/
c
] to select the aperture value or shutter
speed.
•
You can also touch the aperture value or shutter speed on the screen to view
the dial.
OK: Change aperture/
shutter speed
4
Press [
F
/
t
] to adjust the aperture value or shutter speed.
•
You can also drag the dials on the screen to the left or right.
5
Press [
o
] to save the setting.
6
Set options.
•
For a list of options, refer to "Shooting options". (p. 66)
7
Align your subject in the frame, and then half-press [Shutter] to
focus.
8
Press [Shutter] to capture the photo.
Extended functions
51
Using the Smart mode
In Smart mode, you can capture a photo with options that are preset for a specic scene.
OptionDescription
Rich Tone
Capture multiple photos of the same subject with dierent
exposure values, and then synthesize them to create a vibrant
photo.
Panorama
Capture a wide panoramic scene in a single photo.
Waterfall
Capture scenes with waterfalls.
Silhouette
Capture subjects as dark shapes against a light background.
Sunset
Capture scenes at sunset, with natural-looking reds and
yellows.
Low Light
Shot
Capture multiple photos in low light conditions without a
ash. The camera combines them to create a single image
that is brighter and has less blurring.
Fireworks
Capture scenes with reworks.
Light Trace
Capture scenes with the light trailing in low-light conditions.
3
Align your subject in the frame, and then half-press [Shutter] to
focus.
4
Press [Shutter] to capture the photo.
1
Rotate the mode dial to
s
.
2
Select a scene.
•
To select another mode when the mode dial is set to
s
, press [
b
] or touch
, and then select a mode. You can also select another mode by pressing
[
m
] and selecting a mode.
Smart Mode : Beauty Face
Set
OptionDescription
Beauty Face
Capture a portrait with options to hide facial imperfections.
Continuous
Shot
Capture photos continuously.
Landscape
Capture still-life scenes and landscapes.
Macro
Capture small or close-up subjects.
Action Freeze
Capture subjects moving at high speed.
Using the Smart mode
Extended functions
52
5
With [Shutter] pressed, slowly move the camera in the direction that
will let it capture the rest of the panorama.
•
Arrows pointing in the direction of motion are displayed, and the entire
shooting image is displayed in the preview box.
•
When the scenes are aligned, the camera captures the next photo
automatically.
Stability: A atter line represents
less camera shake.
6
When you are nished, release [Shutter].
•
When you have captured all the necessary shots, the camera combines them
into one panoramic photo.
Using the Panorama mode
In Panorama mode, you can capture a wide panoramic scene in a single photo.
Panorama mode captures and combines a series of photos to create a panoramic
image.
S
Shooting example
1
Rotate the mode dial to
s
.
2
Select Panorama.
3
Align your subject in the frame, and then half-press [Shutter] to
focus.
•
Align the camera with the far left or the far right, or very top or bottom, of the
scene you want to capture.
4
Press and hold [Shutter] to start shooting.
Using the Smart mode
Extended functions
53
•
For best results when capturing panoramic photos, avoid the following:
-
moving the camera too quickly or too slowly
-
moving the camera too little to capture the next image
-
moving the camera at irregular speeds
-
shaking the camera
-
shooting in dark places
-
capturing moving subjects nearby
-
shooting conditions where the brightness or color of light is changing
•
Photos taken are automatically saved, and shooting is stopped under the
following conditions:
-
if you change the shooting direction while shooting
-
if you move the camera too rapidly
-
if you don't move the camera
•
Selecting Panorama mode will disable the digital and optical zoom functions.
If you select Panorama mode while the lens is zoomed in, the camera
automatically zooms out to the default position.
•
Some shooting options are not available.
•
The camera may stop shooting due to the shooting composition or movement
within the scene.
•
Your camera may not capture the last scene in its entirety if you stop moving the
camera exactly where you want the scene to end. To capture the entire scene,
move your camera slightly beyond the point where you want the scene to end.
Extended functions
54
Using the Best Face mode
In Best Face mode, you can capture multiple photos and replace faces to create the best possible image. Use this mode to select the best image for each individual when
capturing group photos.
5
Touch the best image from the 5 faces that were captured.
•
Repeat steps 4 and 5 to replace the rest of the faces in the photo.
•
The icon will appear on the image that the camera recommends.
6
Touch to save the photo.
•
Use a tripod to prevent your camera from shaking.
•
The resolution is set to or less.
1
Rotate the mode dial to
i
.
2
Align your subject in the frame, and then half-press [Shutter] to
focus.
3
Press [Shutter] to capture the photo.
•
The camera captures 5 photos consecutively.
•
The rst photo is set as the background image.
•
The camera automatically detects faces after shooting.
4
Touch a face to replace.
Extended functions
55
Using the My Magic Frame mode
In My Magic Frame mode, you can make part of the photo transparent, and then
capture a new photo within the transparent area.
1
Rotate the mode dial to
g
.
2
Select .
•
To select another mode when the mode dial is set to
g
, press [
b
] or touch
, and then select a mode. You can also select another mode by pressing
[
m
] and selecting a mode.
3
Half-press [Shutter] to focus, and then press [Shutter] to capture a
background photo.
•
To select a background photo from your saved photos, press [
m
] and
then select Open Image→ an image. You cannot select a video le, GIF le,
or a photo captured in Panorama mode.
4
Touch Use.
•
To recapture a background photo, touch Retake.
RetakeUse
5
Select a frame.
•
To draw a new frame and set the thickness of the pen, touch .
Using the Magic Plus mode
In the Magic Plus mode, you can capture a photo with various eects.
Using the Magic Plus mode
Extended functions
56
6
Drag the corner of the box to adjust the size.
7
Drag the selected frame to place it to a desired location.
8
Press [
o
].
9
Adjust the transparency by moving the sliders or touching the +/-
icons to adjust.
Transparency
10
Align your subject in the frame, and then half-press [Shutter] to
focus.
•
To recapture a background photo, touch .
11
Press [Shutter] to capture a photo.
•
Press [
b
] to return to the previous screen.
12
Touch to save the photo.
•
Some shooting options are not available.
•
The focus is set to the transparent area in the frame.
•
The resolution is xed at .
Using the Magic Plus mode
Extended functions
57
Using the Motion Photo mode
In Motion Photo mode, you can capture and combine a series of photos, and then
select an area to be animated to create a GIF animation.
1
Rotate the mode dial to
g
.
2
Select .
•
To select another mode when the mode dial is set to
g
, press [
b
] or touch
, and then select a mode. You can also select another mode by pressing
[
m
] and selecting a mode.
3
Align your subject in the frame, and then half-press [Shutter] to
focus.
4
Press [Shutter] to capture the photo.
•
The camera captures multiple photos while the status lamp is blinking.
5
On the screen, draw an area to be animated.
•
You can select multiple areas.
IconDescription
Adjust the thickness of the brush.
+/-
Adjust the motion speed.
Recapture a photo.
Return to the previous screen.
6
Touch to save the photo.
•
The resolution is set to .
•
Use a tripod to prevent your camera from shaking.
•
It may take longer to save the le.
Using the Magic Plus mode
Extended functions
58
Using the Photo Filter mode
Apply various lter eects to your photos to create unique images.
MiniatureVignetting
Fish-eyeSketch
1
Rotate the mode dial to
g
.
2
Select .
•
To select another mode when the mode dial is set to
g
, press [
b
] or touch
, and then select a mode. You can also select another mode by pressing
[
m
] and selecting a mode.
3
Select an eect.
OptionDescription
Miniature
Apply a tilt-shift eect to make the subject appear in
miniature.
Vignetting
Apply the retro-looking colors, high contrast, and strong
vignette eect of Lomo cameras.
Ink Painting
Apply ink sketching eect.
Oil Painting
Apply an oil painting eect.
Cartoon
Apply a cartoon painting eect.
Cross Filter
Add lines that radiate outward from bright objects to
imitate the visual eect of a cross lter.
Sketch
Apply a pen sketch eect.
Soft Focus
Hide facial imperfections or apply dreamy eects.
Fish-eye
Blacken the edges of the frame and distort objects to
imitate the visual eect of a sheye lens.
Classic
Apply a black and white eect.
Retro
Apply a sepia tone eect.
Zooming Shot
Blur the edges of a photo to emphasize the subjects in
the center.
Using the Magic Plus mode
Extended functions
59
4
Align your subject in the frame, and then half-press [Shutter] to
focus.
5
Press [Shutter] to capture a photo.
•
Depending on the option you select, the resolution may change to or less
automatically.
•
To apply lter eects to saved photos, press [m] and then select Open Image
→
an image. You cannot select a video le, GIF le, or a photo captured in
Panorama mode.
Using the Movie Filter mode
Apply various lter eects to your videos to create unique images.
1
Rotate the mode dial to
g
.
2
Select .
•
To select another mode when the mode dial is set to
g
, press [
b
] or touch
, and then select a mode. You can also select another mode by pressing
[
m
] and selecting a mode.
3
Select an eect.
OptionDescription
Miniature
Apply a tilt-shift eect to make the subject appear in
miniature.
OptionDescription
Vignetting
Apply the retro-looking colors, high contrast, and strong
vignette eect of Lomo cameras.
Sketch
Apply a pen sketch eect.
Fish-eye
Blacken the edges of the frame and distort objects to
imitate the visual eect of a sheye lens.
Classic
Apply a black and white eect.
Retro
Apply a sepia tone eect.
Palette Eect 1
Create a vivid look with sharp contrast and strong color.
Palette Eect 2
Make scenes clean and clear.
Palette Eect 3
Apply a soft brown tone.
Palette Eect 4
Create a cold and monotone eect.
4
Press (Video recording) to start recording.
5
Press (Video recording) again to stop recording.
•
If you select Miniature, playback speed will increase.
•
If you select Miniature, you cannot record the sound in the video.
•
Depending on the option you select, the recording resolution may change to
or less automatically.
Using the Magic Plus mode
Extended functions
60
Using the Eect Artist mode
In Eect Artist mode, you can capture a photo with various lters or texture eects,
and then add brush or pen eects to it.
1
Rotate the mode dial to
g
.
2
Select .
•
To select another mode when the mode dial is set to
g
, press [
b
] or touch
, and then select a mode. You can also select another mode by pressing
[
m
] and selecting a mode.
3
Select an eect.
OptionDescription
Light
Create a light diusion eect.
Lomo
Mimic the lens eect of a Lomo camera.
Crack
Create a cracked ground eect.
Sepia
Apply a brown sepia tone.
Textile
Create a textile eect.
Old lm
Create the feeling of a photo taken with old lm.
OptionDescription
Crumpled paper
Create a crumpled paper eect.
Watercolor
Apply a watercolor painting eect.
Wave
Create a wave eect.
Cartoon
Apply a cartoon eect.
Sand
Create a sand eect.
Half Tone Dot
Create a halftone dot eect.
Bumpy Wall
Create a bumpy wall eect.
Sketch
Apply a pen sketch eect.
Sepia-Cartoon
Create a brownish cartoon eect.
4
Half-press [Shutter] to focus, and then press [Shutter] to capture a
background photo.
•
To select a background photo from your saved photos, press [
m
] and
then select Open Image→ an image. You cannot select a video le, GIF le,
or a photo captured in Panorama mode.
5
Touch Use.
•
To recapture a background photo, touch Retake.
Using the Magic Plus mode
Extended functions
61
6
Touch or , and then draw an area to apply an eect.
7
Touch an editing icon to edit the selected area.
•
Rotate [Zoom] to the right to enlarge a portion of the photo.
IconDescription
Switch the applied option.
Select a brush eect.
Select a pen eect.
Adjust the thickness of the brush or the pen.
IconDescription
Delete a brush eect.
Delete a pen eect.
Delete all applied eects.
Return to the editing mode.
Drag the screen to magnify other parts of the photo.
8
Touch to save the photo.
•
To recapture a background photo, touch .
•
The camera will save edited photos as new les.
•
The resolution is xed at .
Using the Magic Plus mode
Extended functions
62
Using the Color Brush mode
In Color Brush mode, you can capture a photo with lter eects, and then make an
area clearer or more colorful by drawing a line on it.
1
Rotate the mode dial to
g
.
2
Select .
•
To select another mode when the mode dial is set to
g
, press [
b
] or touch
, and then select a mode. You can also select another mode by pressing
[
m
] and selecting a mode.
3
Half-press [Shutter] to focus, and then press [Shutter] to capture a
background photo.
•
To select a background photo from your saved photos, press [
m
] and
then select Open Image→ an image. You cannot select a video le, GIF le,
or a photo captured in Panorama mode.
4
Touch Use.
•
To recapture a background photo, touch Back.
5
Select an option →.
OptionDescription
Classic
Apply a black and white eect.
OptionDescription
Sepia
Apply a brown sepia tone.
Blur
Create a softened and blurred eect.
Old lm
Create the feeling of a photo taken with old lm.
Sketch
Apply a pen sketch eect.
6
Draw a line with your nger to select an area.
•
Areas of the same color as the area you select will appear more colorful or
clearer.
•
You can also drag the slider or touch +/- to adjust the color range.
•
Areas with similar colors can be selected at the same time. If an unwanted
area is selected, touch
or to exclude the area.
Scope : 50
Using the Magic Plus mode
Extended functions
63
Editing a photo
You can edit a photo in multiple ways.
Rotate the mode dial to
g
, and then select .
Refer to "Editing a photo". (p. 99)
7
Touch an editing icon to edit the selected area.
•
Rotate [Zoom] to the right to enlarge a portion of the photo.
IconDescription
Switch the applied option.
Select an area automatically.
De-emphasize areas with the same color as the selected area.
De-emphasize the selected area only.
Return to the previous screen.
View the original image.
Return to the editing mode.
Drag the screen to magnify other parts of the photo.
8
Touch to save the photo.
•
To recapture a background photo, touch .
•
The camera will save edited photos as new les.
•
The resolution is xed at .
Extended functions
64
1
Rotate the mode dial to
p
,
G
,
s
,
i
,
g
or
T
.
•
This feature may not be supported in some modes.
2
Set desired options.
•
For a list of options, refer to "Shooting options". (p. 66)
3
Press (Video recording) to start recording.
•
While recording a video, press [
c
] once to cancel the continuous auto focus
function and once again to activate the function.
4
Press (Video recording) again to stop recording.
Pause recording
The camera allows you to temporarily pause a video while recording. With this
function, you can record separate scenes as a single video.
•
Press [
o
] to pause while recording.
•
Press [
o
] to resume.
Recording a video
Record Full HD videos (1920 X 1080) of up to 20 minutes. The camera saves recorded videos as MP4 (H.264) les.
•
H.264 (MPEG-4 part10/AVC) is a high-compression video format established by the international standards organizations ISO-IEC and ITU-T.
•
If you use memory cards with slow write speeds, the camera may not save videos properly. Video recordings may be corrupted or fail to play back correctly.
•
Memory cards with slow writing speeds will not support high-resolution videos. To record high-resolution videos, use memory cards with faster write speeds.
•
If you activate the Image Stabilization function while recording a video, the camera may record the sound of it operating.
•
If you use the zoom function when recording a video, the camera may record the noise of the zoom operating. To decrease zoom noise, use the Sound Alive function. (p. 88)
Recording a video
Extended functions
65
Recording a video with the Smart Scene Detection function
In Smart Auto mode, your camera automatically chooses the appropriate camera
settings based on the scene it has detected.
1
Rotate the mode dial to
T
.
2
Set the desired options.
•
For a list of options, refer to "Shooting options". (p. 66)
3
Align your subject in the frame.
•
The camera automatically selects a scene. An appropriate scene icon will
appear at the top left of the screen.
IconDescription
Landscapes
Sunsets
Blue skies
Forested areas
4
Press (Video recording) to start recording.
5
Press (Video recording) again to stop recording.
•
If the camera does not recognize an appropriate scene mode, it uses the default
settings for the Smart Scene Detection mode.
•
The camera may not select the correct scene depending on the shooting
conditions, such as camera shake, lighting, or distance to the subject.
Selecting a resolution and quality
…………… 67
Selecting a resolution
………………………… 67
Selecting a photo quality
……………………… 68
Shooting in the dark
…………………………… 69
Preventing red-eye
…………………………… 69
Using the ash
………………………………… 69
Setting a ash option
…………………………… 70
Adjusting the ISO sensitivity
…………………… 72
Changing the camera’s focus
…………………… 73
Using macro
…………………………………… 73
Using auto focus
……………………………… 73
Adjusting the focus area
……………………… 75
Adjusting the focus by touch
………………… 75
Using Face Detection
…………………………… 78
Detecting faces
………………………………… 78
Capturing a self portrait shot
………………… 78
Capturing a smile shot
………………………… 79
Tips for detecting faces
………………………… 79
Adjusting brightness and color
………………… 80
Adjusting the exposure manually (EV)
………… 80
Compensating for backlighting (ACB)
………… 81
Changing the metering option
………………… 81
Selecting a White Balance setting
……………… 82
Using burst modes
……………………………… 85
Capturing continuous photos
………………… 85
Using the timer
………………………………… 86
Capturing bracketed photos
…………………… 86
Adjusting images
………………………………… 87
Setting the sound of the zoom
………………… 88
Capturing still images while recording
a video
…………………………………………… 89
Shooting options
Learn how to set the options in Shooting mode.
Shooting options
67
Selecting a resolution and quality
Learn how to change the image resolution and quality settings.
Setting the video resolution
1
In Shooting mode, press [
m
].
2
Select Movie Size.
3
Select an option.
IconDescription
1920 X 1080: High-quality HD les to play back on an HDTV.
1280 X 720: HD les to play back on an HDTV.
640 X 480: SD les to play back on an analog TV.
For Sharing: Post to a sharing service via a wireless network
(30 seconds maximum).
Selecting a resolution
As you increase the resolution, your photo or video will include more pixels, so it
can be printed on larger paper or displayed on a larger screen. When you use a high
resolution, the le size will also increase.
Setting the photo resolution
1
In Shooting mode, press [
m
].
2
Select Photo Size.
3
Select an option.
IconDescription
4608 X 3456: Print on A1 paper.
4608 X 3072: Print on A1 paper in wide ratio (3:2).
4608 X 2592: Print on A1 paper in panorama ratio (16:9) or play
back on an HDTV.
3648 X 2736: Print on A2 paper.
2832 X 2832: Print on A3 paper in 1:1 ratio.
2592 X 1944: Print on A4 paper.
1984 X 1488: Print on A5 paper.
1920 X 1080: Print on A5 paper in panorama ratio (16:9) or play
back on an HDTV.
1024 X 768: Attach to an email.
TpAhMsig
Selecting a resolution and quality
Shooting options
68
Selecting a photo quality
Set a photo quality setting. Higher image quality settings will result in larger le
sizes. The camera compresses and saves the photos you capture in the JPEG format.
1
In Shooting mode, press [
m
].
2
Select Quality.
3
Select an option.
IconDescription
Super Fine: Capture photos in super high quality.
Fine: Capture photos in high quality.
Normal: Capture photos in normal quality.
pAhMig
Shooting options
69
Shooting in the dark
Learn how to capture photos at night or in low light conditions.
Using the ash
Press the ash pop-up button to pop the ash
up. When the ash unit pops up, the ash
res in accordance with the option you have
selected. If you select O, the ash does not
re even when it is popped up.
•
While not in use, keep the ash unit closed to prevent damage.
•
Forcing open the ash unit may cause damage to your camera. Press down
gently to close it.
Preventing red-eye
If the ash res when you capture a photo of a person in the dark, a red glow may
appear in the person’s eyes. To prevent this, select Red-eye or Red-eye Fix. Refer to
ash options in "Setting a ash option." (p. 70)
S
Before correction
S
After correction
ps
Shooting in the dark
Shooting options
70
Setting a ash option
Use the ash when you capture photos in the dark or when you need more light in
your photos.
1
Press the ash pop-up button to open the ash.
2
In Shooting mode, press [
F
].
TpAhMsg
3
Select an option.
IconDescription
O:
•
The ash will not re.
•
The camera will display the shake warning when you are
shooting in low light.
Auto: The camera will select a proper ash setting for the scene it
detects in Smart Auto mode.
Auto: The ash will re automatically when the subject or
background is dark.
Red-eye:
•
The ash will re twice when the subject or background is dark to
reduce the red-eye eect.
•
There is an interval between the 2 bursts of the ash. Do not move
until the ash res a second time.
Fill in:
•
The ash always res.
•
The camera automatically adjusts the intensity of the ash.
Shooting in the dark
Shooting options
71
IconDescription
Slow Sync:
•
The ash res and the shutter stays open longer.
•
This option is recommended when you want to capture more
ambient light to reveal more details in the background.
•
Use a tripod to prevent your photos from blurring.
•
The camera will display the shake warning when you are
shooting in low light.
Red-eye Fix:
•
The ash res twice when the subject or background is dark. The
camera corrects red-eye through its advanced software analysis.
•
There is an interval between the 2 bursts of the ash. Do not move
until the ash res a second time.
Available options may dier depending on the shooting conditions.
•
Flash options are not available if you set Burst options or select Self-Portrait.
•
Make sure that your subjects are within the recommended distance from the
ash. (p. 158)
•
If light from the ash is reected or there is a substantial amount of dust in the
air, tiny spots may appear in your photo.
•
In some modes, you can also set the ash option by pressing [
m
], and then
selecting Flash.
Adjusting the ash intensity
Adjust the ash intensity to avoid over-exposed or under-exposed photos.
1
In Shooting mode, press [
F
].
2
Scroll to an option.
3
Press [
D
].
4
Press [
F
/
t
] to adjust the intensity.
•
You can also drag the slider or touch +/- to adjust the intensity.
Auto : 0
BackSet
Shooting in the dark
Shooting options
72
Adjusting the ISO sensitivity
The ISO sensitivity is the measure of a lm’s sensitivity to light as dened by the
International Organization for Standardization (ISO). The higher ISO sensitivity you
select, the more sensitive to light your camera becomes. Use a higher ISO sensitivity
to capture better photos and reduce camera shake when not using the ash.
1
In Shooting mode, press [
m
].
2
Select ISO.
3
Select an option.
•
Select to use an appropriate ISO sensitivity based on the brightness of
the subject and lighting.
Higher ISO sensitivities may result in more image noise.
pAhM
5
Press [
o
] to save your settings.
•
Adjusting the ash intensity may not be eective if:
-
the subject is too close to the camera
-
you set a high ISO sensitivity
-
the exposure value is too big or too small
•
In some shooting modes, you cannot use this function.
Shooting options
73
Using macro
Use macro to capture close-up photos of subjects, such as owers or insects.
Refer to "Using auto focus".
•
Try to hold the camera rmly to prevent blurry photos.
•
Turn o the ash if the distance to the subject is less than 15.7 in. (40 cm).
TpAhMsg
Using auto focus
To capture sharp photos, select the appropriate focus option according to your
distance from the subject.
1
In Shooting mode, press [
c
].
Focus : Normal (AF)
Exit
Set
TpAhMsg
Changing the camera’s focus
Learn how to adjust the camera’s focus to suit the subject and the shooting conditions.
Changing the camera’s focus
Shooting options
74
Adjusting the focus manually
1
In Shooting mode, press [
c
].
2
Select Manual Focus.
3
Press [
F
/
t
] to adjust the focus.
•
You can also drag the slider or touch +/- to adjust the focus.
BackSet
Manual Focus : 50
4
Press [
o
] to save your settings.
When you adjust the focus manually and the subject is out of focus, the photo may
be blurry.
pAhM
2
Select an option.
IconDescription
Normal (AF): Focus on a subject farther than 31 in. (80 cm) away.
Farther than 138 in. (350 cm) away when you use the zoom.
Manual Focus: Focus on a subject by adjusting the focus manually.
(p. 74)
Macro: Focus on a subject that is 4-31 in. (10–80 cm) from the
camera. 59-138 in. (150–350 cm) when you use the zoom.
Auto Macro:
•
Focus on a subject farther than 4 in. (10 cm) away. Farther than
59 in. (150 cm) away when you use the zoom.
•
Auto Macro is set automatically in some shooting modes.
Available options may dier depending on the shooting conditions.
In some modes, you can also set the focus option by pressing [
m
], and then
selecting Focus.
Changing the camera’s focus
Shooting options
75
Adjusting the focus area
You can get clearer photos by selecting an appropriate focus area according to your
subject's location in the scene.
1
In Shooting mode, press [
m
].
2
Select Focus Area.
3
Select an option.
IconDescription
Center AF: Focus on the center of the frame (suitable when subjects
are located at or near the center).
Multi AF: Focus on one or more of 9 possible areas.
Available shooting options may dier depending on the shooting mode.
pAhM
Adjusting the focus by touch
Focus on the subject or capture a photo by touching the screen.
1
In Shooting mode, press [
m
].
2
Select Touch AF.
3
Select an option.
IconDescription
O: Do not use the touch AF function.
Touch AF: Focus on the subject that you touch on the screen.
Tracking AF: Focus on and track the subject that you touch on the
screen. (p. 76)
One touch shot: Focus on the subject and capture a photo by
touching the image on the screen. (p. 77)
Available options may dier depending on the shooting conditions.
The focus will reset when you perform no operations for 5 seconds or press
[Shutter] while the touch AF function is on.
TpAhMs
Changing the camera’s focus
Shooting options
76
4
Press [Shutter] to capture the photo.
•
If you do not select a focus area, the focus frame will appear in the center of the
screen.
•
Tracking a subject may fail when:
-
the subject is too small
-
the subject moves excessively
-
the subject is backlit or you are shooting in a dark place
-
colors or patterns on the subject and the background are the same
-
the subject includes horizontal patterns, such as blinds
-
the camera shakes excessively
•
When tracking fails, the feature will be reset.
•
If the camera fails to track the subject, you must reselect the subject to track.
•
If the camera fails to focus, the focus frame will change to red and the focus will
be reset.
Using tracking auto focus
Tracking AF allows you to track and automatically focus on your subject, even when
you are moving.
1
In Shooting mode, press [
m
].
2
Select Touch AF→Tracking AF.
3
Touch the subject you want to track in the touch area.
•
A focus frame appears on the subject and follows the subject as you move
the camera.
•
The white frame means that your camera is tracking the subject.
•
When you half-press [Shutter], the green frame means that your subject is in
focus.
•
The red frame means that your camera failed to focus.
Changing the camera’s focus
Shooting options
77
Using One Touch Shot
You can capture a photo with the touch of your nger. As you touch a subject, the
camera focuses on the subject automatically and captures a photo.
1
In Shooting mode, press [
m
].
2
Select Touch AF→One touch shot.
3
Touch the subject to capture a photo.
If you use this function, you cannot set Timer, Intelli zoom, and Burst options.
Shooting options
78
Detecting faces
Your camera automatically detects up to 10 human faces in one scene.
1
In Shooting mode, press [
m
].
2
Select Face Detection→Normal.
The face nearest the camera or nearest
the center of the scene appears in a
white focus frame and the rest of the
faces appear in gray focus frames.
The closer you are to the subjects, the quicker your camera will detect faces.
Capturing a self portrait shot
Capture photos of yourself. The camera sets the focus distance to close-up, and then
emits a beep when ready.
1
In Shooting mode, press [
m
].
2
Select Face Detection→Self-Portrait.
3
Compose your shot with the lens facing you.
4
When you hear a quick beep, press [Shutter].
When faces are located in the center,
the camera beeps rapidly.
If you turn Volume o in the sound settings, the camera will not emit a beep.
(p. 139)
Using Face Detection
If you use Face Detection options, your camera can automatically detect a human face. When you focus on a human face, the camera adjusts the exposure automatically. Use
Smile Shot to capture a smiling face.
pAhMs
Using Face Detection
Shooting options
79
Capturing a smile shot
The camera automatically releases the shutter when it detects a smiling face.
1
In Shooting mode, press [
m
].
2
Select Face Detection→Smile Shot.
3
Compose your shot.
•
The camera automatically releases the shutter when it detects a smiling face.
When your subject smiles
broadly, your camera can detect
the smile more easily.
Tips for detecting faces
•
When your camera detects a face, it tracks the detected face automatically.
•
Face Detection may not be eective when:
-
the subject is far from the camera (The focus frame will appear orange
for Smile Shot.)
-
it is too bright or too dark
-
the subject is not facing the camera
-
the subject is wearing sunglasses or a mask
-
the subject’s facial expression changes drastically
-
the subject is backlit or the lighting conditions are unstable
•
When you set Face Detection options, the AF area is automatically set to Multi AF.
•
Depending on the Face Detection options you selected, some shooting options
may not be available.
Shooting options
80
Adjusting brightness and color
Learn how to adjust the brightness and color for better image quality.
3
Press [
F
/
t
] to adjust the exposure.
•
You can also drag the dial on the screen to adjust the exposure.
•
The photo will be brighter as the exposure value increases.
BackSet
EV : 0
4
Press [
o
] to save your settings.
•
Once you adjust the exposure, the setting will be stored automatically. You
may need to change the exposure value later to avoid overexposure or
underexposure.
•
If you cannot decide on an appropriate exposure, select the AE Bracket (Auto
Exposure Bracket) option. The camera will capture 3 consecutive photos, each
with a dierent exposure: normal, underexposed, and overexposed. (p. 86)
Adjusting the exposure manually (EV)
Depending on the intensity of the ambient light, your photos may be too bright or
dark. In these cases, you can adjust the exposure to get a better photo.
S
Darker (-)
S
Neutral (0)
S
Brighter (+)
1
In Shooting mode, press [
m
].
2
Select EV.
•
You can also touch the exposure value on the screen to open the adjustment
window.
pAh
Adjusting brightness and color
Shooting options
81
Compensating for backlighting (ACB)
When the light source is behind your subject or there is high contrast between your
subject and the background, your subject is likely to appear dark in the photo. In
this case, set the Auto Contrast Balance (ACB) option.
▲ Without ACB▲ With ACB
1
In Shooting mode, press [
m
].
2
Select ACB.
3
Select an option.
IconDescription
O: ACB (Auto Contrast Balance) is deactivated.
On: ACB (Auto Contrast Balance) is activated.
The ACB feature is always on in Smart Auto mode.
pAhM
Changing the metering option
The metering mode refers to the way in which a camera measures the quantity
of light. The brightness and lighting of your photos will vary depending on the
metering mode you select.
1
In Shooting mode, press [
m
].
2
Select Metering.
3
Select an option.
IconDescription
Multi:
•
Your camera divides the frame into several areas, and then
measures the light intensity of each area.
•
Suitable for general photos.
Spot:
•
Your camera measures only the light intensity at the very center of
the frame.
•
If a subject is not in the center of the frame, your photo may be
improperly exposed.
•
Suitable for a subject with backlighting.
Center-weighted:
•
Your camera averages the meter reading of the entire frame with
emphasis placed on the center.
•
Suitable for photos with subjects in the center of the frame.
pAhM
Adjusting brightness and color
Shooting options
82
Selecting a White Balance setting
The color of your photo depends on the type and quality of the light source. If you
want the color of your photo to be realistic, select a White Balance setting that
is appropriate for the lighting conditions, such as Auto WB, Daylight, Cloudy, or
Tungsten.
Auto WB
Daylight
Cloudy
Tungsten
pAhM
1
In Shooting mode, press [
m
].
2
Select White Balance.
3
Select an option.
IconDescription
Auto WB: Automatically set the White Balance based on the lighting
conditions.
Daylight: For outdoor photos on a sunny day.
Cloudy: For outdoor photos on a cloudy day or in shadows.
Fluorescent_H: For shooting under a daylight uorescent or 3-way
uorescent light.
Fluorescent_L: For shooting under white uorescent light.
Tungsten: For shooting indoor photos under incandescent bulbs or
halogen lamps.
Color Temp.: To adjust the color temperature of the light source.
(p. 83)
Custom Set: To use White Balance settings that you dene. (p. 84)
Adjusting brightness and color
Shooting options
83
Customizing preset White Balance options
You can customize preset White Balance options except Auto WB and Custom Set.
1
In Shooting mode, press [
m
].
2
Select White Balance.
3
Scroll to a desired option.
4
Press [
D
].
5
Press [
D
/
c
/
F
/
t
] to adjust the value on the coordinates.
•
You can also touch an area on the screen.
•
G: Green
•
A: Amber
•
M: Magenta
•
B: Blue
Back
Set
White Balance : Daylight
6
Press [
o
] to save your settings.
Adjusting color temperature
1
In Shooting mode, press [
m
].
2
Select White Balance→Color Temp..
3
Press [
D
].
4
Press [
F
/
t
] to adjust the color temperature to match your light
source.
•
You can also drag the slider or touch +/- to adjust the color temperature.
•
You can capture a warmer photo (more yellow/red) by dragging the slider to
a higher color temperature (towards 10000K). You can capture a cooler photo
(more blue) by dragging the slider to a cooler color temperature (towards
3000K).
Color Temperature : 6500 K
BackSet
5
Press [
o
] to save your settings.
Adjusting brightness and color
Shooting options
84
Dening your own White Balance
You can customize the White Balance by capturing a photo of a white surface, such
as a piece of paper, under the lighting conditions in which you intend to capture a
photo. The White Balance feature will help you to match the colors in your photo
with the actual scene.
1
In Shooting mode, press [
m
].
2
Select White Balance→Custom Set.
3
Aim the lens at a piece of white paper, and then press [Shutter].
A piece of white paper
Shooting options
85
Using burst modes
It can be dicult to capture photos of fast-moving subjects or capture natural facial expressions and gestures of your subjects in photos. Also, it can be dicult to adjust the
exposure correctly and select a proper light source. In these cases, select one of the burst modes. You can also set the timer to delay shooting.
pAhMsig
3
Align your subject in the frame, and then half-press [Shutter] to
focus.
4
Press and hold [Shutter].
•
While you are pressing [Shutter], the camera captures photos continuously.
•
Available options may dier depending on the shooting conditions.
•
Depending on the Face Detection options you selected, some shooting options
may not be available.
•
It may take longer to save the photos depending on the memory card capacity
and performance.
•
In some modes, you can also set the shooting option by pressing [
m
], and
then selecting Drive/Timer.
Capturing continuous photos
1
In Shooting mode, press [
t
].
2
Select an option.
IconDescription
Continuous High: Capture 7.1 photos per second continuously.
(You can capture up to 6 photos in one burst.)
Continuous Normal: Capture 3 photos per second continuously.
(You can capture up to 6 photos in one burst.)
Single: Capture a single photo. (Single is not a burst option.)
Using burst modes
Shooting options
86
Using the timer
1
In Shooting mode, press [
t
].
2
Select an option.
IconOption
2 sec: Capture a photo after a 2-second delay.
10 sec: Capture a photo after a 10-second delay.
•
Press [Shutter] to cancel the timer.
•
In some modes, you can also set the shooting option by pressing [
m
], and
then selecting Drive/Timer or Timer.
Capturing bracketed photos
You can use the automatic exposure bracketing feature to capture multiple photos
of the same subject with dierent exposure values.
1
In Shooting mode, press [
t
].
2
Select AE Bracket.
•
When you press [Shutter], the camera captures 3 consecutive photos, each with
a dierent exposure: normal, underexposed, and overexposed.
•
Press [
m
], and then select AE Bracket Settings to set exposure values.
•
It may take longer to capture a photo. Use a tripod for best results.
Shooting options
87
Adjusting images
Adjust the sharpness, contrast, or saturation of your photos.
pAhM
4
Press [
F
/
t
] to adjust each value.
•
You can also drag the sliders or touch +/- to adjust the values.
SharpnessDescription
–
Soften the edges on your photos (suitable for editing the
photos on your computer).
+
Sharpen the edges to improve the clarity of your photos.
(This may also increase the noise in your photos.)
ContrastDescription
–
Decrease the color and brightness.
+
Increase the color and brightness.
SaturationDescription
–
Decrease the saturation.
+
Increase the saturation.
5
Press [
o
] to save your settings.
Select 0 if you do not want to apply any eects (suitable for printing).
1
In Shooting mode, press [
m
].
2
Select Image Adjust.
3
Select an option.
•
Sharpness
•
Contrast
•
Saturation
Image Adjust : Sharpness
BackSet
Sharpness
Contrast
Saturation
Shooting options
88
Setting the sound of the zoom
When you use the zoom while recording videos, the camera can record the sound of the zoom. Use the Sound Alive function to reduce the zoom noise.
TpAhMsig
1
In Shooting mode, press [
m
].
2
Select Voice.
3
Select an option.
IconDescription
Sound Alive On: Turn on the Sound Alive function to reduce the
zoom noise.
Sound Alive O: Turn o the Sound Alive function. The camera can
record the zoom noise.
•
Do not block the microphone when you use the Sound Alive function.
•
Recordings made with Sound Alive may dier from actual sounds.
Shooting options
89
Capturing still images while recording a video
You can capture still images while recording a video without switching to the photo shooting modes (up to 6 photos).
TpAhMsig
•
Captured images will be automatically resized, depending on the size of the
recorded video.
•
The quality of images captured while recording a video may be lower than those
captured normally.
•
This feature may not be supported in some modes.
1
Rotate the mode dial to
p
,
G
,
s
,
i
,
g
or
T
.
2
Press (Video recording) to start recording.
3
Press [Shutter] to capture images.
•
When you pause video recording, you cannot capture still images by pressing
[Shutter].
•
Captured images will be saved automatically.
Images captured while recording
a video
4
Press (Video recording) again to stop recording.
Viewing photos or videos in Playback mode
… 91
Starting Playback mode
……………………… 91
Viewing photos
………………………………… 96
Playing a video
………………………………… 98
Editing a photo
………………………………… 99
Resizing photos
………………………………… 99
Rotating a photo
……………………………… 99
Cropping a photo
……………………………… 100
Applying Smart Filter eects
…………………… 100
Adjusting dark subjects, brightness, contrast,
or saturation
…………………………………… 101
Adjusting portrait photos
……………………… 102
Editing a video
…………………………………… 103
Trimming a video
……………………………… 103
Capturing an image from video
……………… 103
Viewing les on a TV
…………………………… 104
Transferring les to the computer
…………… 105
Transferring les to your Windows OS
computer
……………………………………… 105
Transferring les to your Mac OS computer
…… 106
Using programs on the computer
…………… 108
Installing i-Launcher
…………………………… 108
Using i-Launcher
……………………………… 109
Playback/Editing
Learn how to play back photos or videos, and edit photos. Also, learn how to connect your camera to your
computer or TV.
Playback/Editing
91
Starting Playback mode
View photos or play videos stored in your camera.
1
Press [
P
].
•
The most recent le will be displayed.
•
If the camera is o, it will turn on and display the most recent le.
2
Press [
F
/
t
] to scroll through les.
•
You can also drag the image left or right to move to another le.
•
Press and hold [
F
/
t
] to scroll through les quickly.
•
If you want to view les stored in the internal memory, remove your memory
card.
•
You may not be able to edit or play back les that were captured with other
cameras, due to unsupported sizes (image size, etc) or codecs. Use a computer or
another device to edit or play back these les.
•
Photos or videos captured in portrait orientation do not rotate automatically and
are displayed in landscape orientation by the camera and other devices.
Photo le information
File Information
Histogram
Memory in use
IconDescription
Current le/Total les
Folder name-File name
Photo captured continuously (See "Viewing les as a folder", p. 92)
Protected le
Transfer or share the le
View les as thumbnails (p. 93)
To display le information on the screen, press [
D
].
Viewing photos or videos in Playback mode
Learn how to play back photos or videos and how to manage les.
Viewing photos or videos in Playback mode
Playback/Editing
92
Video le information
File Information
IconDescription
Current le/Total les
Folder name-File name
Video le
GIF le: The le captured in Motion Photo mode
Protected le
Play videos
Transfer or share the le
View les as thumbnails (p. 93)
To display le information on the screen, press [
D
].
Viewing les as a folder
Photos captured continuously appear as a folder.
1
In Playback mode, press [
F
/
t
] or drag the image left or right to
move to a desired folder.
•
The camera will automatically play back photos in the folder.
Single View
2
Press [
o
] or rotate [Zoom] to the right to open the folder.
•
You can also touch Single View on the screen to open the folder.
3
Press [
F
/
t
] or drag the image left or right to move to another le.
4
Press [
o
] or rotate [Zoom] to the left to return to Playback mode.
•
You can also touch to return to Playback mode.
Viewing photos or videos in Playback mode
Playback/Editing
93
Viewing les as thumbnails
Scan thumbnails of les.
In Playback mode, rotate [Zoom] to the left to view thumbnails
(12 at a time). Rotate [Zoom] to the left once more to display more
thumbnails (24 at a time). Rotate [Zoom] to the right to return to
the previous view.
Touch a le to display it in full screen
view.
•
Press [
D
/
c
/
F
/
t
] or drag the screen up or down to move to the previous or
next page of thumbnails.
•
In thumbnail view, touch and hold les or press [
m
] to select them, and then
delete or transfer them.
Viewing les by category
View les by category, such as date or le type.
1
In Playback mode, rotate [Zoom] to the left.
2
Press [
m
], and then select Filter→ a category.
•
You can also touch to select a category.
All
Date
File Type
Filter
Back
Set
IconDescription
All: View les normally.
Date: View les by the date they were saved.
File Type: View les by the le type.
Viewing photos or videos in Playback mode
Playback/Editing
94
3
Select a list to open it.
4
Select a le to view it.
5
Rotate [Zoom] to the left to return to the previous view.
•
You can also touch to return to the previous view.
If you change the category, it may take some time for the camera to reorganize
les depending on the number of les.
Protecting a le
Protect a le from accidental deletion.
1
In Playback mode, select a le to protect.
2
Press [
m
], and then select Protect→On.
3
Repeat steps 1 and 2 to protect additional les.
You cannot delete or rotate a protected le.
Deleting les
Select les to delete in Playback mode.
Deleting a single le
You can select one le, and then delete it.
1
In Playback mode, select a le, and then press [/
f
].
2
When the pop-up message appears, select Yes.
•
You can also delete les in Playback mode by pressing [
m
], and then
selecting Delete→Delete→Ye s .
•
You can also delete les in thumbnail view by touching and holding the le, and
then selecting
→OK.
Viewing photos or videos in Playback mode
Playback/Editing
95
Deleting multiple les
You can select multiple les, and then delete them at once.
1
In Playback mode, press [
m
].
•
When in thumbnails view, press [
m
], select Delete → Select, and then
skip to step 3, or press [
/
f
], select Select, and then skip to step 3.
2
Select Delete→Multiple Delete.
3
Scroll to each le you want to delete, and then press [
o
].
•
Press [
o
] again to cancel your selection.
4
Press [/
f
].
5
When the pop-up message appears, select Yes.
Deleting all les
You can select all les, and then delete them at once.
1
In Playback mode, press [
m
].
•
When in thumbnails view, press [
m
], select Delete → Delete All, and
then skip to step 3, or press [
/
f
], select Delete All, and then skip to step 3.
2
Select Delete→Delete All.
3
When the pop-up message appears, select Yes.
•
All unprotected les are deleted.
Viewing photos or videos in Playback mode
Playback/Editing
96
Viewing photos
Enlarge part of a photo or view photos as a slide show.
Enlarging a photo
In Playback mode, rotate [Zoom] to the right to enlarge a portion of
the photo. Rotate [Zoom] to the left to zoom out.
Enlarged area
BackCrop
ToDescription
Move the enlarged area
•
Press [
D
/
c
/
F
/
t
].
•
Drag the screen to see another part of the photo.
Trim the enlarged photo
Press [
o
], and then select Yes . (The trimmed photo
will be saved as a new le. The original photo is
retained in its original form.)
•
You can also pinch your ngers together or spread them apart on the screen to
reduce or enlarge a photo.
•
When you view photos that were captured by another camera, the zoom ratio
may dier.
Viewing photos or videos in Playback mode
Playback/Editing
97
Viewing panoramic photos
View photos captured in Panorama mode.
1
In Playback mode, scroll to a panoramic photo.
•
The entire panoramic photo appears on the screen.
2
Press [
o
] or touch .
•
The camera automatically scrolls through the photo from left to right for a
horizontal panoramic photo and from top to bottom for a vertical panoramic
photo. The camera then switches to Playback mode.
•
While playing back a panoramic photo, press [
o
] to pause or resume.
•
After you have paused the playback of a panoramic photo, press
[
D
/
c
/
F
/
t
] or drag the image to move the photo horizontally or
vertically, depending on the direction you moved when capturing the photo.
3
Press [
b
] to return to Playback mode.
You can play the panoramic photo by pressing [
o
] or touching only if the
longest side of the photo is two or more times longer than the shortest side.
Playing a slide show
Apply eects to a slide show of your photos. The slide show function does not work
for videos and GIF les.
1
In Playback mode, press [
m
].
2
Select Slide Show Options.
3
Select a slide show eect option.
•
Skip to step 4 to start a slide show with no eects.
* Default
OptionDescription
Play Mode
Set whether or not to repeat the slide show. (One Play*, Repeat)
Interval
•
Set the interval between photos. (1 sec*, 3 sec, 5 sec, 10 sec)
•
You must set the Eect option to O to set the interval.
Eect
•
Set a scene change eect between photos. (O, Calm*, Shine,
Relax, Lively, Sweet)
•
Select O to cancel eects.
•
When you use the Eect option, the interval between photos
will be set to 1 second.
4
Press [
b
].
Viewing photos or videos in Playback mode
Playback/Editing
98
5
Select Start Slide Show.
6
View the slide show.
•
Press [
o
] to pause the slide show.
•
Press [
o
] again to resume the slide show.
Press [
b
] to stop the slide show and return to Playback mode.
Playing a video
In Playback mode, you can view a video and an animated photo.
1
In Playback mode, select a video, and then press [
o
] or touch .
2
View the video.
Current playback time/
Video length
Stop
IconDescription
/
Move to the previous le/Scan backward. (Each time you touch the
scan backward icon, you change the scan speed in this order: 2X,
4X, 8X.)
/
Pause or resume playback.
/
Move to the next le/Scan forward. (Each time you touch the scan
forward icon, you change the scan speed in this order: 2X, 4X, 8X.)
Adjust the volume or mute the sound.
•
You can also rotate [Zoom] to the left or right to adjust the volume level.
•
When playing a movie, you can begin using features such a scanning backward
or scanning forward after the video has run for 2 seconds.
Viewing animated photos
View animated GIF les repeatedly that were captured in Motion Photo mode.
1
In Playback mode, scroll to a GIF le.
2
Press [
o
] or touch .
3
Press [
b
] to return to Playback mode.
Playback/Editing
99
Resizing photos
Change the size of a photo and save it as a new le.
1
Rotate the mode dial to
g
, and then select .
•
You can also press [
m
], and then select Edit Image.
2
Rotate [Zoom] to the left or touch to select a photo.
3
Touch , and then touch an option.
Resize : 2592 X 1944
4
Touch to save.
Available resize options dier depending on the original size of the photo.
Rotating a photo
1
Rotate the mode dial to
g
, and then select .
•
You can also press [
m
], and then select Edit Image.
2
Rotate [Zoom] to the left or touch to select a photo.
3
Touch , and then touch an option.
Rotate : Right 90˚
4
Touch to save.
The camera will overwrite the original le.
Editing a photo
Learn how to edit photos.
•
The camera will save edited photos as new les.
•
When you edit photos, the camera will automatically convert them to a lower resolution. Photos that you rotate or resize manually are not automatically converted to a lower
resolution.
•
You cannot edit photos while viewing les as a folder. Open the folder and select a photo to edit each photo.
•
Photos captured in some modes cannot be edited.
Editing a photo
Playback/Editing
100
Cropping a photo
1
Rotate the mode dial to
g
, and then select .
•
You can also press [
m
], and then select Edit Image.
2
Rotate [Zoom] to the left or touch to select a photo.
3
Touch , and then drag the frame to a desired location.
4
Adjust the size of the area by dragging the corners of the box.
5
Touch to save.
Applying Smart Filter eects
Apply special eects to your photos.
1
Rotate the mode dial to
g
, and then select .
•
You can also press [
m
], and then select Edit Image.
2
Rotate [Zoom] to the left or touch to select a photo.
3
Touch , and then touch an option.
4
Touch .
Smart Filter : Miniature
OptionDescription
O
No eect
Miniature
Apply a tilt-shift eect to make the subject appear in
miniature. (The top and bottom of the photo will be blurred.)
Editing a photo
Playback/Editing
101
OptionDescription
Vignetting
Apply the retro-looking colors, high contrast, and strong
vignette eect of Lomo cameras.
Ink Painting
Apply ink sketching eect.
Oil Painting
Apply an oil painting eect.
Cartoon
Apply a cartoon eect.
Cross Filter
Add lines that radiate outward from bright objects to imitate
the visual eect of a cross lter.
Sketch
Apply a pen sketch eect.
Soft Focus
Hide facial imperfections or apply dreamy eects.
Fish-eye
Distort close objects to imitate the visual eect of a sheye
lens.
Classic
Apply a black and white eect.
Retro
Apply a sepia tone eect.
Zooming Shot
Blur the edges of a photo to emphasize the subjects in the
center.
5
Touch to save.
Adjusting dark subjects, brightness, contrast, or saturation
Learn how to adjust the brightness, contrast, or saturation. If the center of a photo is
dark, you can adjust it to be brighter. The camera will save an edited photo as a new
le, but may convert it to a lower resolution.
•
You can adjust brightness, contrast, and saturation and apply Smart Filter eects
at the same time.
•
If you have applied the ACB eect, you cannot adjust brightness, contrast, or
saturation. If you have adjusted brightness, contrast, or saturation, you cannot
apply the ACB eect.
1
Rotate the mode dial to
g
, and then select .
•
You can also press [
m
], and then select Edit Image.
2
Rotate [Zoom] to the left or touch to select a photo.
3
Touch , and then select an adjusting option.
IconDescription
ACB (Adjust dark subjects)
Brightness
Contrast
Saturation
•
If you selected , skip to step 6.
Editing a photo
Playback/Editing
102
4
Press [
F
/
t
] to adjust the option.
•
You can also drag the slider or touch +/- to adjust the option.
5
Touch →.
6
Touch to save.
Adjusting portrait photos
Learn how to correct red-eye and retouch faces. The camera will save an edited
photo as a new le, but may convert it to a lower resolution.
If you have applied the ACB eect, you cannot apply Face Retouch, and Red-eye Fix
eects at the same time.
Removing red-eye
1
Rotate the mode dial to
g
, and then select .
•
You can also press [
m
], and then select Edit Image.
2
Rotate [Zoom] to the left or touch to select a photo.
3
Touch , and then touch Red-eye Fix.
4
Touch to save.
Retouching faces
1
Rotate the mode dial to
g
, and then select .
•
You can also press [
m
], and then select Edit Image.
2
Rotate [Zoom] to the left or touch to select a photo.
3
Touch , and then touch Face Retouch.
4
Press [
F
/
t
] to adjust the option.
•
You can also drag the slider or touch +/- to adjust the option.
•
As the number increases, the skin tone becomes brighter and smoother.
5
Touch to save.
Playback/Editing
103
Editing a video
While playing back a video, you can trim the video or capture an image from the video.
10
When the pop-up message appears, select Yes.
•
The original video should be at least 10 seconds long.
•
You can trim videos anywhere between 2 seconds from the beginning and
2 seconds from the end of the video.
•
The camera will save the edited video as a new le and leave the original video
intact.
Capturing an image from video
1
While viewing a video, press [
o
] or touch at the point where you
want to capture an image.
2
Press [
c
] or touch Capture.
•
The resolution of the captured image will be the same as the original video.
•
The captured image is saved as a new le.
Trimming a video
1
In Playback mode, select a video, and then press [
m
].
2
Select Trim video.
3
Press [
o
] or touch to start playing the video.
4
Press [
o
] or touch at the point where you want the trimming to
begin.
5
Press [
c
] or touch Start Point.
6
Press [
o
] or touch to resume playing the video.
7
Press [
o
] or touch at the point where you want the trimming to
end.
8
Press [
c
] or touch End Point.
9
Press [
c
] or touch Trim to trim a video.
•
You can adjust the scene to be cropped by dragging the handles that appear
on the progress bar.
Playback/Editing
104
Viewing les on a TV
Play back photos or videos by connecting your camera to a TV with the A/V cable.
6
Turn on your TV, and then select the A/V video source with the TV
remote control.
7
Turn on your camera.
•
The camera automatically enters Playback mode when you connect it to a TV.
8
View photos or play videos using the camera buttons.
•
Depending on the TV model, you may see some digital noise or part of an image
may not appear.
•
Images may not be centered on the TV screen depending on your TV settings.
1
Rotate the mode dial to
n
.
2
Select Connectivity→Video Out.
3
Select the video signal output for your country or region. (p. 140)
4
Turn o your camera and TV.
5
Connect your camera to your TV with the A/V cable.
VideoAudio
Playback/Editing
105
Transferring les to your Windows OS computer
Connect the camera to your computer as a removable disk.
Your computer must be running Windows XP, Windows Vista, Windows 7, or
Windows 8 for you to connect the camera as a removable disk.
1
Rotate the mode dial to
n
.
2
Select Connectivity→i-Launcher→O.
3
Turn o the camera.
4
Connect the camera to your computer with the USB cable.
You must plug the small end of the USB cable into your camera. If the cable is
reversed, it may damage your les. The manufacturer is not responsible for any
loss of data.
5
Turn on the camera.
•
The computer recognizes the camera automatically.
6
On your computer, select My Computer→Removable Disk→
DCIM→100PHOTO.
7
Drag or save les to your computer.
Transferring les to a computer
Connect the camera to a computer to transfer les from the camera's memory card to the computer.
Transferring les to a computer
Playback/Editing
106
Disconnecting the camera (for Windows XP)
With Windows Vista, Windows 7 and Windows 8, the methods for disconnecting the
camera are similar.
1
If the status lamp on your camera is blinking, wait until it stops.
2
Click on the tool bar at the bottom right of your computer
screen.
3
Click the pop-up message.
4
Click the message box that indicates the camera can be removed
safely.
5
Remove the USB cable.
Transferring les to your Mac OS computer
When you connect the camera to your Mac OS computer, the computer will
automatically recognize the device. You can transfer les directly from the camera to
the computer without installing any programs.
Mac OS 10.5 or later is supported.
1
Turn o the camera.
2
Connect your camera to your Mac OS computer with the USB cable.
You must plug the small end of the USB cable into your camera. If the cable is
reversed, it may damage your les. The manufacturer is not responsible for any
loss of data.
Transferring les to a computer
Playback/Editing
107
3
Turn on the camera.
•
The computer recognizes the camera automatically and displays a removable
disk icon.
4
On your computer, open the removable disk.
5
Drag or save les to your computer.
Playback/Editing
108
Using programs on a computer
i-Launcher allows you to play back les with Multimedia Viewer and provides links so that you can download useful programs.
5
Turn on the camera.
6
Install i-Launcher on the PC.
OSHow to Install
Windows
When the pop-up window prompts you to install i-Launcher,
select Yes .
•
If the pop-up window does not appear, select My Computer
→
i-Launcher→iLinker.exe.
•
If a pop-up window prompting you to run iLinker.exe appears,
run it rst.
•
When you connect the camera to a computer with i-Launcher
installed, the program will launch automatically.
Mac
Click Devices→i-Launcher →Mac→iLinker.
7
Follow the on-screen instructions to complete the installation.
Before installing the program, ensure that the PC is connected to a network.
Installing i-Launcher
1
Rotate the mode dial to
n
.
2
Select Connectivity→i-Launcher→On.
3
Turn o the camera.
4
Connect the camera to your computer with the USB cable.
You must plug the small end of the USB cable into your camera. If the cable is
reversed, it may damage your les. The manufacturer is not responsible for any
loss of data.
Using programs on a computer
Playback/Editing
109
Using i-Launcher
i-Launcher allows you to play back les with Multimedia Viewer and provides a link
to download the PC Auto Backup program.
•
The requirements on the following page are recommendations only. i-Launcher
may not work properly even when the computer meets the requirements,
depending on the condition of your computer.
•
If your computer does not meet the requirements, videos may not play correctly.
The manufacturer is not responsible for any damage that results from using
unqualied computers such as a computer you assembled yourself.
Available programs when using i-Launcher
OptionDescription
Multimedia Viewer
You can view les with Multimedia Viewer.
Firmware Upgrade
You can update the rmware of your camera.
PC Auto Backup
i-Launcher provides a link for downloading the PC
Auto Backup program when you connect the camera
to a computer. You can send photos or videos that you
captured with the camera to a PC wirelessly.
If you use a Mac OS computer, only Firmware Upgrade and PC Auto Backup are
available.
Using programs on a computer
Playback/Editing
110
Mac OS requirements
ItemRequirements
OS
Mac OS 10.5 or higher (except PowerPC)
RAM
Minimum 256 MB RAM (512 MB or more recommended)
Hard disk
capacity
Minimum 110 MB
Others
USB 2.0 port
Opening i-Launcher
On your computer, select Start→All Programs→Samsung→i-Launcher→
Samsung i-Launcher. On your Mac, click Applications→Samsung→i-Launcher.
Windows OS Requirements
ItemRequirements
CPU
Intel® Core™ 2 Duo 1.66 GHz or higher/
AMD Athlon X2 Dual-Core 2.2 GHz or higher
RAM
Minimum 512 MB RAM (1 GB or more recommended)
OS*
Windows XP SP2, Windows Vista, Windows 7, or Windows 8
Hard disk
capacity
250 MB or more (1 GB and above recommended)
Others
•
1024 X 768 pixels, 16-bit color display compatible monitor
(1280 X 1024 pixels, 32-bit color display recommended)
•
USB 2.0 port
•
nVIDIA Geforce 7600GT or higher/
ATI X1600 series or higher
•
Microsoft DirectX 9.0c or higher
* A 32-bit version of i-Launcher will be installed—even on 64-bit editions of Windows XP,
Windows Vista, Windows 7, and Windows 8.
Using programs on a computer
Playback/Editing
111
Using Multimedia Viewer
Multimedia Viewer allows you to play back les. On the Samsung i-Launcher screen, click Multimedia Viewer.
Files that have been recorded with other manufacturers’ devices may not play back smoothly.
Viewing photos
3
2
6790!854
1
No.Description
1
File name
2
Enlarged area
3
Histogram
4
Open the selected le.
5
Histogram button
6
Rotate to the left/Rotate to the right.
7
Move to the previous le/Move to the next le.
8
Fit the photo to the screen.
9
View the photo in its original size.
0
Zoom in/Zoom out
!
Switch between 2D and 3D mode.
Using programs on a computer
Playback/Editing
112
Viewing videos
1
685437
2
No.Description
1
File name
2
Adjust the volume.
3
Open the selected le.
4
Move to the next le.
5
Stop
6
Pause
7
Move to the previous le.
8
Progress bar
Using programs on a computer
Playback/Editing
113
Updating the rmware
On the Samsung i-Launcher screen, click Firmware Upgrade.
Downloading the PC Auto Backup program
On the Samsung i-Launcher screen, click PC Auto Backup. For information about
installing the PC Auto Backup program, refer to page 127.
Connecting to a WLAN and conguring
network settings
………………………………… 115
Connecting to a WLAN
………………………… 115
Using the login browser
……………………… 116
Network connection tips
……………………… 117
Entering text
…………………………………… 118
Using the NFC Feature (Tag & Go)
……………… 119
Using NFC features in Shooting mode
………… 119
Using NFC features in Playback mode
(Photo Beam)
…………………………………… 119
Using NFC features in Wi-Fi mode
……………… 119
Saving les to a smart phone automatically
… 120
Sending photos or videos to a smart phone
… 121
Using a smart phone as a remote shutter
release
…………………………………………… 123
Using the Baby Monitor
………………………… 125
Adjusting the noise level for alarm activation
… 126
Using Auto Backup to send photos or videos
… 127
Installing the program for Auto Backup on
your PC
………………………………………… 127
Sending photos or videos to a PC
……………… 127
Sending photos or videos via email
…………… 129
Changing email settings
……………………… 129
Sending photos or videos via email
…………… 131
Using photo or video sharing services
………… 132
Accessing a sharing service
…………………… 132
Uploading photos or videos
…………………… 132
Using Samsung Link to send les
……………… 134
Uploading photos to an online storage or
registered devices
……………………………… 134
Viewing photos or videos on devices that support
Samsung Link
…………………………………… 135
Wireless network
Learn how to connect to wireless local area networks (WLANs) and use functions.
Wireless network
115
Connecting to a WLAN and conguring network settings
Learn to connect via an access point (AP) when you are in a range of a WLAN. You can also congure network settings.
IconDescription
Ad hoc AP
Secured AP
WPS AP
Signal strength
Press [
t
] or touch to open AP setting options.
•
When you select a secured AP, a pop-up window appears. Enter the required
passwords to connect to the WLAN. For information about entering text, refer
to "Entering text". (p. 118)
•
When a login page appears, refer to "Using the login browser". (p. 116)
•
When you select an unsecured AP, the camera will automatically connect to
the WLAN.
•
If you select a WPS prole supported AP, select →WPS PIN connection,
and then enter a PIN on the AP device. You can also connect to a WPS prole
supported AP by selecting
→WPS button connection on the camera, and
then pushing the WPS button on the AP device.
•
If a pop-up message about data collection regulations appears, read and
agree to it.
Connecting to a WLAN
1
Rotate the mode dial to
w
.
2
Select , , , , or .
3
Follow the on-screen instructions until the Wi-Fi Setting screen
appears.
•
The camera automatically searches for available AP devices.
•
In some modes, press [
m
], and then select Wi-Fi Setting.
4
Select an AP.
Refresh
Back
•
Select Refresh to refresh the list of connectable APs.
•
Select Add wireless network to add an AP manually. The AP name must be
in English to add the AP manually.
Connecting to a WLAN and conguring network settings
Wireless network
116
Setting network options
1
In the Wi-Fi Setting screen, move to an AP, and then press
[
t
] or touch .
2
Select each option, and then enter the required information.
OptionDescription
Network Password
Enter the network password.
IP Setting
Set the IP address automatically or manually.
Manually setting the IP address
1
In the Wi-Fi Setting screen, move to an AP, and then press
[
t
] or touch .
2
Select IP Setting→Manual.
3
Select each option, and then enter the required information.
OptionDescription
IP
Enter the static IP address.
Subnet Mask
Enter the subnet mask.
Gateway
Enter the gateway.
DNS Server
Enter the DNS address.
Using the login browser
You can enter your login information in the browser when connecting to some APs,
sharing sites, or cloud servers.
Button/IconDescription
[
D
/
c
/
F
/
t
]
Move to an item or scroll the page.
[
o
]
Select an item.
/
Close the login browser.
Move to the previous page.
Move to the next page.
Stop loading the page.
Reload the page.
•
You may not be able to select some items depending on the page you connected
to. This does not indicate a malfunction.
•
The login browser may not close automatically after you log into some pages. If
this occurs, close the login browser by pressing [
b
] or touching or ,
and then proceed with the desired operation.
•
It may take longer to load the login page due to the page size or network speed.
If this occurs, wait until the login information input window appears.
Connecting to a WLAN and conguring network settings
Wireless network
117
Network connection tips
•
Some Wi-Fi features are not available if you do not insert a memory card.
•
The quality of the network connection will be determined by the AP.
•
The further the distance between your camera and the AP, the longer it will take
to connect to the network.
•
If a nearby device is using the same radio frequency signal as your camera, it may
interrupt your connection.
•
If your AP name is not in English, the camera may not be able to locate the device
or the name may appear incorrectly.
•
For network settings or a password, contact your network administrator or
network service provider.
•
If a WLAN requires authentication from the service provider, you may not be able
to connect to it. To connect to the WLAN, contact your network service provider.
•
Depending on the encryption type, the number of digits in the password may
dier.
•
A WLAN connection may not be possible in all surroundings.
•
The camera may display a WLAN enabled printer on the AP List. You cannot
connect to a network via a printer.
•
You cannot connect your camera to a network and a TV simultaneously.
•
Connecting to a network may incur additional charges. Costs will vary based on
the conditions of your contract.
•
If you cannot connect to a WLAN, try another AP from the available AP list.
•
A login page may appear when you select free WLANs provided by some
network service providers. Enter your ID and password to connect to the WLAN.
For information about registering or the service, contact the network service
providers.
•
Be cautious when you enter personal information for an AP connection. Do not
enter any payment or credit card information on your camera. The manufacturer
is not liable for any problem caused by entering such information.
•
Available network connections may dier by country.
•
The WLAN feature of your camera must comply with radio transmission laws in
your region. To ensure compliance, use the WLAN feature only in the country
where you purchased the camera.
•
The process for adjusting network settings may dier, depending on network
conditions.
•
Do not access a network that you are not authorized to use.
•
Before you connect to a network, ensure your battery is fully charged.
•
You cannot upload or send les captured in some modes.
•
Files that you transfer to another device may not be supported by the device. In
this case, use a computer to play back the les.
Connecting to a WLAN and conguring network settings
Wireless network
118
Entering text
Learn how to enter text. The icons in the table below let you move the cursor,
change the case, etc. Press [
D
/
c
/
F
/
t
] to move to a desired key, and then press
[
o
] to enter the key. You can also touch a key to enter it.
X
CancelDone
X
Canc
el
Done
IconDescription
Move the cursor.
In ABC mode, change the case.
X
Delete the last letter.
Cancel
Stop entering text and return to the previous page.
IconDescription
Switch between Symbol mode and ABC mode.
Enter a space.
Done
Save the displayed text.
•
You can use only the English alphabets in some modes, regardless of the display
language.
•
To move to Done directly, press [
P
].
•
You can enter up to 64 characters.
•
The screen may dier depending on the input mode.
Wireless network
119
Using the NFC Feature (Tag & Go)
Place a smart phone's NFC antenna near the camera’s NFC tag to launch the feature for saving photos to a smart phone automatically or the feature for using a smart phone as a
remote shutter. You can also transfer les to an NFC-enabled device in Playback mode.
•
This feature is supported by NFC-enabled smart phones running Android OS. It is recommended that you use the latest version. This feature is not available for iOS devices.
•
You should install Samsung SMART CAMERA App on your phone or device before using this feature. You can download the application from Samsung Apps or the Google Play Store.
Samsung SMART CAMERA App is compatible with Samsung camera models manufactured in 2013 or later.
•
To read an NFC tag, place the NFC-enabled device near the camera’s NFC tag for more than 2 seconds.
Using NFC features in Wi-Fi mode
Select MobileLink or Remote Viewnder from the pop-up window that appears by
reading a tag from an NFC-enabled device. (p. 121, 123)
Using NFC features in Shooting mode
Launch AutoShare or Remote Viewnder by reading a tag from an NFC-enabled
device. (p. 120, 123)
Preset to launch the Wi-Fi function by reading a tag on an NFC-enabled device.
(p. 142)
Using NFC features in Playback mode(Photo Beam)
In Playback mode, the camera transfers the current le to the smart phone
automatically when you read a tag from an NFC-enabled device.
•
To transfer multiple les, select les from the thumbnail view, and then read a tag
from an NFC-enabled device.
Wireless network
120
Saving les to a smart phone automatically
The camera connects to a smart phone that supports the AutoShare feature via a WLAN. When you capture a photo with your camera, the photo is saved to the smart phone
automatically.
•
The AutoShare feature is supported by smart phones or tablets running Android OS or iOS. Some features may not be supported by some models. Before using this feature, update
the device’s rmware to the latest version. If the rmware version is not the most recent, this function may not perform properly.
•
You should install Samsung SMART CAMERA App on your phone or device before using this feature. You can download the application from Samsung Apps, the Google Play Store, or
the Apple App Store. Samsung SMART CAMERA App is compatible with Samsung camera models manufactured in 2013 or later.
•
This feature is not available with the internal memory in some Shooting modes.
•
If you set this function, the setting is maintained even when you change the Shooting mode.
•
This feature may not be supported in some modes.
5
On the camera, allow the smart phone to connect to your camera.
•
If the smart phone has been connected to your camera before, it is connected
automatically.
•
An icon that shows the connection status () will appear on the camera’s
screen.
6
On the camera, capture a photo.
•
The captured photo is saved to the camera, and then transferred to the smart
phone.
•
If you recorded a video, it is saved only to the camera.
•
A GIF le captured in Motion Photo mode is not saved on the smart phone.
•
The image le captured while recording a video is not saved on the smart
phone.
•
If the GPS feature is activated on the smart phone, the GPS information will
be saved with the captured photo.
1
On the camera, in Shooting mode, press [
m
].
2
On the camera, select AutoShare→On.
•
If the pop-up message that prompts you to download the application
appears, select Next.
3
On the smart phone, turn on Samsung SMART CAMERA App.
•
For iOS devices, turn on the Wi-Fi feature before turning on the application.
•
To start the application automatically on an NFC-enabled smart phone, turn
on the function and place the smart phone near the NFC tag (p. 22) on the
camera.
4
Select the camera from the list and connect the smart phone to the
camera.
•
The smart phone can connect to only one camera at a time.
Wireless network
121
Sending photos or videos to a smart phone
The camera connects to a smart phone that supports the MobileLink feature via a WLAN. You can easily send photos or videos to your smart phone.
•
The MobileLink feature is supported by smart phones or tablets running Android OS or iOS. Some features may not be supported by some models. Before using this feature, update
the device’s rmware to the latest version. If the rmware version is not the most recent, this function may not perform properly.
•
You should install Samsung SMART CAMERA App on your phone or device before using this feature. You can download the application from Samsung Apps, the Google Play Store, or
the Apple App Store. Samsung SMART CAMERA App is compatible with Samsung camera models manufactured in 2013 or later.
•
When there are no les in the camera memory, you cannot use this feature.
•
If you select les from the smart phone, you can view up to 1,000 recent les and send up to 1,000 les at a time. If you select les from the camera, you can view les that were
selected from the camera. The maximum number of les you can send varies depending on the storage space of the smart phone.
•
When you send Full HD videos using MobileLink feature, you may not be able to play back les on some devices.
•
When using this feature on an iOS device, the device may lose its Wi-Fi connection.
4
On the smart phone, turn on Samsung SMART CAMERA App.
•
For iOS devices, turn on the Wi-Fi feature before turning on the application.
•
To start the application automatically on an NFC-enabled smart phone, turn
on the function and place the smart phone near the NFC tag (p. 22) on the
camera.
5
Select the camera from the list and connect the smart phone to the
camera.
•
The smart phone can connect to only one camera at a time.
1
On the camera, rotate the mode dial to
w
.
2
On the camera, select .
•
If the pop-up message that prompts you to download the application
appears, select Next.
3
On the camera, select a sending option.
•
If you select Select Files from Smartphone, you can use your smart phone
to view and share les stored on the camera. The screen turns o if you
perform no operations on the smart phone for 30 seconds.
•
If you select Select Files from Camera (Connect to one smartphone),
you can select les to send from the camera.
•
If you select Select Files from Camera (Connect to multiple smartphones),
you can connect to up to 4 smart phones, and then select les to send from
the camera. Transferring les to multiple smart phones may take longer than
transferring les to one device.
Sending photos or videos to a smart phone
Wireless network
122
6
On the camera, allow the smart phone to connect to your camera.
•
If the smart phone has been connected to your camera before, it is connected
automatically.
•
If you select Select Files from Camera (Connect to multiple smartphones),
touch Connect next to the smart phone listed on the camera.
7
To connect to multiple smart phones, repeat steps 4, 5 and 6, and
then touch Next.
8
On the smart phone or camera, select les to transfer from the
camera.
9
On the smart phone, touch the copy button or on the camera, select
Send.
•
The camera will send the les.
•
When you connect to multiple smart phones, the camera will send the les to
all devices at the same time.
Wireless network
123
1
On the camera, rotate the mode dial to
w
.
2
On the camera, select .
•
If the pop-up message that prompts you to download the application
appears, select Next.
3
On the smart phone, turn on Samsung SMART CAMERA App.
•
For iOS devices, turn on the Wi-Fi feature before turning on the application.
•
To start the application automatically on an NFC-enabled smart phone, turn
on the function and place the smart phone near the NFC tag (p. 22) on the
camera.
4
Select the camera from the list and connect the smart phone to the
camera.
•
The smart phone can connect to only one camera at a time.
5
On the camera, allow the smart phone to connect to your camera.
•
If the smart phone has been connected to your camera before, it is connected
automatically.
6
On the smart phone, set the following shooting options.
IconDescription
Flash option
Timer option
Photo size
Saving location
Zoom ratio
•
While using this feature, some buttons are not available on your camera.
•
The zoom button and the shutter button on your smart phone will not
function when using this feature.
•
Remote Viewnder mode supports the and photo sizes only.
Using a smart phone as a remote shutter release
The camera connects to a smart phone that supports the Remote Viewnder feature via a WLAN. Use the smart phone as a remote shutter release with the Remote Viewnder
feature. The captured photo will display on the smart phone.
•
The Remote Viewnder feature is supported by smart phones or tablets running Android OS or iOS. Some features may not be supported by some models. Before using this feature,
update the device’s rmware to the latest version. If the rmware version is not the most recent, this function may not perform properly.
•
You should install Samsung SMART CAMERA App on your phone or device before using this feature. You can download the application from Samsung Apps, the Google Play Store, or
the Apple App Store. Samsung SMART CAMERA App is compatible with Samsung camera models manufactured in 2013 or later.
Using a smart phone as a remote shutter release
Wireless network
124
7
On the smart phone, touch and hold to focus.
•
The focus is automatically set to Multi AF.
8
Release to capture the photo.
•
The photo will be stored on the smart phone in its original size.
•
If the GPS feature is activated on the smart phone, the GPS information will
be saved with the captured photo.
•
When you use this feature, the ideal distance between the camera and the smart
phone may vary, depending on your surroundings.
•
We recommend you keep the distance between the smart phone and the
camera within 23 feet (7 m) when you use this feature.
•
It will take some time to capture the photo after you release on the smart
phone.
•
The Remote Viewnder function will deactivate when:
-
there is an incoming call on the smart phone
-
either the camera or the smart phone turns o
-
the memory is full
-
either device loses its connection to the WLAN
-
the Wi-Fi connection is poor or unstable
-
you perform no operations for approximately 3 minutes while connected
Wireless network
125
Using the Baby Monitor
Use the Baby Monitor feature to connect the camera to a smart phone and monitor a location.
•
The Baby Monitor feature is supported by smart phones that support WVGA (800 X 480) or higher resolution and run the Android OS or iOS. Some features may not be supported by
some models. Before using this feature, update the device’s rmware to the latest version. If the rmware version is not the most recent, this function may not perform properly.
•
You should install the Samsung Home Monitor application on your smart phone before using this feature. You can download the application from Samsung Apps, the Google Play
Store, or the Apple App Store.
•
Use this feature indoors only.
6
Start live video or sound monitoring.
•
Watch live video from the camera on your smart phone. During video
monitoring, touch the Sound Monitoring Mode button on the smart phone
to stop the video stream. If the camera detects noise, an alarm will notify you
on the smart phone.
•
During live video monitoring via the smart phone, video is not saved on the
camera.
•
If the monitored location is dark, touch to turn on the AF-assist light.
•
During sound monitoring, alarms will sound on the smart phone if the
camera detects noise for a short period at a volume that is higher than the
designated level.
•
During live video monitoring, alarms will not sound on the smart phone
even if the camera detects noise.
7
Touch to exit the Samsung Home Monitor application.
1
On the camera, rotate the mode dial to
w
.
2
On the camera, select .
•
If the pop-up message that prompts you to download the application
appears, select Next.
3
On the camera, select an AP from the list, and then position the
camera.
•
Place the camera in a safe location where children or pets cannot reach it.
•
Point the camera lens at the subject.
•
We recommend you connect the camera to a power outlet with the AC
adapter.
4
On the smart phone, select the AP that the camera is connected to.
•
For iOS devices, turn on the Wi-Fi feature before turning on the application.
5
On the smart phone, turn on the Samsung Home Monitor
application.
Using the Baby Monitor
Wireless network
126
Adjusting the noise level for alarm activation
You can set the level of noise that will activate an alarm while using sound
monitoring. Press [
D
/
c
] to adjust the noise level.
Noise level for alarm
activation:
When the camera
detects noise
that exceeds the
designated level for a
short period, an alarm
will sound.
▲▼:
Sensor sensitivity
Do not use this feature for illegal purposes.
Wireless network
127
Using Auto Backup to send photos or videos
You can send photos or videos that you captured with the camera to a PC wirelessly.
Sending photos or videos to a PC
1
Rotate the mode dial to
w
.
2
Select .
•
If the pop-up message that prompts you to download the application
appears, select Next.
•
The camera will automatically attempt to connect to a WLAN via the most
recently connected AP device.
•
If the camera has not previously been connected to a WLAN, it will search for
available AP devices. (p. 115)
Installing the program for Auto Backup on your PC
1
Install i-Launcher on the PC. (p. 108)
2
Connect the camera to the PC with the USB cable.
3
When the Auto Backup program icon appears, click it.
•
The Auto Backup program is installed on the PC. Follow the on-screen
instructions to complete the installation.
4
Remove the USB cable.
Before installing the program, ensure that the PC is connected to a network.
Using Auto Backup to send photos or videos
Wireless network
128
3
Select a backup PC.
4
Select OK.
•
To cancel sending, select Cancel.
•
You cannot select individual les to back up. This function backs up only new
les on the camera.
•
The backup's progress will be shown on both the PC monitor and the camera
screen.
•
When the transfer is completed, the camera will turn o automatically in
approximately 30 seconds. Select Cancel to return to the previous screen and
prevent the camera from turning o automatically.
•
To turn o your PC automatically after the transfer is complete, select
Shut down PC after backup.
•
To change the backup PC, select .
•
When you connect the camera to the WLAN, select the AP that is connected to
the PC.
•
The camera will search for available access points even if you are connecting to
the same access point again.
•
If you turn o the camera or remove the battery while sending les, the le
transfer will be interrupted.
•
While you are using this feature, the shutter control is disabled on your camera.
•
You can connect only one camera to the PC at a time for sending les.
•
The backup may be canceled due to network conditions.
•
When there are no les in the camera memory, you cannot use this feature.
•
You must turn o Windows Firewall and any other rewalls before using this
feature.
•
You can send up to 1,000 recent les.
•
On the PC software, the server name must be entered in the Latin alphabet and
can contain no more than 48 characters.
•
When multiple le types are created at once, only the image les (JPG) will be
sent to the PC with this feature.
Wireless network
129
Changing email settings
In the email menu, you can change settings for storing your information. You can
also set or change the email password. For information about entering text, refer to
"Entering text". (p. 118)
Storing your information
1
Rotate the mode dial to
w
.
2
Select .
3
Press [
m
].
4
Select Sender Setting.
5
Select the Name box, enter your name, and then select Done.
Sender Setting
Name
Email
SaveReset
6
Select the Email box, enter your email address, and then select
Done.
7
Select Save to save your changes.
•
To delete your information, select Reset.
Sending photos or videos via email
You can change settings in the email menu and send photos or videos stored on the camera via email.
Sending photos or videos via email
Wireless network
130
Setting an email password
1
Rotate the mode dial to
w
.
2
Select .
3
Press [
m
].
4
Select Setting Password→On.
•
To deactivate the password, select O.
5
When the pop-up appears, select OK.
•
The pop-up disappears automatically even if you do not select OK.
6
Enter a 4-digit password.
7
Enter the password again.
8
When the pop-up appears, select OK.
If you forget your password, you can reset it by selecting
Reset
on the password
setting screen. When you reset the information, the previously saved user’s setting
information, email address, and recently sent email list will be deleted.
Changing the email password
1
Rotate the mode dial to
w
.
2
Select .
3
Press [
m
].
4
Select Change Password.
5
Enter your current 4-digit password.
6
Enter a new 4-digit password.
7
Enter the new password again.
8
When the pop-up appears, select OK.
Sending photos or videos via email
Wireless network
131
Sending photos or videos via email
You can send photos or videos stored on the camera via email. For information
about entering text, refer to "Entering text". (p. 118)
1
Rotate the mode dial to
w
.
2
Select .
3
Connect to a WLAN. (p. 115)
4
Select the Sender box, enter your email address, and then select
Done.
•
If you have previously saved your information, it will be inserted
automatically. (p. 129)
•
To use an address from the list of previous senders, select → an address.
5
Select the Receiver box, enter an email address, and then select
Done.
•
To use an address from the list of previous recipients, select → an address.
•
Select to add additional recipients. You can input up to 30 recipients.
•
Select to delete an address from the list.
6
Select Next.
7
Select les to send.
•
You can select up to 20 les. The total size must be 7 MB or less.
8
Select Next.
9
Select the comment box, enter your comments, and then select
Done.
10
Select Send.
•
The camera will send the email.
•
If an email fails to send, a message prompting you to send it again appears.
•
Even if a photo appears to have transferred successfully, errors with the
recipient’s email account may cause the photo to be rejected or recognized as
spam.
•
You may not be able to send an email if no network connection is available or if
your email account settings are incorrect.
•
You cannot send an email if the combined le sizes exceed the 7MB.
The maximum resolution of photos you can send is 2M. The maximum resolution
of videos you can send is
. If the selected photo has a resolution higher than
2M, it will be automatically resized to a lower resolution.
•
If you cannot send an email because of rewall or user authentication settings,
contact your network administrator or network service provider.
•
When there are no les in the camera memory, you cannot use this feature.
•
You can also send an email in Playback mode by pressing [
m
], and then
selecting Share(Wi-Fi)→Email or by selecting
→Email.
Wireless network
132
Accessing a sharing service
1
Rotate the mode dial to
w
.
2
Select .
3
Connect to a WLAN. (p. 115)
4
Select a sharing service.
•
If the pop-up message that prompts you to create an account appears, select
OK.
5
Enter your ID and password to log in.
•
For information about entering text, refer to "Entering text". (p. 118)
•
To select an ID from the list, select → an ID.
•
If you have previously logged in to the sharing service, you may be logged in
automatically.
You must have an existing account with the le sharing service to use this feature.
Uploading photos or videos
1
Access the sharing service with your camera.
2
Select les to upload.
•
You can select up to 20 les. The total size must be 10 MB or less. (On some
sharing services, the total size or number of les may vary.)
3
Select Upload.
•
The camera will upload photos or videos.
•
When an upload fails, a message prompting you to upload it again appears.
•
On some sharing services, you can enter your comments by selecting the
comment box. For information about entering text, refer to "Entering text".
(p. 118)
Using photo or video sharing services
Upload your photos or videos to le sharing services. Available sharing services will be displayed on your camera. To upload les to some websites, you must visit the website
and register before connecting your camera.
Using photo or video sharing services
Wireless network
133
•
You can set an upload folder for Facebook by pressing [
m
], and then
selecting Upload Folder (Facebook) on the sharing service's list screen.
•
You cannot upload les if the le size exceeds the limit. The maximum resolution
of photos you can upload is 2M. The maximum resolution of videos you can
upload is
. If the selected photo has a resolution higher than 2M, it will be
automatically resized to a lower resolution. (On some sharing services, the
maximum photo resolution may vary.)
•
The method of uploading photos or videos may dier depending on the
selected sharing service.
•
If you cannot access a sharing service because of rewall or user authentication
settings, contact your network administrator or network service provider.
•
Uploaded photos or videos may be automatically titled with the date they were
captured.
•
The speed of your internet connection may aect how quickly photos upload or
web pages open.
•
When there are no les in the camera memory, you cannot use this feature.
•
You can also upload photos or videos to le sharing services in Playback mode
by pressing [
m
], and then selecting Share(Wi-Fi)→ a sharing service or by
selecting
→
a sharing service.
•
You cannot upload videos to some sharing services.
Wireless network
134
Using Samsung Link to send les
You can upload les from your camera to the Samsung Link online storage or to registered devices, or view les on a Samsung Link device connected to the same AP.
3
Enter your ID and password, and then select Login→OK.
•
For information about entering text, refer to "Entering text". (p. 118)
•
To select an ID from the list, select → an ID.
•
If you have previously logged in to the website, you may be logged in
automatically.
To use this feature, you must create a Samsung Link account and an account
with an aliated online storage service using your PC. After you have nished
creating the accounts, add your online storage account to Samsung Link.
4
Select online storage or a registered device.
•
Before you use this feature, you must visit the Samsung Link website with
your PC and register an online storage or device.
5
Select les to upload, and then select Upload.
•
You cannot upload video les to Samsung Link online storage.
•
When there are no les in the camera memory, you cannot use this feature.
•
You can upload up to 20 les.
•
You can also upload photos in Playback mode by pressing [
m
], and then
selecting Share(Wi-Fi)→Samsung Link or by selecting
→Samsung Link.
Uploading photos to an online storage or registered devices
1
Rotate the mode dial to
w
.
2
Select →Web storage.
•
If the guide message appears, select OK.
•
The camera will automatically attempt to connect to a WLAN via the most
recently connected AP device.
•
If the camera has not previously been connected to a WLAN, it will search for
available AP devices. (p. 115)
•
To change the size for uploaded photos, press [
m
], and then select
Upload Image Size.
Using Samsung Link to send les
Wireless network
135
Viewing photos or videos on devices that support Samsung
Link
1
Rotate the mode dial to
w
.
2
Select →Nearby devices.
•
If the guide message appears, select OK.
•
The camera will automatically attempt to connect to a WLAN via the most
recently connected AP device.
•
If the camera has not previously been connected to a WLAN, it will search for
available AP devices. (p. 115)
•
You can set to allow only selected devices or all devices to connect by
pressing [
m
], and then selecting DLNA Access Control on the screen.
•
A sharing le list is created. Wait until other devices can nd your camera.
3
Connect the Samsung Link device to a network, and then turn on
the Samsung Link feature.
•
Refer to your device's user manual for more information.
4
On the camera, allow the Samsung Link device to connect to your
camera.
5
On the Samsung Link device, select a camera to connect to.
6
On the Samsung Link device, browse the shared photos or videos.
•
For information about searching for the camera and browsing the photos or
videos on the Samsung Link device, refer to the device's user manual.
•
Videos may not play smoothly depending on the type of Samsung Link
device or the network condition. If this happens, re-record the video in
640 X 480 or smaller quality and play it again. If videos do not play smoothly
on your device over the wireless connection, try connecting the camera to
the device with an A/V cable.
AP
Ÿ
The camera is connected to a TV that supports Samsung Link via WLAN.
Using Samsung Link to send les
Wireless network
136
•
Depending on the number of photos or videos you want to share, it may take
some time to load your photos or videos and complete the initial set-up process.
•
While viewing photos or videos on the Samsung Link device, continuously using
the device's remote or performing additional operations on the device may
prevent this feature from working properly.
•
If you reorder or sort les on the camera while viewing them on a Samsung Link
device, you must repeat the initial set-up process to update the list of les on the
device.
•
When there are no les in the camera memory, you cannot use this feature.
•
We recommend you use a network cable to connect your Samsung Link device
to your AP. This will minimize any video ‘Stuttering’ you may experience when
streaming content.
•
To view les on a Samsung Link device using the Nearby devices feature, enable
multicast mode on your AP.
•
You can share up to 1,000 recent les.
•
On a Samsung Link device, you can view only photos or videos captured with
your camera.
•
The range of the wireless connection between your camera and a Samsung Link
device may vary depending on the specications of the AP.
•
If the camera is connected to 2 Samsung Link devices, playback may be slower.
•
Photos or videos will be shared in their original sizes.
•
You can use this feature only with devices that support Samsung Link.
•
Shared photos or videos will not be stored on the Samsung Link device, but they
can be stored in the camera to meet the device's specications.
•
Transferring photos or videos to the Samsung Link device may take some time
depending on the network connection, the number of les to be shared, or the
sizes of the les.
•
If you power o the camera abnormally while viewing photos or videos on
a Samsung Link device (for example, by removing the battery), the device
considers the camera to still be connected.
•
The order of photos or videos on the camera may be dierent than on the
Samsung Link device.
Settings menu
…………………………………………………… 138
Accessing the settings menu
……………………………… 138
Sound
………………………………………………………… 139
Display
……………………………………………………… 139
Connectivity
………………………………………………… 140
General
……………………………………………………… 141
Settings
Refer to options to congure your camera’s settings.
Settings
138
Settings menu
Learn to congure your camera's settings.
3
Select an item.
BackSelect
Medium
On
Sound 1
On
Sound
Volume
Beep Sound
Shutter Sound
AF Sound
4
Select an option.
BackSet
Volume
O
Low
Medium
High
5
Press [
b
] to return to the previous screen.
Accessing the settings menu
1
Rotate the mode dial to
n
.
2
Select a menu.
Sound
Display
Connectivity
General
Settings
OptionDescription
Sound
Set various camera sounds and the volume. (p. 139)
Display
Customize the display settings. (p. 139)
Connectivity
Set the connection options. (p. 140)
General
Change the settings for the camera system such as memory
format and default le name. (p. 141)
Settings menu
Settings
139
Sound
* Default
ItemDescription
Volume
Set the volume of all sounds. (O, Low, Medium*, High)
Beep Sound
Set the sound the camera emits when you press the buttons,
switch modes, or touch the screen on or o. (O, On*)
Shutter
Sound
Set the sound the camera emits when you press the shutter
button. (O, Sound 1*, Sound 2, Sound 3)
AF Sound
Set the sound the camera emits when you half-press the shutter
button on or o. (O, On*)
Display
* Default
ItemDescription
Start Image
Set a start image to display when the camera turns on.
•
O*: Display no start image.
•
Logo: Display a default image stored in the internal memory.
Guide Line
Select a guide to help you compose a scene.
(O*, 3 X 3, 2 X 2, Cross, Diagonal)
Date/Time
Display
Set whether or not to display the date and time on the camera's
display. (O*, On)
Help Guide
Display
Display a brief description of an option or menu.
•
Mode Help Guide (O, On*)
•
Function Help Guide (O, On*)
Settings menu
Settings
140
* Default
ItemDescription
Brightness
Adjust the brightness of the screen.
(Auto*, Dark, Normal, Bright)
Normal is xed in Playback mode even if you have selected
Auto.
Quick View
Set whether or not to review a captured image before returning
to the Shooting mode. (O, On*)
This feature does not work in some modes.
Power Save
If you perform no operations for 30 seconds, the camera
automatically switches to Power save mode. (O*, On)
In Power save mode, press any button other than [
X
] to resume
using the camera.
Connectivity
* Default
ItemDescription
Video Out
Set the video signal output for your region.
•
NTSC: USA, Canada, Japan, Korea, Taiwan, Mexico, etc
•
PAL (supports only BDGHI): Australia, Austria, Belgium, China,
Denmark, England, Finland, France, Germany, Italy, Kuwait,
Malaysia, Netherlands, New Zealand, Norway, Singapore, Spain,
Sweden, Switzerland, Thailand, etc
i-Launcher
Set i-Launcher to launch automatically when you connect your
camera to your computer. (O, On*)
Settings menu
Settings
141
General
* Default
ItemDescription
Network
I
nformation
View the Mac address and network certication number of
your camera.
Language
Set a language for the display text.
Time Zone
Set the time zone for your location. When you travel to
another country, select Visit, and then select the appropriate
time zone. (Home*, Visit)
Date/Time Set
Set the date and time.
Date Type
Set a date format. (YYYY/MM/DD, MM/DD/YYYY,
DD/MM/YYYY)
The default date type may dier depending on the
language selected.
Time Type
Set the time format. (12 Hr, 24 Hr)
The default time type may dier depending on the
language selected.
* Default
ItemDescription
File No.
Specify how to name les.
•
Reset: Set the le number to start from 0001 when you
insert a new memory card, format a memory card, or
delete all les.
•
Series*: Set the le number to resume from the previous
le number when you insert a new memory card, format a
memory card, or delete all les.
•
The default name of the rst folder is 100PHOTO and the
default name of the rst le is SAM_0001.
•
The le number increases by one, from SAM_0001 to
SAM_9999, each time you capture a photo or record a
video.
•
The folder number increases by one, from 100PHOTO to
999PHOTO, each time a folder is full.
•
The maximum number of les that can be stored in one
folder is 9,999.
•
The camera denes le names according to the Design
rule for Camera File system (DCF) standard. If you
intentionally change le names, the camera may not play
back the les.
Settings menu
Settings
142
* Default
ItemDescription
Imprint
Set whether or not to display the date and time on captured
photos. (O*, Date, Date & Time)
•
The date and time will be displayed on the bottom right
corner of the photo.
•
Some printer models may not print the date and time
properly.
•
The photo will not display the date and time if:
-
you select
i
Best Face mode
-
you select Panorama in
s
Smart mode
-
you select My Magic Frame, Motion Photo or
Eect Artist in
g
Magic Plus mode
Auto Power O
Set the camera to turn o automatically when you perform
no operations for a specied period.
(O, 1 min, 3 min*, 5 min, 10 min)
•
Your settings will not change when you replace the
battery.
•
The camera will not turn o automatically when the
camera is connected to a computer or WLAN or when you
are playing a slide show or videos.
* Default
ItemDescription
DIRECT LINK (Wi-Fi
Butt
on)
Set the Wi-Fi function to launch by pressing [DIRECT LINK].
(AutoShare*, MobileLink, Remote Viewnder,
Baby Monitor, Auto Backup, Email, SNS & Cloud,
Samsung Link)
Live view NFC
Set a Wi-Fi function to launch by reading a tag from an
NFC-enabled device in Shooting mode. (AutoShare,
Remote Viewnder*)
AF Lamp
Set a light to turn on automatically in dark places to help you
focus. (O, On*)
Format
Format the memory. Formatting will delete all les, including
protected les. (Ye s , No*)
Errors can occur if you use a memory card formatted by
another brand of camera, a memory card reader, or a
computer. Please format memory cards in the camera
before using them to capture photos.
Reset
Reset menus and shooting options. Date, time, language,
and video output settings will not be reset. (Ye s, No*)
Open Source
License
View open source licenses.
Error messages
…………………………………………………… 144
Camera maintenance
…………………………………………… 145
Cleaning your camera
……………………………………… 145
Using or storing the camera
………………………………… 146
About memory cards
………………………………………… 147
About the battery
…………………………………………… 150
Before contacting a service center
…………………………… 154
Camera specications
…………………………………………… 157
Glossary
………………………………………………………… 161
Index
……………………………………………………………… 166
Appendixes
Get information about error messages, specications, and maintenance.
Appendixes
144
Error messages
When the following error messages appear, try these remedies.
Error messageSuggested remedies
File system not
suppor
ted.
Your camera does not support the FAT le structure of
the inserted memory card. Format the memory card on
the camera.
Initialization failed.
The camera has failed to locate a device that supports
Samsung Link. Turn on devices on the network that
support Samsung Link.
Low Battery
Insert a charged battery or recharge the battery.
Memory Full
Delete unnecessary les or insert a new memory card.
No Image File
Capture photos or insert a memory card that contains
some photos.
Password Incorrect
The password for transferring les to another camera is
wrong. Enter the correct password.
Photo transfer failed.
Network connection disconnected while transferring
photos. Try restarting the Samsung Link feature.
Transfer failed.
•
The camera has failed to send a photo to the other
camera. Try sending again.
•
The camera has failed to send an email or transfer a
photo to a device that supports Samsung Link. Check
the network connection and try again.
Error messageSuggested remedies
Cannot read le
co
ntent
Delete the damaged le or contact a service center.
Card Error
•
Turn o the camera, and then turn it on again.
•
Remove the memory card, and then insert it again.
•
Format the memory card.
Card not supported.
The inserted memory card is not supported by your
camera. Insert a microSD, microSDHC, or microSDXC
memory card.
Connection failed.
•
The camera cannot connect to the network using the
selected access point. Select another AP and try again.
•
The camera has failed to connect to the other devices.
Try connecting again.
DCF Full Error
File names do not match the DCF standard. Transfer the
les from the memory card to your computer and format
the card. Then, open the Settings menu and select
File No.→Reset. (p. 141)
Device disconnected.
Network connection disconnected while transferring
photos. Reselect a device that supports Samsung Link.
Appendixes
145
Camera maintenance
Camera body
Wipe gently with a soft, dry cloth.
•
Never use benzene, thinners, or alcohol to clean the device. These solutions can
damage the camera or cause it to malfunction.
•
Do not press on or use a blower brush on the lens cover. This can damage the
camera.
Cleaning your camera
Camera lens and display
Use a blower brush to remove dust and wipe the lens gently with a soft cloth. If any
dust remains, apply lens cleaning liquid to a piece of lens cleaning paper and wipe
gently.
Camera maintenance
Appendixes
146
Using or storing the camera
Inappropriate places to use or store the camera
•
Avoid exposing the camera to very cold or very hot temperatures.
•
Avoid using your camera in areas with extremely high humidity, or where the
humidity changes drastically.
•
Avoid exposing the camera to direct sunlight and storing it in hot, poorly
ventilated areas, such as in a car during summer time.
•
Protect your camera and the display from impact, rough handling, and excessive
vibration to avoid serious damage.
•
Avoid using or storing your camera in dusty, dirty, humid, or poorly ventilated
areas to prevent damage to moving parts and internal components.
•
Do not use your camera near fuels, combustibles, or ammable chemicals. Do
not store or carry ammable liquids, gases, or explosive materials in the same
compartment as the camera or its accessories.
•
Do not store the camera where there are mothballs.
Using on beaches or shores
•
Protect your camera from sand and dirt when you use it on beaches or in similar
areas.
•
Your camera is not waterproof. Do not handle the battery, adapter, or memory
card with wet hands. Operating the camera with wet hands may cause damage to
your camera.
Storing for extended period of time
•
When you store the camera for an extended period, place it in a sealed container
with an absorbent material, such as silica gel.
•
Over time, unused batteries will discharge and must be recharged before use.
•
You must reset the date and time when you turn the camera on after the camera
and battery have been separated for a prolonged period.
Using the camera with caution in humid environments
When you transfer the camera from a cold environment to a warm one,
condensation can form on the lens or internal components of the camera. In this
situation, turn o the camera and wait for at least 1 hour. If condensation forms
on the memory card, remove the memory card from the camera and wait until all
moisture has evaporated before reinserting it.
Other cautions
•
Do not swing your camera by the strap. This may cause injury to yourself or others
or damage to your camera.
•
Do not paint your camera, as paint can clog moving parts and prevent proper
operation.
•
Turn o the camera when not using it.
Camera maintenance
Appendixes
147
•
Your camera contains delicate parts. Avoid impacts to the camera.
•
Protect the display from external force by keeping it in the case when not in
use. Protect the camera from scratches by keeping it away from sand, sharp
implements, or loose change.
•
Do not use the camera if the screen is cracked or broken. Broken glass or acrylic
could cause injury to your hands and face. Take the camera to a Samsung service
center to have it repaired.
•
Never place cameras, batteries, chargers, or accessories near, on, or in heating
devices, such as microwave ovens, stoves, or radiators. Heat can deform or
overheat these devices, which can cause a re or explosion.
•
Do not expose the lens to direct sunlight, as this may discolor the image sensor or
cause it to malfunction.
•
Protect the lens from ngerprints and scratches. Clean the lens with a soft, clean,
debris-free lens cloth.
•
The camera may turn o if struck or dropped. This is to protect the memory card.
Turn on the camera to use it again.
•
While you use the camera, it may heat up. This is normal and should not aect
your camera’s lifespan or performance.
•
When you use the camera in low temperatures, it may take some time to turn on,
the color of the display may be changed temporarily, or after-images may appear.
These conditions are not malfunctions and they will correct themselves when the
camera is returned to milder temperatures.
•
Paint or metal on the outside of the camera may cause allergies, itchy skin,
eczema, or swelling for people with sensitive skin. If you experience any of these
symptoms, stop using the camera immediately and consult a doctor.
•
Do not insert foreign objects into any of your camera’s compartments, slots, or
access points. Damage due to improper use may not be covered by your warranty.
•
Do not allow unqualied personnel to service the camera or attempt to service
the camera yourself. Any damage that results from unqualied service is not
covered by your warranty.
About memory cards
Supported memory cards
Your camera supports microSD (Secure Digital), microSDHC (Secure Digital High
Capacity), or microSDXC (Secure Digital eXtended Capacity) memory cards.
Memory card
Memory card adapter
To read data with a PC or memory card reader, insert the memory card into a
memory card adapter.
Camera maintenance
Appendixes
148
Memory card capacity
The memory capacity may dier depending on the scenes you shoot or shooting
conditions. These capacities are based on a 2 GB microSD card:
Photo
SizeSuper FineFineNormal
219432640
245483715
288567836
341669984
4188171,196
6381,2281,777
1,0061,8972,692
1,3292,4613,437
2,5084,3595,780
Video
Size30 fps
1920 X 1080
Approx. 18' 03"
1280 X 720
Approx. 25' 53"
640 X 480
Approx. 46' 12"
For Sharing
Approx. 257' 31"
The gures above are measured without using the zoom function. Available recording time
may vary if you use the zoom. Several videos were recorded in succession to determine the
total recording time.
Camera maintenance
Appendixes
149
Cautions when using memory cards
•
Avoid exposing memory cards to very cold or very hot temperatures (below
0 °C/32 °F or above 40 °C/104 °F). Extreme temperatures can cause memory cards
to malfunction.
•
Insert a memory card in the correct direction. Inserting a memory card in the
wrong direction may damage your camera and memory card.
•
Do not use memory cards that have been formatted by other cameras or by a
computer. Reformat the memory card with your camera.
•
Turn o the camera before you insert or remove the memory card.
•
Do not remove the memory card or turn o your camera while the lamp is
blinking, as this may damage your data.
•
When the lifespan of a memory card has expired, you cannot store any more
photos on the card. Use a new memory card.
•
Do not bend, drop, or subject memory cards to heavy impact or pressure.
•
Avoid using or storing memory cards near strong magnetic elds.
•
Avoid using or keeping memory cards in areas with high temperature, high
humidity, or corrosive substances.
•
Prevent memory cards from making contact with liquids, dirt, or foreign
substances. If dirty, wipe the memory card clean with a soft cloth before you
insert the memory card into your camera.
•
Do not allow liquids, dirt, or foreign substances to come in contact with memory
cards or the memory card slot. Doing so may cause memory cards or the camera
to malfunction.
•
When you carry a memory card, use a case to protect the card from electrostatic
discharges.
•
Transfer important data to other media, such as a hard disk, CD, or DVD.
•
When you use the camera for an extended period, the memory card may become
warm. This is normal and does not indicate a malfunction.
The manufacturer is not responsible for any loss of data.
Camera maintenance
Appendixes
150
About the battery
Use only Samsung-approved batteries.
Battery specications
SpecicationDescription
Model
SLB-10A
Type
Lithium-ion battery
Cell capacity
1,030 mAh
Voltage
3.7 V
Charging time* (when the camera is
switched o)
Approximately 240 min
* Charging the battery by connecting it to a computer may take longer.
Battery life
Average shooting time/
Number of photos
Test conditions
(when the battery is fully charged)
Photos
Approximately
155 min/
Approximately
310 photos
The battery life was measured under the
following conditions: in
p
Program mode, in
darkness,
resolution, Fine quality, OIS on.
1. Set the ash option to Fill in, take a single shot,
and zoom in or out.
2. Set the ash option to O, take a single shot,
and zoom in or out.
3. Perform steps 1 and 2, waiting 30 seconds
between each step. Repeat the process for
5 minutes, and then turn o the camera for
1 minute.
4. Repeat steps 1 to 3.
Videos
Approximately
120 min
Record videos at
resolution and 30 fps.
•
The gures above are based on the CIPA test standards. Your results may dier depending
on your actual usage.
•
Several videos were recorded in succession to determine the total recording time.
•
When using network functions, the battery will be depleted more quickly.
Camera maintenance
Appendixes
151
Low battery message
When the battery has fully discharged, the battery icon will turn red and the
"Low Battery" message will appear.
Notes about using the battery
•
Avoid exposing batteries to very cold or very hot temperatures (below 0 °C/32 °F
or above 40 °C/104 °F). Extreme temperatures can reduce the charging capacity of
your batteries.
•
When you use the camera for an extended period, the area around the battery
chamber may become warm. This does not aect the normal use of the camera.
•
Do not pull the power supply cord to disconnect the plug from the power outlet,
as this may cause a re or electric shock.
•
In temperatures below 0 °C/32 °F, battery capacity and battery life may decrease.
•
Battery capacity may decrease in low temperatures, but will return to normal in
milder temperatures.
•
Remove the batteries from your camera when storing it for an extended period.
Installed batteries may leak or corrode over time and cause serious damage
to your camera. Storing the camera for extended periods with the battery
installed causes the battery to discharge. You may not be able to recharge a fully
discharged battery.
•
When you do not use the camera for an extended period (3 months or more),
check the battery and recharge it regularly. If you let the battery discharge
continually, its capacity and life may decrease, which can lead to a malfunction,
re, or explosion.
Cautions about using the battery
Protect batteries, chargers, and memory cards from damage.
Prevent batteries from making contact with metal objects, as this can create a
connection between the + and – terminals of your battery and lead to temporary or
permanent battery damage and may cause a re or electric shock.
Notes about charging the battery
•
If the status lamp blinks in red, ensure that the battery is inserted correctly.
•
If the camera is on while charging, the battery may not fully charge. Turn o the
camera before charging the battery.
•
Do not use your camera when you are charging the battery. This may cause a re
or electric shock.
•
Do not pull the power supply cord to disconnect the plug from the power outlet,
as this may cause a re or electric shock.
•
When the battery is fully discharged, allow it to charge for a while before turning
the camera on. Let the battery charge for at least 10 minutes before turning on
the camera.
•
If you connect the camera to an external power source when the battery is
depleted, using high energy-consuming functions will cause the camera to turn
o. To use the camera normally, recharge the battery.
Camera maintenance
Appendixes
152
•
If you reconnect the power cable when the battery is fully charged, the status
lamp turns on for approximately 30 minutes.
•
Using the ash or recording videos depletes the battery quickly. Charge the
battery until the red status lamp turns o.
•
If the status lamp blinks in red, reconnect the cable, or remove the battery and
insert it again.
•
If you charge the battery when the cable is overheated or the temperature is too
high, the status lamp may blink in red. Charging will start when the battery cools
down.
•
Overcharging batteries may shorten battery life. After charging is nished,
disconnect the cable from your camera.
•
Do not bend or place heavy objects on the AC cable. Doing so may damage the
cable.
Notes about charging with a computer connected
•
Use only the provided USB cable.
•
The battery may not charge when:
-
you use a USB hub
-
other USB devices are connected to your computer
-
you connect the cable to the port on the front side of your computer
-
the USB port of your computer does not support the power output standard
(5 V, 500 mA)
Handle and dispose of batteries and chargers with care
•
Never dispose of batteries in a re. Follow all local regulations when you dispose
of used batteries.
•
Never place batteries or cameras on or in heating devices, such as microwave
ovens, stoves, or radiators. Batteries may explode when they are overheated.
Camera maintenance
Appendixes
153
Personal injury or death can occur if the battery is handled carelessly
or improperly. For your safety, follow these instructions for proper
battery handling:
•
The battery can ignite or explode if not handled properly.
If you notice any deformities, cracks, or other abnormalities in the
battery, immediately discontinue use of the battery and contact a
service center.
•
Use only authentic, manufacturer-recommend battery chargers and
adapters and charge the battery only by the methods described in this
user manual.
•
Do not place the battery near heating devices or expose it to
excessively warm environments, such as the inside of an enclosed car in
the summertime.
•
Do not place the battery in a microwave oven.
•
Avoid storing or using the battery in hot, humid places, such as spas or
shower enclosures.
•
Do not rest the camera on ammable surfaces, such as bedding,
carpets, or electric blankets for a prolonged period.
•
When the camera is switched on, do not leave it in any conned space
for a prolonged period.
•
Do not allow battery terminals to come in contact with metallic objects,
such as necklaces, coins, keys, or watches.
•
Use only authentic, manufacturer-recommended, Lithium-ion
replacement batteries.
•
Do not disassemble the battery or puncture it with any sharp object.
•
Avoid exposing the battery to high pressure or crushing forces.
•
Avoid exposing the battery to major impacts, such as dropping it from
high places.
•
Do not expose the battery to temperatures of 60 °C (140 °F) or above.
•
Do not allow the battery to come in contact with moisture or liquids.
•
Do not expose the battery to sources of excessive heat such as
sunshine, re, or the like.
Disposal guidelines
•
Dispose of the battery with care.
•
Do not dispose of the battery in a re.
•
Disposal regulations may dier by country or region. Dispose of the
battery in accordance with all local and federal regulations.
Guidelines for charging the battery
Charge the battery only by the methods described in this user manual.
The battery can ignite or explode if not charged properly.
Appendixes
154
Before contacting a service center
If you are having trouble with your camera, try these troubleshooting procedures before you contact a service center. If you have attempted the suggested remedy and are still
having problems with your device, contact your local dealer or service center.
When you leave your camera at a service center, be sure to also leave the other components that may have contributed to the malfunction, such as the memory card and battery.
SituationSuggested remedies
Cannot capture photos
•
There is no space on the memory card. Delete
unnecessary les or insert a new card.
•
The memory card is not initialized. Format the
memory card.
•
The memory card is defective. Get a new
memory card.
•
Make sure that the camera is switched on.
•
Charge the battery.
•
Ensure that the battery is inserted correctly.
The camera freezes
The camera may freeze unexpectedly if it
malfunctions. Remove the battery and insert it
again.
The camera heats up
While you use the camera, it may heat up. This
is normal and should not aect your camera’s
lifespan or performance.
The ash does not work
•
The ash option may be set to O. (p. 70)
•
You cannot use the ash in some modes.
SituationSuggested remedies
Cannot turn on the camera
•
Ensure that the battery is inserted.
•
Ensure that the battery is inserted correctly.
(p. 24)
•
Charge the battery.
The power turns o suddenly
•
Charge the battery.
•
Your camera may be in Auto Power O mode.
(p. 142)
•
The camera may turn o to prevent the
memory card from being damaged due to an
impact. Turn on your camera again.
The camera is losing battery
power quickly
•
The battery may lose power more quickly in
low temperatures (below 0 °C/32 °F). Keep the
battery warm by putting it into your pocket.
•
Using the ash or recording videos depletes the
battery quickly. Recharge if needed.
•
Batteries are consumable parts that must be
replaced over time. Get a new battery if the
battery life is diminishing quickly.
Before contacting a service center
Appendixes
155
SituationSuggested remedies
The ash res unexpectedly
The ash may re due to static electricity. The
camera is not malfunctioning.
The date and time are
incorrect
Set the date and time in the display settings.
(p. 141)
The display or buttons do not
work
Remove the battery and insert it again.
The camera display responds
poorly
If you use your camera at very low temperatures,
it may cause the camera screen to malfunction
or discolor. For better performance of your
camera screen, use your camera in moderate
temperatures.
The memory card has an error
•
Turn o your camera, and then turn it on again.
•
Remove your memory card, and then insert it
again.
•
Format the memory card.
See "Cautions when using memory cards" for
more detail. (p. 149)
SituationSuggested remedies
Cannot play back les
If you change the name of a le, your camera may
not play the le (the name of the le should meet
the DCF standard). If you encounter this situation,
play back the les on your computer.
The photo is blurry
•
Make sure that the focus option you set is
suitable for close-up shots. (p. 73)
•
Make sure that the lens is clean. If not, clean the
lens. (p. 145)
•
Make sure that the subject is within range of
the ash. (p. 158)
The colors in the photo do not
match the actual scene
An incorrect White Balance can create unrealistic
color. Select the proper White Balance option to
suit the light source. (p. 82)
The photo is too bright or too
dark
Your photo is overexposed or underexposed.
•
Turn the ash o or on. (p. 70)
•
Adjust the ISO sensitivity. (p. 72)
•
Adjust the exposure value. (p. 80)
Before contacting a service center
Appendixes
156
SituationSuggested remedies
The TV does not display your
phot
os
•
Make sure that the camera is correctly
connected to the TV with the A/V cable.
•
Make sure that your memory card contains
photos.
Your computer does not
recognize your camera
•
Make sure that the USB cable is connected
correctly.
•
Make sure that the camera is switched on.
•
Make sure that you are using a supported
operating system.
Your computer disconnects
the camera while transferring
les
The le transmission may be interrupted by static
electricity. Disconnect the USB cable and connect
it again.
Your computer cannot play
videos
Videos may not play on some video player
programs. To play video les captured with your
camera, use the Multimedia Viewer program that
you can install with the i-Launcher program on
your computer.
SituationSuggested remedies
i-Launcher is not functioning
pr
operly
•
End i-Launcher and restart the program.
•
Make sure that i-Launcher is set to On in the
settings menu. (p. 140)
•
Depending on your computer's specications
and environment, the program may not launch
automatically. In this case, click Start→
All Programs→Samsung→i-Launcher→
Samsung i-Launcher on your Windows
computer. (For Windows 8, open Start
screen, and then select All apps→Samsung
i-Launcher.) Or, click Applications→
Samsung→i-Launcher on your Mac OS
computer.
Your TV or computer
cannot display photos and
videos that are stored on a
microSDXC memory card.
microSDXC memory cards use the exFAT le
system. Ensure that the external device is
compatible with the exFAT le system before
connecting the camera to the device.
Your computer does not
recognize a microSDXC
memory card.
microSDXC memory cards use the exFAT le
system. To use microSDXC memory cards on a
Windows XP computer, download and update
the exFAT le system driver from the Microsoft
website.
Appendixes
157
Image sensor
Type1/2.3" (Approximately 7.77 mm) BSI CMOS
Eective pixelsApproximately 16.3 mega-pixels
Total pixelsApproximately 16.7 mega-pixels
Lens
Focal length
Samsung Lens 21x Zoom Lens f = 4.1–86.1 mm
(35 mm lm equivalent: 23–483 mm)
F-stop rangeF2.8 (W)–F5.9 (T)
Digital zoom
•
Still image mode: 1.0–5.0X
•
Playback mode: 1.0–9.4X (depending on image size)
•
Intelli zoom: 2.0X
Display
TypeTFT LCD
Feature3.0" (75.0 mm) 460K
Focusing
Type
TTL auto focus (Center AF, Multi AF, Tracking AF,
Face Detection AF, Touch AF), Manual Focus,
Video continuous auto focus (CAF)
Range
Wide (W)Tele (T)
Normal (AF)
31 in. (
80
cm)-
innity
138 in. (
350
cm)-
innity
Macro4-31 in. (
10–80
cm)
59-138 in.
(
150–350
cm)
Auto Macro4 in. (
10
cm)-innity
59 in. (
150
cm)-
innity
Manual Focus4 in. (
10
cm)-innity
59 in. (
150
cm)-
innity
Shutter speed
•
Auto: 1/8–1/2,000 sec.
•
Program: 1–1/2,000 sec.
•
Night: 8–1/2,000 sec.
•
Manual: 16–1/2,000 sec.
Exposure
Control
Program AE, Aperture Priority AE, Shutter Priority AE,
Manual Exposure
MeteringMulti, Spot, Center-weighted, Face Detection
Metering rangeEV 1–17 (Wide, ISO Auto), EV 3–17 (Tele, ISO Auto)
Compensation±2EV (1/3 EV Step)
ISO equivalent
Auto, ISO 80, ISO 100, ISO 200, ISO 400, ISO 800, ISO 1600,
ISO 3200
Camera specications
Camera specications
Appendixes
158
Flash
ModeAuto, Red-eye, Fill in, Slow Sync, O, Red-eye Fix
Voor iedereen die moeite heeft deze camera met de Nederlandse taal in te stellen:
1) Zet de camera aan 2) Draai het rechterwieltje met de tekentjes op de stand van het radertje (= instellingen). 3) Druk met je vinger op het scherm op "algemeen". 4) Dan zie je eerst "Netwerkinformatie". Ga er een naar beneden: "Language". 5) Aantikken met je vinger: zoek vervolgens: "Nederlands".
Ik heb ook even moeten puzzelen... Succes ermee!
Geantwoord op 17-7-2015 om 15:04
Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.
Product:
Spelregels forum
Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:
lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;
Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.
Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.
Abonneren
Abonneer u voor het ontvangen van emails voor uw Samsung WB351F bij:
nieuwe vragen en antwoorden
nieuwe handleidingen
U ontvangt een email met instructies om u voor één of beide opties in te schrijven.
Ontvang uw handleiding per email
Vul uw emailadres in en ontvang de handleiding van Samsung WB351F in de taal/talen: Engels als bijlage per email.
De handleiding is 11,3 mb groot.
U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.
Uw handleiding is per email verstuurd. Controleer uw email
Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.
Er is een email naar u verstuurd om uw inschrijving definitief te maken.
Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken
U heeft geen emailadres opgegeven
Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.
Uw vraag is op deze pagina toegevoegd
Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.
