English _127
Symptom Explanation/Solution
The actual recording time is less than
the estimated recording time.
• The estimated recording time is calculated by some references.
• When you record an object that moves fast, the actual recording time may be
shortened.
The recording stops automatically.
• The internal temperature of your camcorder is extremely low. Keep it turned
on and wait until it warms up.
• If you make a frequent recording or deletion of files, the performance of the
storage media will deteriorate. In this case, format the storage media again.
• If you use the memory card with low writing speed, the DVD camcorder
automatically stops recording the video images and then the corresponding
message appears on the LCD screen.
When recording a subject illuminated
by bright light, vertical line appears.
• This is not a malfunction.
When the screen is exposed to direct
sunlight during recording, the screen
becomes red or black for an instant.
• This is not a malfunction.
During recording, the date/time does
not display.
• “
Date/Time” is set to “Off.” Set the “Date/Time Display” to on.
page 94
You cannot record a photo image.
(VP-DX205(i)/DX2050/DX210(i) only)
• Set your camcorder to CARD Photo Record mode.
page 26
• Release the lock on the write-protection tab of the memory card if any.
• The memory card is full. Use a new memory card or format the memory card.
pages 60~62
Or remove unnecessary images.
page 69
• You cannot take photo images onto a disc. Set the Storage mode switch to
CARD.
There is a time difference between
the point where you press Recording
start/stop button and the point where
the recorded video starts/stops.
• On your camcorder, there may be a slight time delay between the point
when you press Recording start/stop button and the actual point where the
recorded video starts/stops. This is not an error.
