564856
1
Verklein
Vergroot
Pagina terug
1/125
Pagina verder
Using the INFO button (Now & Next guide)
The display identifies the current channel and the status of certain audio-video
settings.
The Now & Next guide shows daily TV programme information for each channel
according to the broadcasting time.
N
When you press the INFO button, a channel information banner will appear
on the top of the screen. And then press the ENTER
E
button, you can see
the details of the programme.
Scroll
,
to view information for a desired programme while watching
the current channel.
Scroll
,
to view information for other channels.
Channel Setting
English
Memorizing channels
Aerial
O
MENU
m
Broadcasting
Aerial
ENTER
E
Before your television can begin memorising the available channels, you must
specify the type of signal source that is connected to the TV.
English
Auto Tuning
(depending on the country)
O
MENU
m
Broadcasting
Auto Tuning
ENTER
E
N
Automatically allocated programme numbers may not correspond to actual
or desired programme numbers. If a channel is locked, the PIN input window
appears.
Auto Tuning
Aerial (Air/Cable): Select the aerial source to memorise.
N
When selecting Air, scans for a channel automatically and stores in the
T V.
Channel Type (Digital & Analogue / Digital / Analogue): Select the channel
source to memorise.
Channel Ordering (depending on the country): Select the channel order type.
English
When selecting Cable
Digital & Analogue, Digital or Analogue
Operator Selection (depending on the country): Selects a provider of
cable services.
Search Mode: Scans for all channels with active broadcast stations and
stores them in the TV.
N
If you select Quick, you can set up the Network, Network ID,
Frequency, Modulation and Symbol Rate manually by pressing the
button on the remote control.
Network: Selects the Network ID setting mode among Auto or Manual.
Network ID: When Network is Manual, you can set up Network ID
using the numeric buttons.
English
Frequency: Displays the frequency for the channel (differs in each
country).
Modulation: Displays available modulation values.
Symbol Rate: Displays available symbol rates.
Cable Search Option
(depending on the country & cable channels only)
Sets additional search options such as the frequency and symbol rate for a
cable network search.
Start Frequency / Stop Frequency: Set the start or stop frequency (differs in
each country).
Symbol Rate: Displays available symbol rates.
Modulation: Displays available modulation values.
English
Using the Channel menu
O
MENU
m
Broadcasting
Channel List
ENTER
E
Channel List
The Channel List contains the channels your TV displays when you press the
channel button. You can view channel information, All, TV, Radio, Data/Other,
Analogue or Favourites 1-5.
Press
(Mode) button to change the channel mode, or press
(Sorting)
button to change the channel order according to channel number or name on the
list.
N
When you press the CH LIST button on the remote control, Channel List
screen will be displayed at once.
English
Channel Sorting
Number / Name: Arranges the channel order according to channel number or
name on the list.
Channel Mode
Aerial: Switches to Air or Cable.
Edit Favourites: Set channels you watch frequently as favourites.
N
For detailed information about using Edit Favourites, refer to “Edit
Favourites”.
Favourites 1-5: Shows all favourite channels, arranged in up to five groups.
Each group has a separate screen.
N
The TV displays Favourites 1-5 only if you have added favourites using
Edit Favourites.
English
All: Shows all currently available channels.
TV: Shows all currently available TV channels.
Radio: Shows all currently radio channels.
Data/Other: Shows all currently available MHP or other channels.
Analogue: Shows all currently available analogue channels.
English
Guide
O
MENU
m
Broadcasting
Guide
ENTER
E
The EPG (Electronic Programme Guide) information is provided by broadcasters.
Using programme schedules provided by broadcasters, you can specify
programmes you want to watch in advance so that the channel automatically
changes to the selected programme channel at the specified time. Programme
entries may appear blank or out of date depending on a channel status.
a
Red (Quick Nav): Viewing the TV programmes on the list quickly using
▲/▼/◄/►
buttons.
b
Green (Channel Category): Select the type of channels you want to
display.
{
Yellow (Schedule Manager): Moves to the reserved programmes in
Schedule Manager.
English
Schedule Manager
O
MENU
m
Broadcasting
Schedule Manager
ENTER
E
You can set a desired channel to be displayed automatically at the intended time.
In addition, you can view, modify or delete a channel you have reserved to watch.
N
You must set the current time first using the Time
Clock function in the
System menu to use this function.
1. Press the Schedule on the Schedule Manager screen. The Schedule
Viewing menu appears.
2. Press the
▲/▼/◄/►
buttons to set each option menu.
Aerial: Select the desired broadcasting signal.
Channel: Select the desired channel.
English
Repeat: Select Once, Manual, Sat~Sun, Mon~Fri or Everyday to set at
your convenience. If you select Manual, you can set the day you want.
N
The (
c
) mark indicates the day you’ve selected.
Date: You can set the desired date.
N
It is available when you select Once in Repeat.
Start Time: You can set the start time you want.
N
If you want to edit or cancel a reserved schedule, select the reserved
schedule on Schedule Manager. Then press the ENTER
E
button and
select the Edit or Delete.
English
Edit Channel
O
MENU
m
Broadcasting
Edit Channel
ENTER
E
You can edit or delete channels.
1. Go to Edit Channel screen.
2. Press the
▲/▼
buttons to select the desired channel, then press the
ENTER
E
button. The (
c
) mark indicates the channel you’ve selected.
N
You can select more than one channel.
N
Press the ENTER
E
again to deselect the channel.
English
N
Using the coloured and function buttons with the Edit Channel.
a
Red (Change Number): Changes channel order on the channel list.
E
(Done): Completes changing the channel order.
N
Digital channel does not support this function when the Edit Channel
Number (depending on the country) is set to Disable.
b
Green (Delete): Deletes a channel from the channel list.
{
Yellow (Lock / Unlock): Lock a channel so that the channel cannot be
selected and viewed. / Unlock the channel that you locked.
N
This function is available only when the Channel Lock is set to On.
N
The PIN input screen appears. Enter your 4-digit PIN. Change the
PIN using the Change PIN option.
English
}
Blue (Select All / Deselect All): Selects or deselects all channels at
once.
(Go To): Goes to channel directly by pressing numbers (0~9).
k
(Page): Moves to previous or next page.
T
(Tools): Displays the option menu. The option menu items that appear
may differ depending on the channel status and type.
Sorting (digital channels only): Changes the list ordered by channel
number or channel name.
Aerial: Selects the desired broadcasting signal.
English
Category: Change the channel mode to All, TV, Radio, Data/Other,
Analogue, Recently Viewed, Most Viewed. The selected channel
mode is displayed.
Edit Favourites: Go to Edit Favourites screen directly.
Rename channel (analogue channels only): Assign a name of up to
five characters to a channel. For example, Food, Golf, etc. This makes
it easier to find and select the channel.
Channel Info: Display details of the selected channel.
Information: Display details of the selected programme.
English
Edit Favourites
t
O
MENU
m
Broadcasting
Edit Favourites
ENTER
E
You can add, edit or delete favourite channels.
1. Go to Edit Favourites screen.
2. Press the
▲/▼
buttons to select the desired channel, and then press
ENTER
E
button.
3. Choose a specific favourite list among Favourites 1-5 using
b
(Change Fav.)
button, and then press the
}
(Add) button. The selected channel has been
added in Favourites 1-5.
N
One favourite channel can be added in several of favourites among
Favourites 1-5.
English
N
Using the coloured and function buttons with the Edit Favourites.
a
Red (Category / Change order)
Category: Changes the channel mode to All, TV, Radio, Analogue,
Data/Other, Recently Viewed, Most Viewed. The selected channel
mode is displayed.
Change order: Changes the favourite channel order.
E
(Done): Completes changing the channel order.
English
b
Green (Change Fav.): Changes favourite list among Favourites 1-5.
{
Yellow (Select All / Deselect All): Selects or deselects all channels at
once.
}
Blue (Add / Delete)
Add: Adds selected channels to Favourites 1-5.
Delete: Deletes the favourite channel from Favourites 1-5.
English
(Go To): Goes to channel directly by pressing numbers (0~9).
k
(Page): Moves to previous or next page.
T
(Tools): Displays the option menu. The option menu items that appear
may differ depending on the channel status and type.
Copy to Favourites: Edit the selected favourite channel in Favourites
1-5.
Rename Favourites: Assign your own favourite channel name.
Aerial: Select the desired broadcasting signal.
Edit Channel: Go to Edit Channel screen directly.
Information: Display details of the selected programme.
English
Locking Programme
Programme Rating Lock
(depending on the country)
O
MENU
m
Broadcasting
Programme Rating Lock
ENTER
E
Prevent unauthorised users, such as children, from watching unsuitable
programme with a user-defined 4-digit PIN code. If the selected channel is
locked, the “
\
” symbol will be displayed.
N
The items of Programme Rating Lock differs depending on the country.
English
Channel Lock
O
MENU
m
Broadcasting
Channel Lock
ENTER
E
Lock channels in Channel menu to prevent unauthorised users, such as children,
from watching unsuitable programme.
N
Available only when the Source is set to TV.
English
Other Features
Channel Settings
O
MENU
m
Broadcasting
Channel Settings
ENTER
E
Country (Area)
(depending on the country)
The PIN input screen appears. Enter your 4 digit PIN number.
Digital Channel: Change the country for digital channels.
Analogue Channel: Change the country for analogue channels.
English
Manual Tuning
Scans for a channel manually and stores in the TV.
N
If a channel is locked, the PIN input window appears.
N
According to the channel source, Manual Tuning may be supported.
Digital Channel Tuning: Scans for a digital channel manually and stores
in the TV. Press the New button to search the digital channels. When
scanning has finished, a channel is updated in the channel list.
When selecting Aerial
Air: Channel, Frequency, Bandwidth
When selecting Aerial
Cable: Frequency, Modulation, Symbol
Rate
English
Analogue Channel Tuning: Scans for an analogue channel. Press the
New button to search the channels by adjusting the Programme, Colour
System, Sound System, Channel, Search.
N
Channel mode
P (programme mode): When tuning is complete, the broadcasting
stations in your area have been assigned to the position numbers
from P0 to P99. You can select a channel by entering the position
number in this mode.
C (aerial channel mode) / S (cable channel mode): These two
modes allow you to select a channel by entering the assigned
number for each aerial broadcasting station or cable channel.
English
Fine Tune
(analogue channels only)
If the signal is weak or distorted, fine tune the channel manually.
N
Fine tuned channels are marked with an asterisk “*”.
N
To reset the fine-tuning, select Reset.
Transfer Channel List
(depending on the country)
Imports or exports the channel map. You should connect a USB storage to
use this function.
N
The PIN number input screen appears. Enter your 4 digit PIN number.
N
Supported file systems are FAT and exFAT.
Delete CAM Operator Profile: Selects the CAM operator to delete.
English
Subtitle
t
O
MENU
m
Broadcasting
Subtitle
ENTER
E
Use this menu to set the Subtitle mode.
Subtitle: Switches subtitles on or off.
Subtitle Mode: Sets the subtitle mode.
Subtitle Language: Sets the subtitle language.
N
If the programme you are watching does not support the Hearing
Impaired function, Normal automatically activates even if the Hearing
Impaired mode is selected.
English
N
English is the default in cases where the selected language is unavailable
in the broadcast.
Primary Subtitle: Sets the primary subtitle.
Secondary Subtitle: Sets the secondary subtitle.
Edit Channel Number (depending on the country)
O
MENU
m
Broadcasting
Edit Channel Number
ENTER
E
Use this change channel number. When channel number is changed, channel
information is not updated automatically.
English
Audio Options
(digital channels only)
O
MENU
m
Broadcasting
Audio Options
ENTER
E
Audio Language
t
Change the default value for audio languages.
Primary Audio / Secondary Audio: You can set the primary or secondary
audio.
N
The available language may differ depending on the broadcast.
English
Audio Format
When sound is emitted from both the main speaker and the audio receiver,
a sound echo may occur due to the decoding speed difference between
the main speaker and the audio receiver. In this case, use the TV Speaker
function.
N
Audio Format option may differ depending on the broadcast. 5.1ch
Dolby digital sound is only available when connecting an external speaker
through an optical cable.
Audio Description (not available in all locations)
This function handles the Audio Stream for the AD (Audio Description) which
is sent along with the Main audio from the broadcaster.
Audio Description: Turn the audio description function on or off.
Volume: Adjust the audio description volume.
English
Teletext Language
(depending on the country)
O
MENU
m
Broadcasting
Teletext Language
ENTER
E
Teletext Language
N
English is the default in cases where the selected language is unavailable
in the broadcast.
Primary teletext / Secondary teletext
N
Primary teletext and Secondary teletext may not be supported in
some locations.
English
Digital Text
(UK only)
O
MENU
m
Broadcasting
Digital Text
ENTER
E
If the programme broadcasts with digital text, this feature is enabled.
N
MHEG (Multimedia and Hypermedia Information Coding Experts Group)
An International standard for data encoding systems used in multimedia and
hypermedia. This is at a higher level than the MPEG system which includes
data-linking hypermedia such as still images, character service, animation,
graphic and video files as well as multimedia data. MHEG is user runtime
interaction technology and is being applied to various fields including VOD
(Video-On-Demand), ITV (Interactive TV), EC (Electronic Commerce), tele
education, teleconferencing, digital libraries and network games.
English
Application Info: View information on the CAM inserted into the CI slot and
on the “CI or CI+ CARD” which is inserted into the CAM. You can install the
CAM anytime whether the TV is on or off.
1. Purchase a CI CAM module at your nearest dealer or by phone.
2. Firmly insert the “CI or CI+ CARD” into the CAM in the direction of the
arrow.
3. Insert the CAM with the “CI or CI+ CARD” into the common interface slot,
in the direction of the arrow so that it aligns parallel with the slot.
4. Check if you can see a picture on a scrambled signal channel.
English
Changing the Preset Picture Mode
Picture Mode
t
O
MENU
m
Picture
Picture Mode
ENTER
E
Select your preferred picture type.
N
When connecting a PC, you can only make changes to the Entertain and
Standard.
Dynamic: Suitable for a bright room.
Standard: Suitable for a normal environment.
Natural
for LED 5 series 32" and above
: Suitable for reducing eye strain.
Movie: Suitable for watching movies in a dark room.
Entertain: Suitable for watching movies and games.
N
It is only available when connecting a PC.
Basic Features
English
Adjusting Picture Settings
Samsung MagicAngle
for LED 19", 22" models
O
MENU
m
Picture
Samsung MagicAngle
ENTER
E
Adjust screen viewing Angle to optimise screen quality according to your viewing
position.
Samsung MagicAngle: When viewing the screen at an angle from below or
above by setting the appropriate mode for each position, you can obtain a
similar picture quality as viewing the screen directly from the front.
English
Wide Zoom: Magnifies the picture size more than 4:3.
N
Adjusts the Position by using
,
buttons.
Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size.
N
Adjusts the Zoom or Position by using
,
button.
4:3: Sets the picture to basic (4:3) mode.
N
Do not watch in 4:3 format for a long time. Traces of borders displayed
on the left, right and centre of the screen may cause image retention
(screen burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off when HDMI (720p /
1080i / 1080p) or Component (1080i / 1080p) signals are inputted.
English
Smart View 1
for LED 5 series 32" and above
: Reduces the 16:9 picture by 50%.
Smart View 2
for LED 5 series 32" and above
: Reduces the 16:9 picture by 25%.
N
NOTE
Smart View 1
for LED 5 series 32" and above
is enabled only in HDMI
mode.
Smart View 2
for LED 5 series 32" and above
is enabled only in DTV and
HDMI modes.
The picture size can vary depending on the input resolution when
content is played using Videos under Media Play.
Zoom/Position: Adjust the picture size and position. It is only available in
Zoom.
Position: Adjust the picture position. It is only available in Screen Fit or Wide
Zoom.
English
Setting the On / Off Timer
O
MENU
m
System
Time
On Timer <or> Off Timer
ENTER
E
On Timer: You can set up three separate On Timer configurations. (On Timer
1, On Timer 2, On Timer 3)
Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or
Manual to set at your convenience. If you select Manual, you can set up the
day you want to activate the timer.
N
The
c
mark indicates the day you’ve selected.
Time: Set the hour and minute.
Volume: Set the desired volume level.
English
Source: To select the source of the content that will play when the TV turns
on. You can:
Select TV and have the TV display a specific air or cable channel.
Select USB and have the TV play back photo or audio files from a USB
device.
Select a source on your TV (HDMI1, HDMI2/DVI, AV, Component, etc.)
that you have connected a set-top box to, and have the TV display a
channel from the set-top box.
N
The USB device must be connected to your TV before you can select
USB.
English
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Samsung UE32H5030 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Samsung UE32H5030 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,08 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Samsung UE32H5030

Samsung UE32H5030 Gebruiksaanwijzing - Nederlands - 125 pagina's

Samsung UE32H5030 Gebruiksaanwijzing - Deutsch - 125 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info