510941
36
Verklein
Vergroot
Pagina terug
1/151
Pagina verder
E-MANUAL
Thank you for purchasing this Samsung
product. To receive more complete service,
please register your product at
www.samsung.com/register
Model __________ Serial No. ____________
Contents
Channel Setting
• UsingtheINFObutton(Now&Nextguide) 1
•
Memorizingchannels 2
•
UsingtheChannelmenu 6
•
LockingProgramme 19
•
OtherFeatures 21
Basic Features
• ChangingthePresetPictureMode 32
•
AdjustingPictureSettings 33
•
ChangingthePictureOptions 41
•
ChangingthePresetSoundMode 51
•
AdjustingSoundSettings 52
•
SelectingtheSoundMode 59
Preference Features
• Executinginitialsetup 60
•
SettingtheTime 61
•
UsingtheSleepTimer 63
•
SettingtheOn/OffTimer 64
•
EconomicalSolutions 69
•
OtherFeatures 71
Advanced Features
• UsingtheSourceList 78
•
ConnectingaUSBDevice 79
•
UsingtheMediaContents 85
•
PlayingthePhotos/Videos/Music 87
•
Usingthe3Dfunction 95
Other Information
• Viewingthee-Manual 102
•
UsingtheSelfDiagnosis 103
•
UpdatingtheSoftware 105
•
ChangingtheUseMode 107
•
ViewingtheContactSamsung 108
•
UsingtheSportsMode 109
•
UsingtheSatelliteSystem 110
•
UsingtheWirelessNetwork 118
•
UsingtheWiredNetwork 131
•
ManagingtheNetworkConnectedDevices 138
•
UsingtheDLNAFunctions 141
Using the INFO button (Now & Next guide)
The display identifies the current channel and the status of certain audio-video
settings.
The Now & Next guide shows daily TV programme information for each channel
according to the broadcasting time.
N
When you press the INFO button, a channel information banner will appear
on the top of the screen. And then press the ENTER
E
button, you can see
the details of the programme.
Scroll
,
to view information for a desired programme while watching
the current channel.
Scroll
,
to view information for other channels.
Channel Setting
English
Memorizing channels
Aerial
O
MENU
m
Broadcasting
Aerial
ENTER
E
Before your television can begin memorising the available channels, you must
specify the type of signal source that is connected to the TV.
English
Auto Tuning
(depending on the country)
O
MENU
m
Broadcasting
Auto Tuning
ENTER
E
N
Automatically allocated programme numbers may not correspond to actual
or desired programme numbers. If a channel is locked, the PIN input window
appears.
Auto Tuning
Aerial (Air / Cable): Select the aerial source to memorise.
N
When selecting Air, scans for a channel automatically and stores in the
T V.
Channel Type (Digital & Analogue / Digital / Analogue): Select the channel
source to memorise.
English
When selecting Cable
Digital & Analogue, Digital or Analogue
Operator Selection (depending on the country): Selects a provider of
cable services.
Search Mode: Scans for all channels with active broadcast stations and
stores them in the TV.
N
If you select Quick, you can set up the Network, Network ID,
Frequency, Modulation and Symbol Rate manually by pressing the
button on the remote control.
Network: Selects the Network ID setting mode among Auto or Manual.
Network ID: When Network is Manual, you can set up Network ID
using the numeric buttons.
English
Frequency: Displays the frequency for the channel (differs in each
country).
Modulation: Displays available modulation values.
Symbol Rate: Displays available symbol rates.
Cable Search Option
(depending on the country & cable channels only)
Sets additional search options such as the frequency and symbol rate for a
cable network search.
Start Frequency / Stop Frequency: Set the start or stop frequency (differs in
each country).
Symbol Rate: Displays available symbol rates.
Modulation: Displays available modulation values.
English
Using the Channel menu
O
MENU
m
Broadcasting
Channel List
ENTER
E
Channel List
The Channel List contains the channels your TV displays when you press the
channel button. You can view channel information, All, TV, Radio, Data/Other,
Analogue or Favourites 1-5.
Press
(Mode) button to change the channel mode, or press
(Sorting)
button to change the channel order according to channel number or name on the
list.
N
When you press the CH LIST button on the remote control, Channel List
screen will be displayed at once.
English
Channel Sorting
Number / Name: Arranges the channel order according to channel number
or name on the list.
Channel Mode
Air / Cable: Switches to Air or Cable.
Edit Favourites: Set channels you watch frequently as favourites.
N
For detailed information about using Edit Favourites, refer to “Edit
Favourites”.
Favourites 1-5: Shows all favourite channels, arranged in up to five groups.
Each group has a separate screen.
N
The TV displays Favourites 1-5 only if you have added favourites using
Edit Favourites.
English
All: Shows all currently available channels.
TV: Shows all currently available TV channels.
Radio: Shows all currently radio channels.
Data/Other: Shows all currently available MHP or other channels.
Analogue: Shows all currently available analogue channels.
English
Guide
O
MENU
m
Broadcasting
Guide
ENTER
E
The EPG (Electronic Programme Guide) information is provided by broadcasters.
Using programme schedules provided by broadcasters, you can specify
programmes you want to watch in advance so that the channel automatically
changes to the selected programme channel at the specified time. Programme
entries may appear blank or out of date depending on a channel status.
a
Red (Quick Nav): Viewing the TV programmes on the list quickly using
▲/▼/◄/►
buttons.
b
Green (Channel Category): Select the type of channels you want to
display.
{
Yellow (Schedule Manager): Moves to the reserved programmes in
Schedule Manager.
English
Schedule Manager
O
MENU
m
Broadcasting
Schedule Manager
ENTER
E
You can set a desired channel to be displayed automatically at the intended time.
In addition, you can view, modify or delete a channel you have reserved to watch.
N
You must set the current time first using the Time
Clock function in the
System menu to use this function.
1.
Press the Schedule on the Schedule Manager screen. The Schedule
Viewing menu appears.
2.
Press the
▲/▼/◄/►
buttons to set each option menu.
Aerial: Select the desired broadcasting signal.
Channel: Select the desired channel.
English
Repeat: Select Once, Manual, Sat~Sun, Mon~Fri or Everyday to set at
your convenience. If you select Manual, you can set the day you want.
N
The (
c
) mark indicates the day you’ve selected.
Date: You can set the desired date.
N
It is available when you select Once in Repeat.
Start Time: You can set the start time you want.
N
If you want to edit or cancel a reserved schedule, select the reserved
schedule on Schedule Manager. Then press the ENTER
E
button and
select the Edit or Delete.
English
Edit Channel
O
MENU
m
Broadcasting
Edit Channel
ENTER
E
You can edit or delete channels.
1.
Go to Edit Channel screen.
2.
Press the
▲/▼
buttons to select the desired channel, then press the
ENTER
E
button. The (
c
) mark indicates the channel you’ve selected.
N
You can select more than one channel.
N
Press the ENTER
E
again to deselect the channel.
English
N
Using the coloured and function buttons with the Edit Channel.
a
Red (Change Number): Changes channel order on the channel list.
b
Green (Lock / Unlock): Lock a channel so that the channel cannot be
selected and viewed. / Unlock the channel that you locked.
N
This function is available only when the Channel Lock is set to On.
N
The PIN input screen appears. Enter your 4-digit PIN. Change the
PIN using the Change PIN option.
{
Yellow (Delete): Deletes a channel from the channel list.
English
}
Blue (Select All / Deselect All): Selects or deselects all channels at
once.
(Go To): Goes to channel directly by pressing numbers (0~9).
k
(Page): Move to previous or next page.
E
(Done): Completes changing the channel order.
T
(Tools): Displays the option menu. The option menu items that appear
may differ depending on the channel status and type.
Sorting (digital channels only): Changes the list ordered by channel
number or channel name.
Aerial: Select the desired broadcasting signal.
English
Category: Change the channel mode to All, TV, Radio, Data/Other,
Analogue, Recently Viewed, Most Viewed. The selected channel
mode is displayed.
Edit Favourites: Go to Edit Favourites screen directly.
Rename channel (analogue channels only): Assign a name of up to
five characters to a channel. For example, Food, Golf, etc. This makes
it easier to find and select the channel.
Channel Info: Display details of the selected channel.
Information: Display details of the selected programme.
English
Edit Favourites
t
O
MENU
m
Broadcasting
Edit Favourites
ENTER
E
You can add, edit or delete favourite channels.
1.
Go to Edit Favourites screen.
2.
Press the
▲/▼
buttons to select the desired channel, and then press
ENTER
E
button.
3.
Choose a specific favourite list among Favourites 1-5 using
b
(Change Fav.)
button, and then press the
{
(Add) button. The selected channel has been
added in Favourites 1-5.
N
One favourite channel can be added in several of favourites among
Favourites 1-5.
English
N
Using the coloured and function buttons with the Edit Favourites.
a
Red (Category / Change order)
Category: Changes the channel mode to All, TV, Radio, Analogue,
Data/Other, Recently Viewed, Most Viewed. The selected channel
mode is displayed.
Change order: Changes the favourite channel order.
E
(Done): Completes changing the channel order.
b
Green (Change Fav.): Changes favourite list among Favourites 1-5.
{
Yellow (Add / Delete)
Add: Adds selected channels to Favourites 1-5.
Delete: Deletes the favourite channel from Favourites 1-5.
}
Blue (Select All / Deselect All): Selects or deselects all channels at
once.
English
(Go To): Goes to channel directly by pressing numbers (0~9).
k
(Page): Move to previous or next page.
T
(Tools): Displays the option menu. The option menu items that appear
may differ depending on the channel status and type.
Copy to favourites: Edit the selected favourite channel in Favourites
1-5. You can add or delete from favourite list.
Rename Favourites: Assign your own favourite channel name.
Aerial: Select the desired broadcasting signal.
Edit Channel: Go to Edit Channel screen directly.
Information: Display details of the selected programme.
English
Locking Programme
Programme Rating Lock
(depending on the country)
O
MENU
m
Broadcasting
Programme Rating Lock
ENTER
E
Prevent unauthorized users, such as children, from watching unsuitable
programme with a user-defined 4-digit PIN code. If the selected channel is
locked, the “
\
” symbol will be displayed.
N
The items of Programme Rating Lock differs depending on the country.
English
Channel Lock
O
MENU
m
Broadcasting
Channel Lock
ENTER
E
Lock channels in Channel menu to prevent unauthorized users, such as children,
from watching unsuitable programme.
N
Available only when the Source is set to TV.
English
Other Features
Channel Settings
O
MENU
m
Broadcasting
Channel Settings
ENTER
E
Country (Area)
(depending on the country)
The PIN input screen appears. Enter your 4 digit PIN number.
Digital Channel: Change the country for digital channels.
Analogue Channel: Change the country for analogue channels.
English
Manual Tuning
Scans for a channel manually and stores in the TV.
N
If a channel is locked, the PIN input window appears.
N
According to the channel source, Manual Tuning may be supported.
Digital Channel Tuning: Scans for a digital channel manually and stores
in the TV. Press the New button to search the digital channels. When
scanning has finished, a channel is updated in the channel list.
When selecting Aerial
Air: Channel, Frequency, Bandwidth
When selecting Aerial
Cable: Frequency, Modulation, Symbol
Rate
English
Analogue Channel Tuning: Scans for an analogue channel. Press the
New button to search the channels by adjusting the Programme, Colour
System, Sound System, Channel, Search.
N
Channel mode
P (programme mode): When tuning is complete, the broadcasting
stations in your area have been assigned to the position numbers
from P0 to P99. You can select a channel by entering the position
number in this mode.
C (aerial channel mode) / S (cable channel mode): These two
modes allow you to select a channel by entering the assigned
number for each aerial broadcasting station or cable channel.
English
Fine Tune
(analogue channels only)
If the signal is weak or distorted, fine tune the channel manually.
N
Fine tuned channels are marked with an asterisk “*”.
N
To reset the fine-tuning, select Reset.
Transfer Channel List
(depending on the country)
Imports or exports the channel map. You should connect a USB storage to
use this function.
N
The PIN number input screen appears. Enter your 4 digit PIN number.
N
Supported file systems are FAT and exFAT.
Delete CAM Operator Profile: Selects the CAM operator to delete.
English
Subtitle
t
O
MENU
m
Broadcasting
Subtitle
ENTER
E
Use this menu to set the Subtitle mode.
Subtitle: Switches subtitles on or off.
Subtitle Mode: Sets the subtitle mode.
Subtitle Language: Sets the subtitle language.
N
If the programme you are watching does not support the Hearing
Impaired function, Normal automatically activates even if the Hearing
Impaired mode is selected.
N
English is the default in cases where the selected language is unavailable
in the broadcast.
Primary Subtitle: Sets the primary subtitle.
Secondary Subtitle: Sets the secondary subtitle.
English
Audio Options
(digital channels only)
O
MENU
m
Broadcasting
Audio Options
ENTER
E
Audio Language
t
Change the default value for audio languages.
Primary Audio / Secondary Audio: You can set the primary or secondary
audio.
N
The available language may differ depending on the broadcast.
English
Audio Format
When sound is emitted from both the main speaker and the audio receiver,
a sound echo may occur due to the decoding speed difference between
the main speaker and the audio receiver. In this case, use the TV Speaker
function.
N
Audio Format option may differ depending on the broadcast. 5.1ch
Dolby digital sound is only available when connecting an external speaker
through an optical cable.
Audio Description (not available in all locations)
This function handles the Audio Stream for the AD (Audio Description) which
is sent along with the Main audio from the broadcaster.
Audio Description: Turn the audio description function on or off.
Volume: Adjust the audio description volume.
English
Teletext Language
(depending on the country)
O
MENU
m
Broadcasting
Teletext Language
ENTER
E
Teletext Language
N
English is the default in cases where the selected language is unavailable
in the broadcast.
Primary Teletext / Secondary Teletext
N
Primary Teletext and Secondary Teletext may not be supported in
some locations.
English
Digital Text
(UK only)
O
MENU
m
Broadcasting
Digital Text
ENTER
E
If the programme broadcasts with digital text, this feature is enabled.
N
MHEG (Multimedia and Hypermedia Information Coding Experts Group)
An International standard for data encoding systems used in multimedia and
hypermedia. This is at a higher level than the MPEG system which includes
data-linking hypermedia such as still images, character service, animation,
graphic and video files as well as multimedia data. MHEG is user runtime
interaction technology and is being applied to various fields including VOD
(Video-On-Demand), ITV (Interactive TV), EC (Electronic Commerce), tele
education, teleconferencing, digital libraries and network games.
English
Common Interface
O
MENU
m
Broadcasting
Common Interface
ENTER
E
CI Menu: This enables the user to select from the CAM-provided menu.
Select the CI Menu based on the menu PC Card.
CAM video transcoding: You can configure the setting to transcode the
video codec from the CAM automatically. Turn it Off if you do not want to use
it.
N
You must use a CAM that supports transcoding the video codec.
English
Application Info: View information on the CAM inserted into the CI slot and
on the “CI or CI+ CARD” which is inserted into the CAM. You can install the
CAM anytime whether the TV is on or off.
1.
Purchase a CI CAM module at your nearest dealer or by phone.
2. Firmly insert the “CI or CI+ CARD” into the CAM in the direction of the
arrow.
3.
Insert the CAM with the “CI or CI+ CARD” into the common interface slot,
in the direction of the arrow so that it aligns parallel with the slot.
4.
Check if you can see a picture on a scrambled signal channel.
English
Changing the Preset Picture Mode
Picture Mode
t
O
MENU
m
Picture
Picture Mode
ENTER
E
Select your preferred picture type.
N
When connecting a PC, you can only make changes to the Entertain and
Standard.
Dynamic: Suitable for a bright room.
Standard: Suitable for a normal environment.
Natural
for LED 6 series
: Suitable for reducing eye strain.
Movie: Suitable for watching movies in a dark room.
Entertain: Suitable for watching movies and games.
N
It is only available when connecting a PC.
Basic Features
English
Adjusting Picture Settings
Samsung MagicAngle
for LED 19", 22" models
O
MENU
m
Picture
Samsung MagicAngle
ENTER
E
Adjust screen viewing Angle to optimize screen quality according to your viewing
position.
Samsung MagicAngle: When viewing the screen at an angle from below or
above by setting the appropriate mode for each position, you can obtain a
similar picture quality as viewing the screen directly from the front.
Off: Select when viewing from the front position.
Lean Back Mode: Select when viewing from a slightly lower position.
Standing Mode: Select when viewing from the upper position.
Mode: Adjust screen viewing angle.
N
When Samsung MagicAngle is set to Lean Back Mode or Standing Mode,
Gamma is not available.
English
Backlight
for LED TV
/ Cell Light
for PDP TV
/ Contrast / Brightness /
Sharpness / Colour / Tint (G/R)
Your television has several setting options for picture quality control.
N
NOTE
In analogue TV, Ext., AV modes of the PAL system, the Tint (G/R)
function is not available.
When connecting a PC, you can only make changes to
Backlight
for LED TV
/ Cell Light
for PDP TV
, Contrast, Brightness and
Sharpness.
Settings can be adjusted and stored for each external device connected
to the TV.
Lowering picture brightness reduces power consumption.
English
Picture Size
O
MENU
m
Picture
Picture Size
ENTER
E
Set the various picture options such as picture size and aspect ratio.
N
The available items may differ depending on the selected mode.
N
Depending on the input source, the picture size options may vary.
Picture Size
t
: Your cable box/satellite receiver may have its own set
of screen sizes as well. However, we highly recommend you use 16:9 mode
most of the time.
Auto Wide: Automatically adjusts the picture size to the 16:9 aspect ratio.
16:9: Sets the picture to 16:9 wide mode.
Wide Zoom: Magnifies the picture size more than 4:3.
N
Adjusts the Position by using
,
buttons.
English
Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size.
N
Adjusts the Zoom or Position by using
,
button.
4:3: Sets the picture to basic (4:3) mode.
N
Do not watch in 4:3 format for a long time. Traces of borders displayed
on the left, right and centre of the screen may cause image retention
(screen burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off when HDMI (720p /
1080i / 1080p) or Component (1080i / 1080p) signals are inputted.
English
Smart View 1
for LED 6 series
: Reduces original screen by 50%.
Smart View 2
for LED 6 series
: Reduces original screen by 25%.
N
NOTE
Smart View 1 is enabled only in HDMI mode.
Smart View 2 is enabled only in DTV and HDMI modes.
The picture size can vary depending on the input resolution when
content is played using Videos under Media Play.
Zoom/Position: Adjust the picture size and position. It is only available in
Zoom.
Position: Adjust the picture position. It is only available in Screen Fit or Wide
Zoom.
English
N
NOTE
After selecting Screen Fit in HDMI (1080i / 1080p) or Component (1080i
/ 1080p) mode, you may need to centre the picture:
1.
Select the Position. Press the ENTER
E
button.
2.
Press the
,
,
or
button to move the picture.
If you want to reset the position you adjusted, select Reset in the
Position screen. The picture will be set to its default position.
If you use the Screen Fit function with HDMI 720p input, 1 line will be cut
at the top, bottom, left and right as in the overscan function.
4:3 Screen Size: Available only when picture size is set to Auto Wide. You
can determine the desired picture size at the 4:3 WSS (Wide Screen Service)
size or the original size. Each European country requires different picture size.
English
PIP
t
O
MENU
m
Picture
PIP
ENTER
E
You can watch the TV tuner and one external video source simultaneously. For
example, if you have a cable box connected to the Cable In jack, you can use PIP
to watch programs from the cable box and watch a movie from a Blu-ray player
attached to the HDMI In jack.
N
NOTE
If you turn the TV off while watching in PIP mode, the PIP window will
disappear.
You may notice that the picture in the PIP window becomes slightly
unnatural when you use the main screen to view a game or karaoke.
English
PIP settings
Main picture Sub picture
Component, HDMI TV
PIP: Activate or deactivate the PIP function.
Aerial: Select either Air or Cable as the input source for the sub-screen.
Channel: Select the channel for the sub-screen.
Size: Select a size for the sub-picture.
Position: Select a position for the sub-picture.
Sound Select: You can choose the desired sound in PIP mode.
English
Changing the Picture Options
Advanced Settings
O
MENU
m
Picture
Advanced Settings
ENTER
E
(available in Standard / Movie mode)
You can adjust the detailed setting for the screen including colour and contrast.
N
When connecting a PC, you can only make changes to the White Balance
and Gamma.
Dynamic Contrast: Adjust the screen contrast.
Black Tone: Select the black level to adjust the screen depth.
Flesh Tone: Adjust the flesh tone colour.
English
RGB Only Mode: Displays the Red, Green and Blue colour for making fine
adjustments to the hue and saturation.
Colour Space: Adjust the range of colours available to create the image.
N
To adjust Colour, Red, Green, Blue and Reset, set Colour Space to
Custom.
for PDP TV / LED 6 series
White Balance: Adjust the colour temperature for a more natural picture.
R-Offset / G-Offset / B-Offset: Adjust each colour’s (red, green, blue)
darkness.
R-Gain / G-Gain / B-Gain: Adjust each colour’s (red, green, blue) brightness.
Reset: Resets the White Balance to its default settings.
English
10p White Balance
for PDP TV / LED 6 series
: Controls the white balance in 10
point interval by adjusting the red, green, and blue brightness.
N
Available when the picture mode is set to Movie and when the external
input is set to all input.
N
Some external devices may not support this function.
Interval: Select interval to adjust.
Red: Adjust the red level.
Green: Adjust the green level.
Blue: Adjust the blue level.
Reset: Resets the 10p White Balance to its default settings.
Gamma: Adjust the primary colour intensity.
English
Expert Pattern
for PDP TV / LED 6 series
: By running the Expert Pattern
function, the picture can be calibrated without a generator or filter. If the OSD
menu disappears or a menu other than the Picture menu is opened, the
calibration is saved and the Expert Pattern window disappears.
N
While the Expert Pattern is running, sound is not outputted.
N
Only enabled on Component / HDMI mode.
Motion Lighting: Reduce power consumption by brightness control adapted
motion.
N
This function is not supported in 3D mode.
for PDP 4900 / LED 6 series
N
Only available in Standard mode.
N
When changing a setting value of Backlight
for LED TV
/ Cell
Light
for PDP TV
, Brightness or Contrast, Motion Lighting will be set to
Off.
English
Picture Options
O
MENU
m
Picture
Picture Options
ENTER
E
N
When connecting a PC, you can only make changes to the Colour Tone.
Colour Tone
N
Warm1 or Warm2 will be deactivated when the picture mode is
Dynamic.
N
Settings can be adjusted and stored for each external device connected
to an input on the TV.
Digital Clean View: If the broadcast signal received by your TV is weak, you
can activate the Digital Clean View feature to reduce any static and ghosting
that may appear on the screen.
N
When the signal is weak, try other options until the best picture is
displayed.
English
Auto Visualisation: When changing analogue channels, displays signal
strength.
N
Only available for analogue channels.
N
When the INFO button is pressed, the signal strength bar is displayed.
N
When bar is green, you are receiving the best possible signal.
MPEG Noise Filter: Reduces MPEG noise to provide improved picture
quality.
HDMI Black Level: Selects the black level on the screen to adjust the screen
depth.
N
Available only in HDMI mode (RGB signals).
English
Film Mode: Sets the TV to automatically sense and process film signals from
all sources and adjust the picture for optimum quality.
N
The Cinema Smooth function is only activated when HDMI 24Hz signal
is inputted.
for PDP TV
N
Available in TV mode and external input mode which supports SD (480i /
576i) and HD (1080i) except in PC mode.
N
If the screen does not seem natural, change its option to Off / Auto1 /
Auto2 in Film Mode.
English
Motion Plus
for LED 6 series
: Removes drag from fast scenes with a lot of
movement to provide a clearer picture.
N
The Info screen on your TV displays the resolution and frequency of the
incoming signal (60Hz), but not the frequency the TV is generating for the
image it is displaying by using Motion Plus function.
N
If noise occurs on the screen, please set up the Motion Plus to Off. If
Motion Plus is Custom, you can set up the Blur Reduction, Judder
Reduction or Reset manually.
N
If Motion Plus is Demo, you can compare the difference of on and off
modes.
English
Blur Reduction: Adjusts the blur reduction level from video sources.
Judder Reduction: Adjusts the judder reduction level from video sources
when playing films.
LED Clear Motion: Removes drag from fast scenes with a lot of movement
to provide a clear picture.
N
It will be deactivated when the picture mode is set to Natural.
N
The screen may become slightly darker when you play LED Clear
Motion.
Reset: Reset the custom settings.
Black Optimiser
for PDP TV
: Realizes of the black colour deeply and expands
the contrast ratio.
N
When connecting a PC, it will be set to off and deactivated.
N
When the TV is operating other applications, it will be deactivated. (ex.
Media Play, PIP, Teletext)
English
Picture Off
t
O
MENU
m
Picture
Picture Off
ENTER
E
The screen is turned off but the sound remains on. Press any button except
volume button to turn on the screen.
Reset Picture
O
MENU
m
Picture
Reset Picture
ENTER
E
Resets your current picture mode to its default settings.
English
Changing the Preset Sound Mode
Sound Mode
O
MENU
m
Sound
Sound Mode
ENTER
E
Standard: Selects the normal sound mode.
Music: Emphasizes music over voices.
Movie: Provides the best sound for movies.
Clear Voice: Emphasizes voices over other sounds.
Amplify: Increase the intensity of high-frequency sound to allow a better
listening experience for the hearing impaired.
N
If Speaker Select is set to External Speaker, Sound Mode is disabled.
English
Adjusting Sound Settings
Sound Effect
(standard sound mode only)
O
MENU
m
Sound
Sound Effect
ENTER
E
DTS TruSurround
This function provides a virtual 5.1 channel surround sound experience
through a pair of speakers using HRTF (Head Related Transfer Function)
technology.
DTS TruDialog
This function allows you to increase the intensity of a voice over background
music or sound effects so that dialogue can be heard more clearly.
English
Equaliser
Use Equaliser to customize sound setting for each speaker.
Balance: Adjusts the balance between the right and left speaker.
100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the
level of specific bandwidth frequencies.
Reset: Resets the equaliser to its default settings.
N
If Speaker Select is set to External Speaker, Sound Effect is disabled.
3D Audio
for PDP 4900 / LED 6 series
O
MENU
m
Sound
3D Audio
ENTER
E
3D audio technology provides the immersive sound corresponding to the pop-up
effect of 3D video by audio depth control in perspective.
N
Available in only when watching 3D image.
English
Speaker Settings
O
MENU
m
Sound
Speaker Settings
ENTER
E
Speaker Select
t
A sound echo may occur due to a difference in decoding speed between
the main speaker and the audio receiver. In this case, set the TV to External
Speaker.
N
When Speaker Select is set to External Speaker, the volume and
MUTE buttons will not operate and the sound settings will be limited.
N
When Speaker Select is set to External Speaker.
TV Speaker: Off, External Speaker: On
N
When Speaker Select is set to TV Speaker.
TV Speaker: On, External Speaker: On
N
If there is no video signal, both speakers will be mute.
English
Auto Volume
To equalize the volume level on each channel, set to Normal.
Night: This mode provides an improved sound experience compared to
Normal mode, making almost no noise. It is useful at night.
N
To use the volume control on the source device connected to the TV,
set Auto Volume to Off on the TV. Otherwise, a change to the volume
control of the source device may not be applied.
English
Additional Settings
O
MENU
m
Sound
Additional Settings
ENTER
E
DTV Audio Level (digital channels only): This function allows you to reduce
the disparity of a voice signal (which is one of the signals received during a
digital TV broadcast) to a desired level.
N
According to the type of broadcast signal, MPEG / HE-AAC can be
adjusted between -10dB and 0dB.
N
To increase or decrease the volume, adjust between the range 0 and -10
respectively.
English
Digital Audio Out: Digital Audio out is used to provide digital sound, reducing
interference going to speakers and various digital devices such as a DVD
player.
Audio Format: You can select the Digital Audio output format. The available
Digital Audio output format may differ depending on the input source.
N
By connecting to 5.1ch speakers in a Dolby Digital setup, maximize your
interactive 3D sound experience.
Audio Delay: Correct audio-video sync problems, when watching TV or
video, and when listening to digital audio output using an external device such
as an AV receiver (0ms ~ 250ms).
English
Dolby Digital Comp: This function minimizes signal disparity between a dolby
digital signal and a voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound).
N
Select Line to obtain dynamic sound, and RF to reduce the difference
between loud and soft sounds at night time.
Line: Set the output level for signals greater or less than -31dB (reference) to
either -20dB or -31dB.
RF: Set the output level for signals greater or less than -20dB (reference) to
either -10dB or -20dB.
Reset Sound
O
MENU
m
Sound
Reset Sound
ENTER
E
Reset all sound settings to the factory defaults.
English
Selecting the Sound Mode
t
When you set to Dual I-II, the current sound mode is displayed on the screen.
Audio Type Dual I-II Default
A2 Stereo Mono Mono Automatic change
Stereo
Stereo
Mono
Dual
Dual I
Dual II
Dual I
NICAM Stereo Mono Mono Automatic change
Stereo
Mono
Stereo
Dual
Mono
Dual I
Dual II
Dual I
N
If the stereo signal is weak and an automatic switching, occurs, then switch
to the mono.
N
Only activated in stereo sound signal.
N
Only available when the Source is set to TV.
English
Preference Features
Executing initial setup
Setup
O
MENU
m
System
Setup
ENTER
E
Configure the channels and the time when setting up the TV for the first time or
when resetting the unit.
N
Execute the initial setup following instructions that the TV guides.
English
Setting the Time
Time
O
MENU
m
System
Time
ENTER
E
The current time will appear every time you press the INFO button.
Clock: Setting the clock is for using various timer features of the TV.
N
If you disconnect the power cord, you have to set the clock again.
Clock Mode: Set up the current time manually or automatically.
Auto: Set the current time automatically using the time from a digital
channel.
N
The aerial must be connected in order to set the time automatically.
Manual: Set the current time manually.
N
Depending on the broadcast station and signal, the auto time set up may
not be correct. In this case, set the time manually.
English
Clock Set: Set the Date and Time.
N
Available only when Clock Mode is set to Manual.
N
You can set the Date and Time directly by pressing the number buttons
on the remote control.
Time Zone (depending on the country): Select your time zone.
N
This function is only available when the Clock Mode is set to Auto.
N
When selecting Manual in Time Zone, GMT and DST will be activated.
Time Offset (depending on the country)
for PDP 4900 Series
: Adjusts the time
when your TV receives the time information via Internet. Set the right time by
selecting an offset.
N
The current time will be set through a network, if the TV fails to receive
the time information including the broadcast signal from TV stations. (ex:
Watching TV via set-top box, Satellite receiver, or etc)
English
Using the Sleep Timer
O
MENU
m
System
Time
Sleep Timer
ENTER
E
Sleep Timer
t
: Automatically shuts off the TV after a preset period of
time. (30, 60, 90, 120, 150 and 180 minutes)
N
Use the
/
buttons to select a period of time, and then press
ENTER
E
. To cancel the Sleep Timer, select Off.
English
Setting the On / Off Timer
O
MENU
m
System
Time
On Timer <or> Off Timer
ENTER
E
On Timer: You can set up three separate On Timer configurations. (On Timer
1, On Timer 2, On Timer 3)
Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or
Manual to set at your convenience. If you select Manual, you can set up the
day you want to activate the timer.
N
The
c
mark indicates the day you’ve selected.
Time: Set the hour and minute.
Volume: Set the desired volume level.
English
Source: To select the source of the content that will play when the TV turns
on. You can:
Select TV and have the TV display a specific air or cable channel.
Select USB and have the TV play back photo or audio files from a USB
device.
Select a source on your TV that you have connected a set-top box to, and
have the TV display a channel from the set-top box.
N
The USB device must be connected to your TV before you can select
USB.
English
N
If you select a source other than TV or USB, you must:
Have a cable or satellite set-top box attached to that source
Set the set-top box to the channel you want to watch when the TV
goes on
Leave the set-top box turned on.
N
When you select a source other than TV or USB, the Aerial and Channel
options will disappear.
Aerial (when the Source is set to TV): Select ATV or DTV.
Channel (when the Source is set to TV): Select the desired channel.
English
Music / Photo (when the Source is set to USB): Select a folder in the USB
device containing music or photo files to be played when the TV is turned on
automatically.
If there is no music file on the USB device or the folder containing a music
file is not selected, the timer function does not operate correctly.
When there is only one photo file in the USB device, the slide show will not
play.
If a folder name is too long, the folder cannot be selected.
Each USB you use is assigned its own folder. When using more than one
of the same type of USB, make sure the folders assigned to each USB
have different names.
English
It is recommended that you use a USB memory stick and a multi card
reader when using On Timer.
The On Timer function may not work with USB devices with a built-in
battery, MP3 players, or PMPs made by some manufacturers because
these devices take a long time to be recognized.
Off Timer: You can set up three separate Off Timer configurations. (Off Timer
1, Off Timer 2, Off Timer 3)
Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or
Manual to set at your convenience. If you select Manual, you can set up the
day you want to activate the timer.
N
The
c
mark indicates the day you’ve selected.
Time: Set the hour and minute.
English
Economical Solutions
Eco Solution
O
MENU
m
System
Eco Solution
ENTER
E
Energy Saving: This adjusts the brightness of the TV in order to reduce
power consumption.
Eco Sensor
for PDP TV / LED 6 series
: To enhance your power savings; the
picture settings will automatically adapt to the light in the room.
N
If you adjust the Backlight
for LED TV
/ Cell Light
for PDP TV
, the Eco
Sensor will be set to Off.
Min. Backlight
for LED TV
/ Min Cell Light
for PDP TV
: When Eco Sensor is
On, the minimum screen brightness can be adjusted manually.
N
If Eco Sensor is On, the display brightness may change (become slightly
darker or brighter) depending on the surrounding light intensity.
English
No Signal Power Off: To avoid unnecessary energy consumption, set how
long you want the TV to remain on if it’s not receiving a signal.
N
Disabled when the PC is in power saving mode.
Auto Power Off: The TV will be automatically turned off when no user
operation is received for 4 hours.
N
If the Auto Power Off option is set to Off, the TV will stay on even if no
operations are performed on the TV.
English
Other Features
Menu Language
O
MENU
m
System
Menu Language
ENTER
E
Set the menu language.
Auto Protection Time
for LED TV
O
MENU
m
System
Auto Protection Time
ENTER
E
If the screen remains idle with a still image for a certain period of time defined by
the user, the screen saver is activated to prevent the formation of ghost images
on the screen.
English
Screen Burn Protection
for PDP TV
O
MENU
m
System
Screen Burn Protection
ENTER
E
To reduce the possibility of screen burn, this unit is equipped with Pixel Shift
screen burn prevention technology. Pixel Shift moves the picture slightly on the
screen. The Time function setting allows you to programme the time between
movement of the picture in minutes.
Your TV also has the following additional screen burn protection functions:
Pixel Shift
Auto Protection Time
Scrolling
Side Grey
English
Pixel Shift: Using this function, you can set the TV to move pixels minutely on
the PDP screen in a horizontal or vertical direction to minimize after images on
the screen.
N
Available Pixel Shift Settings and Optimum Settings
Item TV / HDMI
Horizontal 0~4 4
Vertical 0~4 4
Time (minute) 1~4 min 4 min
N
The Pixel Shift value may differ depending on the monitor size (inches)
and mode.
N
This function is not available in the Screen Fit mode.
Auto Protection Time: If the screen displays a still image for a certain period
of time you define, the TV activates the screen saver to prevent the formation
of burnt in ghost images on the screen.
English
Scrolling: This function removes after-images on the screen by illuminating all
the pixels on the PDP according to a pattern. Use this function when there are
after images or symbols on the screen, especially when you displayed a still
image on the screen for a long time.
N
The after-image removal function has to be executed for a long time
(approximately 1 hour) to effectively remove after-images on the screen.
If the after-image is not removed after you apply the function, repeat the
function again.
N
Press any key on the remote control to cancel this feature.
Side Grey: When you watch TV with the screen ratio set to 4:3, using the
Side Grey function can prevent damage to the edges of the screen by
adjusting the white balance on the extreme left and right sides.
English
General
O
MENU
m
System
General
ENTER
E
Game Mode: When connecting to a game console such as PlayStation™ or
Xbox™, you can enjoy a more realistic gaming experience by selecting game
mode.
N
NOTE
Precautions and limitations for game mode
To disconnect the game console and connect another external
device, set Game Mode to Off in the setup menu.
If you display the TV menu in Game Mode, the screen shakes
slightly.
Game Mode is not available in TV mode.
After connecting the game console, set Game Mode to On.
Unfortunately, you may notice reduced picture quality.
English
If Game Mode is On:
Picture Mode is set to Standard and Sound Mode is set to
Movie.
Panel Lock: Lock or unlock all the keys on the panel.
Boot Logo: Display Samsung logo when the TV is turned on.
Change PIN
O
MENU
m
System
Change PIN
ENTER
E
Change your password required to set up the TV.
N
The PIN input screen appears before the setup screen.
N
Enter your 4-digit PIN. Change the PIN using the Change PIN option.
English
DivX® Video On Demand
O
MENU
m
System
DivX® Video On Demand
ENTER
E
Shows the registration code authorized for the TV. If you connect to the DivX
web site and register with 10-digit registration code, you can download the VOD
activation file.
Once you play it using Videos, the registration is completed.
N
For more information on DivX® VOD, visit http://vod.divx.com.
English
Advanced Features
Using the Source List
Source List
O
MENU
m
Applications
Source List
ENTER
E
N
When you press the SOURCE button, Source screen will be displayed at
once.
N
You can only choose external devices that are connected to the TV. In
Source, connected inputs are highlighted.
N
For the detailed information, refer to “Changing the Input Source” in User
Manual.
English
Connecting a USB Device
1. Turn on your TV.
2. Connect a USB device containing photo, music and movie files to the USB
port on the side of the TV.
3.
When USB is connected to the TV, popup window appears. You can select
the Photos, Videos or Music directly.
English
N
It might not work properly with unlicenced multimedia files.
N
Need-to-Know List before using Media Contents
MTP (Media Transfer Protocol) is not supported.
Supported file systems are FAT and exFAT.
Certain types of USB Digital camera and audio devices may not be
compatible with this TV.
Media Contents only supports sequential jpeg format.
Media Contents only supports USB Mass Storage Class (MSC) devices.
MSC is a Mass Storage Class Bulk-Only Transport device. Examples
of MSC are Thumb drives, Flash Card Readers (USB HUB are not
supported). Devices should be connected directly to the TV’s USB port.
English
Before connecting your device to the TV, please back up your files to
prevent them from damage or loss of data. SAMSUNG is not responsible
for any data file damage or data loss.
The HDD (Hard Disk Drive) connected to USB is not supported.
Do not disconnect the USB device while it is loading.
The higher the resolution of the image, the longer it takes to display on
the screen.
The maximum supported JPEG resolution is 15360 x 8640 pixels.
For unsupported or corrupted files, the “Not Supported File Format”
message is displayed.
The scene search and thumbnail functions are not supported in the
Videos.
English
MP3 files with DRM that have been downloaded from a non-free site
cannot be played. Digital Rights Management (DRM) is a technology that
supports the creation, distribution and management of the content in an
integrated and comprehensive way, including the protection of the rights
and interests of the content providers, the prevention of the illegal copying
of contents, as well as managing billings and settlements.
PTP connection mode is fully available only with digital cameras. When
connecting a smartphone or tablet to the TV using PTP mode, it may not
be recognized.
A USB device that requires high power (more than 500mA or 5V) may not
be supported.
If the TV has been no input during time set in Auto Protection Time, the
screen saver will run.
English
The power-saving mode of some external hard disk drives may be
released automatically when connected to the TV.
If a USB extension cable is used, the USB device may not be recognized
or the files on the device may not be read.
If a USB device connected to the TV is not recognized, the list of files on
the device is corrupted or a file in the list is not played, connect the USB
device to the PC, format the device and check the connection.
If a file deleted from the PC is still found when Media Contents is run, use
the “Empty the Recycle Bin” function on the PC to permanently delete the
file.
If the number of files and folders saved on a USB storage device is
approximately over 4000, the files and folders may not appear and some
folders may not be opened.
English
Disconnecting a USB Device
1.
Press the SOURCE button.
2.
Select a desired USB device, and then press the TOOLS button. The Tools
menu appears.
3.
Select Disconnect USB Device, and then wait until the selected USB device
is disconnected. You can remove a USB device from the TV.
N
To remove a USB device from the TV, we recommend use Disconnect USB
Device function.
English
Using the Media Contents
O
MENU
m
Applications
Media Play
ENTER
E
Enjoy photos, music and movie files saved on a USB Mass Storage Class (MSC)
device.
1.
Press the MEDIA.P button.
2.
Press
◄/►
button to select desired menu (Photos, Videos, Music), then
press the ENTER
E
button.
3.
Press
◄/►
button to select desired device, then press the ENTER
E
button
again.
4.
Press the
▲/▼/◄/►
button to select the desired file in the list, then press the
ENTER
E
button or
(Play) button.
English
Playing the selected files
1.
Press the
button to select Options at the top of each main screen and
select Play Selected.
2.
Select the desired files.
N
The check box appears to the left of the selected files.
N
Press ENTER
E
button again to deselect the file.
3.
Press the
button to select Play.
N
You can select or deselect all files pressing the Select All / Deselect All.
English
Playing the Photos / Videos / Music
During playing a file, press the
▲/▼/◄/►
button to select the desired menu.
N
When the option menu is not displayed, press the TOOLS button or
ENTER
E
button.
N
You can also use
/
/
/
π
/
µ
buttons on the remote control during
playback.
N
If you press the INFO button during playback, you can view the playback
information.
English
Playback menu
Button Operation Photos Videos Music
/
Previous / Next
/
Start Slide Show / Stop Slide Show
Play / Pause
Mini Player*
/
Previous / Next
Mini Player*
/
Rewind / Fast forward
* When setting the Background Music to Mini Player in Photos, these buttons appear.
English
Setting menu
Photos
Button Operation
Slideshow Settings You can set the Speed and Effects during the slide show.
Zoom You can zoom into images in full screen mode.
Rotate You can rotate images in full screen mode.
Background Music /
Mini Player
You can set background music when watching a slide show. /
You can control simple playback menus.
Settings Picture Mode / Sound Mode: You can adjust the picture or
sound setting.
Information: You can see detailed information about the played
file.
English
N
During the slide show, all files in the file list will be displayed in order.
N
When you press the
(Play) button (or
button
Options
Slide
Show) in the file list, slide show will be started immediately.
N
During the slide show, you can adjust the slide show speed using
π
(REW)
or
µ
(FF) button.
Supported Photo Formats
N
For the details, refer to “Specifications” in User Manual.
English
Videos
Button Operation
Search Search Titles: You can move the other file directly.
Search Time Bar: You can search the video using
and
button
at one minute interval or entering the number directly.
N
It may not be supported depending on the input source.
Repeat Mode You can play movie files repeatedly.
Picture Size You can adjust the picture size to your preference.
Settings Subtitle Settings: You can play the video with subtitles. This function
only works if the subtitles are the same file name as the video.
Picture Mode / Sound Mode: You can adjust the picture or sound
setting.
Audio Language: You can change the audio language if the video
has more than one language.
Information: You can see detailed information about the played file.
English
N
If video time information is unknown, play time and progress bar are not
displayed.
N
In this mode, you can enjoy movie clips contained on a Game, but you
cannot play the Game itself.
Supported Subtitle / Video Formats
N
For the details, refer to “Specifications” in User Manual.
English
Music
Button Operation
Repeat You can play music files repeatedly.
Shuffle You can play the music randomly.
Sound Mode You can adjust the sound setting.
N
Only displays the files with supported music file extension. Other file
extensions are not displayed, even if they are saved on the same USB device.
N
If the sound is abnormal when playing music files, adjust the Equaliser in the
Sound menu. (An over-modulated music file may cause a sound problem.)
Supported Music Formats
N
For the details, refer to “Specifications” in User Manual.
English
Setting the Encoding language
Set the encoding language if the text is not supported.
1.
Press the
button to select Options at the top of music main screen and
select Encoding.
2.
Select the desired encoding language.
English
Using the 3D function
for PDP 4900 / LED 6 series
Viewing TV using the 3D function
IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES.
Read and understand the following safety information before using the TV’s 3D
function.
[
WARNING
Some viewers may experience discomfort while viewing 3D TV such as
dizziness, nausea and headaches. If you experience any such symptom,
stop viewing 3D TV, remove 3D Active Glasses and rest.
Watching 3D images for an extended period of time may cause eye
strain. If you feel eye strain, stop viewing 3D TV, remove your 3D Active
Glasses and rest.
English
A responsible adult should frequently check on children who are using the
3D function. If there are any reports of tired eyes, headaches, dizziness,
or nausea, have the child stop viewing 3D TV and rest.
Do not use the 3D Active Glasses for other purposes (such as general
eyeglasses, sunglasses, protective goggles, etc.)
Do not use the 3D function or 3D Active Glasses while walking or moving
around. Using the 3D function or 3D Active Glasses while moving around
may result in injuries due to running into objects, tripping, and/or falling.
Before using 3D function...
3D Active Glasses from Samsung’s previous product (IR type) or other
manufacturers not be supported.
When the TV is initially powered on, may take some time until the 3D display
is optimized.
English
The 3D Active Glasses may not work properly if there is any other 3D product
or electronic devices turned on near the glasses or TV. If there is a problem,
keep other electronic devices as far away as possible from the 3D Active
Glasses.
Be sure to stay within the viewing angle and optimum TV viewing distance
when watching 3D pictures. Otherwise, you may not be able to enjoy proper
3D effects.
The ideal viewing distance should be three times or more the height of the
screen. We recommend sitting with viewer’s eyes on a level with the screen.
If you can not play 3D videos in some of the BD players, take out the disk
from player and put it again, or restart the BD player.
English
3D
O
MENU
m
Picture
3D
ENTER
E
This exciting new feature enables you to view 3D content.
N
"Full HD 3D Glasses™" Logo indicates compatibility between display
products and 3D Glasses which are compliant with the "Full HD 3D
Glasses™" format, and does not indicate picture quality of display products.
N
Some 3D modes may not be available depending on the format of the image
source.
N
When you watch 3D images under flickering lighting such as a fluorescent
lamp (50Hz ~ 60Hz) or a 3 wavelength lamp, you may notice some screen
flickering. If this occurs, dim or turn off the light.
English
3D Mode
If you want to feel the 3D effect fully, please wear the 3D Active Glasses
first, and then select 3D Mode from the list below that provides the best 3D
viewing experience.
3D Mode Operation
Off
Off
Off Turns the 3D function off.
2D
3D
Changes a 2D image to 3D.
N
Some file format may not be supported.
Side by Side Displays two images next to each other.
Top & Bottom Displays one image above another.
N
3D Mode is set to Off automatically when you access Media Play or
e-Manual functions.
N
3D Mode is set to memorised configuration value automatically, when
changing the input source.
English
3D Perspective: Adjust overall 3D perspective of on-screen image.
Depth: Adjust overall depth.
L/R Change: Swap the left and right pictures.
3D
2D: Displays the image for the left eye only.
N
This function is deactivated when 3D Mode set to “ ” or “
Off
Off
”.
Support resolution (16:9 only)
HDMI
Source Resolution Frequency (Hz)
/
1280 x 720p 50 / 59.94 / 60 Hz
1920 x 1080i 50 / 59.94 / 60 Hz
1920 x 1080p 23.98 / 24 / 25 / 29.97 / 30 / 50 / 59.94 / 60 Hz
Frame Packing 1280 x 720p 50 / 59.94 / 60 Hz
1920 x 1080i 50 / 59.94 / 60 Hz
1920 x 1080p 23.98 / 24 / 25 / 29.97 / 30 Hz
English
Components & DTV
Source Resolution Frequency (Hz)
Components 1280 x 720p 50 / 59.94 / 60 Hz
1920 x 1080i 50 / 59.94 / 60 Hz
1920 x 1080p 23.98 / 24 / 25 / 29.97 / 30 / 50 / 59.94 / 60 Hz
DTV 1280 x 720p 50 / 59.94 / 60 Hz
1920 x 1080i 50 / 59.94 / 60 Hz
1920 x 1080p 25 Hz
Videos / Photos (In Media Play)
For the details, refer to “Specifications” in User Manual.
English
Viewing the e-Manual
e-Manual
O
MENU
m
Support
e-Manual
ENTER
E
You can read the introduction and instructions about the TV features stored in
your TV.
N
For the detailed information about e-Manual Screen, refer to “How to use the
e-Manual” in User Manual.
Other Features
English
Using the Self Diagnosis
Self Diagnosis
O
MENU
m
Support
Self Diagnosis
ENTER
E
Self Diagnosis might take few seconds, this is part of the normal operation of
the TV.
Picture Test: Use to check for picture problems.
Sound Test: Use the built-in melody sound to check for sound problems.
N
If you hear no sound from the TV’s speakers, before performing the
sound test, make sure Speaker Select is set to TV Speaker in the
Sound menu.
N
The melody will be heard during the test even if Speaker Select is set to
External Speaker or the sound is muted by pressing the MUTE button.
English
Signal Information (digital channels only): HDTV channel’s reception quality
is either perfect or the channels are unavailable. Adjust your aerial to increase
signal strength.
Reset: Reset all settings to the factory defaults except network settings.
N
The PIN input screen appears before the setup screen.
N
Enter your 4-digit PIN. Change the PIN using the Change PIN option.
English
Updating the Software
Software Update
O
MENU
m
Support
Software Update
ENTER
E
The Software Update menu lets you upgrade your TV’s software to the latest
version.
Current version: This is the software version already installed in the TV.
N
When software is upgraded, video and audio settings you have made will
return to their default settings. We advise you to write down your settings so
that you can easily reset them after the upgrade.
English
Update now
By USB: Insert a USB drive containing the firmware upgrade file,
downloaded from “www.samsung.com” into the TV.
N
Please be careful not to disconnect the power or remove the USB
drive until upgrades are complete. The TV will be turned off and on
automatically after completing the firmware upgrade.
By Channel: Upgrade the software using the broadcasting signal.
N
If the function is selected during the software transmission period,
software will be automatically searched and downloaded.
N
The time required to download the software is determined by the
signal status.
Auto update: A manual upgrade will be automatically performed at selected
time. Since the power of the unit is turned on internally, the screen may be
turned on slightly for the product. This phenomenon may continue for more
than 1 hour until the software upgrade is complete.
English
Changing the Use Mode
Use Mode
O
MENU
m
Support
Use Mode
ENTER
E
Select the Use Mode suitable for your place. We strongly recommend you select
Home Use.
Home Use: Home Use is the default setting.
Store Demo: Store Demo is for retail environments only. If you select Store
Demo, some functions will not work, and the picture settings will be reset
every 30 minutes.
English
Viewing the Contact Samsung
Contact Samsung
O
MENU
m
Support
Contact Samsung
ENTER
E
View this information when your TV does not work properly or when you want to
upgrade the software. You can find information regarding our call centres, and
how to download products and software.
English
Using the Sports Mode
Sports Mode
t
O
MENU
m
Applications
Sports Mode
ENTER
E
This mode provides optimized condition for watching sports games.
N
When the sports mode is on, the picture and sound modes are set to
Stadium automatically.
N
If you turn the TV off while watching Sports Mode, the Sports Mode will be
disable.
English
Using the Satellite System
for LED 6170 series
Auto Tuning
O
MENU
m
Broadcasting
Auto Tuning
ENTER
E
When Aerial Source is set to Satellite
Channel Type: Select the Channel Type to memorise.
Satellite: Selects the satellite to scan. The option may differ depending on
country.
Scan Mode: Select a scan mode for the selected satellite.
Re-initialise: Selects the scanning mode of the selected satellite.
N
This function is available after connecting to satellite aerial and set
the channels.
Search Mode: Sets search mode using up/down buttons.
English
Manual Tuning
O
MENU
m
Broadcasting
Channel Settings
Manual Tuning
ENTER
E
Scan Satellite
Transponder: Selects the transponder using the up/down buttons.
Scan Mode: Selects either free or all channels to store.
Network Search: Select to search network or not.
Signal Quality: Display the current status of broadcasting signal.
N
Information on a satellite and its transponder is subject to change
depending on the broadcasting conditions.
N
When setting is completed, move to Search and press the ENTER
E
button. Channel scan is started.
English
Satellite System
O
MENU
m
Broadcasting
Channel Settings
Satellite System
ENTER
E
The PIN input screen appears. Enter your 4 digit PIN number. Satellite
System is available when Aerial is set to Satellite. Before running Auto
Tuning, set Satellite System. Then channel scan is run normally.
Satellite Selection: You can choose the satellites for this TV.
LNB Power: Enables or disables the power supply for the LNB.
English
LNB Settings: Configures the outdoor equipment.
N
It is available when LNB Power is set to On.
Satellite: Selects the satellite for receiving digital broadcasts.
Transponder: Selects a transponder from the list or adds a new
transponder.
DiSEqC Mode: Selects DiSEqC mode for the selected LNB.
Lower LNB Oscillators: Sets the LNB oscillators to a lower frequency.
Upper LNB Oscillators: Sets the LNB oscillators to a higher frequency.
Tone 22 kHz: Selects the Tone 22 kHz depending on the LNB type. For a
universal LNB it should be Auto.
Signal Quality: Display the current status of broadcasting signal.
English
SatCR/Unicable Settings: Configure single cable installation.
N
SatCR is short for satellite channel router.
N
This function may not support depending on the country.
SatCR/Unicable: Enables or disable single cable installation support.
Positioner Settings: Configures the aerial positioner.
N
It is available when LNB Power is set to On.
Positioner: Enables or disables the positioned control.
Positioner Type: Sets the positioned type between DiSEqC 1.2 and
USALS(Universal Satellite Automatic Location System).
My Longitude: Sets the longitude for my location.
My Latitude: Sets the latitude for my location.
Satellite Longitude Settings: Sets the longitude of user defined
satellites.
English
User Mode: Sets the position of satellite aerial according to each satellite.
If you store the current position of satellite aerial according to a certain
satellite, when the signal of that satellite is needed, the satellite aerial can
be moved to pre-populated position.
Satellite: Selects the satellite to set the position for.
Transponder: Selects a transponder from the list for signal reception.
Moving Mode: Selects the movement mode between discrete and
continuous movement.
Step Size: Adjusts the step size degrees for the aerial rotation. It is
available when Moving Mode is set to Step.
English
Go To Stored Position: Rotates the aerial to the stored satellite
position.
Aerial Position: Adjusts and stores the aerial position for the selected
satellite.
Store Current Position: Stores current position as the selected
positioner limit.
Signal Quality: Display the current status of broadcasting signal.
English
Installer Mode: Sets limits to the scope of movement of satellite aerial or
reset the position. Generally, installation guide uses this function.
Limit Position: Selects the direction of the positioner Limit.
Aerial Position: Adjusts and stores the aerial position for the selected
satellite.
Store Current Position: Stores the current position as the selected
positioner Limit.
Go to zero: Moves the aerial to the reference position.
Reset positioner limit: Allows the aerial to rotate over the full arc.
Reset all settings: All satellite settings will be reset to the initial values.
English
Using the Wireless Network
for PDP 4900 series
Using wireless IP sharer (router or modem), you can connect your TV to the
wireless network.
N
For detailed settings for wireless network connection, refer to the User
Manual.
N
NOTE
To use a wireless network, your TV must be connected to a wireless IP
sharer (either a router or a modem). If the wireless IP sharer supports
DHCP, your TV can use a DHCP or static IP address to connect to the
wireless network.
Select a channel for the wireless IP sharer that is not currently being used.
If the channel set for the wireless IP sharer is currently being used by
another device nearby, this will result in interference and communication
failure.
English
You need to change the wireless router's security settings to AES. WEP
security settings don't support WPS Connection.
If HIGH PURE THROUGHPUT (Greenfield) 802.11n mode is selected and
the Encryption type is set to WEP for your wireless router, Samsung TVs
will not support a connection in compliance with new Wi-Fi certification
specifications.
If your wireless router supports WPS (Wi-Fi Protected Setup), you can
connect to the network via PBC (Push Button Configuration) or PIN
(Personal Identification Number). WPS will automatically configure the
SSID and WPA key in either mode.
English
If your router, modem, or device is not certified, it may not connect to the
TV via the “Samsung Wireless LAN Adapter”.
Connection Methods: You can setup the wireless network connection like
below.
Auto Setup (Using the Auto Network Search function)
Manual Setup
WPS(PBC)
Wi-Fi Direct
English
Ensure the TV is turned off before you connect the Samsung Wireless
LAN Adapter.
The Samsung Wireless LAN Adapter may not be recognized when using
a connection via a USB hub or via a USB extension cable other than the
cable supplied.
You must use the “Samsung Wireless LAN Adapter” (WIS12ABGNX,
WIS09ABGNX) to use a wireless network. Samsung Wireless LAN
Adapter and the USB extension Cable are sold separately and are offered
by select retailers and Ecommerce sites.
English
How to connect the Samsung Wireless LAN Adapter
1
Connect using the USB right angle adapter.
2
Connect via an extension cable
1 2
N
The picture may appear corrupted or have static for some channels when
the TV is connected to the Samsung Wireless LAN Adapter. In such a case,
connect the Samsung Wireless LAN Adapter using a USB cable in a place
that is not affected by radio interference.
N
The position of port may differ depending on the model.
English
Network Status
O
MENU
m
Network
Network Status
ENTER
E
You can check the current network and Internet status.
Network Settings
O
MENU
m
Network
Network Settings
ENTER
E
Set the network connection to use AllShare™.
N
The Internet can't be used other than content sharing via AllShare™.
English
Auto Network Setup
Most wireless networks have an optional security system that requires devices
that access the network to transmit an encrypted security code called an Access
or Security Key. The Security Key is based on a Pass Phrase, typically a word or a
series of letters and numbers of a specified length you were asked to enter when
you set up wireless security for your wireless network. If you use this method of
setting up the network connection, and have a Security Key for your wireless
network, you will have to enter the Pass Phrase during the setup process.
N
When connecting Samsung Wireless LAN Adapter, the screen pop-up
appears directly to set wireless network.
English
1. Go to Network Settings screen.
(Network
Network Settings)
2.
The Network function searches for available wireless networks. When done, it
displays a list of the available networks.
3.
In the list of networks, press the
or
button to select a network, and then
press ENTER
E
button.
N
If the wireless router is set to Hidden (Invisible), you have to select Add
Network and enter the correct network name and Security key to
establish the connection.
4.
If the Security screen pop-up appears, go to step 6. The wireless router which
does not have wireless security, go to step 7.
English
5. Enter the security key using
▲/▼/◄/►
buttons, and then select Done.
N
You can also enter numbers by pressing the number buttons
N
You should be able to find the Pass Phrase on one of the set up screens
you used to set up your router or modem.
6.
The network connection screen appears, and network setting is done.
N
If it fails to set Security key (Security or PIN), select Retry or IP Settings.
N
If you want to set connection manually, select the IP Settings. Refer to
following “How to set up manually”.
N
If you select Change Network, you can select other wireless networks.
English
How to set up WPS(PBC)
If your router has a WPS(PBC) button, follow these steps:
1.
The Network function searches for available wireless networks. When done, it
displays a list of the available networks.
2.
Select the WPS(PBC).
3.
Press the WPS(PBC) button on your router within 2 minutes. Your TV
automatically acquires all the network setting values it needs and connects to
your network.
4.
The network connection screen appears, and network setting is done.
English
Manual Network Setup
Use the Manual Network Setup when connecting your TV to a network that
requires a Static IP address.
N
You can find the network connection values in control panel of Windows
computers.
How to set up manually
To set up your TV’s cable network connection manually, follow these steps:
1.
Select the IP Settings on network connection screen.
N
When it fails to connect the network automatically, the IP Settings is
available to select.
2.
Set IP setting to Enter manually.
3.
Move to each field using
▲/▼/◄/►
buttons. Enter the network connection
values, and then select OK.
4.
The network connection screen appears, and network setting is done.
English
The check list for wireless network connection failure
When wireless network connection failed, try to apply the following information to
each issue.
Issues Solutions and Explanations
Wireless network
connection failed.
• No wireless router selected. Go to Network Settings to select your
router.
• Samsung Wireless LAN adapter is required to use a wireless network.
• Make sure the TV is connected to a wireless IP sharer (Router).
IP auto setting failed. • Try the following to set your IP address automatically or set your IP
address manually by selecting IP Settings.
• Ensure DHCP server is enabled on router and unplug and re-plug-in the
router.
• Check if you need to enter a security key to use the router.
• Contact your Internet Service Provider for more information.
English
Issues Solutions and Explanations
Unable to connect to
wireless router.
• Check that the router is turned on, and if it is on, try turning it off and
on again.
• Check if you need to enter a security key to use the router.
Unable to connect to the
network.
• Check if your IP address is set correctly in IP Settings.
• Check if you need to enter a security key to use the router.
• Contact your Internet Service Provider for more information.
Connected to your local
network, but cannot
connect to the Internet.
• Check your Internet LAN cable is connected correctly to LAN port of
router.
• Check the DNS settings in IP Settings.
• If the problem persists, contact your Internet Service Provider to
access the Internet.
Network setup complete,
but cannot connect to the
Internet.
• Confirm that your router is connected to the Internet.
• If the problem persists, contact your Internet Service Provider to
access the Internet.
English
Using the Wired Network
UK only
Wired Network Connection
You can attach your TV to your LAN using cable in three ways:
Connecting the LAN port on your TV to an external modem
Connecting the LAN port on your TV to a IP Sharer which is connected to an
external modem
Connecting the LAN port on your TV directly to a network wall outlet
N
To use this way, wall outlet is attached to a modem or router elsewhere in
your house.
N
For detailed settings for wired network connection, refer to the User Manual.
English
If your network requires a Dynamic IP address, you should use an ADSL
modem or router that supports Dynamic Host Configuration Protocol (DHCP).
Modems and routers that support DHCP automatically provide the IP
address, subnet mask, gateway, and DNS values your TV needs to access
the Internet so you do not have to enter them manually. Most home networks
use a Dynamic IP address. Some networks require a Static IP address. If your
network requires a Static IP address, you must enter the IP address, subnet
mask, gateway, and DNS values manually on your TV’s Cable Setup Screen
when you set up the network connection. To get the IP address, subnet
mask, gateway, and DNS values, contact your Internet Service Provider (ISP).
If you have a Windows computer, you can also get these values through your
computer.
N
You can use ADSL modems that support DHCP if your network requires
a Static IP address. ADSL modems that support DHCP also let you use
Static IP addresses.
English
Network Setup
Use the Automatic Network Setup when connecting your TV to a network that
supports DHCP. To set up your TV’s cable network connection automatically,
follow these steps:
1.
Go to Network Status screen.
(Network
Network Status)
2.
You can check the connected status on the screen.
N
If it fails to set automatically, check the connection of LAN port.
English
N
If you cannot find network connection values or if you want to set connection
manually:
1.
Select the IP Settings on Network Status screen.
N
When it fails to connect the network automatically, the IP Settings is
available to select.
2.
Set IP setting to Enter manually.
3.
Move to each field using
▲/▼/◄/►
buttons. Enter the network
connection values, and then select OK.
4.
The network connection screen appears, and network setting is done.
English
The check list for wired network connection failure
When wired network connection failed, try to apply the following information to
each issue.
Issues Solutions and Explanations
No network cable
found.
• Check that your network cable is plugged in.
• If it is connected, make sure that the router is turned on; if it is on, try
turning it off and on again.
IP auto setting failed. Try the following to set your IP address automatically or set your IP address
manually by selecting IP Settings.
• Ensure DHCP server is enabled on router and unplug and re-plug-in the
router.
• Contact your Internet Service Provider for more information.
English
Issues Solutions and Explanations
Unable to connect to the
network.
• Check if your IP address is set correctly in IP Settings.
• Contact your Internet Service Provider for more information.
Connected to your local
network, but cannot
connect to the Internet.
• Check your Internet LAN cable is connected correctly to LAN port of
router.
• Check the DNS settings in IP Settings.
• If the problem persists, contact your Internet Service Provider to
access the Internet.
Network setup complete,
but cannot connect to the
Internet.
• Confirm that your router is connected to the Internet.
• If the problem persists, contact your Internet Service Provider to
access the Internet.
English
If Your TV Fails to Connect to the Internet
Your TV may not be able to connect to the Internet because your ISP has permanently
registered the MAC address (a unique identifying number) of your PC or modem, which
it then authenticates each time you connect to the Internet as a way of preventing
unauthorized access. As your TV has a different MAC address, your ISP can not
authenticate its MAC address, and your TV can not connect.
To resolve this problem, ask your ISP about the procedures required to connect devices
other than a PC (such as your TV) to the Internet.
If your Internet service provider requires an ID or password to connect to the Internet,
your TV may not be able to connect to the Internet. If this is the case, you must enter
your ID or password when connecting to the Internet.
The internet connection may fail because of a firewall problem. If this is the case, contact
your Internet service provider.
If you cannot connect to the Internet even after you have followed the procedures of your
Internet service provider, please contact Samsung Electronics.
English
Managing the Network Connected Devices
for PDP 4900 series
Wi-Fi Direct
O
MENU
m
Network
Wi-Fi Direct
ENTER
E
Set to connect the TV to wireless mobile devices. Using this function, you can
connect wireless mobile devices with your TV directly without a wireless router.
N
You can use this function when connecting the Samsung Wireless LAN
Adapter.
N
It only supports Media Play function.
N
It may not be supported depending on the mobile device.
English
How to connect the device to your TV using Wi-Fi Direct function
N
Using this function, you must turn on Wi-Fi Direct function on your device.
1.
Go to Wi-Fi Direct screen. The TV starts to search devices.
(Network
Wi-Fi Direct)
2.
Select the desired device, and then press the ENTER
E
button.
3.
When connection message appears on your device, let you allow it. Your TV
automatically acquires all the network setting values it needs and connects to
your network.
N
If you want to disconnect the device, select the connected device, and press
the ENTER
E
button to select Disconnect.
English
AllShare Settings
O
MENU
m
Network
AllShare Settings
ENTER
E
Set whether to allow a network connected device like a smartphone or tablet
to share content or control TV using an application downloaded on your mobile
device. For details, refer to the “Using the AllShare Settings function”.
Device Name
O
MENU
m
Network
Device Name
ENTER
E
Change the TV’s name.
N
When selecting User Input, you can key in a name for your TV manually. Use
▲/▼/◄/►
buttons to select characters, and then select Done.
English
Using the DLNA Functions
for PDP 4900 series
N
This model only supports DLNA functions in AllShare™.
You can play media contents including videos, photos and music saved on your
mobile phones or the other devices (such as your PC) by controlling them on the
TV via the network.
N
First, configure your network. For detailed procedures on using the Network
Setup, refer to the “Network Settings” instructions.
N
For more information, visit “www.samsung.com” or contact the Samsung call
centre. Mobile devices may need additional software installation. For details,
refer to each device’s user’s guide.
N
If your Samsung TV connects to a non-Samsung DLNA server, a compatibility
issue may occur during video playback.
English
N
By connecting your Samsung TV to a network via AllShare™, you can use
Samsung’s original functions as follows:
Playback of various video formats (DivX, MP4, 3GPP, AVI, ASF, MKV,
etc.)
Bookmark function (to resume video playback)
Auto-chaptering (scene navigation)
Digital content management
Compatibility with various subtitle formats (SRT, SMI, SUB, TXT, TTXT)
And many others
N
To use the original DLNA functions of Samsung fully, it is recommended that
you use the AllShare™ software provided with your TV.
English
Playing the media contents saved on the devices
1.
Connect the mobile phone or other devices which support AllShare™
function, and then play the media contents of each device. The popup screen
appears on the bottom of your TV.
2.
Select the Allow to accept the connected devices. The media contents of the
devices can be playing on your TV.
N
You can find the allowed devices on the AllShare Settings.
English
Using the Media Play function, play the media contents of the devices connected
to DLNA function.
1.
Press the MEDIA.P button to select Media Play.
2.
Press
/
button to select desired menu (Videos, Photos, Music), then
press the ENTER
E
button.
3.
When the DLNA device is selected, press the ENTER
E
button again.
4.
Press the
/
▼/◄
/
button to select the desired file.
5.
Press the ENTER
E
button.
English
N
NOTE
Contents may not be played on your TV depending on their resolution
and format.
The ENTER
E
and
◄/►
buttons may not work depending on the type
of media content.
Using the mobile device, you can control the media playing. For details,
refer to each mobile’s user’s guide.
English
Using the AllShare Settings function
O
MENU
m
Network
AllShare Settings
Content Sharing
ENTER
E
Shows a list of mobile phones or connected devices which have been set up with
this TV for using the AllShare Settings function.
N
The AllShare Settings function is available in all devices which support DLNA
DMC.
Allow / Deny: Allows/Blocks the devices.
Delete: Deletes the devices from the list.
N
This function only deletes the name of the devices from the list. If the
deleted device is turned on or tries to connect to the TV, it may appear
on the list again.
English
Connecting to the PC through network
You can play pictures, music and videos saved on your PC through a network
connection in the Media Play mode over your TV.
N
If you want to use Media Play to play files saved on your PC over your TV,
you should download “AllShare PC Software” and users manual from “www.
samsung.com”.
1.
For more information on how to configure your network, refer to theNetwork
Settings”.
You are recommended to locate both TV and PC in same subnet. The
first 3 parts of the IP address of the TV and PC should be the same and
only the last part (the host address) should be changed. (e.g. IP Address:
123.456.789.**)
English
2. Connect the PC on which you will install or have installed AllShare PC
software and your TV to the same network.
N
Functions that are not supported when connecting to a PC through a
network:
Background music when watching a slide show.
The
π
(REW) or
µ
(FF) button while a movie is playing.
N
The DivX DRM, Multi-audio, embedded caption does not supported.
N
AllShare PC Software should be permitted by the firewall programme on your
PC.
English
N
When you use Media Play mode through a network connection, according
to functions of the provided server:
The sorting method may vary.
The
π
(REW),
µ
(FF) or
(Pause) buttons may not work depending
on the content information.
N
When playing the video through network, it may not work depending on the
network status. When you play video over a network connection, the video
may not be played smoothly.
English
36

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Samsung-UE32F4000

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Samsung UE32F4000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Samsung UE32F4000 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,88 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Samsung UE32F4000

Samsung UE32F4000 Gebruiksaanwijzing - Nederlands - 111 pagina's

Samsung UE32F4000 Gebruiksaanwijzing - Deutsch - 151 pagina's

Samsung UE32F4000 Gebruiksaanwijzing - Espanõl - 151 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info