SAM4S NR-500 Series Manual Program Mode Programming • 131
Group Programming
Up to 99 groups (the exact number is determined by memory allocation) are available to
summarize PLU sales. Group totals appear on reports, so that you can track sales of
different types of items.
The group descriptors programmed here will replace the default descriptors
GROUP 1 through GROUP 99 that appear on reports.
Each PLU can report totals to one, two or three different groups. If a
PLU sends totals to more than one group, the group total that appears on
the Group report will not represent PLU sales. Therefore, you also have
the option of deciding whether each group's total will add to the group total
on the Group report.
To Program Groups
1. At the PROGRAM MODE, press 2 and CASH for GROUP. The GROUP
PROGRAMMING screen displays: (The maximum group number is set by
memory allocation.)
GROUP
ENTER GROUP #
(1-10) 0
2. Enter the number of the group to be programmed, press the CASH. The
GROUP# PROGRAMMING screen displays:
GROUP
1.DESC : [GROUP 01]
2.ADD TO GROUP TOTAL [Y]
3.SEND TO KP [N]
4.KP PORT#: RCPT [N]
5.KP PORT#: 1 [N]
6.KP PORT#: 2 [N]
GROUP
7.PRINT RED ON KP [N]
3. Press the ↑ key and the↓ key to select menu and press the CASH key to
confirm. You can also select menu by page↑key and page↓ key. Select the
Group option you wish to program.
4. Press the ↑ key for YES and the ↓ key for NO.
Press CLEAR to return to the GROUP PROGRAMMING screen. Continue
to program groups as necessary. Press CLEAR to return to the PROGRAM
MODE screen.