621307
35
Verklein
Vergroot
Pagina terug
1/70
Pagina verder
English _35
SETUP SCREEN
Audio setup
You can configure the I/O settings of the audio source from the camera.
1. From the Setup menu, select the <Video & Audio (
)>
tab.
2. Click <Audio setup>.
3. Set the audio input value.
Source : Sets the audio input.
- Line : Connect the cable to the audio device.
- External microphone : 3.5 pi(¢) jack type external MIC.
Apply power to Ext. Mic. : If the external microphone
connected has no separate power supply, check this
option to set camera to supply power to the connected external microphone. The option is enabled if
<External microphone> is selected.
Codec : Specify the audio codec.
- G.711 : A audio codec standard, it uses 64 Kbps PCM (Pulse Code Modulation) encoding.
ITU standard audio codec that is adequate for digital voice transfer in PSTN network or through a
PBX.
- G.726 : ITU standard audio codec applying ADPCM (Adaptive Differential Pulse Code Modulation) for
variable bit rates of 40/32/24/16 Kbps to 64 Kbps PCM encoding.
Bitrate : Set the bit rate to differentiate compression ratio if using G.726 codec.
Gain : Specify the audio input amplification.
J
`
Sound quality deterioration or howling may occur if the loudness of the sound source or gain value were set excessively.
4. Set the audio output level.
Enable : Sets whether to use audio output.
Gain : Specify the audio output amplification.
5. When done, click [Apply (
)].
Camera setup
You can change the camera settings according to the environment where the camera is located.
1. From the Setup menu, select the <Video & Audio (
)>
tab.
2. Click <Camera setup>.
3.
Configure the settings as necessary of :
Image preset,
Sensor,
SSDR, White balance, Back light, Exposure, Day/Night,
Special, OSD, IR
4. When done, click [Apply ( )].
`
If a certain time (timeout: 240s) is elapsed
with your not pressing the [Apply
(
)]
button after changing the settings, your changes will not be
applied.
If you want to set an image preset
Users can set presets easily.
The selected image preset mode will be in operation during the configured period, but at other times the
values configured in the user preset mode are reflected.
1. Select a desired mode from the image presets.
Definition focus : This is the factory setting for your camera.
Select it for video recording, focusing on reproducibility.
Motion focus : Record a moving object clearly. If there are
many moving objects, such as on a road or in a crowded
place like a museum, select this option.
J
`
Noise level can increase in a low illumination environment, and
sensitivity can go down.
Reduced noise : Select this when you need a video with low noise in the low illumination environment.
Bright video : This makes the dark area in a full video brighter.
J
`
Video contracts effects are reduced.
Motion focus&Reduced noise : Use this when there are many moving objects, such as on a road
or in a crowded place like a museum, or when you need a video with low noise in a low illumination
environment.
Motion focus&Bright video : Use it when there are many moving objects, such as on a road or in a
crowded place like a museum, or when you need to make a dark area in full video brighter.
User preset : Select it if you want to display video with settings chosen by you.
J
`
If the user selects something other than the preset mode, they cannot set the shutter speed, AGC, SSDR or SSNR3.
35

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Samsung SNV-6085R bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Samsung SNV-6085R in de taal/talen: Engels als bijlage per email.

De handleiding is 21,27 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info