E-MAIL
You can send an email notice to DVR registered users at a certain interval or when an event occurs.
Using the mouse may make setup easier.
Use the direction buttons to move to <E-MAIL> in the
left corner of the NETWORK setup menu and press the
[ENTER] button.
Use direction buttons (▲▼◄ ►) to move to a desired
item, and set the value.
SERVER: Set the mail server.
This is a mail server used when the DVR notifies with
email.
You must use the mail server that supports Microsoft
Outlook.
Enter the mail server using the virtual Keyboard. (Page 32)
PORT: Enter the mail server port.
SECURITY:
If set to <ON>, your email will be sent in secure mode.
However, the email will not be sent if the server you entered does not support SSL.
If set to <OFF>, this will send emails of the server that does not support SSL.
USER: Enter the mail account ID of the sender.
PASSWORD: Enter the mail account password of the sender.
FROM: Provide the sender email that will be displayed in the email notice.
TEST E-MAIL: Sends a test email to check if the current setting can send emails normally.
When your settings are completed, press the <APPLY> button on the bottom.
Your settings will be applied.
Press the <CLOSE> button to display the confirmation dialog and return to the previous menu.
Network Connection and Settings
According to the user network connection, configure a proper network settings so as to change the settings
of a remote DVR and to search and play the recording data via a local or external Internet connection.
For more information, refer to “Network Setup Guide” that comes with the DVR.
4.
5.
•
•
•
-
-
•
•
•
•
6.
7.
M
DVR
DVR
Local PC
IP Sharer
xDSL or
Cable Modem
xDSL or
Cable Modem
External
Remote PC
DDNS Server
(websamsung.net)
INTERNET
IP SETUP
DDNS
E-MAIL
CANCEL APPLY
CLOSE
NETWORK
TEST
25
OFF
SERVER
PORT
SECURITY
USER
PASSWORD
FROM
TEST E-MAIL
