The PROGRAM function can be used to assign a new station to an
existing program number.
You can store up to:
●
15 FM stations
●
8 MW stations(option)
●
7 LW stations(option)
15 AM stations(option)
1
Select the required frequency band by pressing
the TUNER
/BAND
button.
2
Press the TUNING/MODE button to select the “MANUAL” or “AUTO” tuning mode.
To search for a station... Press the TUNING/MODE button
Manually
One or more times until MANUAL is displayed.
Automatically
One or more times until AUTO is displayed.
PRESET function is explained in detail in the section “Selecting a Stored Station”.
Select the station to be stored by:
●
Pressing the , buttons on the remote control or turning the
TUNING /MODE on the main unit.
●
To scroll through the frequencies faster when searching manually, press
and hold the , buttons.
●
The automatic search procedure may stop on a frequency that does not
correspond to a radio station. If this happens, use the manual search mode.
If you do not want to store the radio station found, revert to Step 3 and
search for another station.
Otherwise:
1 Press the PROGRAM/SET button.
Result:
“MEMORY” is displayed for a few seconds.
2 Press the , buttons to assign a program number between 1 and 15.
3 Press the PROGRAM/SET to store the radio station.
Result:
“MEMORY” is no longer displayed and the station is stored.
NOTE
