60912
9
Verklein
Vergroot
Pagina terug
1/39
Pagina verder
Plasma TV
user manual
BN68-01448A-00
Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care centre.
Country
Customer Care Centre
Web Site
AUSTRALIA 1300 362 603 www.samsung.com
CHINA
800-810-5858
010-6475 1880
www.samsung.com
HONG KONG 3698-4698 www.samsung.com/hk
INDIA
3030 8282
1800 110011
www.samsung.com
INDONESIA 0800-112-8888 www.samsung.com
JAPAN 0120-327-527 www.samsung.com/jp
MALAYSIA 1800-88-9999 www.samsung.com/my
New zealand 0800SAMSUNG(726-7864) www.samsung.com/nz
PHILIPPINES 1800-10-SAMSUNG(726-7864) www.samsung.com/ph
SINGAPORE 1800-SAMSUNG(726-7864) www.samsung.com
SOUTH AFRICA 0860-SAMSUNG(726-7864 ) www.samsung.com
TAIWAN 0800-329-999 www.samsung.com/tw
THAILAND
1800-29-3232
02-689-3232
www.samsung.com
TURKEY 444 77 11 www.samsung.com
U.A.E
800-SAMSUNG (726-7864)
8000-4726
www.samsung.com
VIETNAM 1 800 588 889 www.samsung.com
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please
register your product at
www.samsung.com/global/register
Model Serial No.
BN68-01448A.indb 1 2008-03-31 오후 6:15:40
English - 2
© 2008 Samsung Electronics Co., Ltd. All rights reserved.
User Instructions
Screen Image retention
Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the
plasma monitor panel for more than 2 hours as it can cause screen image retention. This image
retention is also known as “screen burn”. To avoid such image retention, reduce the degree of
brightness and contrast of the screen when displaying a still image.
Height
The PDP can normally operate only under 2000m in height. It might abnormally function at a place
over 2000m in height so do not install and operate there.
Heat on the top of the PDP TV
The top side of the product may be hot after long period of use as heat dissipates from the panel
through the vent hole in the upper part of the product. This is normal and does not indicate any defect
or operation failure of the product. However, children should be prevented from touching the upper
part of the product.
The product is making a ‘cracking’ noise.
A ‘cracking’ noise may occur when the product contracts or expands due to a change of surrounding
environment such as temperature or humidity. This is normal and not a defect of the unit.
Cell Defects
The PDP uses a panel consisting of 1,230,000(SD-level) to 3,150,000(HD-level) pixels which require
sophisticated technology to produce. However, there may be few bright or dark pixels on the screen.
These pixels will have no impact on the performance of the product.
Avoid operating the TV at temperatures below 5°C(41°F)
A still image displayed too long may cause permanent damage to the PDP Panel.
Watching the PDP TV in 4:3 format for a long period of time may leave traces
of borders displayed on the left, right and centre of the screen caused by the
difference of light emission on the screen. Playing a DVD or a game console
may cause similar effect to the screen. Damages caused by the above effect are
not covered by the Warranty.
Afterimage on the Screen.
Displaying still images from Video games and PC for longer than a certain period of time may
produce partial afterimages. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when
displaying still images.
Warranty
- Warranty does not cover any damage caused by image retention.
- Burn-in is not covered by the warranty.
Installation
Be sure to contact an authorized service centre, when installing your set in a location with heavy
dust, high or low temperatures, high humidity, chemical substance and where it operates continually
such as the airport, the train station etc. Failure to do so may cause a serious damage to your set.
BN68-01448A.indb 2 2008-03-31 오후 6:15:41
English - 3
Symbols
Press
Important
Note
Contents
General Information
User Instructions ............................................. 2
Checking Parts ................................................ 4
Using the Stand-Base ..................................... 4
Control Panel ................................................. 5
Connection Panel ............................................ 6
Viewing the Remote Control ........................... 8
Operation
Switching Your Television On and Off ............. 9
Viewing the Menus .......................................... 9
Plug & Play Feature ...................................... 10
Using the TOOLS Button .............................. 11
Viewing External Signal Sources .................. 12
Editing Device Names ................................... 13
Channel Control
Storing Channels Automatically .................... 13
Storing Channels Manually ........................... 14
Adding / Locking Channels ........................... 15
Sorting the Stored Channels ......................... 16
Assigning Names to Channels ...................... 16
Fine Tuning Channel Reception .................... 17
Picture Control
Changing the Picture Standard ..................... 17
Customizing the Picture Settings .................. 18
Conguring Detailed Settings on the Picture 18
Picture Options ............................................. 20
Resetting the Picture Settings to the Factory
Defaults ......................................................... 23
Sound Control
Sound Features ............................................ 23
Selecting the Sound Mode
(depending on the model) ............................. 25
Connecting Headphones (Sold separately) .. 25
Function Description
Time Features ............................................... 26
Language / Light Effect / Melody /
Entertainment / Energy Saving ..................... 27
Viewing the Picture in Picture (PIP) .............. 28
PC Display
Setting up Your PC Software
(Based on Windows XP) ............................... 29
Input Mode (PC) ............................................ 30
Setting the PC ............................................... 31
Appendix
Teletext Feature (depending on the model) .. 32
Wall Mount Kit Specications (VESA) ........... 34
Wall- mount adjustment (Sold separately) .... 35
How to assemble the Stand-Base
(depending on the model) ............................. 36
Troubleshooting ............................................ 37
Specications ................................................ 38
English
BN68-01448A.indb 3 2008-03-31 오후 6:15:41
English - 4
Using the Stand-Base
➢
Two or more people should carry
the PDP. Never lay the PDP on the
floor because of possible damage
to the screen. Always keep the
PDP upright.
The PDP can rotate 20 degrees in
right and left directions.
Checking Parts
Owners Instructions Remote Control/
AAA Batteries
Power Cord Cloth-Clean
Warranty Card/
Registration Card/
Safety Guide Manual
(Not available in all locations)
Cover-Bottom /
Screws (2ea)
(Refer to page 36)
Ferrite Core for
Power Cord
(Not available in all
locations)
Ferrite Core for
Headphone
(Not available in all
locations)
Sold Separately
S-Video Cable Antenna Cable Component Cables Audio Cables Video Cable
PC Cable PC Audio Cable HDMI Cable HDMI/DVI Cable
Ferrite Core (Power Cord, Headphone)
The ferrite cores are used to shield the cables from interference.
When connecting a cable, open the ferrite core and clip it around the cable near
the plug.
-20° ~ 20°
BN68-01448A.indb 4 2008-03-31 오후 6:15:43
English - 5
Control Panel
1
SOURCE
Toggles between all the available
input sources (TV, AV1, AV2, S-Video,
Component1, Component2, PC, HDMI1,
HDMI2
).
2
MENU
Press to see an on-screen menu of your
TV’s features.
3
+ VOL –
Press to increase or decrease the volume.
In the on-screen menu, use the + VOL
buttons as you would use the and
buttons on the remote control.
4
CH
Press to change channels.
In the on-screen menu, use the CH
buttons as you would use the and
buttons on the remote control.
5
In the on-screen menu, use this button as
you would use the ENTER button on the
remote control.
6
POWER
Press to turn the TV on and off.
Power Indicator
Blinks and turns off when the power is on and
lights up in stand-by mode.
Remote Control Sensor
Aim the remote control towards this spot on
the TV.
7
Speakers
Front Panel
The product colour and shape may vary depending on the model.
7
BN68-01448A.indb 5 2008-03-31 오후 6:15:44
English - 6
Continued...
Side Panel
The product colour and shape may vary depending on the model.
Connection Panel
Whenever you connect an audio or video system to your set, ensure that all elements are
switched off.
When connecting an external device, match the colour of the connection terminal to the cable.
1
AV IN 2(S-VIDEO or VIDEO / AUDIO R/L)
Video (S-Video or Video) and Audio inputs for
external devices, such as a camcorder or VCR.
2
Headphones jack
You can connect a set of headphones if you
wish to watch a television programme without
disturbing the other people in the room.
➢
Prolonged use of headphones at a high
volume may damage your hearing.
2
or
1
BN68-01448A.indb 6 2008-03-31 오후 6:15:45
English - 7
1
ANT IN
75Ω Coaxial connector for Aerial/Cable Network.
2
SERVICE
Connector for service.
Connect the serial jack between the
electro-motion wall mount bracket and your
TV when you want to adjust the TV viewing
angle using your remote control.
3
Connecting external Audio Devices
Connect RCA audio signals from the TV to an
external source, such as Audio equipment.
4
COMPONENT IN 1, COMPONENT IN 2
Audio (AUDIO L/R) and video (Y/PB/PR) inputs
for Component.
5
PC IN(PC) / AUDIO
Connect to the video and audio output jack on
your PC.
6
AV IN 1(VIDEO / AUDIO R/L)
Connect RCA cable to an appropriate external
A/V device such as VCR, DVD or Camcorder.
7
HDMI IN 1, 2
No additional Audio connection is needed
for an HDMI to HDMI connection.
When using an HDMI/DVI cable
connection, you must use the HDMI IN 2
jack.
What is HDMI?
− “High Definition Multimedia interface”
allows the transmission of high
definition digital video data and
multiple channels of digital audio.
- The HDMI/DVI terminal supports DVI
connection to an extended device with
the appropriate cable (not supplied).
The difference between HDMI and DVI
is that the HDMI device is smaller in
size, has the HDCP (High Bandwidth
Digital Copy Protection) coding feature
installed, and supports multi - channel
digital audio.
DVI IN (HDMI2) AUDIO R/L
DVI audio outputs for external devices.
8
POWER IN
Connect the supplied power cord.
Supported modes for HDMI/DVI and Component
480i 480p 576i 576p 720p 1080i
HDMI/DVI 50Hz X X X O O O
HDMI/DVI 60Hz X O X X O O
Component O O O O O O
The product colour and shape may vary depending on the model.
Rear Panel
Whenever you connect an audio or video system to your set, ensure that all elements are switched off.
When connecting an external device, match the colour of the connection terminal to the cable.
4
1
5
37
or
Cable Television
Network
or
8
2
6
BN68-01448A.indb 7 2008-03-31 오후 6:15:47
English - 8
Viewing the Remote Control
1
POWER button
(turns the TV on and off)
2
Selects the TV mode directly
3
Number buttons for direct
channel access
4
One/Two-digit channel
selection
5
Temporary sound switch-off
6
Volume increase
Volume decrease
7
Use to quickly select
frequently used functions.
8
Control the cursor in the
menu
9
Use to see information on
the current broadcast
@
Channel control button
(Refer to page 15)
#
Available source selection
$
Previous channel
%
Next channel
Previous channel
^
Returns to the previous
menu
&
Exit the on-screen menu
*
Displays the main on-screen
menu
(
Picture size selection
)
Selects the HDMI mode
directly
a
Picture effect selection
(Refer to page 17)
Teletext Functions
(Refer to page 32)
2
Exit from the teletext display
(depending on the model)
7
Teletext size
9
Teletext reveal
0
Fastext topic selection
!
Teletext display/mix both
teletext information and the
normal broadcast
@
Teletext store
#
Teletext mode selection
(LIST/FLOF)
$
Teletext sub page
%
P :Teletext next page
P :Teletext previous page
^
Teletext hold
&
Teletext cancel
*
Teletext index
Continued...
BN68-01448A.indb 8 2008-03-31 오후 6:15:49
English - 9
Installing Batteries in the Remote Control
1 Lift the cover at the back of the remote control upward as
shown in the figure.
2 Install two AAA size batteries.
➢
Make sure to match the “+” and “” ends of the
batteries with the diagram inside the compartment.
Do not mix battery types, i.e. alkaline and manganese.
3 Close the cover as shown in the figure.
➢
Remove the batteries and store them in a cool and dry
place if you won’t be using the remote control for a long
time. The remote control can be used up to about 23 feet from the TV.
➢
If the remote control doesn’t work! Check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power cut, or is the power cord unplugged?
5. Is there a special fluorescent light or a neon sign nearby?
Switching Your Television On and Off
The mains lead is attached to the rear of the television.
1 Plug the mains lead into an appropriate socket.
➢
The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz.
2 Press the (Power) button (On/Off) on the front of the television or press the POWER button on
the remote control to switch the television on. The channel that you were watching last is re-selected
automatically. If you have not yet stored any channels, no clear picture appears. Refer to “Storing
Channels Automatically” on page 13 or “Storing Channels Manually” on page 14.
➢
If the television is initially powered on, several basic customer settings proceed automatically.
Refer to “Plug & Play Feature” on pages 10~11.
3 To switch the television off, press the (Power) button (On/Off) on the front of the television or press
the POWER button on the remote control.
4 To switch the TV on, press the (Power) button (On/Off) on the front of the TV or press the POWER
button or number buttons on the remote control.
Viewing the Menus
1 Press the MENU button.
The main menu is displayed on the screen.
Its left side has five icons: Picture, Sound, Channel, Setup,
and Input.
2 Press the ▲ or ▼ button to select one of the icons.
Press the ENTER button to access the icon’s sub-menu.
3 Press the ▲ or ▼ button to move to items in the menu.
Press the ENTER button to enter items in the menu.
4 Press the ▲/▼/◄/► button to change the selected items.
Press the RETURN button to return to the previous menu.
5 Press the EXIT button to exit from the menu.
Move
Enter
Exit
Mode :
Standard
Cell Light 7
Contrast 90
Brightness 45
Sharpness 50
Colour 50
Tint G 50 R 50
Detailed Settings
Picture Options
Reset : OK
Picture
T V
BN68-01448A.indb 9 2008-03-31 오후 6:15:50
English - 10
Plug & Play Feature
When the television is initially powered on, several basic
customer settings proceed automatically and subsequently.
The following settings are available.
1 If the television is in standby mode, press the POWER button
on the remote control. The message Start Plug & Play. is
displayed. Press the ENTER button. Language menu is
displayed.
2 Select the appropriate language by pressing the ▲ or ▼
button. Press the ENTER button. The message Select 'Home
Use' when installing this TV in your home. is displayed.
3 Press the or ► button to select Store Demo or Home Use,
then press the ENTER button. The message to check the
connected status of the antenna is displayed.
➢
The default selection is Home Use.
We recommend setting the TV to Home Use mode for
the best picture in your home environment.
Store Demo mode is only intended for use in retail
environments.
If the unit is accidentally set to Store Demo mode and
you want to return to Home Use (Standard): Press the
Volume button. When the volume OSD is displayed,
press and hold the MENU button for 5 seconds.
4 Make sure that the antenna is connected to the TV.
Press the ENTER button. Area menu is displayed.
5 Select your country or area by pressing the ▲ or ▼ button,
then press the ENTER button. Auto Store menu is displayed.
6 Press the ENTER button to start search the channels.
The channel search will start and end automatically. After
all the available channels are stored, Clock Set menu is
automatically displayed. Press the ENTER button.
➢
To stop the search before it has finished, press the
ENTER button with Stop selected.
7 Press the ◄ or ► button to select Month, Day, Year, Hour,
Minute or am/pm. Set these by pressing the ▲ or ▼ button.
➢
You can set the Month, Day, Year, Hour, and Minute
directly by pressing the numeric buttons on the remote
control.
8 Press the ENTER button to confirm your setting.
The message Enjoy your viewing is displayed.
When you have finished, press the ENTER button.
➢
Even if the ENTER button is not pressed, the message will
automatically disappear after several seconds.
Continued...
Plug & Play
Start Plug & Play.
OK
Enter
Plug & Play
P 1 C
--
40 MHz
0 %
Enter
Skip
Start
Plug & Play
Check antenna input.
Enter
Skip
OK
Plug & Play
Select ' Home Use'
when installing this TV in your home.
Move
Enter
Store Demo
Home Use
Plug & Play
Move
Adjust
Enter
Clock Set
Month Day Year Hour Minute
am/pm
--
--
----
--
--
am
Enjoy your viewing
OK
Plug & Play
Language
Move
Enter
English
Français
Plug & Play
Area
Move
Enter
Skip
Asia/W.Europe
CIS/E.Europe
China
Hong Kong/UK
BN68-01448A.indb 10 2008-03-31 오후 6:15:51
English - 11
If you want to reset this feature …
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Setup, then press the
ENTER button.
3 Press the ENTER button again to select Plug & Play.
The message Start Plug & Play. is displayed.
Using the TOOLS Button
You can use the TOOLS button to select your frequently used functions quickly and easily.
The “TOOLS” menu changes depending on which external input mode you are viewing.
1 Press the TOOLS button.
The TOOLS menu will appear.
2 Press the ▲ or ▼ button to select a menu, then press the
ENTER button.
3 Press the ▲/▼/◄/►/ENTER buttons to display, change, or
use the selected items.
For a more detailed description of each function, refer to the
corresponding page.
• Picture Mode, see page 17
• Sound Mode, see page 23
• Sleep Timer, see page 26
• SRS TS XT, see page 24
• Energy Saving, see page 27
• Dual I-II, see page 25
TOOLS
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
Dual I-II : Mono
ExitMove Adjust
Move
Enter
Return
Plug & Play
Language : English
Time
Light Effect :
In Watching TV
Wall-mount Adjustment
Melody : Off
Entertainment : Off
Energy Saving : Off
PIP
Setup
T V
BN68-01448A.indb 11 2008-03-31 오후 6:15:51
English - 12
Viewing External Signal Sources
You can switch between viewing signals from connected
equipment, such as a VCR, DVD, Set-Top Box, and the TV
source (broadcast or cable).
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Input, then press the
ENTER button.
3 Press the ENTER button again to select Source List.
4 Press the ▲ or ▼ button to select the signal source, then
press the ENTER button.
Available signal sources:
TV, AV1, AV2, S-Video,
Component1, Component2, PC, HDMI1, HDMI2
➢
You can choose only those external devices that are
connected to the TV.
You can select these options simply by pressing the SOURCE
button on the remote control.
To watch television programme again, press the TV button and
select the channel number required.
You can also watch HDMI mode simply by pressing the HDMI
button on the remote control.
Move
Enter
Return
Source List :
TV
Edit Name
Input
T V
Move
Enter
Return
TV
AV1 :−−−−
AV2 :−−−−
S-Video :−−−−
Component1 :−−−−
Component2 :−−−−
PC :−−−−
HDMI1 :−−−−
HDMI2 :−−−−
Source List
T V
BN68-01448A.indb 12 2008-03-31 오후 6:15:52
English - 13
Editing Device Names
You can give a name to the external source.
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Input, then press the
ENTER button.
3 Press the ▲ or ▼ button to select Edit Name, then press the
ENTER button.
4 Press the ▲ or ▼ button to select the external source to be
edited, then press the ENTER button.
5 Select the required device by pressing ▲ or ▼, then press the
ENTER button.
Available device names:
VCR, DVD, Cable STB, Satellite
STB, PVR STB, AV Receiver, Game, Camcorder, PC, TV,
IPTV, Blu-Ray, HD DVD, DMA
6 Press the EXIT button to exit.
Storing Channels Automatically
You can scan for the frequency ranges available to you
(availability depends on your country).
Automatically allocated programme numbers may not
correspond to actual or desired programme numbers.
However you can sort numbers manually and clear any
channels you do not wish to watch.
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Channel, then press the
ENTER button.
3 Press the ENTER button to select Area.
4 Select your area by pressing the ▲ or ▼ button, then press the
ENTER button.
5 Press the ▲ or ▼ button to select Auto Store, then press the
ENTER button.
6 Press the ENTER button again to start the search.
The search will end automatically.
➢
To stop the search before it has finished, press the
RETURN or the ENTER button.
Move
Enter
Return
Source List :
TV
Edit Name
Input
T V
Auto Store
P 1 C
--
40 MHz
0 %
Enter
Return
Start
Move
Enter
Return
Area : Asia/W.Europe
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
Channel
T V
Move
Enter
Return
AV1 :
−−−−
AV2 : −−−−
S-Video : −−−−
Component1 : −−−−
Component2 : −−−−
PC : −−−−
HDMI1 : −−−−
HDMI2 : −−−−
Edit Name
T V
−−−−
VCR
DVD
Cable STB
Satellite STB
PVR STB
AV Receiver
Game
Move
Enter
Return
Area : Asia/W.Europe
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
Channel
T V
Asia/W.Europe
CIS/E.Europe
China
Hong Kong/UK
Australia
NZL/Indonesia
South Africa
America
BN68-01448A.indb 13 2008-03-31 오후 6:15:53
English - 14
Storing Channels Manually
You can store television channels, including those received via
cable networks.
When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you wish
to identify.
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Channel, then press the
ENTER button.
3 Press the ▲ or ▼ button to select Manual Store, then press
the ENTER button.
4 Select the required option by pressing the ▲ or ▼ button, then
press the ENTER button.
5 When you are satisfied with your setting, press the ENTER
button.
6 Press the EXIT button to exit.
Programme (Programme number to be assigned to a channel)
Press the ▲ or ▼ button until you find the correct number.
You can also select the channel number directly by pressing the numeric buttons (0~9) on the
remote control.
Colour System: Auto/PAL/SECAM/NTSC 4.43/NTSC 3.58
Press the ▲ or ▼ button to select the required colour standard.
Sound System: BG/DK/I/M
Press the ▲ or ▼ button to select the required sound standard.
Channel (When you know the number of the channel to be stored)
Press the ▲ or ▼ button to select
C (Air channel) or S (Cable channel).
Press the ► button, then press the ▲ or ▼ button to select the required number.
You can also select the channel number directly by pressing the numeric buttons (0~9) on the
remote control.
If there is abnormal sound or no sound, re-select the sound standard required.
Search (When you do not know the channel numbers)
Press the ▲ or ▼ button to start the search.
The tuner scans the frequency range until the first channel or the channel that you selected is
received on the screen.
Store (When you store the channel and associated programme number)
Set to
OK by pressing the ENTER button.
Channel mode
P (Programme mode): When completing tuning, the broadcasting stations in your area have
been assigned to position numbers from P00 to P99. You can select a channel by entering the
position number in this mode.
C (Air channel mode): You can select a channel by entering the assigned number to each air
broadcasting station in this mode.
S (Cable channel mode): You can select a channel by entering the assigned number for each
cable channel in this mode.
Move
Enter
Return
Programme :
P 1
Colour System : Auto
Sound System : BG
Channel : C 5
Search : 175 MHz
Store : ?
Manual Store
T V
Move
Enter
Return
Area :
Asia/W.Europe
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
Channel
T V
BN68-01448A.indb 14 2008-03-31 오후 6:15:54
English - 15
Adding / Locking Channels
Using the Channel Manager, you can conveniently add or lock
channels.
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Channel, then press the
ENTER button.
3 Press the ▲ or ▼ button to select Channel Manager, then
press the ENTER button.
Adding channels
Using the Channel List, you can add channels.
4 Press the ENTER button again to select Channel List.
5 Move to the ( ) field by pressing the ▲/▼/◄/► buttons,
select a channel to be added, and press the ENTER button to
add the channel.
➢
If you press the ENTER button again, the ( ) symbol next
to the channel disappears and the channel is not added.
Locking channels
This feature allows you to prevent unauthorized users, such as
children, from watching unsuitable programmes by muting out
video and audio.
6 Press the ▲ or ▼ button to select Child Lock, then press the
ENTER button.
7 Select On by pressing the ▲ or ▼ buttons, then press the
ENTER button.
8 Press the ▲ or ▼ button to select Channel List, then press
the ENTER button.
9 Move to the ( ) field by pressing the ▲/▼/◄/► buttons,
select a channel to be locked, and press the ENTER button.
➢
If you press the ENTER button again, the ( ) symbol
next to the channel disappears and the channel lock is
canceled.
➢
A blue screen is displayed when Child Lock is activated.
10 Press the EXIT button to exit.
➢
You can select these options simply by pressing the CH LIST
button on the remote control.
Move
Enter
Return
Channel List
Child Lock : Off
Channel Manager
T V
Move
Enter
Return
Area :
Asia/W.Europe
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
Channel
T V
Channel List
P 1 C 4
1/10
Prog.
0
C
-
-
1 C 2
2 C 83
3 C 80
4 C 7
5 C 89
6 C 90
7 C 11
8 C 12
9 C 13
Add Lock
Move Enter
Page
Return
Move
Enter
Return
Channel List
Child Lock : Off
Channel Manager
T V
Off
On
BN68-01448A.indb 15 2008-03-31 오후 6:15:55
English - 16
Assigning Names to Channels
Channel names will be assigned automatically when channel
information is broadcast. These names can be changed,
allowing you to assign new names.
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Channel, then press the
ENTER button.
3 Press the ▲ or ▼ button to select Name, then press the
ENTER button.
4 Press the ▲ or ▼ button to select the channel to be assigned
to a new name, then press the ENTER button.
5 Press the ▲ or ▼ button to select a letter, a number, or a
symbol (Results in this sequence: A~Z, 0~9, +, -,
*
, /, blank).
Move on to the previous or next letter by pressing the ◄ or ►
button, then press the ENTER button.
6 Repeat steps 4 to 5 for each channel to be assigned to a new
name.
7 Press the EXIT button to exit.
Sorting the Stored Channels
This operation allows you to change the programme numbers
of the stored channels.
This operation may be necessary after using the auto store.
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Channel, then press the
ENTER button.
3 Press the ▲ or ▼ button to select Sort, then press the
ENTER button.
4 Select the channel that you wish to move by pressing the
▲ or ▼ button, then press the ENTER button.
5 Select the number of the programme to which the channel is to
be moved by pressing the ▲ or ▼ button.
Press the ENTER button. The channel is moved to its new
position and all other channels are shifted accordingly.
6 Repeat steps 4 to 5 until you have moved all the channels to
the required programme numbers.
7 Press the EXIT button to exit.
Move
Enter
Return
Area :
Asia/W.Europe
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
Channel
T V
Move
Enter
Return
Area :
Asia/W.Europe
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
Channel
T V
Move
Enter
Return
Prog. Ch. Name
0 C−− -----
1 C2 -----
2 C83 -----
3 C80 -----
4 C7 -----
5 C8 -----
6 C9 -----
7 C10 -----
8 C11 -----
9 C15 -----
Sort
T V
Move
Adjust
Return
Prog. Ch. Name
0 C−− -----
1 C2 -----
2 C83 -----
3 C80 -----
4 C7 -----
5 C8 -----
6 C9 -----
7 C10 -----
8 C11 -----
9 C15 -----
Name
T V
A
BN68-01448A.indb 16 2008-03-31 오후 6:15:56
English - 17
Fine Tuning Channel Reception
If the reception is clear, you do not have to fine tune the
channel, as this is done automatically during the search and
store operation.
If the signal is weak or distorted, you may have to fine tune the
channel manually.
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Channel, then press the
ENTER button.
3 Press the ▲ or ▼ button to select Fine Tune, then press the
ENTER button.
4 To obtain a sharp, and clear picture and good sound quality,
press the ◄ or ► button until you reach the optimal setting.
Press the ENTER button.
➢
Press the INFO button. Fine Tune Store will change the
colour of the Channel OSD (On Screen Display) from white
to red and add the “ * ” mark.
➢
To reset the fine tuning to 0, select Reset by pressing the
▲ or ▼ button. Press the ENTER button.
5 Press the EXIT button to exit.
Changing the Picture Standard
You can select the type of picture which best corresponds to
your viewing requirements.
1 Press the MENU button to display the menu.
2 Press the ENTER button to select Picture.
3 Press the ENTER button again to select Mode.
4 Select the required mode by pressing the ▲ or ▼ button,
then press the ENTER button.
Available modes:
Dynamic, Standard, Movie
➢
The settings values may vary depending on the input
source.
5 Press the EXIT button to exit.
➢
Choose Dynamic for viewing the TV during the day or
when there is bright light in the room.
Choose Standard for general TV watching mode.
Choose Movie when viewing the movie.
➢
You can select these options simply by pressing the P.MODE
button on the remote control.
Easy Setting
1 Press the TOOLS button on the remote control.
2 Press the ▲ or ▼ button to select Picture Mode.
3 Press the ◄ or ► button to select the required option.
4 Press the EXIT or TOOLS button to exit.
Fine Tune
P 1 *
+2
Adjust
Save
Return
Reset
P 1 *
Mono
Picture : Standard
Sound : Custom
SRS TS XT : Off
−−
:
−− am
Move
Enter
Return
Area :
Asia/W.Europe
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
Channel
T V
TOOLS
PictureMode ◄ Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
Dual I-II : Mono
Adjust
ExitMove
Move
Enter
Return
Mode :
Standard
Cell Light 7
Contrast 90
Brightness 45
Sharpness 50
Colour 50
Tint G 50 R 50
Detailed Settings
Picture Options
Reset : OK
Picture
T V
Move
Enter
Return
Mode : Standard
Cell Light
7
Contrast 90
Brightness 45
Sharpness 50
Colour 50
Tint G 50 R 50
Detailed Settings
Picture Options
Reset : OK
Picture
T V
Dynamic
Standard
Movie
BN68-01448A.indb 17 2008-03-31 오후 6:15:57
English - 18
Customizing the Picture Settings
Your television has several setting options that allow you to
control the picture quality.
1 Press the MENU button to display the menu.
2 Press the ENTER button to select Picture.
3 Press the ENTER button again to select Mode.
4 Select the required mode by pressing the ▲ or ▼ button,
then press the ENTER button.
Available modes:
Dynamic, Standard, Movie
5 Select the required option by pressing the ▲ or ▼ button,
then press the ENTER button.
6 When you are satisfied with your setting, press the ENTER
button.
7 Press the EXIT button to exit.
Cell Light - ContrastBrightnessSharpnessColourTint
➢
In TV, AV, S-Video modes of the PAL system, you cannot use the Tint Function.
➢
In PC mode, you can only make changes to Cell Light, Contrast, and Brightness.
Press the ◄ or ► button until you reach the optimal setting.
Configuring Detailed Settings on the Picture
You can set detail picture settings.
1 Press the MENU button to display the menu.
2 Press the ENTER button to select Picture.
3 Press the ▲ or ▼ button to select Detailed Settings, then
press the ENTER button.
4 Select the required option by pressing the ▲ or ▼ button, then
press the ENTER button.
Available options:
Black Adjust, Dynamic Contrast,
Gamma, Colour Space, White Balance, Flesh Tone, Edge
Enhancement.
5 When you are satisfied with your setting, press the ENTER
button.
6 Press the EXIT button to exit.
➢
When the picture mode is set to Movie or Standard, Detailed
Settings can be selected.
➢
In PC mode, you can only make changes to Dynamic
Contrast, Gamma and White Balance from among the
Detailed Settings items.
Continued...
Move
Enter
Return
Black Adjust :
Off
Dynamic Contrast : Medium
Gamma : 0
Colour Space : Native
White Balance
Flesh Tone : 0
Edge Enhancement
: Off
Detailed Settings
T V
Move
Enter
Return
Mode :
Standard
Cell Light 7
Contrast 90
Brightness 45
Sharpness 50
Colour 50
Tint G 50 R 50
Detailed Settings
Picture Options
Reset : OK
Picture
T V
Move
Enter
Return
Mode :
Standard
Cell Light 7
Contrast 90
Brightness 45
Sharpness 50
Colour 50
Tint G 50 R 50
Detailed Settings
Picture Options
Reset : OK
Picture
T V
Cell Light 7
Move Adjust
Return
BN68-01448A.indb 18 2008-03-31 오후 6:15:58
English - 19
Black Adjust: Off/Low/Medium/High
You can directly select the black level on the screen to adjust the screen depth.
Dynamic Contrast: Off/Low/Medium/High
You can adjust the screen contrast so that the optimal contrast is provided.
Gamma: -3 ~ +3
You can adjust the middle brightness of pictures.
Press the ◄ or ► button until you reach the optimal setting.
Colour Space: Auto/Native/Custom
Colour space is a colour matrix composed of red, green and blue colours.
Select your favorite colour space to experience the most natural colour.
Auto: Auto Colour Space automatically adjusts to the most natural colour tone based on program
sources.
Native: Native Colour Space offers deep and rich colour tone.
Custom: Adjusts the colour range to suit your preference. (see “Customizing the Colour Space”)
Customizing the Colour Space
Colour: Red/Green/Blue/Yellow/Cyan/Magenta
Adjusts the Colour range to suit your preference.
Colour is available when Colour Space is set to Custom.
Press the ▲ or ▼ button to select Red, Green, Blue, Yellow, Cyan or Magenta.
Press the ENTER button.
Red/Green/Blue: In Colour, you can adjust the RGB values for the selected colour.
Press the ▲ or ▼ button to select Red, Green or Blue to change it. Press the ENTER button.
Press the ◄ or ► button to decrease or increase the value of a particular item.
Press the ENTER button.
Reset: Resets the colour space to the default values.
White Balance: R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain/Reset
You can adjust the colour temperature for more natural picture colours.
R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain: Changing the adjustment value will refresh the
adjusted screen.
Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.
Press the ◄ or ► button until you reach the optimal setting.
Reset: The previously adjusted white balance will be reset to the factory defaults.
Flesh Tone:-15~+15
You can emphasize the pink tone in the picture.
Press the ◄ or ► button until you reach the optimal setting.
➢
Changing the adjustment value will refresh the adjusted screen.
Edge Enhancement: Off/On
You can emphasize object boundaries.
BN68-01448A.indb 19 2008-03-31 오후 6:15:58
English - 20
Picture Options
You can set detailed picture settings.
1 Press the MENU button to display the menu.
2 Press the ENTER button to select Picture.
3 Press the ▲ or ▼ button to select Picture Options, then press
the ENTER button.
4 Select the required option by pressing the ▲ or ▼ button, then
press the ENTER button.
5 When you are satisfied with your setting, press the ENTER
button.
6 Press the EXIT button to exit.
➢
In PC mode, you can only make changes to the Colour Tone,
Size and Screen Burn Protection from among the items in
Picture Options.
Colour Tone: Cool2/Cool1/Normal/Warm1/Warm2
➢
When the picture mode is set to Dynamic or Standard,
Warm1 and Warm2 cannot be selected.
Size: 16 : 9/Wide Zoom/Zoom/4 : 3/Just Scan
You can select the picture size which best corresponds to
your viewing requirements.
16 : 9
: Sets the picture to 16:9 wide mode.
Wide Zoom: Magnify the size of the picture more than 4:3.
Move the screen up/down using the ▲ or ▼ button after
selecting the by pressing the ► or ENTER button.
Zoom: Magnify the size of the picture vertically on screen.
4 : 3
: Sets the picture to 4:3 normal mode.
Just Scan: Use the function to see the full image without
any cutoff when HDMI (720p/1080i), Component (1080i)
signals are input.
After selecting Just Scan in HDMI (1080i) or
Component (1080i) mode
:
Press the ◄ or ► button to select
, then press the
ENTER button.
Press the ▲, ▼, ◄ or ► button to move the picture up,
down, left and right.
Reset: Press the ◄ or ► button to select “Reset”, then
press the ENTER button. You can initialize the setting.
➢
With the HDMI Just Scan picture size, depending on
the AV devices, the screen may be cut off or a specific
appears on the screen.
➢
For an HDMI (1080p) connection of 24, 25, 30, 50, and
60 Hz, and for a Component (1080p) connection of 50
and 60Hz, only the input source is supported.
➢
You can change the picture size simply by pressing the P.SIZE button on the remote control.
➢
Depending on the input source, the picture size options may vary.
➢
The items available may differ depending on the selected mode.
➢
Settings can be adjusted and stored for each external device you have connected to an input of
the TV.
➢
In PC Mode, only “16:9” and “4:3” mode can be adjusted.
Positioning and Sizing the screen using Zoom
Resizing the screen using the
Zoom enables the positioning and sizing of the screen to up/down
direction using the ▲ or ▼ button as well as the screen size.
Move the screen up/down using the ▲ or ▼ button after selecting the
by pressing the ◄ or ►
button.
Resize the screen vertically using the ▲ or ▼ button after selecting the
by pressing the ◄ or ►
button.
Continued...
Move
Enter
Return
Colour Tone :
Normal
Size : 16:9
Digital NR : Auto
DNle : On
HDMI Black Level : Normal
Blue Only Mode : Off
Screen Burn Protection
Picture Options
T V
Move
Enter
Return
16 : 9
Wide Zoom
Zoom
4 : 3
Just Scan
Size
T V
Move
Enter
Return
Colour Tone :
Normal
Size : 16:9
Digital NR : Auto
DNle : Off
HDMI Black Level : Normal
Blue Only Mode : Off
Screen Burn Protection
Picture Options
T V
Move
Enter
Return
Mode :
Standard
Cell Light 7
Contrast 90
Brightness 45
Sharpness 50
Colour 50
Tint G 50 R 50
Detailed Settings
Picture Options
Reset : OK
Picture
T V
BN68-01448A.indb 20 2008-03-31 오후 6:15:59
English - 21
Digital NR: Off/Low/Medium/High/Auto
If the signal received by the television is weak, you can activate this feature to reduce any static and
ghosting that may appear on the screen.
➢
This function is not available in PC mode.
DNIe: Off/Demo/On
This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you
can view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the
applied DNIe and normal pictures on the screen, for demonstration purposes. Using this function, you
can view the difference in the visual quality.
➢
DNIe
TM
(Digital Natural Image engine)
This feature brings you more detailed image with 3D noise reduction, detail enhancement,
contrast enhancement and white enhancement. New image compensation Algorithm gives
brighter, clearer, more detailed image to you. DNIe
TM
technology will fit every signal into your
eyes.
➢
This function is not available in PC mode.
➢
DNIe is only available in Dynamic mode.
HDMI Black Level: Normal/Low
Using this function, you can adjust the image quality when the screen burn (appearance of black
level, low contrast, low colour, etc.) is encountered by the HDMI input for RGB limited range (16 to
235).
➢
This function is active only when the external input connects to HDMI(RGB signals).
Blue Only Mode: Off/On
This function is for AV device measurement experts. This function displays the blue signal only by
removing the red and green signals from the video signal so as to provide a Blue Filter effect that
is used to adjust the Color and Tint of video equipment such as DVD players, Home Theaters, etc.
Using this function, you can adjust the Color and Tint to preferred values appropriate to the signal
level of each video device using the Red/Green/Blue/Cyan/Magenta/Yellow Color Bar Patterns,
without using an additional Blue Filter.
➢
Blue Only Mode is available when the picture mode is set to Movie or Standard.
Screen Burn Protection: Pixel Shift/White/Scrolling/Side Gray
To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology.
This technology enables you to set picture movement up/down (Vertical Line) and side to side
(Horizontal Dot). The Time setting allows you to program the time between movement of the picture
in minutes.
Pixel Shift: Using this function, you can minutely move pixels on the PDP in horizontal or vertical
direction to minimize after image on the screen.
Set
Pixel Shift to On by pressing the ▲ or ▼ button, then press the ENTER button.
Select the required option by pressing the ▲ or ▼ button, then press the
ENTER button.
Available options:
Horizontal Dot, Vertical Line, Time
➢
Optimum condition for pixel shift;
PC
TV/AV/S-Video/
Component/HDMI
Horizontal Dot 1 2
Vertical Line 1 2
Time (minute) 2 2 min
➢
The Pixel Shift value may differ depending on the
monitor size (inches) and mode.
➢
This function is not available in the Just Scan mode.
Continued...
Move
Enter
Return
Pixel Shift
White
Scrolling
Side Gray : Dark
Screen Burn Protection
T V
Move
Enter
Return
Pixel Shift :
On
Horizontal Dot : 2
Vertical Line : 2
Time : 2 min
Pixel Shift
T V
BN68-01448A.indb 21 2008-03-31 오후 6:16:00
English - 22
White: This function helps remove after images on the screen by changing the colour of pixels
to white. Use this function when there are remaining after images or symbols on the screen
especially when you displayed a still image on the screen for a long time.
Scrolling: This function helps remove after images on the screen by moving all the pixels on the
PDP according to a pattern. Use this function when there are remaining after images or symbols
on the screen especially when you displayed a still image on the screen for a long time.
Side Gray: When you watch TV with the screen ratio of 4:3, the screen is prevented from any
damage by adjusting the white balance on both extreme left and right sides.
Dark: When you set the screen ratio to 4:3, it darkens the left and right sides.
Light: When you set the screen ratio to 4:3, it brightens the left and right sides.
➢
To remove after images on the screen, use either White or Scrolling function.
Although both of the two functions remove after images on the screen, Scrolling is more
effective.
➢
The after image removal function has to be executed for a long time (approximately 1 hour) to
effectively remove after images on the screen. If after image is not improved after the execution
of the function, repeat the function again.
➢
Press any button on the remote control to cancel this feature.
BN68-01448A.indb 22 2008-03-31 오후 6:16:00
English - 23
Resetting the Picture Settings to the Factory Defaults
You can set detailed picture settings.
1 Press the MENU button to display the menu.
2 Press the ENTER button to select Picture.
3 Press the ▲ or ▼ button to select Reset, then press the
ENTER button.
4 Press the ▲ or ▼ button to select OK or Cancel then press
the ENTER button.
➢
Each mode can be reset.
Sound Features
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Sound, then press the
ENTER button.
3 Select the required option by pressing the ▲ or ▼ button, then
press the ENTER button.
Available options:
Mode, Equalizer, SRS TS XT, Auto Volume,
TV Speaker, Sound Select
4 When you are satisfied with your setting, press the ENTER
button.
5 Press the EXIT button to exit.
Mode: Standard/Music/Movie/Speech/Custom
You can select the type of special sound effect to be used
when watching a given broadcast.
➢
Choose Standard for the TV standard factory
settings.
Choose Music when watching the music videos or
concerts.
Choose Movie when watching movies.
Choose Speech when watching a show that is
mostly dialog(i.e., news).

Choose Custom to recall your personalized settings.
Easy Setting
1 Press the TOOLS button on the remote control.
2 Press the ▲ or ▼ button to select Sound Mode.
3 Press the ◄ or ► button to select the required option.
4 Press the EXIT or TOOLS button to exit.
Equalizer: Balance/100Hz/300Hz/1kHz/3kHz/10kHz
The television has several settings which allow you to control
the sound quality.
➢
R/L Sound Balance Adjustment:
To adjust the sound balance of the R/L speakers.
Bandwidth Adjustment(100Hz, 300Hz, 1kHz, 3kHz, 10kHz) : To adjust the level of different
bandwidth frequencies.
➢
If you make any changes to these settings, the sound standard is automatically switched to
Custom.
Continued...
Move
Enter
Return
Mode :
Custom
Equalizer
SRS TS XT : Off
Auto Volume : Off
TV Speaker : On
Sound Select : Main
Sound
T V
Move
Adjust
Return
Equalizer
T V
R
L
+
0
-
Balance 100Hz 300Hz 1kHz 3kHz 10kHz
+
0
-
TOOLS
Picture Mode : Standard
SoundMode ◄ Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
Dual I-II : Mono
Adjust
ExitMove
Move
Enter
Return
Mode :
Standard
Cell Light 7
Contrast 90
Brightness 45
Sharpness 50
Colour 50
Tint G 50 R 50
Detailed Settings
Picture Options
Reset : OK
Picture
T V
OK
Cancel
BN68-01448A.indb 23 2008-03-31 오후 6:16:01
English - 24
SRS TS XT: Off/On
TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel
content over two speakers. TruSurround delivers a compelling, virtual surround sound experience
through any two-speaker playback system, including internal television speakers. It is fully compatible
with all multichannel formats.
Easy Setting
1 Press the TOOLS button on the remote control.
2 Press the ▲ or ▼ button to select SRS TS XT.
3 Press the ◄ or ► button to select Off or On.
4 Press the EXIT or TOOLS button to exit.
Auto Volume: Off/On
Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume
every time the channel is changed. This feature lets you automatically adjust the volume of the
desired channel by lowering the sound output when the modulation signal is high or by raising the
sound output when the modulation signal is low.
TV Speaker: Off/On
If you want to hear the sound through separate speakers, cancel the internal amplifier.
➢
The , and MUTE buttons do not operate when the TV Speaker is set to Off.
➢
When TV Speaker is set to Off, you can operate only Sound Select (in PIP mode) in Sound
menu.
Sound Select: Main/Sub
When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture.
Main: Used to listen to the sound of the main picture.
Sub: Used to listen to the sound of the sub picture.
TruSurround XT, SRS and Symbol are trademarks of SRS Labs, Inc.
TruSurround XT technology is incorporated under license from SRS Labs, Inc.
TOOLS
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRSTSXT ◄ Off
Energy Saving : Off
Dual I-II : Mono
Adjust
ExitMove
BN68-01448A.indb 24 2008-03-31 오후 6:16:01
English - 25
Selecting the Sound Mode (depending on the model)
The DUAL I-II button displays/controls the processing and output of the audio signal. When power
is switched on, the mode is automatically preset to either “DUAL-I” or “Stereo”, depending on the
current transmission.
Easy Setting
1 Press the TOOLS button on the remote control.
2 Press the ▲ or ▼ button to select Dual I-II.
3 Press the ◄ or ► button to select the required option.
4 Press the EXIT or TOOLS button to exit.
Type of broadcast On-screen indication
NICAM
Stereo
Regular broadcast
(Standard audio)
Mono (Normal use)
Regular + NICAM Mono NICAM
Mono
(Normal)
NICAM Stereo
NICAM
Stereo
Mono
(Normal)
NICAM DUAL-I/II
NICAM
DUAL-1
NICAM
DUAL-2
Mono
(Normal)
A2
Stereo
Regular broadcast
(Standard audio)
Mono (Normal use)
Bilingual or DUAL-I/II DUAL I DUAL II
Stereo Stereo
Mono
(Forced mono)
➢
If the receiving conditions deteriorate, listening will be easier if the mode is set to Mono.
If the stereo signal is weak and automatic switching occurs, switch to Mono.
Connecting Headphones (Sold separately)
You can connect a set of headphones to your set if you wish to watch a TV program without
disturbing other people in the room.
When you insert the head set jack into the corresponding
port, you can operate only Auto Volume and Sound Select(in
PIP mode) in Sound menu.
Prolonged use of headphones at a high volume may
damage your hearing.
You will not hear sound from the speakers when you
connect headphones to the TV.
The headphone volume and TV volume are adjusted
separately.
TV Side Panel
TOOLS
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
DualI-II ◄ Mono
Adjust
ExitMove
BN68-01448A.indb 25 2008-03-31 오후 6:16:02
English - 26
Time Features
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Setup, then press the
ENTER button.
3 Press the ▲ or ▼ button to select Time, then press the
ENTER button.
4 Select the required option by pressing the ▲ or ▼ button,
then press the ENTER button.
Available options:
Clock Set, Sleep Timer, Timer1, Timer2,
Timer3
5 When you are satisfied with your setting, press the
ENTER button.
6 Press the EXIT button to exit.
Clock Set
You can set the television clock so that the current time is
displayed when pressing the INFO button on the remote
control. You must also set the time if you wish to use the
automatic on or off timers.
Press the ◄ or ► button to select
Month, Day, Year, Hour,
Minute, or am/pm.
Set these by pressing the ▲ or ▼ button.
➢
You can set the Month, Day, Year, Hour, and Minute
directly by pressing the numeric buttons on the remote
control.
➢
In the event of a power interruption or the set being turned off at the supply, the settings for the
Clock will be lost.
Sleep Timer
You can select a time period of between 30 and 180 minutes after which the television automatically
switches to standby mode.
Select the preset time interval (Off, 30, 60, 90, 120, 150, 180) for staying on by pressing the ▲ or
▼ button.
Easy Setting
1 Press the TOOLS button on the remote control.
2 Press the ▲ or ▼ button to select Sleep Timer.
3 Press the ◄ or ► button to select the minute.
4 Press the EXIT or TOOLS button to exit.
Timer1 / Timer2 / Timer3
You can set the On/Off timers so that the television will switch
on or off automatically at the time you select.
You must set the clock first.
Press the ◄ or ► button to select the required item below.
Press the ▲ or ▼ button to adjust to the setting satisfied.
On Timer : Select hour, minute, am/pm, and Off/On.
(To activate timer with the setting satisfied, set to On.)
Off Timer : Select hour, minute, am/pm, and Off/On.
(To activate timer with the setting satisfied, set to On.)
Repeat : Select Once, Everyday, Mon ~ Fri, Mon ~ Sat, or
Sat ~ Sun.
Volume : Select the required volume level.
Programme : Select the required channel.
➢
You can set the hour, and minute directly by pressing the number buttons on the remote control.
Auto Power Off
When you set the timer “On”, the TV will eventually turn off, if no controls are operated for 3 hours
after the TV was turned on by timer. This function is only available in timer “On” mode and prevents
overheating, which may occur if a TV is on for too long time.
Move
Enter
Return
Clock Set :
−−:−− am
Sleep Timer : Off
Timer1 : Off
Timer2 : Off
Timer3 : Off
Time
T V
Move
Enter
Return
Plug & Play
Language : English
Time
Light Effect :
In Watching TV
Wall-mount Adjustment
Melody : Off
Entertainment : Off
Energy Saving : Off
PIP
Setup
T V
Move
Adjust
Return
Timer 1
T V
12 00 Off
On Time
:
Off Time
Repeat
Once
10
Volume
12 00 Off
01
Programme
am
am
:
TOOLS
Picture Mode : Standard
Sound Mode : Custom
SleepTimer ◄ Off
SRS TS XT : Off
Energy Saving : Off
Dual I-II : Mono
Adjust
ExitMove
BN68-01448A.indb 26 2008-03-31 오후 6:16:02
English - 27
Language / Light Effect / Melody / Entertainment /
Energy Saving
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Setup, then press the
ENTER button.
3 Select the required option by pressing the ▲ or ▼ button, then
press the ENTER button.
4 When you are satisfied with your setting, press the ENTER
button.
5 Press the EXIT button to exit.
Language
It is variable depending on the model. When you start using
the television for the first time, you must select the language which will be used for displaying menus
and indications.
Light Effect: Off/ In Standby/In Watching TV/Always
You can turn on/off the blue LED on the front of TV according to the situation. Use it for saving power
or when the LED dazzles your eyes.
- Off: The blue LED is always off.
- In Standby: The blue LED lights while in Standby mode and it turns off when your TV is turned on.
- In Watching TV: The blue LED lights when watching TV and it turns off when your TV is turned off.
- Always: The blue LED always lights.
➢
Set the Light Effect to Off to reduce the power consumption.
Melody: Off/Low/Medium/High
The TV power on/off melody sound can be adjusted.
➢
When the Melody does not play
➢
When no sound is output from the TV because the MUTE button has been pressed.
➢
When no sound is output from the TV because the (Volume) button has been pressed.
➢
When the TV is turned off by Sleep Timer function.
Entertainment: Off/Sports/Cinema/Game
Entertainment mode enables you to select the optimal display and sound for sports, cinema and
games.
Off: Switches the Entertainment function off.
Sports: Provides the optimal picture and sound quality for sports.
Cinema: Provides the optimal picture and sound quality for movie watching.
You can experience a richer picture and enhanced sound.
Game: Provides the optimal picture and sound quality for games. This mode accelerates the
playing speed when using an external game console connected to the TV.
➢
If you set any of the three Entertainment modes to On, the settings will be locked and can not
be adjusted. If you want to make Picture and Sound mode adjustments, the Entertainment mode
must be turned off.
➢
The Entertainment settings are saved for each input source.
Energy Saving: Off/Low/Medium/High
This feature adjusts the screen brightness depending on the surrounding lighting conditions.
- Off: Switches off the Energy Saving mode.
- Low: Operates in standard mode regardless of the surrounding illumination.
- Medium: Enters medium power saving mode regardless of the surrounding illumination.
- High: Enters maximum power saving mode regardless of the surrounding illumination.
Easy Setting
1 Press the TOOLS button on the remote control.
2 Press the ▲ or ▼ button to select Energy Saving.
3 Press the ◄ or ► button to select the required option.
4 Press the EXIT or TOOLS button to exit.
Move
Enter
Return
Plug & Play
Language : English
Time
Light Effect :
In Watching TV
Wall-mount Adjustment
Melody : Off
Entertainment : Off
Energy Saving : Off
PIP
Setup
T V
TOOLS
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
EnergySaving ◄ Off
Dual I-II : Mono
Adjust
ExitMove
BN68-01448A.indb 27 2008-03-31 오후 6:16:03
English - 28
Viewing the Picture in Picture (PIP)
You can display a sub picture within the main picture. In this
way you can watch TV program or monitor the video input
from any connected devices.
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Setup, then press the
ENTER button.
3 Press the ▲ or ▼ button to select PIP, then press the
ENTER button.
4 Select the required option by pressing the ▲ or ▼ button, then
press the ENTER button.
Available options:
PIP(Off/On), Source, Size, Position,
Programme
5 When you are satisfied with your setting, press the ENTER
button.
6 Press the EXIT button to exit.
PIP: Off/On
You can activate or deactivate the PIP function.
Main picture Sub picture
Component1, 2
TV, AV1, AV2HDMI1, 2
PC
Source: TV/AV1/AV2
You can select a source of the sub-picture.
➢
You can select these options simply by pressing the SOURCE button on the remote control.
Size: / /
You can select a size of the sub-picture.
➢
If main picture is in PC and Component mode, Size is not available.
Position: / / /
You can select a position of the sub-picture.
➢
In Double( , ) mode, Position cannot be selected.
Programme
You can select a channel of the sub-picture only when the Source is set to TV.
Move
Enter
Return
Plug & Play
Language : English
Time
Light Effect :
In Watching TV
Wall-mount Adjustment
Melody : Off
Entertainment : Off
Energy Saving : Off
PIP
Setup
T V
Move
Enter
Return
PIP : On
Source : TV
Size :
Position :
Programme : P 1
PIP
T V
BN68-01448A.indb 28 2008-03-31 오후 6:16:04
English - 29
Setting up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. But the actual screens
on your PC will probably be different, depending upon your particular version of Windows and
your particular video card. But even if your actual screens look different, the same, basic set-up
information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung
Dealer.)
1 Right click the mouse on the Windows Desktop, then click on
Properties.
The Display Properties will be displayed.
2 Click on Settings tab, then set the Display Mode with
reference to the Display Modes Table. You do not need to
change the Colours settings.
3 Click on Advanced. A new settings dialog box will be
displayed.
4 Click on the Monitor tab, then set the Screen refresh rate
with reference to the Display Modes Table. Set the Vertical
Frequency and Horizontal Frequency individually if you can do
so instead of setting the Screen refresh rate.
5 Click on OK to close the window, then Click on OK button to
the Display Properties window. Automatic re-booting may commence at this moment.
BN68-01448A.indb 29 2008-03-31 오후 6:16:04
English - 30
Input Mode (PC)
Both screen position and size will vary depending on the type of PC monitor and its resolution.
The table below shows all of the display modes that are supported:
D-Sub Input
Mode
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel Clock
Frequency
(MHz)
Sync
Polarity
(H/V)
PS42A410
PS50A410
IBM
640 x 350
720 x 400
31.469
31.469
70.086
70.087
25.175
28.322
+ / -
- / +
VESA
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1360 x 768
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
47.712
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
60.015
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
85.500
- / -
- / -
- / -
+ / +
+ / +
+ / +
- / -
- / -
+ / +
+ / +
HDMI/DVI Input
Mode
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel Clock
Frequency
(MHz)
Sync
Polarity
(H/V)
PS42A410
PS50A410
VESA
640 x 480
800 x 600
1024 x 768
1360 x 768
31.469
37.879
48.363
47.712
59.940
60.317
60.004
60.015
25.175
40.000
65.000
85.500
- / -
+ / +
- / -
+ / +
When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.
The interlace mode is not supported.
The set might operate abnormally if a non-standard video format is selected.
Separate and Composite modes are supported. SOG is not supported.
For the PS42A410, PC text quality is optimum in VESA mode(1024 x 768@60Hz).
For the PS50A410, PC text quality is optimum in VESA mode (1360 x 768@60Hz).
BN68-01448A.indb 30 2008-03-31 오후 6:16:04
English - 31
Setting the PC
Preset to the PC mode by pressing the SOURCE button.
1 Press the MENU button to display the menu.
2 Press the ENTER button to select Picture.
3 Select the required option by pressing the ▲ or ▼ button, then
press the ENTER button.
Available options:
Auto Adjustment, Screen Adjustment,
Reset
4 When you are satisfied with your setting, press the ENTER
button.
5 Press the EXIT button to exit.
Auto Adjustment
Auto adjustment allows the PC screen to self-adjust to the
incoming PC video signal.
The values of fine, coarse and position are adjusted automatically.
Easy Setting
1 Press the TOOLS button on the remote control.
2 Press the ▲ or ▼ button to select Auto Adjustment, then
press the ENTER button.
Screen Adjustment: Coarse/Fine/Position/Image Reset
Coarse/Fine
The purpose of picture quality adjustment is to remove or
reduce picture noise.
If the noise is not removed by Fine-tuning alone, then adjust
the frequency as best as possible (coarse) and Fine-tune
again.
After the noise has been reduced, re-adjust the picture so
that it is aligned on the center of screen.
1 Press the ▲ or ▼ button to select Coarse or Fine, then
press the ENTER button.
2 Press the ◄ or ► button to adjust the screen quality,
vertical stripes may appear or the picture may be blurry.
Press the ENTER button.
Position
Adjust the PC’s screen positioning if it does not fit the TV
screen.
1 Adjust the position by pressing the ▲/▼/◄/► button.
2 Press the ENTER button.
Image Reset
You can replace all image settings with the factory default
values.
Image Reset is completed.
Move
Enter
Return
Position
T V
Auto Adjustment in Progress
Please wait.
Move
Enter
Return
Mode :
Standard
Cell Light 7
Contrast 90
Brightness 45
Sharpness 50
Auto Adjustment
Screen Adjustment
Detailed Settings
Picture Options
Reset : OK
Picture
T V
TOOLS
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
PIP
Auto Adjustment
ExitMove
Enter
Move
Enter
Return
Coarse 50
Fine 63
Position
Image Reset
Screen Adjustment
T V
BN68-01448A.indb 31 2008-03-31 오후 6:16:05
English - 32
Teletext Feature (depending on the model)
Most television stations provide written information services via teletext. The index page of the
teletext service gives you information on how to use the service. In addition, you can select
various options to suit your requirements by using the remote control buttons.
For teletext information to be displayed correctly, channel reception must be stable. Otherwise,
information may be missing or some pages may not be displayed.
1
TV
Exit from the teletext display (depending on the model)
2
(size)
Press to display the double-size letters in the upper half of the
screen. For lower half of the screen, press it again.
To display normal screen, press it once again.
3
(reveal)
Used to display the hidden text (answers to quiz games, for
example). To display normal screen, press it again.
4
Coloured buttons (red/green/yellow/blue)
If the FASTEXT system is used by a broadcasting company, the
different topics covered on a teletext page are colour-coded and
can be selected by pressing the coloured buttons. Press one
of them corresponding to the required. The page is displayed
with other coloured information that can be selected in the same
way.
To display the previous or next page, press the corresponding
coloured button.
5
(teletext on/mix)
Press to activate teletext mode after selecting the channel
providing the teletext service. Press it twice to overlap the
teletext with the current broadcasting screen.
6
(store)
Used to store the teletext pages.
7
(mode)
Press to select the teletext mode (LIST/FLOF).
If you press it in the LIST mode, it switches into the List save
mode.
In the List save mode, you can save teletext page into list using
the (store) button.
8
(sub-page)
Used to display the available sub-page.
9
(page up)
Used to display the next teletext page.
0
(page down)
Used to display the previous teletext page.
!
(hold)
Used to hold the display on a given page if the selected page is
linked with several secondary pages
which follow on automatically. To resume, press it again.
@
(cancel)
Used to display the broadcast when searching for a page.
#
(index)
Used to display the index (contents) page at any time while you
are viewing teletext.
You can change teletext pages by pressing the numeric buttons
on the remote control.
Continued...
BN68-01448A.indb 32 2008-03-31 오후 6:16:07
English - 33
The teletext pages are organized according to six categories:
Part Contents
A
B
C
D
E
F
Selected page number.
Broadcasting channel identity.
Current page number or search indications.
Date and time.
Text.
Status information.
FASTEXT information.
Teletext information is often divided between several pages
displayed in sequence, which can be accessed by:
Entering the page number
Selecting a title in a list
Selecting a coloured heading (FASTEXT system)
Press the TV button to exit from the teletext display.
BN68-01448A.indb 33 2008-03-31 오후 6:16:07
English - 34
Wall Mount Kit Specifications (VESA)
Install your wall mount on a solid wall perpendicular to the floor.
When attaching to other building materials, please contact your nearest dealer.
If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
Product Family inch VESA Spec. (A * B) Standard Screw Quantity
LCD-TV
23 ~ 26 200
*
100 M4
4
32 ~ 40 200
*
200 M6
46 ~ 52
400 * 400
600 * 400
M8
57
700 * 400
(No VESA)
57 ~ 70 800 * 400
80 ~ 1400 * 800
PDP-TV
42 ~ 58
400 * 400
600 * 400
M8
4
63
676 * 407
(No VESA)
6
63 ~ 70 800 * 400 4
80 ~ 1400 * 800 4
➢
We provided the standard dimensions for wall mount kits as shown in the table above.
➢
When purchasing our wall mount kit, a detailed installation manual and all parts necessary for
assembly are provided.
➢
Do not use screws longer than the standard dimension, as they may cause damage to the inside of
the TV set.
➢
For wall mounts that do not comply with the VESA standard screw specifications, the length of the
screws may differ depending on their specifications.
➢
Do not use screws that do not comply with the VESA standard screw specifications.
Do not use fasten the screws too strongly, this may damage the product or cause the product to fall,
leading to personal injury. Samsung is not liable for these kinds of accidents.
➢
Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall
mount is used or the consumer fails to follow the product installation instructions.
➢
Our 57” and 63” models do not comply with VESA Specifications. Therefore, you should use our
dedicated wall mount kit for this model.
➢
Do not exceed 15 degrees tilt when mounting this TV.

Do not install your Wall Mount Kit while your TV is turned on.
It may result in personal injury due to electric shock.
BN68-01448A.indb 34 2008-03-31 오후 6:16:08
English - 35
Wall- mount adjustment (Sold separately)
Once the auto wall mount is installed, the position of your TV can be easily adjusted.
Serial Cable(1P to 1P)(Not supplied)
Rear Panel Auto Wall-Mount
Entering the menu
1 Press the ▲, ▼, ◄ or ► button on your remote control.
The W
all Mount Adjustment screen is displayed.
If the W
all Mount Adjustment screen is not displayed when clicking
on a direction button while watching your TV, use the menu to display
that screen.
Press the MENU button to display the menu. Press the ▲ or ▼
button to select Setup, then press the ENTER button.
Press the ▲ or ▼ button to select Wall-Mount Adjustment, then
press the ENTER button.
Remembering the Position
2
Adjust to the desired position using the ▲, ▼, ◄, ► buttons.
If you press an arrow button when no OSD is displayed on the
TV screen, the Adjustment screen appears.
Press the INFO button to reset. Press the ◄ or ► button to
select Yes, then press the ENTER button. The position is
initialized to the default setting.
3 Press the blue button.
Press the ▲ and ▼ buttons to select a save mode from either
Position1, Position2 or Position3 in order to save the
current position.
T
o not save the current position, press the RETURN button.
When selecting a save mode, you cannot use the Colour buttons.
4
Press the ENTER button to save.
When Position1 is selected, the message Current position saved
as Position1 is displayed.
5
Press the ENTER button.
The saved Position appears on the left side of the OSD.
Continued...
Move
Enter
Return
Plug & Play
Language
: English
Time
Light Effect :
In Watching TV
Wall-mount Adjustment
Melody : Off
Entertainment : Off
Energy Saving : Off
PIP
Setup
T V
Save
Return
Move
Enter
Select a mode to Save.
Position 1
Position 2
Position 3
Wall-Mount Adjustment
Adjust
Save Center
321Position
BN68-01448A-00Eng.indd 35 2008-04-08 오후 4:14:22
English - 36
How to assemble the Stand-Base (depending on the model)
Using the screws for securing the stand base and the monitor, firmly
attach the monitor to the stand base.
(The exterior of the set may be different from the picture.)
In case of installing your
TV on the wall, close the
cover (1) on the stand-base
connection part using two
screws for hiding.
Warning
Firmly secure the stand to the TV before
moving it, as the stand may fall and could
cause serious injury.
➢
Two or more people should carry
the TV. Never lay the TV on the floor
because of possible damage to the
screen.
Always store the TV upright.
Moving to the remembered position
1
Complete Step 1 of Entering the menu.
2 Pressing a Colour (Red, Green, Yellow) button moves the auto wall
mount to the saved position.
You can move the wall mount to one of the 3 pre-set positions
by pressing the Red (Position 1), Green (Position 2) or Yellow
(Position 3) buttons.
If you adjust the positon after moving to a pre-set position, the
position display will disappear.
For installation, refer to the Installation Manual provided with the wall
mount.
For product installation and the installation and moving of the wall mount, make sure to consult a specialized
installation company.
This installation manual is to be used when attaching the wall mount to a wall. When attaching to other building
materials, please contact your nearest dealer.
The auto wall mount will not work when Anynet+ is operating.
42 inches model is not compatible with the older wall mount model (WMN5090A).
Wall-Mount Adjustment
Adjust
Save Center
321Position
Position 1
BN68-01448A.indb 36 2008-03-31 오후 6:16:11
English - 37
Troubleshooting
Before contacting the Samsung after-sales service, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of
the television and contact your local dealer.
No sound or picture
Check that the mains lead has been connected to a wall socket.
Check that you have pressed the (Power) button (On/Off) on the front panel or press the POWER
button on the remote control.
Check the picture contrast and brightness settings.
Check the volume.
Check if TV Speaker is set to Off.
Normal picture but no sound
Check the volume.
Check whether the volume MUTE button on the remote control has been pressed.
No picture or black and white picture
Adjust the colour settings.
Check that the broadcast system selected is correct.
Sound and picture interference
Try to identify the electrical appliance that is affecting the television, then move it further away.
Plug the television into a different main socket.
Blurred or snowy picture, distorted sound
Check the direction, location and connections of your aerial.
This interference often occurs due to the use of an indoor aerial.
Remote control malfunctions
Replace the remote control batteries.
Clean the upper edge of the remote control (transmission window).
Check that the “+” and “–” ends of the batteries are inserted correctly.
Check that the batteries are drained.
Screen is black and power indicator light blinks steadily
On your computer check; Power, Signal Cable.
The TV is using its power management system.
Move the computers mouse or press any key on the keyboard.
On your equipment check (STB, DVD, etc) ; Power, Signal Cable.
The TV is using its power management system.
Press the Source button on the panel or remote control.
Turn the TV off and on.
The damaged picture appears in the corner of the screen.
If Just Scan is selected in some external devices, the damaged picture may appear in the corner of
the screen. This symptom is caused by external devices, not TV.
The “Resets all settings to the default values” message appears.
This appears when you press and hold the EXIT button for a while. The product settings are reset to
the factory defaults.
BN68-01448A.indb 37 2008-03-31 오후 6:16:12
English - 38
Specifications
The descriptions and characteristics in this booklet are given for information purposes only and
are subject to modification without notice.
Model Name PS42A410 PS50A410
Screen Size (Diagonal) 42 inch 50 inch
PC Resolution 1024 x 768 @ 60 Hz 1360 x 768 @ 60 Hz
Sound (Output) 10W + 10W
10W + 10W
Dimension (WxHxD)
Body
With stand
1054.9 X 699.4 X 95.0 mm
1054.9 X 759.4 X 315.9 mm
1230.9 X 769.7 X 95.0 mm
1230.9 X 821.8 X 315.9 mm
Weight
Body
With stand
27.8 Kg
31.5 Kg
34 Kg
37.6 Kg
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
50 °F to 104 °F (10 °C to 40 °C)
10% to 80%, non-condensing
-4 °F to 113 °F (-20 °C to 45 °C)
5% to 95%, non-condensing
➢
This device is a Class B digital apparatus.
Design and specifications are subject to change without prior notice.
For the power supply and Power Consumption, refer to the label attached to the product.
BN68-01448A.indb 38 2008-03-31 오후 6:16:12
This page is intentionally
left blank.
BN68-01448A.indb 39 2008-03-31 오후 6:16:12
9

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Samsung-PS42A410
  • als we tv willen opzetten met de automatische bediening reageert hij niet en hoort men hem niet aanslaan met de startschakelllr op de tv reageert hij ook niet Gesteld op 29-11-2020 om 14:03

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Samsung PS42A410 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Samsung PS42A410 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,24 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info