586982
48
Verklein
Vergroot
Pagina terug
1/130
Pagina verder
Media and tray_ 48
fusing temperature about 170°C (338 °F) for 0.1 second. The extra flaps
and strips might cause wrinkling, creasing, or jams and may even dam-
age the fuser.
For the best print quality, posi
tion margins no closer than 15 mm from
the edges of the envelope.
Avo
id printing over the area where the envelope’s seams meet.
Transparency
To avoid damaging the machine, use only transparencies designed for use
in laser printers.
Transparencies used in the machine must be able to withstand
machine’s fusing temperature.
Place them on a flat surface after removing them from the machine.
Do not leave unused transparencies in the paper tray for long periods of
ti
me. Dust and dirt may accumulate on them, resulting in spotty printing.
To avo
id smudging caused by fingerprints, handle them carefully.
To avoid fading, do not expose printed transparencies to prolonged sun-
light.
Ensure
that transp
arencies are not wrinkled, curled, or have any torn
edges.
Do not use transparencies that separates from the backing sheet.
To prevent transparencies from sticking to each other, do not let the
p
rinted sheets stack up as they are begin printed out.
Base
type transparency (ex. Xerox 3R3117) results in better image and
pap
er handling quality than paper backed (ex. Xerox 3R3028) or remov-
able stripe (3R3108) ones.
Depending on the selection or storage conditions of the transpar-
ency, jam or image scratch might occur.
Labels
To avoid damaging the machine, use only labels designed for use in laser
machines.
When selecting labels, consider the following factors:
- Adhesives: Th
e adhesive material should be stable at your
machine’s fusing temperature about 170°C (338 °F).
- Arra
ngement: Onl
y use labels with no exposed backing between
them. Labels can peel off sheets that have spaces between the
labels, causing serious jams.
- Curl: Prior to
printing, labels must lie flat with no more than 13 mm
of curl in any direction.
- Co
ndition: D
o not use labels with wrinkles, bubbles, or other indica-
tions of separation.
Do not use labels with slick back.
Do not use partially used labels.
Do not use the labels with separated edges.
Make sure that there is no exposed adhesive material between labels.
Exp
osed areas can cause labels to peel off during printing, which can
cause paper jams. Exposed adhesive can also cause damage to
machine components.
D
o not run a sheet of labels through the machine more than once. The
a
dhesive backing is designed for only a single pass through the
machine.
D
o not use labels that are separating from the backing sheet or are wrin-
kled, bubbled, or otherwise damaged.
Card stock/Custom-sized paper
Do not print on media smaller than 76.2 mm (3 inches) wide or 127 mm
(5 inches) long.
In the software application, set margins at least 6.4 mm (0.25 inches)
away from the edges of the material.
U
sable minimum weight of 3*5 inches paper is 105g/m². (28 lbs bond)
Ensure that 76.2 mm (3 inches) X 127 mm (5 inches) is not curled or has
no torn edges. Depending on the curl of 76.2 mm (3 inches) X 127 mm
(5
inches) paper, jam might occur.
48

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Samsung ML-551x Series bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Samsung ML-551x Series in de taal/talen: Engels als bijlage per email.

De handleiding is 34,59 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Samsung ML-551x Series

Samsung ML-551x Series Gebruiksaanwijzing - Nederlands - 132 pagina's

Samsung ML-551x Series Gebruiksaanwijzing - Deutsch - 137 pagina's

Samsung ML-551x Series Gebruiksaanwijzing - Français - 132 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info