Anynet+ is a function that enables you to control other Samsung Devices with
your Samsung TV's remote control.
Anynet+ function turns on and off each time you press.
.
Connect the product to a Samsung TV with the HDMI cable.
(See page 16)
.
Set the Anynet+ function on your TV. (See the TV instruction manual
for more information.)
The Anynet+ function supports some buttons of the remote control.
(TV POWER, TV INFO, TV CH)
Depending on your TV, certain HDMI output resolutions may not
work.
Please refer to the user’s manual of your TV. Please check the
logo (If your TV has an
logo, then it supports
Anynet+ function.)
This button enables you to select between listening to audio from your TV
or audio from the Air Track when connected via HDMI.
Press on the remote control of this unit.
HDMI AUDIO TV SND TV
HDMI AUDIO AVR HDMI
SOUND TV S MUTE
SOUND AVR TV ARC
▪
▪
▪
Insert a USB drive containing the rmware upgrade into the USB port on the back of the main unit.
Please be careful to not disconnect the power or remove the USB drive while upgrades are being applied. The
main unit will turn off automatically after completing the rmware upgrade.
When software is upgraded, settings you have made will return to their default (factory) settings. We recommend
you write down your settings so that you can easily reset them after the upgrade.
If the rnware fails to upgrade, we recommend formatting the USB data in FAT16 and trying again.
For upgrading purposes, do not format USB data in NTFS because it is not a supported le system.
Depending on the manufacturer, the USB may not be supported.
▪
▪
▪
▪
▪
Samsung may offer upgrades for the Crystal Surround
Air Track's system's rmware in the future.
Please visit Samsung.com or contact the Samsung call center
to receive information about downloading upgrades and
using a USB drive.
Upgrades will be possible by connecting a USB drive to the
USB port located on your Air Track.