ENG
CONNECTIONS
1312
Speaker Packages
Please confirm that all the following contents are included in the package.
Center Speaker
Subwoofer Speaker
Speaker Cable (5EA)Front/Rear Speaker (4EA)
Speaker Accessories
Speaker Installation
1 Turn the stand upside down and mount it on the stand
base.
2 Tighten 4 screws on the bottom side of the stand base.
3 Place the stand on the floor and tighten 2 screws on the
back of the stand.
4 Mount the speaker on the stand.
5 Tighten 2 screws on the back of the speaker.
6 This is the successfully assembled speaker.
How to Install the Speaker and the Stand
•
Make sure that the speaker is installed on a flat and
stable area. Otherwise it may be easily knocked over.
SPEAKER STAND Screw Screw
STAND BASE
1
6
3 4
2
5
*
Front speakers and rear speakers are
packaged separately as shown in the
diagram.
STAND
STAND
BASE
SPEAKER
STAND
Installing the DVD player
1 Mount the stand on the stand base and tighten 4
screws on the bottom side of the stand base.
2 Loosen 2 screws at the bottom of the back cover.
3 Detach the back cover by lifting it up.
4 Secure the main unit by aligning 4 protruding points
on the back of the main unit with the fixing holes
on the stand.
5 Tighten 2 screws in the middle of the stand.
6 Open a Toroidal Ferrite Core by pulling it upward.
Wrap it around of the system connection cable so it
will be next to the DVD Player. Close it back by
pressing it all the way down until you hear a clicking
sound.
7 Push the cable into the cable fixing hole in the stand.
8 To fix the cable, insert the cable holder into the hole
on the stand.
9 Let the cable run through the hole at the bottom
of the back cover and close the back cover.
10 Tighten 2 screws at the bottom of the back cover.
11
Open a Toroidal Ferrite Core by pulling it upward. Wrap
it around of the system connection cable so it will be
next to the DVD Player. Close it back by pressing it all
the way down until you hear a clicking sound.
2
1
3
6 7
9
11
10
4 5
BACK COVER
Toroidal
Ferrite Core
System connection
cable - main unit
System connection cable -
Main Unit to Subwoofer
STAND
STAND
STAND BASE
STAND
BACK COVER
BACK COVER
8
Please confirm that all the following contents are included in
the package.
Stand Packages
• The Toroidal Ferrite Core is designed to reduce
electromagnetic waves that may cause interference.
STAND BASE
Screw (6EA)
Cable Holder (3EA)
