104326
47
Verklein
Vergroot
Pagina terug
1/128
Pagina verder
ENGLISH
Users Manual
Thank you for buying a Samsung Camera.
This manual will guide you through using the camera, including capturing images,
downloading images and using the application software.
Please read this manual carefully before using your new camera.
ŝ2Ş
Instructions
ƈ Use this camera in the following order
Insert the
USB cable
Set up the
camera driver
Before connecting the camera to a PC, via the
USB cable, you will need to set up the camera
driver. Install the camera driver that is contained in
the Application S/W CD-ROM.(p.104)
Take a picture (p.19)
Insert the supplied USB cable into the PC’s USB
port and the camera’s USB connection
terminal.(p.112)
Check the camera’s power. If the power is turned
off, press the camera button to turn on.
Take a picture
Check the
camera’s power
Check
[Removable Disk]
Open WindowŖs EXPLORER and search for
[Removable Disk].(p.113)
ƃ If you use a card reader to copy the images on the memory card to your PC, the images
could be damaged. When transferring the images taken with the camera to your PC, be sure
to use the supplied USB cable to connect the camera to your PC. Please note that the
manufacturer holds no responsibility for loss or damage of images on the memory card due
to the use of a card reader.
ƃGetting to know your camera 5
ƃDanger 6
ƃWarning 6
ƃCaution 7
ƃAn FCC warning 7
ƃSystem chart 8
ƃIdentification of features 10
ƈFront & Top 10
ƈBack & Side 10
ƈBottom/ 5-function button 11
ƈSelf-timer lamp 12
ƈCamera Status Lamp 12
ƈMode icon 12
ƃConnecting to a Power Source 13
ƈUsing the batteries 14
ƃ
Instructions on how to use the memory card
15
ƃInserting the memory card 17
ƃRemoving the memory card 17
ƃLCD monitor indicator 18
ƃChanging the recording mode 19
ƈSelecting the [MODE] menu 19
ƃStarting the recording mode 22
ƈHow to use the Auto mode 22
ƈHow to use the Movie clip mode 22
ƈRecording the movie clip without voice 23
ƈUsing Successive Recording 23
ƈHow to use the Program mode 23
ƈHow to use the Scene modes 24
ƈ
How to use the VOICE RECORDING mode
25
ƃThings to Watch Out for When Taking
Pictures 26
ƃUsing the camera buttons to adjust the
camera 27
ƈPOWER button 27
ƈSHUTTER button 27
ƃZOOM W/ T button 27
ƃVoice recording/ Voice memo/ UP button 30
ƃMacro/ Down button 31
ƃFocus lock 32
ƃFlash/ Left button 33
ƃSelf-timer/ Right button 35
ƃMENU/ OK button 36
ƃM (Mode) button 36
ƃE (Effect) button 39
ƃSpecial Effect : Colour 39
ƃSpecial Effect : Preset focus frames 40
ƃSpecial Effect : Composite shooting 41
ƃSpecial Effect : Photo Frame 43
ƃMovie Clip frame stabilizer 44
ƃ+/- button 45
ƃUsing the LCD monitor to adjust the
camera settings 48
ƃHow to use the menu 50
ƃMode 50
ƃMODE SET 51
ƃSize 52
ƃQuality/ Frame rate 53
ƃMetering 54
ƃContinuous Shooting 54
ƃSharpness 55
ƃOSD(On Screen Display) information 55
ƃStarting play mode 56
ƈPlaying back a still image 56
ƈPlaying back a movie clip 57
ƈHow to capture the movie clip 57
ƈOn camera movie trimming 58
ŝ3Ş
Contents
READY
RECORDING
PLAY
ƈPlaying back a recorded voice 59
ƃLCD monitor indicator 60
ƃUsing the camera buttons to adjust the
camera 61
ƃThumbnail/ Enlargement button 61
ƃVoice memo/ Up button 62
ƃPlay & Pause/ Down button 63
ƃDelete button 64
ƃLeft/ Right/ Menu/ OK button 65
ƃAlbum button 66
ƃSetting up the play back function using the
LCD monitor 69
ƃRotating an image 72
ƃResize 73
ƃProtecting images 74
ƃDeleting all images 75
ƃDPOF 75
ƃDPOF : STANDARD 76
ƃDPOF : INDEX 76
ƃDPOF : PRINT SIZE 77
ƃDPOF : CANCEL 77
ƃCOPY TO CARD 78
ƃPictBridge 79
ƃPictBridge : Picture Selection 80
ƃPictBridge : Print Setting 81
ƃPictBridge : Printing 82
ƃPictBridge : RESET 83
ƃSetup menu 84
ƃFile name 85
ƃAuto power off 86
ƃLanguage 87
ƃFormatting a memory card 87
ƃSetting up the Date/ Time/ Date type 88
ƃImprinting the recording date 88
ƃAuto Focus lamp 89
ƃSound 89
ƃLCD brightness 90
ƃQuick view 90
ƃInitialisation 91
ƃSetting up the MYCAM menu 92
ƃStart up image 92
ƃShutter sound 93
ƃStart up sound 93
ƃImportant notes 94
ƃWarning indicator 96
ƃBefore contacting a service centre 97
ƃSpecifications 100
ƃSoftware Notes 102
ƃSystem Requirements 102
ƃAbout the software 103
ƃSetting up the application software 104
ƃStarting PC mode 112
ƃRemoving the USB Driver for
Windows 98SE 115
ƃRemovable Disk 116
ƃRemoving the removable disk 117
ƃSetting up the USB Driver for MAC 118
ƃUsing the USB Driver for MAC 118
ƃDigimax Master 119
ƃFAQ 124
ŝ4Ş
Contents
SOFTWARE
SETUP
ŝ5Ş
Getting to know your camera
Thank you for buying a Samsung Digital Camera.
ƃ Prior to using this camera, please read the user manual thoroughly.
ƃ When you require After Sales service, please bring the camera and the cause of the camera
malfunction (such as Battery, Memory card etc.) to the A/S centre.
ƃ Please check that the camera is operating properly prior to when you intend to use it
(e.g. for a trip or an important event) to avoid disappointment. Samsung camera takes no
responsibility for any loss or damages that may result from camera malfunction.
ƃ Keep the manual in a safe place.
Ҭ Microsoft, Windows and Windows logo are registered trademarks of Microsoft Corporation
incorporated in the United States and/or other countries.
Ҭ All brand and product names appearing in this manual are registered trademarks of their
respective companies.
DANGER
DANGER indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING
WARNING indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury.
CAUTION
CAUTION indicates a potentially hazardous situation, which, if not avoided, may
result in a minor or moderate injury.
This manual contains instructions on using this camera that will help you to use this
camera safely and correctly. This will help prevent danger and injury to others.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate
collection systems) This marking shown on the product or its literature, indicates that
it should not be disposed with other household wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it responsibly to
promote the sustainable reuse of material resources. Household users should contact either the
retailer where they purchased this product, or their local government office, for details of where
and how they can take this item for environmentally safe recycling. Business users should
contact their supplier and check the terms and conditions of the purchase contract.
This product should not be mixed with other commercial wastes for disposal.
ŝ6Ş
Danger
ƈ Do not attempt to modify this camera in any way. This may result in fire, injury, electric shock
or severe damage to you or your camera. Internal inspection, maintenance and repairs
should be carried out by your dealer or Samsung Camera Service centre.
ƈ Please do not use this product in close proximity to flammable or explosive gases, as this
could increase the risk of explosion.
ƈ Should any form of liquid or a foreign object enter the camera, do not use it. Switch off the
camera, and then disconnect the power source.
You must contact your dealer or Samsung Camera Service centre.
Do not continue to use the camera as this may cause a fire or electric shock.
ƈ Do not insert or drop metallic or inflammable foreign objects into the camera through access
points e.g. the memory card slot and battery chamber.
This may cause a fire or electric shock.
ƈ Do not operate this camera with wet hands. This could pose a risk of electric shock.
ƈ Do not use the flash in close proximity to people or animals.
Positioning the flash too close to your subject’s eyes, may cause eyesight damage.
ƈ For safety reasons keep this product and accessories out of reach of children or animals to
prevent accidents e.g.:
ҮSwallowing battery, or small camera accessories. If an accident should occur, please
consult a doctor immediately.
ҮThere is the possibility of injury from the camera’s moving parts.
ƈ Battery and camera may become hot during prolonged use and it may result in camera
malfunction. Should this be the case, allow the camera to sit idle for a few minutes to allow it
time to cool.
ƈ Do not leave this camera in places subject to extremely high temperatures, such as a sealed
vehicle, direct sunlight or other places of extreme variances in temperature.
Exposure to extreme temperatures may adversely affect the cameraŖs internal components
and could cause a fire.
ƈ When in use, do not cover the camera.
This may cause heat to build up and distort the camera body or cause a fire.
Always use the camera and its accessories in a well-ventilated area.
Warning
ŝ7Ş
Caution
ƈ Leaking, overheating, or burst battery could result in fire or injury.
ҮUse battery with the correct specification for the camera.
ҮDo not short circuit, heat or dispose of battery in fire.
ҮDo not insert the battery with the reverse polarities.
ƈ Remove the battery when not planning to use the camera for a long period of time.
Battery may leak corrosive electrolyte and permanently damage the camera’s components.
ƈ Do not fire the flash while it is in contact with hands or objects. Do not touch the flash after
using it continuously. It may cause burns.
ƈ Take care not to touch the lens and where the lens cover is to avoid taking an unclear image
and possibly causing camera malfunction.
ƈ Avoid obstructing the lens or the flash when you capture an image.
An FCC warning
ҮThis device has been tested in accordance with the limits of a class B digital device
under item 15 of the FCC rules. These limits are designed to provide protection
against harmful interference in commercial installation. This equipment generates,
absorbs and can emit radio frequency energy. If it is not installed and used in
accordance with the instructions, it may cause harmful interference to radio
communication.
There is however, no guarantee that interference will not occur in some situations.
Should any interference occur when this device is in operation, please try one or
more of the following measures.
ƈ Change the location and direction of any aerial.
ƈ Increase distance between the camera and the affected device.
ƈ Use a different socket away from the affected device.
ƈ Please contact a Samsung agent or a radio/TV engineer.
ҮThis device complies with part 15 of the FCC Rules.
ҮChanges or modifications not expressly approved by the party responsible for
compliance could void user's authority to operate the equipment.
ŝ8Ş
System chart
Please check that you have the correct contents before using this product. To buy the optional
equipment, contact your nearest Samsung dealer or Samsung service centre.
Pouch
User manual
Product warranty
Camera strap Software CD
(see p.103)
SD memory card/MMC
(see p.15)
DPOF compatible printer
(see p.75)
Rechargeable battery
(SBP-1303)
Rechargeable batteries
(SNB-2312)
CR-V3 battery
Battery charger
(SBC-L1)
Battery charger
(SBC-N1)
AC cord
AA Alkaline
Batteries
< Included items >
ŝ9Ş
System chart
For Windows
ҮPC with processor better than
Pentium II 450MHz (XP : Pentium 700MHz)
ҮWindows 98/ 98SE/ 2000/ ME/ XP
ҮMinimum 64MB RAM (XP : 128MB)
Ү200MB of available hard-disk space
(Over 1GB recommend)
ҮUSB port
ҮCD-ROM drive
Ү1024 x768 pixels, 16-bit colour display
compatible monitor (24-bit colour display
recommended)
ҮDirectX 9.0 or later
For Macintosh
ҮPower Mac G3 or later
ҮMac OS 9.0~10.2
ҮMinimum 64MB RAM
Ү110MB of available hard-disk space
ҮUSB port
ҮCD-ROM drive
ҮQuickTime player or a media player that
supports AVI file format
ҮDivX (for movie clip)
System Requirements
When you connect the camera to a
computer or printer, you have to use the
USB cable supplied with the camera, or the
external devices may not recognise the
camera.
CAUTION
USB cable
PictBridge compatible
printer(see p.63)
Computer
(see p.112)
ŝ14Ş
Battery status
Battery indicator
The battery are fully
charged
Prepare new battery
There is no battery capacity.
Replace with new battery.
ƈ There are 3 indicators for battery condition that are displayed on the LCD monitor.
ƃ When the battery chamber cover is opened, do not press the battery chamber cover by
force. This may cause the battery chamber cover modification or breakage.
INFORMATION
Connecting to a Power Source
3. To close the battery chamber cover, push it until it clicks.
2. Insert the batteries taking note of the
polarity (+/ -).
1. Open the battery chamber cover by pushing in the direction of the
arrow.
: If the camera does not turn on after you have inserted batteries,
please check whether the batteries are inserted with the correct
polarity (+/ -).
Using the batteries
[
Inserting the AA type battery
][
Inserting the CR-V3 type battery
]
ŝ17Ş
Inserting the memory card
3. To close, push the battery chamber cover until you hear a
click. If the memory card does not slide in smoothly, do
not attempt to insert it by force. Check the direction of
insertion, and then insert it correctly. Do not insert the
memory card the wrong way round. Doing so may
damage the memory card slot.
2. Have the front of the memory card facing toward the front
of the camera (lens) and the card pins toward the back of
the camera (LCD monitor), and then push the memory
card into the card slot until you hear a click.
1. Turn off the camera’s power and pull the battery chamber
cover in the direction of the arrow to open.
1. Turn the power off using the power button.
Open the battery chamber cover and press the memory
card as shown in the image and release.
2. Remove the memory card and close the battery chamber
cover.
Removing the memory card
ƃ When the camera is turned on, inserting or removing the memory card turns the camera
power off.
INFORMATION
ŝ18Ş
LCD monitor indicator
ƈ The LCD monitor displays information about the shooting functions and selections.
[Image & Full Status]
No. Description Icons Page
2 Battery p.14
3 Continuous shot AEB p.54
4 Flash p.33
5 Self-timer p.35
6 Macro p.31
7 Metering p.54
8 Card inserted indicator -
9 Auto focus frame -
10 Camera shake warning -
11 Date/ Time 2005.07.01 01:00 PM p.88
12 Exposure compensation p.47
13 ISO p.46
14 White Balance p.46
15 RGB RGB p.45
16 Sharpness p.55
Recording mode
1
p.51
ڹ
ں
ڻ
ڼ
ڽ
ھ
ڿ
ۀ
ۅ
ۄ
ۆ
ۇ
؆
؅
؇
؈
ۂہ ۃ
؊
؉
ŝ19Ş
LCD monitor indicator
Changing the recording mode
ƈ You can select the desired working mode by the M (mode) button located on the back of the
camera and [MODE], [MODE SET] menu. Auto, Program, movie clip, scene (night, portrait,
children, landscape, close-up, sunset, dawn, backlight, fireworks, beach & snow) camera
modes are available.
STILL & MOVIE
FULL
CUSTOM
MODE
17 Image quality p.53
Number of available shots remaining 15 p.16
Remaining time (Movie clip/ Voice recording)
00:01:30/ 01:00:00 p.16
20 Voice memo/ Mic. off p.30/23
19
18
p.52
Image size
Optical/ Digital Zoom bar/
Digital Zoom rate
21
p.27
ƃSelecting the [MODE] menu
1. Insert the battery (p.14).
2. Insert the memory card (p.17). As this camera has a 10MB internal memory, you do not
need to insert the memory card. If the memory card is not inserted, an image will be stored
in the internal memory. If the memory card is inserted, an image will be stored on the
memory card.
3. Close the battery chamber cover.
4. Press the power button to turn on the camera.
5. Press the menu button and a menu will display.
6. Use the Left/ Right button to select the [MODE] menu.
7. Select [STILL & MOVIE], [FULL] or [CUSTOM] sub menu
by pressing the UP/DOWN button.
- [STILL & MOVIE] : A still image mode that was selected on
the [MODE SET] menu and movie clip
mode can be selected.
Refer to page 51 for more information about using the [MODE SET] menu.
- [FULL] : Auto, Program, Movie clip and scene modes can be selected.
- [CUSTOM] : Modes set as on in the [MODE SET] menu can be selected.
8. Press the MENU button and the menu will disappear.
ŝ20Ş
Changing the recording mode
ƃ Changing the recording mode : If the [STILL & MOVIE] menu was selected
Steps from 1-4 are the same as those for selecting the [MODE] menu.
5. A recording mode used just before will display.
6. Press the M (Mode) button located on the back of the camera and the recording mode will
change to the movie clip mode.
7. Press the M (Mode) button again and a still image mode selected on the [MODE SET]
menu will be selected.
ƃ Changing the recording mode : If the [FULL] menu was selected
Steps from 1-4 are the same as those for selecting the [MODE] menu.
5. A recording mode used just before will display.
6. Press the M (Mode) button located on the back of the camera and the mode selection
menu will display.
7. To select the Auto, Program, Movie clip or Scene modes, press the Left/ Right button.
To move between the Auto, Manual, Movie clip menu line and Scene menu line, press the
Up/ Down button.
8. Press the M (Mode) button and the mode selection menu will disappear.
Pressing the M (Mode) button
[AUTO mode]
[MOVIE CLIP mode]
Pressing the Up button
NIGHT
[Selecting the Scene mode]
Pressing the Left button
[Mode selection menu]
AUTO
MOVIE
[Selecting the Movie clip mode]
MENU/OK:SET
MENU/OK:SET
MENU/OK:SET
ŝ21Ş
Changing the recording mode
ƃ Changing the recording mode : If the [CUSTOM] menu was selected
Steps from 1-4 are the same as those for selecting the [MODE] menu.
5. A recording mode used just before will display.
6. Press the M (Mode) button located on the back of the camera and the mode selection
menu will display.
7. You can select modes set as on in the [MODE SET] menu by pressing the Up/ Down/ Left/
Right buttons. Refer to page 51 for more information about using the [MODE SET] menu.
8. Press the M (Mode) button and the mode selection menu will disappear.
Pressing the Up button
NIGHT
[Selecting the Scene mode]
Pressing the Left button
[Mode selection menu]
AUTO
MENU/OK:SET
MOVIE
[Selecting the Movie clip mode]
MENU/OK:SET
MENU/OK:SET
ŝ22Ş
Starting the recording mode
ƈ How to use the Auto mode
Use this for shooting basic still images.
1. Select the [FULL] sub menu on the [MODE] menu (p.19).
2. Select the Auto mode by pressing the M (Mode) button
(p.20).
3. Point the camera towards the subject and compose the
image by using the LCD monitor.
4. Press the shutter button to capture an image.
ƈ How to use the Movie clip mode
A movie clip can be recorded for as long as the available recording time of the memory
capacity allows.
1. Select the [FULL] sub menu on the [MODE] menu (p.19).
2. Select the Movie clip mode by pressing the M (Mode)
button (p.20).
3. Point the camera towards the subject and compose the
image by using the LCD monitor.
4. Press the shutter button once and movie clips are
recorded for as long as the available recording time
allows. Movie clips will still be recorded if the shutter
button is released. If you wish to stop recording, press the
shutter button again.
ſ Image size and type are listed below.
- Image size : 640X480, 320X240, 160X128 (user selectable)
- Movie clip file type : AVI (MPEG-4)
ƃ If the auto focus frame turns to red when you press the shutter button down half way, it
means that the camera cannot focus on the subject. Should this be the case, the camera
is less likely to capture an image clearly.
ƃ Avoid obstructing the lens or the flash when you capture an image.
INFORMATION
[AUTO mode]
[MOVIE CLIP mode]
ŝ23Ş
ƈ How to use the Program mode
Selecting the automatic mode will configure the camera with optimal settings and you can
manually configure various functions.
1. Select the [FULL] sub menu on the [MODE] menu (p.19).
2. Select the Program mode by pressing the M (Mode)
button (p.20).
3. Point the camera towards the subject and compose the
image by using the LCD monitor.
4. Press the shutter button to capture an image.
[PROGRAM mode]
Starting the recording mode
ƈ Pausing while recording a movie clip (Successive Recording)
This camera allows you to temporarily stop during unwanted scenes, while recording a movie
clip. Using this function, you can record your favourite scenes into a movie clip without having
to create multiple movie clips.
ƃ Using Successive Recording
Steps from 1-2 are the same as those for MOVIE CLIP
mode.
3. Point the camera towards the subject and compose the
image by using the LCD monitor. Press the shutter
button and movie clips are recorded for as long as the
available recording time. Movie clips will still be recorded
if the shutter button is released.
4. Press the Pause button( ) to pause recording.
5. Press the Pause button( ) again to resume the
recording.
6. If you wish to stop recording, press the shutter button again.
ƈ Recording the movie clip without voice
You can record the movie clip without voice.
Steps from 1-3 are the same as those for MOVIE CLIP
mode.
4. Press the Up button and the ( ) icon will display on the
LCD monitor.
5. Press the shutter button and movie clip is recorded for as
long as the available recording time without voice.
6. To stop the recording, press the shutter button again.
[
Successive recording of a movie clip
]
ŝ24Ş
Starting the recording mode
ƈ How to use the Scene modes
Use the menu to easily configure optimal settings for a variety of shooting situations.
1. Select the [FULL] sub menu on the [MODE] menu (p.19).
2. Select the Scene mode by pressing the M (Mode) button (p.20).
3. Point the camera towards the subject and compose the
image by using the LCD monitor.
4. Press the shutter button to capture an image.
ſ The scene modes are listed below.
[NIGHT]( ) : Use this for shooting still images at
night or in other dark conditions.
[PORTRAIT]( ) : To take a picture of a person.
[CHILDREN]( ) : To take a picture of fast moving objects, for example, children.
[LANDSCAPE]( ) : To take pictures of distant scenery.
[CLOSE UP]( ) : Close-up shooting for small objects such as plants and insects.
[SUNSET]( ) : For taking pictures of sunsets.
[DAWN]( ) : Daybreak scenes.
[BACKLIGHT]( ) : Portrait without shadows caused by backlight.
[FIREWORKS]( ) : Firework scenes.
[
BEACH&SNOW
]( ) : For ocean, lake, beach and snowscape scenes.
[SCENE mode]
ŝ25Ş
Starting the recording mode
ƃA distance of 40cm between you and the camera (microphone) is the best distance to
record sound.
ƃIf the camera power is turned off while the voice recording is paused, the voice recording
is cancelled.
INFORMATION
ƈHow to use the VOICE RECORDING mode
A voice recording can be recorded for as long as the available recording time of the memory
capacity allows. (Max: 1 hour)
1. In any mode with the exception of the Movie clip, select the
VOICE RECORDING mode by pressing the Voice
recording button twice.
2. Press the shutter button to record a voice.
- Press the shutter button once and voice is recorded for as
long as the available recording time (Max : 1 hour) allows.
The recording time will be displayed on the LCD monitor.
Voice will still be recorded if the shutter button is released.
- If you wish to stop recording, press the shutter button again.
- File type : WAV
ƃPausing while recording a voice recording
This camera allows you to temporarily stop during unwanted recording, while recording a
voice. Using this function, you can record your favorite voices into a voice recording file
without having to create multiple voice recording files.
1. Press the shutter button and voice is recorded for as long
as the available recording time. Voice will still be recorded if
the shutter button is released.
2. Press the Pause button( ) to pause recording.
3. Press the Pause button( ) again to resume the
recording.
4. If you wish to stop recording, press the shutter button
again.
[VOICE RECORDING mode]
[Pausing the voice recording]
ŝ26Ş
Things to Watch Out for When Taking Pictures
ƈ Pressing the shutter button down half way
Lightly press the shutter button to confirm focus and flash battery charge.
Press the shutter button all way down to take the picture.
ƈ The available recording time may vary depending on shooting conditions and camera
settings.
ƈ When the Flash Off or Slow synchro mode is selected in a low lighting condition, the camera
shake warning indicator ( ) may appear on the LCD monitor. In this case, use a tripod,
support the camera on a solid surface or change the flash mode to flash shot mode.
ƈ Backlight compensated shots : When taking an outdoor shot, avoid facing the sun, as the
image may be dark because of the strong backlight.
To take a picture against the sun, please use the
[BACKLIGHT] in the scene shooting mode (see page 24),
Fill-in flash (see page 33), Spot metering (see page 54), or
Exposure compensation (see page 47).
ƈ Avoid obstructing the lens or the flash when you capture an image.
ƈ Under certain conditions the auto focus system may not perform as expected.
- When photographing a subject that has little contrast.
- If the subject is highly reflective or shiny.
- If the subject is moving at high speed.
- When there is strong reflected light, or when the background is very bright.
- When the subject matter has only horizontal lines or the subject is very narrow
(such as a stick or flagpole).
- When the surroundings are dark
[ Lightly press the shutter button ] [ Press the shutter button ]
ŝ27Ş
Using the camera buttons to adjust the camera
ƈ The recording mode function can be set up by using the camera buttons.
POWER button
SHUTTER button
ƃ If the menu is not displayed, this button works as the
OPTICAL ZOOM or DIGITAL ZOOM button.
ƃ Used for turning the camera’s power on / off.
ƃ If there is no operation during the specified time, the
camera's power will be turned off automatically to save
battery life. Refer to page 86 for more information about the
auto power off function.
ƃ Used for taking an image or recording voice in the
recording mode.
ƃ In MOVIE CLIP mode
Pressing the shutter button down fully starts the process for
recording a movie clip. Press the shutter button once and
the movie clip is recorded for as long as the available
recording time in the memory allows. If you wish to stop
recording, press the shutter button again.
ƃ In STILL IMAGE mode
Pressing the shutter button down halfway activates the autofocus and checks the condition of
the flash.
Pressing the shutter down fully takes the image and stores the relevant data regarding the
shot. If you select voice memo recording, the recording will start after the camera has finished
storing the image data.
ZOOM W/ T button
ŝ28Ş
ZOOM W/ T button
ƈ This camera has a 3X optical zoom and a 4X digital zoom function. Using both will offer a
total zoom ratio of 12X.
ƃ TELE Zoom
Optical zoom TELE : Pressing the ZOOM T button. This will zoom into the subject i.e.
the subject will appear nearer.
Digital zoom TELE : When the maximum (3X) optical zoom is selected, pressing the
ZOOM T button activates the digital zoom software. Releasing
ZOOM T button stops the digital zoom at the required setting.
Once the maximum digital zoom (4X) is achieved, pressing the
ZOOM T button will have no effect.
[ WIDE zoom ] [ TELE zoom ]
[ Digital zoom 4.0X ]
Pressing the
ZOOM T button
Pressing the
ZOOM T button
ƃ WIDE Zoom
Optical zoom WIDE : Pressing the ZOOM W button. This will zoom out from the subject
i.e. the subject will appear further away. Pressing the ZOOM W
button continuously will set the camera to its minimum zoom
setting i.e. the subject appears at its furthest from the camera.
Digital zoom WIDE : When the digital zoom is in operation, pressing the ZOOM W
button will reduce the digital zooming in steps.
Releasing ZOOM W button stops digital zooming.
Pressing the ZOOM W button will reduce the digital zoom and
then it will continue to reduce the optical zoom until the minimum
setting is reached.
[ TELE zoom ] [ Optical zoom 2X ] [ WIDE zoom ]
Pressing the
ZOOM W button
Pressing the
ZOOM W button
[ Digital zoom 4.0X ]
[ TELE zoom ] [ WIDE zoom ]
Pressing the
ZOOM W button
Pressing the
ZOOM W button
Optical zoom
Digital zoom
ŝ29Ş
ZOOM W/ T button
ƃ Images taken using the digital zoom may take a little longer for the camera to process.
Allow time for this to take place.
ƃ You may notice a decrease in image quality when using the digital zoom.
ƃ To view more clear digital zoom image, press the shutter button halfway at the maximum
(3X) optical zoom position and press the zoom T button again.
ƃ The digital zoom can’t be activated in the [NIGHT], [CHILDREN], [CLOSE UP] and
[FIREWORKS] scene modes.
ƃ The digital zoom cannot be used in movie clip shots.
ƃ If the Zoom buttons are being pressed during the Movie clip shots, the voice will not
recorded.
ƃ Take care not to press the lens, lens cover and camera by force. This may cause the
camera malfunction.
INFORMATION
ŝ30Ş
Voice recording( )/ Voice memo( )/ UP button
ƃ A distance of 40cm between you and the camera (microphone) is the best distance to
record sound.
INFORMATION
ƈ While the menu is showing, press the UP button to move up the submenu cursor.
When the menu is not displayed on the LCD monitor, the UP button operates as the voice
recording or voice memo button. You can record your voice or add your
voice-over to a stored still image. Refer to page 25 for more information about the voice
recording.
ƃ Recording a voice memo
1. Press the M (Mode) button to select a Recording mode with the exception of Movie clip
mode.
2. Press the Voice memo ( ) button. If the voice memo indicator is displayed on the LCD
monitor, the setting is completed.
3. Press the shutter button and take a picture.
The picture is stored on the memory.
4. Voice memo will be recorded for ten seconds from the
moment the picture is stored. In the middle of the voice
recording, pressing the shutter button will stop the voice
memo.
Pressing the Voice memo button
15
[Recording Voice Memo]
ŝ31Ş
Macro( )/ Down button
ƈ While the menu is showing, press the DOWN button to move from the main menu to a
submenu, or to move down the submenu cursor. When the menu is not showing, you can
use the MACRO/ DOWN button to take macro pictures. The distance ranges are shown
below. Press the Macro button until the desired macro mode indicator displays on the LCD
monitor.
[Auto macro ( )][Macro ( )]
[Auto focus - No icon]
ƃ When the macro mode is selected, it is possible that camera shake will occur. Take care
not to shake the camera.
ƃ When you take a picture within 30cm in the Macro mode, select the FLASH OFF mode.
INFORMATION
ƈ Types of focus modes and focus ranges (W: Wide, T: Tele) (Unit : cm)
ſ See the next page for the available focusing method, by recording mode.
Mode
Focus Type Auto macro ( ) Macro ( ) Normal
Focus range
W : 5~Infinity
T : 50~Infinity
W : 80~Infinity
T : 80~Infinity
W : 5~80
T : 50~80
Program ( )
Auto ( )
ŝ32Ş
Macro( )/ Down button
ƈ
Available focusing method, by recording mode ( O: Selectable , X: Not selectable, : Infinity focus range)
ƈ To focus on the subject positioned outside of the centre, use the focus lock function.
ƃ Using the Focus Lock
1. Ensure the subject in the centre of the autofocus frame.
2. Press the SHUTTER button halfway. When the green auto focus frame lights up, it means
the camera is focused on the subject. Be careful not to press the SHUTTER button all the
way down to avoid taking an unwanted picture.
3. With the SHUTTER button still pressed down only halfway, move the camera to
recompose your picture as desired, and then press the SHUTTER button completely to
take the picture. If you release your finger from the SHUTTER button, the focus lock
function will be cancelled.
1. The image to be
captured.
2. Press the SHUTTER
button halfway and
focus on the subject.
3. Recompose the picture
and fully depress the
SHUTTER button.
Focus lock
OXO
OXO
XOX
SCENE
Mode
Normal
Macro
Auto macro
Normal
Macro
Auto macro
Mode
OOOū X ūūO ū O
XXXXOXXXX X
XXXXX XXXX X
ŝ33Ş
Flash ( )/ Left button
[Selecting the Auto flash]
ƃ Flash range (Unit : m)
ƈ When the menu is displayed on the LCD monitor, pressing
the LEFT button makes the cursor shift to the left tab.
ƈ When the menu is not displayed on the LCD monitor, the
LEFT button operates as the FLASH ( ) button.
ƃ Selecting the flash mode
1. Press the M (Mode) button to select a Recording mode
with the exception of Movie clip mode (p.20).
2. Press the Flash button until the desired flash mode
indicator displays on the LCD monitor.
3. A flash mode indicator will be displayed on the LCD monitor.
Use the correct flash to suit the environment.
ƃ If you press the shutter button after selecting the Auto, Fill-in, Slow sychro flash, the first
flash fires to check the shooting condition (Flash range and Power ratio of flash).
Do not move until the second flash fires.
ƃ Using the flash frequently will reduce the life of the battery.
ƃ Under normal operating conditions the charging time for the flash is normally within 5
seconds. If the battery is weak, the charging time will be longer.
ƃ During the continuous shot, AEB and movie clip mode, the flash function will not operate.
ƃ Take photographs within the flash range.
ƃ The image quality is not guaranteed if the subject is too close or highly reflective.
INFORMATION
Normal
WIDE TELE WIDE TELE WIDE TELE
0.8 ~ 2.0 0.8 ~ 1.5 0.25 ~ 0.8 0.5 ~ 0.8 0.25 ~ 2.0 0.5 ~ 1.5
Macro
Auto macro
ISO
AUTO
ŝ34Ş
Flash ( )/ Left button
Menu tab Flash mode Description
ƃ Flash mode indicator
If the subject or background is dark, the camera flash will operate
automatically.
Auto flash
Auto &
Red eye
reduction
Fill in flash
Slow synchro
Flash off
If a subject or background is dark, the camera flash will work
automatically and will reduce the red-eye effect by using the red-
eye reduction function.
The flash will operate in conjunction with a slow shutter speed in
order to obtain the correct exposure. When you take an image in
a condition with poor light, the camera shake warning indicator
( ) will display on the LCD monitor.
We recommend using a tripod for this function.
The flash fires regardless of available light.
The intensity of the flash will be controlled, according to the
prevailing conditions. The brighter the background or subject is,
the less intense the flash will be.
The flash does not fire. Select this mode when capturing images
in a place or situation where flash photography is prohibited.
When you capture an image in a poorly lit condition, the camera
shake warning indicator ( ) will display on the LCD monitor.
We recommend using a tripod for this function.
ƃ Available flash mode, by recording mode
XXOXXXXXXXXXO
XOOXOOXXXXXXX
XXOXXXXXXXOXX
XXOOXXXXXXXXX
OOOOOOOOOOXO X
ŝ35Ş
Self-timer ( )/ Right button
ƈ When the menu is displayed on the LCD monitor, pressing the Right button makes the cursor
shift to the right tab. The right button can also be used to move to a sub menu to select a
different setting. When the menu is not displayed on the LCD monitor, the Right button
operates as the Self-timer. This function is used when the photographer would also like to be
in the image.
ƃ Using the self-timer
1. Press the M (Mode) button to select a still image mode or movie clip mode (p.20).
2. Press the Self-timer button until the desired mode indicator displays on the LCD monitor.
In Movie clip mode, only the 10 Sec. self-timer can be used.
- 2 Sec. Self-timer( ) : Pressing the shutter button will allow an interval of 2 seconds
before the image is taken.
- 10 Sec. Self-timer( ) : Pressing the shutter button will allow an interval of 10 seconds
before the image is taken.
- Double Self-timer( ) : A picture will be taken after about 10 seconds and 2 seconds
later a second picture will be taken. When using the flash, the
2-second self-timer may be delayed for longer than 2 seconds
depending on the flash charge time.
3. When you press the Shutter button, the picture will be taken after the specified time has
elapsed.
ſ If you operate the Power button, Self-timer button and Shutter button during the self-timer
operation, the self-timer function is cancelled.
Pressing the Self-timer button
[2 Sec. self-timer]
Pressing the Self-timer
[10 Sec. self-timer][Double self-timer]
ŝ36Ş
MENU/ OK button
ƈ MENU button
- When you press the MENU button, a menu related to each camera mode will be displayed
on the LCD monitor. Pressing it again will return the LCD to the initial display.
- A menu option can be displayed when the following are selected :
MOVIE CLIP and STILL IMAGE mode. There is no menu available when the VOICE
RECORDING mode is selected.
ƈ OK button
- When the menu is displayed on the LCD monitor, this button is used for shifting the cursor
to the sub menu or for confirming data.
Pressing the MENU button
[Menu off]
[Auto mode]
[Menu on]
[Movie clip mode]
ƈ You can turn on the camera with this button. Pressing the M button for more than 3 seconds
changes the buzzer and start-up sound setting to OFF, even though you may have set these
to ON.
ƈ You can select the desired recording mode. The selectable recording modes are different
from what you selected sub menu in the [MODE] menu.
- [STILL & MOVIE] : A recording mode selected in the [MODE SET] menu, Movie clip mode
- [FULL] : Auto, Movie clip, Program, Scene modes
- [CUSTOM] : Modes set as on in the [MODE SET] menu
ƃ How to use the mode button : In case of [STILL & MOVIE] and [AUTO] sub menu
[Pressing the M button]
M (Mode) button
2592X1944
2272X1704
2048X1536
1600X1200
1024X768
640X480
4M
3M
2M
1M
VGA
SIZE
ŝ37Ş
M (Mode) button
[Pressing the Up button]
ƃ How to use the mode button : In case of [FULL] sub menu and Auto mode
ſ Press the Mode button and the mode selection menu will disappear.
[Pressing the Right button]
[Pressing the Left/Right button]
[Pressing the Left button]
[Auto mode]
[Program mode]
[Mode selection menu]
[Movie cliip mode]
[Scene mode]
[Pressing the Mode button]
[Selecting a scene mode]
NIGHT
PORTRAIT
MOVIE
PROGRAM
AUTO
MENU/OK:SET
MENU/OK:SET
MENU/OK:SET
MENUOK:SET
MENU/OK:SET
ŝ38Ş
M (Mode) button
[Pressing the Right button]
ƃ How to use the mode button : In case of [CUSTOM] sub menu and Auto mode
ſ Press the Mode button and the mode selection menu will disappear.
ſ The illustrated images and modes are for your
information.
They can be changed as the [MODE SET] menu
setting.
[Pressing the Up button]
[Pressing the Down button]
[Auto mode]
[Night scene mode]
[Mode selection menu]
[Portrait scene mode]
[Pressing the Mode button]
[Program mode]
AUTO
MENU/OK:SET
NIGHT
PROGRAM
MENU/OK:SET
MENU/OK:SET
PORTRAIT
MENU/OK:SET
ŝ39Ş
E (Effect) button
ƈIt is possible to add special effects to your images by using this button
ƈStill image mode : You can select the colour, focus, composite and frame menus.
Movie clip mode : You can select the colour and stabilizer menus.
ſ This button will not operate in the Voice recording mode and some scene modes
(Night, Sunset, Dawn, Backlight, Fireworks and Beach & Snow)
If a special effect is selected, the rest special effect functions set before are cancelled
automatically.
ƈEven if the camera is turned off, the special effect setting will be preserved.
To cancel the special effect, select the [OFF] sub menu of each menu.
ƈBy using the camera’s digital processor, it is possible to add special effects to your images
1. Press the E button in the still image mode or Movie clip mode.
2. Select the COLOR menu by pressing the Left/ Right button.
Special Effect : Colour
[Still image mode] [Movie clip mode]
ƈAvailable Effects, by recording mode ( O : Selectable X : Not selectable)
OOOOOOO
XXOXXXX
XXOXXXX
XXOXXXX
OXXXXXX
ŝ40Ş
Special Effect : Colour
ƈYou can make the subject stand out from its surroundings.
The subject will be sharp and in focus while making the rest
out of focus.
1. Press the E button in the program mode.
2. Select the FOCUS menu by pressing the Left/ Right
button.
3. Select a desired sub menu by pressing the Up/ Down
button and press the OK button.
4. The preset focus frame will appear.
Press the shutter button to capture an image
3. Select a desired sub menu by pressing the Up/Down button and press the OK button.
: No effect is added to the image
: Captured images will be stored in black and white.
:
Captured images will be stored in a sepia tone (a gradient of yellowish brown colours).
: Captured images will be stored in a red tone.
: Captured images will be stored in a green tone.
: Captured images will be stored in a blue tone.
: Save the image in negative mode.
4. Press the shutter button to capture an image.
[Range 1]
[Range 3]
[Range 4]
[Range 2]
Special Effect : Preset focus frames
ŝ41Ş
Special Effect : Composite shooting
ƈ You can combine 2 ~ 4 different shots in a still image.
1. Press the E button in the program mode.
2. Select the COMPOSITE menu by pressing the Left/ Right
button.
3. Select a desired sub menu by pressing the Up/ Down
button and press the OK button.
- : cancels the composite shooting
- : 2 different shots are combined in a still image.
- : 3 different shots are combined in a still image.
- : 4 different shots are combined in a still image.
- : 2 different panorama shots are combined in a still image.
4. The number of frames you selected in step 3 is displayed on the LCD monitor.
Press the shutter button to start the composite shooting
ſ You can use the flash button, self-timer button, macro button, voice memo button and the
Zoom W/T button during the composite shooting.
ſ If you press the camera buttons (Play mode button, M button and Menu button) during the
composite shots, each mode of the camera buttons is executed. The images captured before
will be deleted.
ſ The voice memo will start after taking the last composite shooting.
[Ready for taking]
Pressing the
shutter button
[First shot]
Pressing the
shutter button
[Second shot] [The final picture]
ſ Selecting 2 composite shooting
5. After taking the last shot, the image will be saved.
ŝ43Ş
Special Effect : Photo Frame
ƈYou can add 9 types of frame-like borders to a still image you want to capture.
1. Press the E button in the program mode.
2. Select the FRAME menu by pressing the Left/ Right button.
3. Select a desired sub menu by pressing the Up/ Down
button and press the OK button.
- : The photo frame will not be added.
4. The photo frame will appear.
Press the shutter button to capture an image
F1 F2 F3
F4 F5 F6
F7 F8 F9
ŝ44Ş
Movie Clip frame stabilizer
ƈ This function helps stabilize images captured during movie recording.
You can select this menu only in the MOVIE CLIP mode.
If the memory card is not inserted, this function will not operate.
ƃ How to use this function
1. Press the E button in the Movie clip mode.
2. Select the STABILIZER menu by pressing the Left/ Right
button.
3. Select a desired sub menu by pressing the Up/ Down
button and press the OK button.
- : Movie clip frame stabilizer function becomes
disabled.
- : Prevents camera shake during movie recording.
The recording frame range will become narrower than when you select the
menu. Pre-view frames may not display smoothly on the LCD monitor.
ƃ When you select the sub menu, the movie clip frame range will be narrow
depending on the movie clip size.
INFORMATION
ŝ45Ş
+/- button
ƈYou can use the +/- button to adjust the values for the RGB, ISO, white balance and
exposure compensation.
ƈRGB : Allows the user to adjust the R (Red), G (Green), and B (Blue) values of the images to
be captured.
ƃSetting RGB Values
1. Press the +/- button, and then use the UP and DOWN
buttons to select the RGB icon ( ).
The RGB menu bar will appear as shown.
2. Use the UP/ DOWN/ LEFT and RIGHT buttons to select
the desired RGB value.
- Up/ Down Button : Navigates between R, G, and B icons.
- Left/ Right Button : Changes value of each icon.
3. When you press the +/- button again, the value you set will
be saved and RGB setup mode will end.
Main menu Sub menu Available camera mode
RGB R (Red), G (Green), B (Blue)
ISO AUTO, 50, 100, 200, 400
Exposure compensation -2.0 ~ 0.0 ~ +2.0 (0.5EV steps)
WHITE BALANCE
AUTO, DAYLIGHT, CLOUDY,
FLUORESCENT H,
FLUORESCENT L, TUNGSTEN,
CUSTOM.
ŝ47Ş
+/- button
ƃ Using the Custom White Balance
White balance settings may vary slightly depending on the shooting environment.
You can select the most appropriate white balance setting for a given shooting environment
by setting up the custom white balance.
1. Select the CUSTOM ( ) menu of the White
Balance.
2. Place a sheet of white paper in front of the camera so
that the LCD monitor shows only white, and then press
the SHUTTER button.
3. Press the OK button and your custom white balance
value is stored.
- The custom white balance value will be applied,
starting with the next picture you take.
- The user configured white balance will be remain
effective until it is overwritten.
[ White paper ]
ƈ Exposure compensation : This camera automatically adjusts the exposure according to the
ambient lighting conditions.
You can also select the exposure value by using the +/- button.
ƃ Compensating Exposure
1. Press the +/- button, and then use the UP and DOWN
buttons to select the exposure compensation icon
( ). The exposure compensation menu bar will
appear as shown.
2. Use the LEFT and RIGHT buttons to set the desired
exposure compensation factor.
3. Press the +/- button again. The value you set will be
saved and the Exposure Compensation setup mode will close. If you change the exposure
value, the exposure indicator ( ) will be displayed on the bottom of the LCD monitor.
ſ A negative exposure compensation value reduces the exposure.
Note that a positive exposure compensation value increases the exposure and the LCD
monitor will appear white or you may not get good pictures.
ŝ49Ş
Using the LCD monitor to adjust the camera settings
ſ Menus are subject to change without prior notice.
Menu tab Main menu Sub menu Camera working mode Page
FRAME RATE 30 FPS 15 FPS p.53
METERING MULTI SPOT p.54
SINGLE CONTINUOUS
AEB -
SOFT NORMAL
VIVID -
FULL OSD BASIC OSD
SAVE MODE -
SHARPNESS
SHOOTING
OSD
INFORMATION
p.55
p.54
p.55
ŝ50Ş
How to use the menu
3. Use the UP and DOWN buttons to select a sub menu.
4. Select a sub menu, and then the value you set will be saved. Press the MENU button and
the menu will disappear.
ƈ You can select the desired working mode by the M (Mode) button located on the back of the
camera and [MODE] menu. Auto, Program, Movie clip, Scene (night, portrait, children,
landscape, close-up, sunset, dawn, backlight, fireworks, beach & snow) camera modes are
available.
- [STILL & MOVIE] : A still image mode that was selected on
the [MODE SET] menu and movie clip
mode can be selected.
- [FULL] : Auto, Program, Movie clip and scene
modes can be selected.
- [CUSTOM] : You can select modes set as on in the
[MODE SET] menu
1. Turn on the camera and press the MENU button. A menu for each camera mode appears.
However, there is no menu for Voice Recording mode ( ).
2. Use the LEFT and RIGHT buttons to navigate through the menus.
Press the LEFT
or RIGHT button.
Press the LEFT
or RIGHT button.
Mode
Press the UP or
DOWN button.
Press the UP or
DOWN button.
2592X1944
2272X1704
2048X1536
1600X1200
1024X768
640X480
SIZE
MULTI
SPOT
METERING
S.FINE
FINE
NORMAL
QUALITY
4M
3M
2M
1M
VGA
2592X1944
2272X1704
2048X1536
1600X1200
1024X768
640X480
SIZE
4M
3M
2M
1M
VGA
2592X1944
2272X1704
2048X1536
1600X1200
1024X768
640X480
SIZE
5M
3M
2M
1M
VGA
2592X1944
2272X1704
2048X1536
1600X1200
1024X768
640X480
SIZE
5M
4M
2M
1M
VGA
STILL & MOVIE
FULL
CUSTOM
MODE
ŝ51Ş
MODE SET
ƈYou can select the desired recording mode.
ƈIf you select the [CUSTOM] sub menu in the
[MODE SET] menu, you can select modes set as on in this
menu by pressing the M button.
- The maximum custom modes you can select are 7 and the
minimum custom modes are 3.
- If you select over 7 custom modes, the menus are set as
off automatically from the lower placed sub menu.
[AUTO] : For shooting basic still image
[PROGRAM] : You can manually configure all functions.
[MOVIE] : For taking a movie clip
[NIGHT] : Use this for shooting still images at night or in other dark conditions.
[PORTRAIT] : To take a picture of a person.
[CHILDREN] : To take a still picture of moving children.
[LANDSCAPE] : Scenery with green woods or blue sky.
[CLOSE UP] : Close-up shooting for small objects such as plants and insects.
[SUNSET] : For taking pictures of sunsets.
[DAWN] : Daybreak scenes.
[BACKLIGHT] : Portrait without shadows caused by backlight.
[FIREWORKS] : Firework scenes.
[
BEACH&SNOW
]: For ocean, lake, beach and snowscape scenes.
ƃ When [NIGHT], [LANDSCAPE], [CLOSE UP], [SUNSET], [DAWN] and [FIREWORKS]
scene mode are selected, it is possible that camera shake will occur. In this case, you
should use a tripod.
INFORMATION
ON
ON
ON
ON
ON
AUTO
PROGRAM
MOVIE
NIGHT
PORTRAIT
MODE SET
EXIT:MENU MOVE:
Ɗ
ƌ
ŝ52Ş
Size
ƈ You can select the image size appropriate for your application.
Icon 5M 4M 3M 2M 1M VGA 640 320 160
Size
2592X1944 2272X1704 2048X1536
1600X1200
1024X768
640X480
640X480 320X240 160X128
STILL IMAGE modeMode MOVIE CLIP mode
ƃ The higher the resolution, the lower the number of available shots will be because high
resolution images require more memory than lower resolution images.
INFORMATION
[ MOVIE CLIP mode ][ STILL IMAGE mode ]
640X480
320X240
160X128
SIZE
2592X1944
2272X1704
2048X1536
1600X1200
1024X768
640X480
4M
3M
2M
1M
VGA
320
160
SIZE
ŝ53Ş
Quality/ Frame rate
ƈ You can select the compression ratio appropriate for your application of the captured images.
The higher the compression ratio, the lower the picture quality.
Mode
Icon
Sub menu S.FINE FINE NORMAL 30FPS 15FPS
File Format jpeg jpeg jpeg avi avi
STILL IMAGE mode MOVIE CLIP mode
ƃ S.FINE is the highest quality and NORMAL is the lowest setting.
Choose the setting appropriate for your needs.
ƃ This file format complies with the DCF(Design rule for Camera File system).
ƃ JPEG (Joint Photographic Experts Group) :
JPEG is the image compression standard developed by the Joint Photographic Experts
Group. This type of compression is most commonly used for compressing photos and
graphics because it can compress the files efficiently without damaging the data.
INFORMATION
[ STILL IMAGE mode ] [ MOVIE CLIP mode ]
15 FPS
30 FPS
FRAME RATE
S.FINE
FINE
NORMAL
QUALITY
ŝ54Ş
ƈ Select the number of pictures in continuous shooting.
- [SINGLE] : Take one picture only
- [CONTINUOUS] : Images will be taken continuously until the
shutter button is released. The shooting
capacity depends on the memory.
- [AEB] : Take three pictures in a series in different
exposures: short exposure (-0.5EV),
standard exposure (0.0EV) and over
exposure (+0.5EV). Use the mode if it is
hard to decide exposure of the object.
ſ High resolution and picture quality increases file saving time, which increases stand-by
time.
ſ If the [CONTINOUS] sub menu is selected, the flash will be off automatically.
ſ If less than 3 pictures are available in the memory, the AEB shooting is not available.
ſ It is best to use a tripod for the AEB shooting as the time to save each image file is longer
and the blurring caused by camera shake may occur.
Metering
[ PROGRAM mode ]
ƈ If you cannot obtain suitable exposure conditions, you can change the metering method to
take brighter pictures.
[MULTI] ( ) : Exposure will be calculated based on an
average of the available light in the image
area. However, the calculation will be
biased towards the centre of the image
area. This is suitable for general use.
[SPOT] ( ) : Only the rectangular area in the centre
of the LCD monitor will be metered for
light. This is suitable when the subject in
the centre is exposed correctly, regardless of the back lighting.
ƃ The default metering mode is Multi pattern metering.
ƃ If the subject is not the centre of the focus area, do not use the spot metering as this may
result in an exposure error. In this circumstance, It is better to use exposure compensation.
INFORMATION
Continuous Shooting
[PROGRAM mode]
MULTI
SPOT
METERING
SINGLE
CONTINUOUS
AEB
SHOOTING
ŝ56Ş
Starting play mode
ƈIf the memory card is inserted in the camera, all the camera functions apply only to the
memory card.
ƈIf the memory card is not inserted in the camera, all the camera functions apply only to the
internal memory.
ƈIf you have turned on the camera by pressing the POWER button, you can press the PLAY
MODE button once to switch to Play mode and press it again to switch to Recording mode.
ƈYou can turn the power on with the play mode button. The camera is turned on in play mode.
Press the play mode button again to switch to shooting mode.
ƈYou can set up the PLAY mode function by using the camera buttons and LCD monitor.
3. Select an image that you want to play back by
pressing the LEFT/ RIGHT button.
ſ Press and hold the Left or Right button to fast
forward the images played.
2. The last image stored on the memory is
displayed on the LCD monitor.
ƃPlaying back a still image
1. Select the PLAY mode by pressing the play
mode button ( ).
ƃManner mode : Pressing the play mode button for more than 3 seconds changes the
buzzer and start-up sound setting to OFF, even though you may have set these to ON.
ƃLightly press the shutter button in Play mode to switch to the currently set shooting mode.
INFORMATION
ŝ58Ş
Starting play mode
ƈOn camera movie trimming : You can extract desired frames of movie clip during the movie
clip play back.
ƃIf the running time is under 10 seconds, the movie clip can’t be
trimmed.
1. Select a desired movie clip in the play mode.
2. Play back the movie clip by pressing the Play & Pause
button.
3. Press the Pause button at the point of the movie clip that
you want to start extracting.
4. Press the OK button.
5. Press the Play & Pause button and the extracted range will
be displayed on the status bar.
6. Press the Play & Pause button once more at the point
where you wish the extracted file to stop.
7. Press the OK button and a confirmation window will
display.
8. Select a desired sub menu by pressing the Up/ Down
botton and press the OK button.
[TRIM] : the extracted file will be saved.
[CANCEL] : cancels the extracting movie clip
ƃIf the time line bar passes by the start point by pressing the REW(Left) button, the first
frame of the movie clip will display.
ƃIf you doesn’t specify the ending point of the movie clip, the trimming confirmation window
will display at the point of the last frame.
INFORMATION
TRIM:OK
MARK IN:OK CAPTURE:E
TRIMMING?
TRIM
CANCEL
CONFIRM:OK
ŝ59Ş
Starting play mode
ƃPlaying back a recorded voice
Steps from 1-2 are the same as those to play back a still
image.
3. Select the recorded voice that you want to play back by
using the LEFT/ RIGHT button. If you select a recorded
voice file, the voice indicator ( ) will be displayed on
the LCD monitor.
4. Press the play & pause button ( ) to play back a
recorded voice file.
- To pause a recorded voice file, while playing it back, press the play & pause button again.
- To resume playback of the voice file, press the play & pause button.
- To rewind the voice file while it is playing, press the LEFT button.
To fast forward the voice file, press the RIGHT button.
- To stop playback of the voice file, press the play & pause button, and then press the
LEFT or RIGHT button.
ŝ60Ş
LCD monitor indicator
ƈThe LCD monitor displays shooting information about the displayed image.
No. Description Icon Page
1 Play mode -
2 Battery p.14
3 File Type -
4 Voice memo p.62
5 Protect indicator p.74
6 DPOF indicator p.75
7
Folder name and Stored image number
100-0009 -
ڿ
ں
ڹ
ڻ
ڼ
ڽ
ھ
ƈBy pressing the Play mode button for over 1 Sec., you can check the recording information.
Size : 2592X1944 Size
Av : F2.8 Aperture value
Tv : 1/60 Shutter speed
ISO : 100 ISO sensitivity
Flash : Off
Whether or not
the flash is used
Date : 2005/07/01
Recording date
[Play mode display]
[Recording information]
Pressing for over 1 Sec.
Pressing the Play mode button
Size : 2592X1944
Av : F2.8
Tv : 1/60
ISO : 100
Flash : Off
Date : 2005/07/01
ŝ61Ş
Using the camera buttons to adjust the camera
ƈIn Play mode, you can use the buttons on the camera to conveniently set up the Play mode
functions.
ƃImage enlargement
1. Select an image that you want to enlarge and press the enlargement button.
2. Different parts of the image can be viewed by pressing
the 5 function button.
3. Pressing the thumbnail button will zoom back to the
original full sized image.
- You can tell whether the image displayed is an
enlarged view by checking the image enlargement
indicator shown at the bottom left of the LCD monitor.
(If the image is not an enlarged view, the indicator will
not be displayed.) You can also check the area of
enlargement.
- Movie clips and WAV files can’t be enlarged.
- If an image is enlarged, a loss of quality may occur.
Thumbnail( )/ Enlargement( ) button
[ Normal display mode ] [ Thumbnail display mode ]
Pressing the thumbnail
button( )
Pressing the enlargement
button( )
Highlighted image
ƃYou can view multiple pictures, enlarge a selected picture, and crop and save a selected area
of an image.
ƃThumbnail display
1. While an image is displayed full screen, press the
thumbnail button.
2. The thumbnail display will highlight the image that had
been showing at the time the thumbnail mode was
selected.
3. Press the 5 function button to move to a desired image.
4. To view an image separately, press the enlargement button.
ŝ62Ş
Thumbnail( )/ Enlargement( ) button
ƃThe maximum enlargement rate in proportion to the image size.
ƃTrimming : You can extract part of the image that you want
and save it separately.
1. Select an image that you want to enlarge and press the
enlargement button.
2. Different parts of the image can be viewed by pressing
the 5 function button.
3. Press the MENU button and a message will be
displayed as shown alongside.
4. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button.
[TRIM] : The trimmed image will save as a new file name, and display on the LCD
monitor.
[CANCEL]: The trimming menu will disappear.
ſ If there is little memory space to save the trimmed image, the image can’t be trimmed.
ſ To delete the enlarged image during the trimming function, press the delete button.
Image size 2592 2272 2048 1600 1024 640
Maximum enlargement rate
X8.0 X7.1 X6.4 X5.0 X3.2 X2.0
Voice ( ) memo/ Up button
ƈWhen the menu is displayed on the LCD monitor, pressing the UP button makes the menu
cursor move up.
ƈWhen the menu is not displayed on the LCD monitor, the UP button operates as the voice
memo button. You can add your voice to a stored still image.
ƃAdding a Voice Memo to a Still Image
1. Press the LEFT/ RIGHT button to select an image that
you wish to add sound to.
2. Press the voice memo button ( ) and the voice memo
indicator will display. The camera is now ready to record
a voice memo.
START: SHUTTER
TRIMMING?
TRIM
CANCEL
CONFIRM:OK
ŝ63Ş
Voice ( ) memo/ Up button
3. Press the shutter button to start recording and voice will
be recorded to the still image for 10 seconds.
While the voice is recording, the recording status
window will be displayed as shown alongside.
4. The recording can be stopped by pressing the shutter
button again.
5. The ( ) icon will be displayed on the LCD monitor
after voice memo recording has finished.
- Voice memos can’t be recorded onto movie clip files.
- A distance of 40cm between you and the camera
(microphone) is the best distance to record sound.
- The voice memo will be saved in ҭ.wav format, but
has the same file name as the still image to which it
corresponds.
- If you add a new voice memo to the still image that
already has a voice memo, the existing voice memo will be erased.
Play & Pause ( )/ Down button
ƈIn Play mode, the play & pause/ down button works as follows:
- If the menu is displayed
Press the DOWN button to move from the main menu to a sub menu, or to move down the
sub menu cursor.
- If a still image with a voice memo, a voice file, or a movie clip is playing
In Stop mode : Plays a still image with a voice memo, a voice file, or a movie clip.
During playback : Temporarily stops playback.
In Pause mode : Resumes playback
[Voice recording is stopped] [Voice recording is paused][Voice recording is playing]
STOP:SHUTTER
REC
ŝ64Ş
Delete ( ) button
ƈ This deletes images stored on the memory card.
ƃBefore deleting images from the camera, you should protect or download images to your
computer that you wish to keep.
INFORMATION
ƃDeleting Images in Thumbnail Display Mode
1. Use the UP, DOWN, LEFT, and RIGHT buttons to select the image you want to delete,
and then press the DELETE ( ) button.
2. The following message will be displayed on the LCD monitor.
3. Select the submenu values by pressing the UP/DOWN button and then press the OK
button.
If [DELETE] is selected : deletes the selected images.
If [CANCEL] is selected : cancels "Delete Image".
ƃDeleting Images in Play Mode
1. Select an image that you want to delete by pressing the
LEFT/ RIGHT button and press the DELETE( )
button.
2. A message will display as shown alongside on the LCD
monitor.
3. Select the submenu values by pressing the UP/ DOWN
button and then press the OK button.
If [DELETE] is selected
: deletes the selected images.
If [CANCEL] is selected
: cancels "Delete Image".
Press the
DELETE button.
DELETE ?
DELETE
CANCEL
CONFIRM:OK
DELETE ?
DELETE
CANCEL
CONFIRM:OK
ŝ65Ş
Left/ Right/ Menu/ OK button
ƈLEFT/ RIGHT/ MENU/ OK buttons activate the following.
- LEFT button : While the menu is showing, press the LEFT button to select the menu tab
to the left of the cursor.
- RIGHT button : While the menu is showing, press the RIGHT button to select the menu
tab to the right of the cursor, or to move an secondary menu.
- MENU button : When you press the MENU button, the play mode menu will be displayed
on the LCD monitor. Pressing it again will return the LCD to the initial
display.
- OK button : When the menu is displayed on the LCD monitor, the OK button is used
for confirming data that is changed by using the 5 function button.
ŝ66Ş
Album button
ƈYou can organise the captured still images into albums by
using the Album button.
ƈThis camera has 8 albums and each album can take up to
100 images.
ƈThe album menu loading time depends on the memory card
type.
ƈHow to use the album
ƃSelecting the album
1. In the play mode, press the Album button.
2. Select the [ALBUM] menu by pressing the Left/ Right
button.
3. Select a desired album by pressing the Up/Down button.
ƃInserting still images into the album
1. Select (A) album.
2. Press the OK button and a window for inserting images
will display.
3. Up/ Down button: select an album for inserting images
Left/ Right button: select images
OK:SELECT
OK:SELECT DEL:EMPTY ALBUM
CONFIRM:OK E:EXIT
PREV ALBUM1 NEXT

 
ŝ67Ş
Album button
4. Press the OK button and a confirmation window for
inserting an image will display. Select a desired sub
menu by Pressing the Up/Down button and press the OK
button.
[YES] : inserts an image into the selected album.
[NO] : cancels the inserting image.
ƃRemoving still images from the album
1. Select an album.
2. Press the delete button and a confirmation window will
display.
3. Select a desired sub menu by pressing the Up/ Down
button and press the OK button.
[YES] : Removes all images in the album
[NO] : Cancels the removing images
ƃRemoving selected image
1. Select an album.
2. Press the OK button and a window for removing images
will display.
Left/ Right button: select images
Delete button : A confirmation window will display.
Select a desired sub menu by pressing
the Up/Down button and press the OK
button.
[YES] : the selected image will be removed
[NO] : Cancels the removing image
ƃIf an image is deleted from the memory, the image doesn’t display on an album.
ƃAn image can be added into the different albums.
INFORMATION
CONFIRM:OK E:EXIT
PREV ALBUM1 NEXT

 
RELOCATE
YES
NO
CONFIRM:OK
OK:SELECT DEL:EMPTY ALBUM
EMPTY ALBUM?
YES
NO
CONFIRM:OK
CONFIRM:OK E:EXIT
PREV ALBUM1 NEXT

 
CONFIRM:OK E:EXIT
PREV ALBUM 1 NEXT

 
REMOVE
YES
NO
CONFIRM:OK
ŝ68Ş
Album button
ƃPlaying back the albums
Ƅ Playing back all of the albums
1. Select (A) album.
2. Select [SHOW] menu by pressing the Left/Right button.
3. Select a desired sub menu by pressing the Up/Down
button. Press the OK button and the slide show will start.
( ) : The slide show is closed after one cycle.
( ) : The slide show is repeated until the OK button is
pressed.
73"84)A
Ƅ Playing a desired album
1. Select a desired album.
2. Select [SHOW] menu by pressing the Left/ Right button.
3. Select a desired sub menu by pressing the Up/ Down button.
Press the OK button and the slide show will start.
( ) : The slide show is closed after one cycle.
( ) : The slide show is repeated until the OK button is pressed.
ƃSetting play interval: Set the slide show play interval.
1. Select a desired album.
2.
Select [INTERVAL] menu by pressing the Left/ Right button.
3. Select a desired sub menu by pressing the Up/ Down
button.
ƃConfigure slide show effects
: Unique screen effects can be used for the slide show.
1. Select a desired album.
2. Select [EFFECT] menu by pressing the Left/ Right button.
3. Select a desired sub menu by pressing the Up/ Down
button.
( ) : Normal display.
( ) :
The image slides diagonally from top left to bottom right.
( ) : Image moves from the top left.
( ) : Image is displayed slowly from the centre outwards.
( ) : NO, E1, E2 and E3 effects are applied in order.
ŝ69Ş
Setting up the play back function using the LCD monitor
ƈPLAY mode functions can be changed by using the LCD monitor. In the PLAY mode,
pressing the MENU button displays the menu on the LCD monitor. The menus you can set
up in Play mode are as follows. To capture an image after setting up the play menu, press the
PLAY button.
Menu tab Main menu Sub menu Secondary menu Page
-
-
-
-
-
-
-
-
-
-
-
-
-
-
ROTATE
p. 72
RIGHT90Ŋ
LEFT90Ŋ
180Ŋ
HORIZONTAL
VERTICAL
DELETE ALL
p. 75
NO
YES
COPY TO CARD
p. 78
NO
YES
DPOF
STANDARD
INDEX
PRINT SIZE
CANCEL
ONE PIC/ALL PICS
NO/ YES
DEFAULT/3X5/4X6/5X7/8X10
STANDARD/INDEX/PRINT SIZE
p. 75
~ p. 77
PROTECT p. 74
SELECT
ALL
UNLOCK/LOCK
UNLOCK/LOCK
RESIZE
p. 73
2272X1704
2048X1536
1600X1200
1024X768
640X480
USER IMAGE 1, 2
ŝ70Ş
TYPE
Setting up the play back function using the LCD monitor
Menu tab Main menu Sub menu Secondary menu Page
-
-
-
-
AUTO
POSTCARD
CARD
LETTER
4X6
L
2L
A4
A3
AUTO
FULL
1
2
4
8
9
16
AUTO
PLAIN
PHOTO
FAST PHO.
AUTO SET
CUSTOM SET
IMAGES
p. 81
p. 81
p. 80
NO
YES
SIZE
LAYOUT
ONE PIC
ALL PICS
ƈThis menu is available while the camera is connected to a PictBridge supporting printer (direct
connection to the camera, sold separately) with a USB cable.
ŝ72Ş
Rotating an image
ƈYou can rotate the stored images by various degrees.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [ROTATE]
menu tab.
3. Select a desired sub menu by pressing the UP/ DOWN
button.
[RIGHT 90Ŋ] :
Rotate picture in a clock-wise
direction
[LEFT 90Ŋ] :
Rotate picture in a counter-
clock-wise direction
[180Ŋ] :
Rotate picture 180 degrees
4. Press the OK button. The rotated image will be saved with a new file name and the menu will
disappear. If you display the rotated image on the LCD monitor, empty spaces may appear to
the left and right of the image.
[HORIZONTAL] :
Rotate picture horizontally
[VERTICAL] :
Rotate picture vertically
ROTATE
RIGHT 90Ŋ
LEFT 90Ŋ
180Ŋ
HORIZONTAL
VERTICAL
EXIT:MENU MOVE:
Ɗ
ƌ
ŝ73Ş
Resize
ƈChange the resolution (size) of pictures taken. Select [USER IMAGE] to save an image to be
the start-up image. The resized image will have a new file name.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [RESIZE]
menu tab.
3. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
ƃA large sized image can be resized to a smaller sized image, but not vice versa.
ƃOnly JPG images can be resized. MOVIE and WAV files can’t be resized.
ƃYou can change the resolution of only those files compressed in the JPEG 4:2:2 format.
ƃThe resized image will have a new file name. The [USER IMAGE] image is stored not on
the memory card but on the internal memory.
ƃOnly two [USER IMAGE] images can be saved. If you save a new [USER IMAGE] image,
the existing startup image will be deleted in order.
ƃIf the memory capacity is insufficient to store the resized image, a [CARD FULL!]
message will display on the LCD monitor and the resized image will not be stored.
INFORMATION
5M
OOOOOO
4M
XOOOOO
3M
XXOOOO
2M
XXXO OO
1M
XXXXOO
VGA
XXXXXO
ƃImage Resize Types
Resize
4M
3M 2M 1M
VGA
USER
IMAGE
RESIZE
EXIT:MENU MOVE:
2272 X 1704
2048 X 1536
1600 X 1200
1024 X 768
640 X 480
4M
3M
2M
1M
VGA
Ɗ
ƌ
ŝ74Ş
Protecting images
ƈThis is used to protect specific shots from being accidentally erased (LOCK).
It also unprotects images that have been previously protected (UNLOCK).
ƃProtecting Images
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [PROTECT]
menu tab.
3. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[SELECT] : Only an image that is displayed on the LCD
monitor is protected or unprotected.
[ALL] : All of the stored images are protected or unprotected.
4. Select the desired secondary menu by pressing the
UP/ DOWN button and press the OK button.
[UNLOCK] : Cancels the protect function.
[LOCK] : Sets up the protect function.
- If you select the [SELECT] sub menu at step 3, you
can protect or unprotect another image by pressing the
LEFT/ RIGHT button. If you press the SHUTTER
button, the Image Protection menu will disappear.
- If you protect an image, the protect icon( ) will be
displayed on the LCD monitor.
(An unprotected image has no indicator)
- An image in LOCK mode will be protected from
[DELETE] or [DELETE ALL] functions, but will NOT be
protected from the [FORMAT] function.
PROTECT
SELECT
ALL
MOVE PIC:
SET:OK
EXIT:SH1
UNLOCK
EXIT:MENU MOVE:
Ɗ
ƌ
ŝ75Ş
Deleting all images
DPOF
ƈOf all the files stored in the memory card, the unprotected files in the DCIM subfolder will be
deleted. Remember that this will permanently delete unprotected images. Important shots
should be stored on a computer before deletion takes place. The startup image is stored in
the camera's internal memory (i.e., not on the memory card) and it will not be deleted even if
you delete all files on the memory card.
ƃDeleting all images
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the
[DELETE ALL] menu tab.
3. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
Selecting [NO] : cancels “Delete All”
Selecting [YES] : Displays the dialogue box to confirm the
delete.
- If [DELETE] is selected : press the OK button and all unprotected pictures are deleted.
- If [CANCEL] is selected : press the OK button and images are not deleted.
ƈDPOF(Digital Print Order Format) allows you to embed printing information on your memory
card’s MISC folder. Select the pictures to be printed and how many prints to make.
ƈThe DPOF indicator will display on the LCD monitor when an image that has DPOF
information plays back. Images can then be printed on DPOF printers, or at an increasing
number of photo labs.
ƈThis function is not available for Movie clips and Voice recording files.
DELETE ALL
NO
YES
EXIT:MENU MOVE:
Ɗ
ƌ
ŝ76Ş
DPOF : STANDARD
DPOF : INDEX
ƈThis function allows you to embed print quantity information on a stored image.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [DPOF]
menu tab.
3. Select the [STANDARD] menu by pressing the
UP/ DOWN button and press the RIGHT button.
4. Use the UP and DOWN buttons to select [ONE PIC] or
[ALL PICS], and then press the OK button. A window for
selecting number of copies will display.
[ONE PIC] : Set the number of copies to print for the
current picture only.
[ALL PICS] : Set the number of copies to print for each
picture, excluding movie clips and voice
recordings.
5. Use the UP and DOWN buttons to select the number of
copies and then press the OK button.
- The DPOF icon ( ) will appear by the pictures for
which the number of copies to print is set.
ƈImages (except for movie clips and voice file) are printed as index type.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [DPOF]
menu tab.
3. Select the [INDEX] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button.
If [NO] is selected : The image will not be printed in index format.
If [YES] is selected : The image will be printed in index format.
5. Press the OK button to confirm the setting.
6. Press the menu button twice and the menu will disappear.
DPOF
STANDARD
INDEX
PRINT SIZE
CANCEL
ONE PIC
ALL PICS
MOVE PIC:
SET:OK
EXIT:SH1
0 PRINTS
DPOF
STANDARD
INDEX
PRINT SIZE
CANCEL
NO
YES
BACK: SET:OK
BACK: SET:OK
ŝ77Ş
DPOF : PRINT SIZE
ƈYou can specify the print size when printing images stored on the memory card.
The [PRINT SIZE] menu is available only for DPOF 1.1 compatible printers.
ƃSetting the Print Size
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [DPOF]
menu tab.
3. Select the [PRINT SIZE] menu by pressing the
UP/ DOWN button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
DPOF : CANCEL
ƈYou can cancel the [STANDARD], [INDEX], or [SIZE] settings. Cancel the setting to reset the
value to its default.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [DPOF]
menu tab.
3. Select the [CANCEL] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button.
If [STANDARD] is selected : Cancels the standard print setting.
If [INDEX] is selected : Cancels the index print setting.
If [PRINT SIZE] is selected : Cancels the print size setting.
5. Press the OK button to confirm the setting.
* PRINT SIZE : DEFAULT, 3X5, 4X6, 5X7, 8X10
* The [DEFAULT] print size varies depending on the printer manufacturer.
For your printer's default value, please refer to the user's guide that came with your printer.
DPOF
STANDARD
INDEX
PRINT SIZE
CANCEL
DEFAULT
3X5
4X6
5X7
8X10
DPOF
STANDARD
INDEX
PRINT SIZE
CANCEL
STANDARD
INDEX
PRINT SIZE
BACK: SET:OK
BACK: SET:OK
ŝ78Ş
COPY TO CARD
ƈThis enables you to copy image files to the memory card.
ƃCopying to the Memory Card
1. Press the play mode button and press the menu button.
2. Select the [COPY TO CARD] menu tab by pressing the
LEFT/ RIGHT button.
3. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
- [NO] : cancels the [COPY TO CARD] function.
- [YES] : All images saved in the internal memory are
copied to the memory card after the
[PROCESSING!] message is displayed. After copying has been completed, the
screen will return to play mode.
ƃWhen this menu is selected without inserting a memory card, you can't select the [COPY
TO CARD] sub menus.
ƃIf there is not enough space available in the memory card to copy saved images in the
internal memory (10MB), the [COPY TO CARD] command will copy only some of the
images and display [CARD FULL!] message. Then the system will return to the playback
mode. Please be sure to delete any unnecessary images to free up space before inserting
the memory card into the camera.
INFORMATION
COPY TO CARD
NO
YES
EXIT:MENU MOVE:
Ɗ
ƌ
ŝ79Ş
PictBridge
ƈYou can use the USB cable to connect this camera to a printer that supports PictBridge (sold
separately) and print the stored images directly. Movie clips and voice files cannot be printed.
You can set up the following settings from the PictBridge menu.
IMAGES : Select the pictures to be printed.
PRINTER SETUP : Setting up printing(AUTO SET/ CUSTOM SET)
PRINT : Printing pictures
DPOF AUTO PRINT : Printing the DPOF files
RESET : Initializing the PictBridge functions
ƃConnecting the Camera to a Printer
1. Press the power button to turn the camera power on.
2. Use the supplied USB cable to connect the camera to the
printer as shown below.
3. Turn on the printer to connect the camera to the printer.
4. A window for selecting an external device will display on
the LCD monitor.
5. Select [PRINTER] menu by pressing the Up/ Down button
and press the OK button.
ſ If you selected [COMPUTER] in Step 5, when you connect the camera to your printer, the
[USB ERROR!] message will display and the connection will not be established. In this case,
disconnect the USB cable, and then follow the procedure from Step 2 and onward.
USB CONNECTION
COMPUTER
PRINTER
CONFIRM:OK
ŝ80Ş
PictBridge : Picture Selection
ƈSelect pictures to print
1. Connect the camera to your printer. The USB menu must
be set to [PRINTER] after you connect the camera to the
printer.(See p.79)
2. Use the LEFT and RIGHT buttons to select the [IMAGE]
menu tab.
3. Use the UP and DOWN buttons to select the desired
submenu value, and then press the OK button.
When [ONE PIC] is selected : The PictBridge function will
be applied only to the picture currently displayed.
When [ALL PICS] is selected : The PictBridge function will be applied to all pictures,
excluding movie clips and voice files.
[ When [ONE PIC] is selected ] [ When [ALL PICS] is selected ]
- Press the Up/ Down button to select the number of prints. Maximum 30 prints.
- When you select [ONE PIC] menu, use the Left/ Right button to select another picture and
select the number of prints for another picture.
- After setting the number of prints, press the OK button to save.
- Press the Shutter button to return to the menu without setting the number of prints.
ƃSetting the Number of Copies to Print
- Select [ONE PIC] or [ALL PICS]. A screen where you can set the number of copies to print
will appear as shown below.
0 PRINTS
MOVE PIC: SET:OK
EXIT:SH1
0 PRINTS
EXIT: SH1 SET:OK
IMAGES
MOVE:
Ɗ
ƌ
ONE PIC
ALL PICS
ŝ81Ş
PictBridge : Print Setting
Menu
SIZE
Setting the size of the printing paper
AUTO, POSTCARD, CARD, LETTER, 4 X 6, L, 2L, A4, A3
LAYOUT
Setting the number of pictures to be printed on a sheet of paper
AUTO, FULL, 1, 2, 4, 8, 9, 16
TYPE
Setting the quality of the printing paper AUTO, PLAIN, PHOTO, FASTPHO.
QUALITY
Setting the quality of the picture to be printed
AUTO, DRAFT, NORMAL, FINE
DATE
Setting whether to print the date
AUTO, OFF, ON
FILE NAME
Setting whether to print the file name
AUTO, OFF, ON
ƈAUTO SET
1. Connect the camera to your printer. The USB menu must
be set to [PRINTER] after you connect the camera to the
printer.(See p.79)
2. Use the LEFT and RIGHT buttons to select the
[AUTO SET] menu tab.
3. Use the UP and DOWN buttons to select the desired
submenu value, and then press the OK button.
[NO] : [CUSTOM SET] values are kept.
[YES]: All values in the [CUSTOM SET] are automatically changed.
ſ Some menu options are not supported in all manufacturer and printer models.
ſ If the setting values are not changed in the automatic/manual setting, the setting values are
automatically kept.
1. Connect the camera to your printer. The USB menu must
be set to [PRINTER] after you connect the camera to the
printer.(See p.79)
2. Use the LEFT and RIGHT buttons to select the
[CUSTOM SET] menu tab.
3. Use the UP and DOWN buttons to select the desired
submenu value, and then press the RIGHT button.
4. Use the UP and DOWN buttons to select the desired submenu value, and then press the
OK button.
ƈCUSTOM SET : You can select the Paper Size, Print Format, Paper Type, Print Quality,
Date Print, and File Name Print menus for printed pictures.
Function Sub menu
AUTO SET
MOVE:
Ɗ
ƌ
NO
YES
SIZE
LAYOUT
TYPE
QUALITY
DATE
AUTO
AUTO
AUTO
AUTO
AUTO
CUSTOM SET
MOVE:
Ɗ
ƌ
ƈThe menus you can set up are as follows:
ŝ82Ş
PictBridge : Printing
ƈPrinting Pictures
1. Connect the camera to your printer.
The USB menu must be set to [PRINTER] after you
connect the camera to the printer.(See p.79)
2. Use the LEFT and RIGHT buttons to select the [PRINT]
menu tab.
3. Use the UP and DOWN buttons to select the desired
submenu value, and then press the OK button.
[STANDARD] : Print the pictures stored in the memory card in set numbers.
One picture is printed on one piece of paper.
[INDEX] : Print multiple images on one sheet of paper.
1. Connect the camera to your printer. The USB menu
must be set to [PRINTER] after you connect the camera
to the printer.(See p.79)
2. Use the LEFT and RIGHT buttons to select the [DPOF
PRINT] menu tab.
3. Use the UP and DOWN buttons to select the desired
submenu value, and then press the OK button.
[NO] : Cancel the printing
[YES]: Directly print the file with the DPOF information
ſ Depending on the manufacturer and printer model, some menus may not be available.
With a printer without supporting the DPOF, the menu is still displayed but not available.
4. The screen shown on the right will appear and the
picture will be printed. If no picture is selected, the
[NO IMAGE!] message will be displayed. Press the
shutter button while printing to cancel the printing and
the [IMAGES] menu is displayed.
ſ Number of pictures in a index print varies depends on
the printer used.
ƈDPOF PRINT : This allows you to directly print the files with DPOF information.
NOW PRINTING
EXIT:SH1
001/0010
PRINT
MOVE:
Ɗ
ƌ
STANDARD
INDEX
DPOF PRINT
MOVE:
Ɗ
ƌ
NO
YES
ŝ83Ş
PictBridge : RESET
ƈInitialises user-changed configurations.
1. Connect the camera to your printer.
The USB menu must be set to [PRINTER] after you
connect the camera to the printer.(See p.79)
2. Use the LEFT and RIGHT buttons to select the [RESET]
menu tab.
3. Use the UP and DOWN buttons to select the desired
submenu value, and then press the OK button.
- If [NO] is selected : Settings will not be reset.
- If [YES] is selected : All print and image settings will be reset.
ſ Default print setting varies depending on the printer manufacturer.
For your printer’s default setting, refer to the user’s guide that came with your printer.
RESET
MOVE:
Ɗ
ƌ
NO
YES
ŝ84Ş
Setup menu
Menu tab Main menu Sub menu Secondary menu Page
SERIES -
RESET -
PWR SAVE OFF, 1, 3, 5MIN - p.86
ENGLISH ጥૹ࿴ FRANÇAIS
DEUTSCH ESPAÑOL ITALIANO
P”CCK»…
LANGUAGE
PORTUGUÊS
DUTCH DANSK
p.87
SVENSKA SUOMI
BAHASA
POLSKI Magyar
NO -
YES -
05/07/01 13:00 OFF
YYYY/MM/DD -
DD/MM/YYYY -
MM/DD/YYYY -
OFF -
IMPRINT DATE - p.88
DATE&TIME -
OFF -
ON -
OFF -
LOW -
MEDIUM -
HIGH -
FILE
FORMAT
DATE&TIME
SOUND
p.85
p.87
p.89
p.88
AF LAMP
p.89
ƈIn this mode, you can set up basic settings. You can use the setup menu in all camera
modes, except Voice Recording mode.
The items indicated by are default settings.
ŝ85Ş
Setup menu
ſ Menus are subject to change without prior notice.
Menu tab Main menu Sub menu Secondary menu Page
DARK -
LCD NORMAL - p.90
BRIGHT -
Q.VIEW OFF, 0.5, 1, 3SEC - p.90
NO -
YES -
RESET
p.91
ƈ This function allows the user to select the file naming format.
ƃ Assigning File Names
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [FILE] menu by pressing the UP/ DOWN button
and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[SERIES] : New files are named using numbers that follow the previous sequence, even
when a new memory card is used, or after formatting, or after deleting all
pictures.
[RESET] : After using the reset function, the next file name will be set from 0001 even
after formatting, deleting all or inserting a new memory card.
5. Press the menu button twice and the menu will disappear.
File name
FILE
PWR SAVE
LANGUAGE
FORMAT
DATE&TIME
SETUP
BACK : SET:OK
SERIES
RESET
ŝ86Ş
File name
ƃThe first stored folder name is 100SSCAM, and the first file name is SSA50001.
ƃ File names are assigned sequentially from SSA50001 ƍ SSA50002 ƍ ~ ƍ SSA59999.
ƃThe folder number is assigned sequentially from 100 to 999 as follows:
100SSCAM ƍ 101SSCAM ƍ ~ ƍ 999SSCAM.
ƃThe files used with the memory card conform to the DCF(Design rule for Camera File
systems) format.
INFORMATION
ƃEven if the battery is removed and inserted again, the power off setting will be preserved.
ƃNote that the automatic power off function will not operate if the camera is in PC mode,
slide show, playing back a voice recording, playing back a movie clip and the
[COMPOSITE] shooting.
INFORMATION
Auto power off
ƃSetting Power Off
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [PWR SAVE] menu by pressing the
UP/ DOWN button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[OFF] : The power off function will not operate.
[1, 3, 5 MIN] : The power will turn off automatically if not used for the period of time
specified.
5. Press the menu button twice and the menu will disappear.
ƈ This function switches the camera off after a set amount of time in order to prevent
unnecessary battery drainage.
FILE
PWR SAVE
LANGUAGE
FORMAT
DATE&TIME
OFF
1 MIN
3 MIN
5 MIN
SETUP
BACK: SET:OK
ŝ87Ş
Language
ƃSetting Language
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [LANGUAGE] menu by pressing the
UP/ DOWN button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
LANGUAGE sub menu : English, Korean, French, German, Spanish, Italian, S.Chinese,
T.Chinese, Russian, Portuguese, Dutch, Danish, Swedish, Finnish, Thai,
BAHASA(MALAY/ INDONESIAN), Arabic, Hungarian, Czech and Polish.
5. Press the menu button twice and the menu will disappear.
ƃFormatting a Memory Card
1. In any mode other than Voice Recording mode, press the
MENU button.
2.
Press the LEFT/ RIGHT button and select the [SETUP] menu tab.
3. Select the [FORMAT] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
If [NO] is selected : The memory card will not be formatted.
Press the menu button twice and the menu display will disappear.
If [YES] is selected : A confirmation window will display. Select the [FORMAT] message
and press the OK button. A [PROCESSING!] message appears and
the memory card will be formatted. If you ran FORMAT in Play mode,
a [NO IMAGE!] message will appear.
ƈThere is a choice of languages that can be displayed on the LCD monitor. Even if the battery
is removed and inserted again, the language setting will be preserved.
Formatting a memory card
ƈThis is used for formatting the memory card. If you run [FORMAT] on the memory card, all
images, including the protected images, will be deleted. Be sure to download important
images to your PC before formatting the memory card.
FILE
PWR SAVE
LANGUAGE
FORMAT
D&TIME
ENGLISH
ጥૹ࿴
FRANÇAIS
DEUTSCH
ESPAÑOL
SETUP
BACK: SET:OK
PWR SAVE
LANGUAGE
FORMAT
DATE&TIME
IMPRINT
NO
YES
SETUP
BACK: SET:OK
ƃBe sure to run [FORMAT] on the following types of memory card.
- A new memory card, or an unformatted memory card.
- A memory card that has a file this camera can't recognise or one that has been taken
from another camera.
ƃ
Always format the memory card using this camera. If you insert a memory card that has been formatted
using other cameras, memory card readers, or PCs, you will get a [CARD ERROR!] message.
INFORMATION
ŝ89Ş
Auto Focus lamp
ƈIf you set the operation sound to ON, various sounds will be activated for camera startup,
when button are pressed, and if there is a card error, so that you can be aware of the camera
operation status.
ƃSetting Operation Sounds
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [SOUND] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[SOUND] sub menu : OFF/ LOW/ MEDIUM/ HIGH
5. Press the menu button twice and the menu will disappear.
Sound
ƃHow to set up the lamp
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [AF LAMP] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
If [OFF] is selected : The AF lamp will not light up.
If [ON] is selected : The AF lamp will light up.
ſ If you select [OFF] menu and take an image in poorly lit conditions or select the [NIGHT]
scene mode, the camera may not take exact focus.
ſ The Auto Focus lamp will function while using the self-timer even if the configuration is set
to off.
ƈYou can turn on and off the Auto Focus lamp
DATE&TIME
IMPRINT
AF LAMP
SOUND
LCD
OFF
ON
SETUP
BACK: SET:OK
IMPRINT
AF LAMP
SOUND
LCD
VIDEO
OFF
LOW
MEDIUM
HIGH
SETUP
BACK: SET:OK
ŝ90Ş
LCD brightness
ƃAdjusting LCD Brightness
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [LCD] menu by pressing the UP/ DOWN button
and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[LCD] sub menu : DARK, NORMAL, BRIGHT
5. Press the menu button twice and the menu will disappear.
ƈYou can adjust the LCD brightness.
AF LAMP
SOUND
LCD
VIDEO
Q.VIEW
DARK
NORMAL
BRIGHT
SETUP
BACK: SET:OK
ƈIf you enable Quick View before capturing an image, you can view the image you just
captured on the LCD monitor for the duration set in the [Quick View] setup. Quick view is
possible only with still images.
ƃSetting Quick View
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [Q.VIEW] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[OFF] : The quick view function can’t be activated.
[0.5, 1, 3SEC] : The captured image is briefly displayed during the selected time.
5. Press the menu button twice and the menu will disappear.
SOUND
LCD
VIDEO
Q.VIEW
RESET
OFF
0.5 SEC
1 SEC
3 SEC
SETUP
BACK: SET:OK
Quick view
ŝ91Ş
Initialisation
ƈAll camera menu and function settings will be restored to their default values.
However, values for DATE/ TIME, LANGUAGE will not be changed.
ƃInitialising the Camera
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [RESET] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
If [NO] is selected : Settings will not be restored to their defaults.
If [YES] is selected
: A confirmation window will display. Select the [YES] menu and press
the OK button. Then all settings will be restored to their defaults.
SOUND
LCD
VIDEO
Q.VIEW
RESET
NO
YES
SETUP
BACK: SET:OK
ŝ92Ş
Setting up the MYCAM menu
ƈYou can set up a start up image, start up sound and shutter sound. Every camera working
mode (with the exception of Voice recording mode) has the MyCAM menu.
The items indicated by are default settings.
Menu tab Main menu Sub menu Page
OFF LOGO
USER IMAGE 1 USER IMAGE 2
OFF SH.SOUND 1
SH.SOUND 2 SH.SOUND 3
OFF SOUND 1
SOUND 2 SOUND 3
S.IMAGE
S.SOUND
SH.SOUND
p.92
p.93
p.93
ƈYou can select the image that is first displayed on the LCD monitor whenever the camera is
turned on.
ƃSetting a Startup Image
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [MYCAM]
menu tab.
3. Select the [S.IMAGE] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
5. Press the menu button twice and the menu will disappear.
Start up image
ƃUse a saved image for the start-up image with the [USER IMAGE] in the [RESIZE] menu
in the play mode.
ƃThe start-up image will not be deleted by deleting all images or [FORMAT] menu.
ƃThe start-up images are deleted by doing the [RESET] menu.
INFORMATION
* Menus are subject to change without prior notice.
S.IMAGE
SH.SOUND
S.SOUND
OFF
SH.SOUND1
OFF
MYCAM
MOVE: CHANGE:
Ɗ
ƌ
ŝ93Ş
Shutter sound
ƈYou can select the shutter sound.
ƃSelecting the Shutter Sound
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [MYCAM]
menu tab.
3. Select the [SH.SOUND] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
5. Press the menu button twice and the menu will disappear.
Start up sound
ƈYou can select the sound that is activated whenever the camera is turned on.
ƃSetting the Startup Sound
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [MYCAM]
menu tab.
3. Select the [S.SOUND] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
5. Press the menu button twice and the menu will disappear.
S.IMAGE
SH.SOUND
S.SOUND
OFF
SOUND1
SOUND2
SOUND3
MYCAM
S.IMAGE
SH.SOUND
S.SOUND
OFF
SH.SOUND1
SH.SOUND2
SH.SOUND3
MYCAM
BACK: SET:OK
BACK: SET:OK
ŝ94Ş
Important notes
Be sure to observe the following precautions!
ƈThis unit contains precision electronic components. Do not use or store this unit in the
following locations.
- Areas exposed to severe changes in temperature and humidity.
- Areas exposed to dust and dirt.
- Areas exposed to direct sunlight or the inside of a vehicle in hot weather.
- Environments where there is high magnetism or excessive vibration.
- Areas with high explosives or highly flammable materials.
ƈDo not leave this camera in places subject to dust, chemicals (like naphthalene and mothball),
high temperature and high humidity.
Keep this camera with silica gel in a hermetically sealed box when not planning to use the
camera for a long period of time
ƈSand can be particularly troublesome to cameras.
- Do not let sand get inside the unit when using it on beaches, coastal dunes, or other areas
where there is lots of sand.
- Doing so may result in failure or may permanently render the unit unusable.
ƈHandling the camera
- Never drop the camera or subject it to severe shocks or vibrations.
- Prevent the large size LCD monitor from an impact. When this camera is not used, keep
this camera in the camera case.
- Avoid obstructing the lens or the flash when you capture an image.
- This camera is not waterproof.
To avoid dangerous electrical shocks, never hold or operate the camera with wet hands.
- If you use this camera in wet places, such as beach or pool, do not let water or sand get
inside the camera. Doing so may result in failure or may permanently damage the unit.
ƈExtremes in temperature may cause problems.
- If the camera is transferred from a cold to a warm and humid environment, condensation
can form on the delicate electronic circuitry. If this occurs, turn the camera off and wait for at
least 1 hour until all moisture is dispersed. Moisture build up can also occur in the memory
card. If this happens, turn off the camera and remove the memory card. Wait until the
moisture has dispersed.
ŝ95Ş
Important notes
ƈCaution on Using the Lens
- If the lens is subjected to direct sunlight, it could result in discoloration and deterioration of
the image sensor.
- Pay attention not to get fingerprints or foreign substances on the surface of the lens.
ƈIf the digital camera is not used for a long period, an electric discharge can occur.
It is a good idea to remove the battery and the memory card if you do not intend using the
camera for an extended period of time.
ƈIf the camera is exposed to an electronic interference, it will turn itself off to protect the
memory card.
ƈCamera Maintenance
- Use a soft brush (available from photo stores) to gently clean the lens and LCD assemblies.
If this does not work, lens-cleaning paper with lens cleaning fluid can be used.
Clean the camera body with a soft cloth. Do not allow this camera to come into contact with
solvent materials such as benzol, insecticide, thinners etc. This may damage the body shell
of the camera and also affect its performance. Rough handling can damage the LCD
monitor. Take care to avoid damage and keep the camera in its protective carry case at all
times when not in use.
ƈDo not attempt to disassemble or modify the camera.
ƈUnder certain conditions, static electricity can cause the flash unit to fire. This is not harmful to
the camera and is not a malfunction.
ƈBefore an important event or going on a trip, you should check the camera condition.
- Take a picture for testing the camera condition and prepare extra battery.
- Samsung cannot be held responsible for camera malfunctions.
ŝ96Ş
Warning indicator
ƈThere are several warnings that may appear on the LCD display
CARD ERROR!
ϛMemory card error
ƍ Turn off the camera power and turn it on again
ƍ Insert the memory card again
ƍ Insert the memory card and format the memory card (p.87)
MEMORY ERROR!
ϛInternal memory error
ƍ Turn off the camera power and turn it on again
ƍ Format the memory with the memory card removed. (p.87)
CARD LOCKED!
ϛThe memory card is locked
ƍ SD memory card : Slide the write protect switch to the top of the memory card
CARD FULL!/ MEMORY FULL!
ϛThere is insufficient memory capacity to take an image
ƍ Insert a new memory card
ƍ Delete unnecessary image files to free up some memory
NO IMAGE!
ϛThere are no images stored on the memory
ƍ Take images
ƍ Insert a memory card that is holding some images
FILE ERROR!
ϛFile error
ƍ Format the memory card
ϛMemory card error
ƍ Contact a camera service centre
LOW BATTERY!
ϛThere is low battery capacity
ƍ Insert fresh batteries.
ŝ97Ş
Warning indicator
ƈPlease check the following
Before contacting a service centre
LOW LIGHT!
ϛWhen taking pictures in dark places
ƍ Take pictures in Flash Photography mode.
OUT OF NUMBER
ϛWhen selecting too many printing pages in the PictBridge menu.
ƍ Select printing page within the limitation.
The camera doesn’t switch on
ϛThere is low battery capacity
ƍ Insert fresh batteries(p.14)
ϛBattery are inserted incorrectly with the polarities reversed
ƍ Insert the battery according to the polarity marks (+, -)
The camera power ceases while in use
ϛThe battery are exhausted
ƍ Insert fresh batteries.
ϛThe Camera is turned off automatically
ƍ Turn on the camera power again.
Battery drain quickly
ϛThe Camera is being used in low temperatures
ƍ Keep the camera in warm conditions (i.e. inside a coat or jacket) and only remove it in
order to take images
ŝ98Ş
Before contacting a service centre
Camera does not take images when pressing the Shutter button
ϛThere is insufficient memory capacity
ƍ Delete unnecessary image files
ϛThe memory card has not been formatted
ƍ Format the memory card (p.87)
ϛThe memory card is exhausted
ƍ Insert a new memory card
ϛThe memory card is locked
ƍ Refer to [CARD LOCKED!] error message (p.97)
ϛThe camera’s power is off
ƍ Turn the camera power on
ϛThe battery are exhausted
ƍ Insert fresh batteries.
ϛBattery is inserted incorrectly with the polarities reversed
ƍ Insert the battery according to the polarity marks (+, -)
The camera suddenly stops working while in use
ϛThe camera was stopped due to a malfunction
ƍ Remove /re-insert battery and switch the camera on
The images are unclear
ϛA picture was taken within 0.8m from the subject without setting an appropriate macro mode
ƍ If the subject is closer than 0.8m, select macro shot mode
ϛThe picture was taken with the subject beyond the flash range
ƍ Take a picture within the flash range
ϛThe lens is smudged or dirty
ƍ Clean the lens
The flash does not fire
ϛFlash off mode has been selected
ƍ Dis-engage flash off mode
ϛThe camera mode can’t use the flash
ƍ Refer to the FLASH instruction (p.33)
Incorrect date and time is displayed
ϛThe date and time have been set incorrectly or the camera has adopted the default settings
ƍ Reset the date and time correctly
ŝ99Ş
Before contacting a service centre
The camera buttons do not operate
ϛCamera malfunction
ƍ Remove /re-insert battery and switch the camera on
A card error has occurred while the memory card is in the camera.
ϛIncorrect memory card format
ƍ Re-format the memory card
The images don't play back
ϛIncorrect file name (Violation of DCF format)
ƍ Do not change the image file name
Colour of image is different to the original scene
ϛWhite balance setting is incorrect
ƍ Select appropriate White balance
Images are too bright
ϛExposure is excessive
ƍ Reset exposure compensation
No image on external monitor
ϛThe external monitor has not been connected properly with the camera
ƍ Check the connection cables
ϛThere are incorrect files in the memory card
ƍ Insert a memory card that has correct files
When using the PC’s explorer, the [Removable Disk] file does not show
ϛCable connection is incorrect
ƍ Check the connection
ϛThe camera is off
ƍ Turn the camera on
ϛThe operating system is not Windows 98, 98SE, 2000, ME, XP/ Mac OS 9.0 ~ 10.2.
Alternatively the PC does not support USB
ƍ Install Windows 98, 98SE, 2000, ME, XP/ Mac OS 9.0 ~ 10.2 to PC that supports USB
ϛThe camera driver is not installed
ƍ Install a [USB Storage Driver]
ŝ100Ş
Specifications
Type 1/2.5" CCD
Image Sensor
Effective Pixel Approx. 5.0 Mega-pixel
Total Pixel Approx. 5.30 Mega-pixel
SHD Lens f = 5.8~17.4mm
(35mm film equivalent : 35 ~ 105mm)
Lens F No. F 2.8 ~ F 4.8
Still Image mode : 1.0X ~ 4.0X
Play mode : 1.0X ~ 8.0X (depends on image size)
LCD Monitor 2.5" color TFT LCD (200,000 pixels)
Type TTL auto focus
Normal : 80cm ~ infinity
Macro : 5cm~80cm (Wide), 50cm ~ 80cm (Tele)
Auto Macro : 5cm~Infinity
Type Mechanical and Electronic shutter
Speed 1 ~ 1/2,000 sec. (Night : 15 ~ 1/2,000 sec.)
Control Program AE Metering : Multi, Spot
Exposure Compensation ť2EV (0.5EV steps)
ISO Equivalent AUTO, 50, 100, 200, 400
Modes
Auto, Auto & Red-eye reduction, Fill-in flash, Slow sync, Flash off
Flash Range Wide : 0.25m ~ 2.0m, Tele : 0.5m ~ 1.5m
Recharging Time Approx. 5 sec.
Sharpness Soft, Normal, Vivid
Effect Normal, B&W, Sepia, Negative, Red, Green, Blue, RGB
Auto, Daylight, Cloudy, Fluorescent_H, Fluorescent_L,
Tungsten, Custom
Voice Recording (max. 1 hour.),
Voice Memo in Still Image (max. 10 sec.)
Date Imprinting Off , Date, Date & Time (user selectable)
Modes : Auto, Program, Scene,
ſ Scene : Night, Portrait, Children, Landscape, Close-up,
Sunset, Dawn, Backlight, Fireworks, Beach & Snow
Continuous : Single, Continuous, AEB
Self-timer : 2 sec., 10 sec., Double(10 sec., 2 sec.)
With Audio or without Audio
(user selectable, recording time : memory capacity dependent)
Size : 640x480,320x240,160x128 (3.0XOptical Zoom,Mute during Zoom Operation)
Frame rate : 30 fps, 15 fps Movie Stabilizer (User Selectable, Memory card only)
Movie Editing (Embeded) : Pause during recording, Still Image
Capture,Time Trimming
Internal memory: Approx. 10MB flash memory
External memory: SD card /MMC (Up to 512MB Guaranteed)
Focal Length
Digital Zoom
Focusing
Range
Shutter
White Balance
Voice Recording
Shooting
Storage
Still Image
Movie Clip
Media
ŝ101Ş
Specifications
Still Image : JPEG (DCF), EXIF 2.2, DPOF 1.1, PictBridge 1.0
Movie Clip : AVI (MPEG-4) Audio : WAV
5M : 2592x1944 4M : 2272x1704
3M : 2048x1536 2M : 1600x1200
1M : 1024x768 VGA : 640x480
5M : Super Fine 2, Fine 5, Normal 9
4M : Super Fine 3, Fine 7, Normal 12
3M : Super Fine 4, Fine 8, Normal 16
2M : Super Fine 8, Fine 15, Normal 22
1M : Super Fine 21, Fine 30, Normal 38
VGA : Super Fine 47, Fine 56, Normal 62
ſ
These figures are measured under Samsung’s standard
conditions and may vary depending on shooting
conditions and camera settings.
Type Single image, Thumbnails, Slide show, Movie Clip, Album
Editing Trimming, Rotating, Resizing, Effect
Digital output connector : USB 2.0 Audio : Mono
PictBridge
Primary Batteries: 2 x AA alkaline, or CR-V3(Lithium) battery
Secondary Batteries: 2 x Ni-MH, Samsung SBP-1303(Lithium Ion)
ſ Included battery may vary depending on sales region.
Dimensions (WxHxD) 105.4 x 56.5 x 31.8(excluding the projecting parts of the camera)
Weight Approx. 140g (without battery and card)
Operating Temperature 0 ~ 40ŭC
Operating Humidity 5 ~ 85%
Storage Driver
(Windows98/98SE/2000/ME/XP, Mac OS 9.0 ~ 10.2)
Digimax Master
Optical 3.0X Zoom for Movie & Still
2.5" 200K TFT LCD
Movie Clip - MPEG-4
VGA 30fps, Supporting Edit on DSC, Movie Stabilizer
Easy Mode Change M Button
Delightful Effect - Color Effect, Highlight, Composite, Photo Frame
* Specifications are subject to change without prior notice.
* All trademarks are the property of their respective owners.
Capacity
(10MB)
Image Size
Storage
Interface
Image Play
Power Source
Software
Special Features
Application
Camera Driver
File Format
ŝ118Ş
1. A USB Driver for MAC is not included with the software CD as MAC OS supports the
camera driver.
2. Check the MAC OS. This camera is compatible with MAC OS 9.0~10.2.
3. Connect the camera to the Macintosh and turn the camera power on.
4. A new icon will be displayed on the desktop after connecting the camera to the MAC.
Using the USB Driver for MAC
Setting up the USB Driver for MAC
1. Double click a new icon on the desktop and the folder in the memory will be displayed.
2. Select an image file and copy or move it to MAC.
ƃ For Mac OS 10.0 or later : First complete uploading from computer to camera and then
remove the removable disk with the Extract command.
ƃ If a movie clip can’t play back on the Mac OS, please visit the following site.
http://www.divx.com/divx/mac/
Or, use a media player that supports the Xvid codec (Mplayer, VLC(VideoLAN Client)
media player
CAUTION
6. A [Unplug or Eject Hardware] window will open.
Click the [Close] button and the removable disk
will be removed safely.
7. Unplug the USB cable.
[Click !]
Removing the removable disk
ŝ119Ş
ƈ You can download, view, edit and save your digital image and movie clip with this software.
This software is only compatible with Windows.
ƈ To start the program, click [Start ƍ Programs ƍ Samsung ƍ Digimax Master].
ƃ Downloading images
1. Connect the camera to your PC.
2. A window for downloading images will display after
connecting the camera and your PC.
- To download the captured images, select the [All(A)]
button.
- Select desired folder in the window and click the
[All(A)] button. You can save captured images and
selected folder.
- If you click the [Cancel] button, downloading will be
cancelled.
3. Click [Next(N) >] button.
[Click !]
[Click !]
Digimax Master
ŝ120Ş
7. Downloaded images will be displayed.
4. Select a destination and make a folder to save
downloaded images and folder.
- Folders will be made in order of date and images will
be downloaded.
- Folder name will be made as you want and images
will be downloaded.
- After selecting a folder that was made before,
images will be downloaded.
5. Click [Next(N) >] button.
6. A window will open as shown alongside.
The destination of selected folder will be displayed
on the upper side of the window. Click the [Start]
button to download the images.
[Click !]
[Click !]
Digimax Master
ŝ123Ş
ƃ
Movie edit : You can get the still image, movie clip, narration, music files together in a movie clip.
- Movie clip edit functions are listed below.
ڹ Edit menu : You can select the following menus.
[Add] : You can add a desired multi media in a movie clip.
[Edit] : You can change the brightness, contrast, colour and saturation.
[Effect] : You can insert an effect.
[Text] : You can insert texts.
[Narration] : You can insert a narration.
[Make] : You can save the edited multi media as a new file name.
You can select AVI, Windows media (wmv), Windows media (asf) and movie clip for
this camera (avi, MPEG-4) file types.
ں Frame display window : You can insert multi media in this window.
ſ Refer to the [Help] menu in Digimax Master for further information.
ڹ
ں
Digimax Master
6806-2861
SAMSUNG TECHWIN CO., LTD.
OPTICS & DIGITAL IMAGING DIVISION
145-3, SANGDAEWON 1-DONG, JUNGWONGU,
SUNGNAM-CITY, KYUNGKI-DO, KOREA
462-121
TEL : (82) 31-740-8086,8088, 8090, 8092, 8099
FAX : (82) 31-740-8398, 8111
www.samsungcamera.com
SAMSUNG OPTO-ELECTRONICS AMERICA, INC.
HEADQUARTERS
40 SEAVIEW DRIVE, SECAUCUS, NJ07094, U.S.A.
TEL : (1) 201-902-0347
FAX : (1) 201-902-9342
WESTERN REGIONAL OFFICE
18600 BROADWICK ST.,
RANCHO DOMINGUEZ, CA 90220, U.S.A.
TEL : (1) 310-900-5263/5264
FAX : (1) 310-537-1566
www.samsungcamerausa.com
SAMSUNG OPTO-ELECTRONICS UK LIMITED
SAMSUNG HOUSE
1000 HILLSWOOD DRIVE
HILLSWOOD BUSINESS PARK
CHERTSEY KT16 OPS U.K.
TEL : 00800 12263727
(free for calls from UK only)
UK Service Hotline : 01932455320
www.samsungcamera.co.uk
SAMSUNG OPTO-ELECTRONICS GMBH
AM KRONBERGER HANG 6
D-65824 SCHWALBACH/TS., GERMANY
TEL : 49 (0) 6196 66 53 03
FAX : 49 (0) 6196 66 53 66
www.samsungcameras.de
SAMSUNG FRANCE S.A.S.
BP 51 TOUR MAINE MONTPARNASSE
33, AV .DU MAINE
75755, PARIS CEDEX 15, FRANCE
HOTLINE PHOTO NUMÉRIQUE :
00 800 22 26 37 27(Numéro Vert-Appel Gratuit)
TEL : (33) 1-4279-2200
FAX : (33) 1-4538-6858
www.samsungphoto.fr
SAMSUNG TECHWIN MOSCOW OFFICE
RUSSIA, 125167, MOSCOW LENNINGRADSKY,
PR-KT, 37-A, KORP14
TEL : (7) 095-258-9299/96/98
FAX : (7) 095-258-9297
http://www.samsungcamera.ru
TIANJIN SAMSUNG OPTO-ELECTRONICS CO.,LTD.
7 PINGCHANG ROAD NANKAI DIST., TIANJIN
P.R CHINA
POST CODE:300190
TEL : (86) 22-2761-4599
FAX : (86) 22-2769-7558
www.samsungcamera.com.cn
ҧ
Internet address - http : //www.samsungcamera.com/
The CE Mark is a Directive conformity
mark of the European Community (EC)
47

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Samsung Digimax A 50 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Samsung Digimax A 50 in de taal/talen: Engels als bijlage per email.

De handleiding is 9,06 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Samsung Digimax A 50

Samsung Digimax A 50 Gebruiksaanwijzing - Nederlands - 128 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info