BEFORE CONTACTING A SERVICE CENTER
Symptoms
The power is not
turned on
The power is
turned off during
use
The battery
power is draining
quickly
Camera does not
take pictures
when the Shutter
button is being
pressed
The focus cannot
be adjusted
The flash does
not work
The incorrect
date/time is
displayed
Camera fails to
work by any
button or switch
The batteries need replacing
The camera has automatically turned itself
off.
The card is taken out before the image is
saved onto it.
The adapter has not been connected
properly
The external temperature is too cold
The camera is using both old and new
batteries
The camera is not set to RECORD mode
SmartMedia
TM
card is not inserted
The memory card has not been initialized.
Memory card is almost drained
The batteries are weak
The power has not been switched on
You have selected the incorrect shooting
mode
The camera flash is turned off
The wrong date/time is displayed or has
been saved as basic numbers
Camera is not working properly
Replace the batteries with new ones
Power on.
Do not remove the memory card while you
save the image.
Plug the adapter in correctly
Keep batteries at the correct temperature
Replace all batteries with new ones
Set it to RECORD mode
After turning off the camera, insert the Card
Initialize
Insert new Card from manufacturer
Replace the batteries with new ones
Power on
If the subject is closer than 0.6m, select
macro mode and if the subject is beyond
0.6m, select normal mode
Please change the flash mode to Fill in or
Auto
Select the appropriate date in SETUP mode
Remove the batteries and insert them again.
The batteries need replacing
The AC Power Adapter is not connected
Replace the batteries with new ones
Connect the AC Power Adapter
Causes Steps
