623985
8
Verklein
Vergroot
Pagina terug
1/64
Pagina verder
Stage v166:
Handheld Wireless System
OWNER'S MANUAL
Copyright 2015
v3.2
Samson Technologies Corp.
45 Gilpin Avenue
Hauppauge, New York 11788-8816
Phone: 1-800-3-SAMSON (1-800-372-6766)
Fax: 631-784-2201
www.samsontech.com
Owner's Manual 3Stage v166: Handheld Wireless System
ENGLISH
FRANÇAISDEUTSCHEESPAÑOLITALIANO
Important Safety Information
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning ash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of non-insulated dangerous volt-
age” within the product’s enclosure that may be of sucient magnitude to
constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance instructions
in the literature accompanying the appliance.
If you want to dispose this product, do not mix it with general household waste. There is a
separate collection system for used electronic products in accordance with legislation that
requires proper treatment, recovery and recycling.
Private household in the 25 member states of the EU, in Switzerland and Norway may return their used
electronic products free of charge to designated collection facilities or to a retailer (if you purchase a similar
new one).
For Countries not mentioned above, please contact your local authorities for a correct method of disposal.
By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and
recycling and thus prevent potential negative effects on the environment and human health.
ATTENTION
RISQUE D’ÉLECTROCUTION !
NE PAS OUVRIR !
WARNING
TO PREVENT FIRE OR SHOCK HAZARD. DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RE-
CEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE
EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE. TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE PLUG TO WIDE SLOT AND
FULLY INSERT.
4 Stage v166: Handheld Wireless System
Important Safety Information
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation open-
ings. Install in accordance with the
manufacturers instructions.
8. Do not install near any heat sources
such as radiators, heat registers,
stoves, or other apparatus (including
ampliers) that produce heat.
9. Do not defeat the safety purpose
of the polarized or grounding type
plug. A polarized plug has two
blades with one wider than the
other. A grounding type plug has
two blades and a third grounding
prong. The wide blade or the third
prong are provided for your safety.
If the provided plug does not t into
your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being
walked on or pinched particularly at
the plugs, convenience receptacles,
and at the point where they exit from
the apparatus.
11. Only use attachments/accessories
specied by the manufacturer.
12. Use only with the cart, stand, tripod,
bracket, or table specied by the
manufacturer, or sold with the ap-
paratus. When a cart
is used, use caution
when moving the cart/
apparatus combina-
tion to avoid injury
from tip-over.
13. Unplug the apparatus during light-
ening, sort or when unused for long
periods of time. Refer all servicing
to qualied personnel. Service is re-
quired when the apparatus has been
damaged in any way, such as power
supply cord or plug is damaged, liq-
uid has been spilled or objects have
fallen into the apparatus has been
exposed to rain or moisture, does
not operate normally, or has been
dropped.
14. This appliance shall not be exposed
to dripping or splashing water and
that no object lled with liquid such
as vases shall be placed on the ap-
paratus.
15. Caution-to prevent electrical shock,
match wide blade plug wide slot
fully insert.
16. Please keep a good ventilation envi-
ronment around the entire unit.
17. The direct plug-in adapter is used as
disconnect device, the disconnect
device shall remain readily operable.
18. Batteries(battery pack or batteries
installed) shall not be exposed to
excessive heat such as sunshine, re
or the like.
Owner's Manual 5Stage v166: Handheld Wireless System
ENGLISH
FRANÇAISDEUTSCHEESPAÑOLITALIANO
Table of Contents
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Receiver Controls and Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Transmitter Controls and Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Quick Start Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
6 Stage v166: Handheld Wireless System
Congratulations on purchasing the Samson Stage v166 Wireless Microphone System! The Stage
v166 system is the perfect solution for any application requiring high quality, wireless micro-
phones in an easy to use, compact package. The system features the SR166 receiver and HT6
handheld microphone transmitter.
With the Stage v166 system, you’ll have great sound quality with clear reception, and the ability
to walk freely around your venue. For any live sound application (karaoke, schools, conferences,
houses of worship, etc.) the Stage v166 is the ideal tool for your wireless microphone needs. The
Stage v166 always provides outstanding performance and reliability.
Although this product is designed for intuitive operation, we suggest you take some time to
go through these pages to learn how we’ve implemented a number of unique features, and to
get step-by-step instructions for setting up your system. If your Stage v166 was purchased in
the United States, you’ll also nd a warranty card enclosed—please don’t forget to ll it out and
mail it in so that you can receive online technical support, and so that we can send you updated
information about this and other Samson products. Also, be sure to check out our website
(www.samsontech.com) for complete information about our full product line.
We recommend that you record your serial number in the space provided below, for future refer-
ence.
Serial number:_______________________________
Date of purchase:____________________________
Should your unit ever require servicing, a Return Authorization (RA) number must be obtained
before shipping your unit to Samson. Without this number, the unit will not be accepted. Please
call Samson at 1-800-3SAMSON (1-800-372-6766) for an RA number prior to shipping your unit.
Please retain the original packing materials and, if possible, return the unit in the original carton.
If you purchased your Samson product outside the United States, please contact your local dis-
tributor for warranty information and service.
Features
Professional, handheld wireless system.
Easy setup and operation.
Crystal-controlled, Superheterodyne circuitry for clear and reliable reception.
¼” output
Up to 250’ of line-of-sight operating range.
HT6 handheld microphone transmitter with mute switches
Transmitter provides nine hours of battery life, using standard 9-volt batteries.
Introduction
Owner's Manual 7Stage v166: Handheld Wireless System
ENGLISH
FRANÇAISDEUTSCHEESPAÑOLITALIANO
1. Power Switch - Press to turn the receiver on or o.
2. Power Indicator - Lights red when
the receiver is powered on.
3. Volume Control - Rotate to adjust
the level of the audio signal out-
put from receiver.
4. RF Indicator - Lights green when
the HT6 transmitter is powered on,
and there is an RF signal present
and detected by the receiver.
5. Antenna - The antenna mountings
allow full rotation for optimum
placement. In normal operation,
both antennas should be placed
in a vertical position. The anten-
nas can be folded inward for
convenience when transporting
the SR166.
6. DC Input - Connect the sup-
plied 12-volt, 200 mA power
adapter here.
WARNING: The substitution
of any other kind of power
adapter can cause severe dam-
age to the SR166 and will void
your warranty.
7. Output - Use this unbalanced, ¼” jack to connect the SR166 receiver to the line level input of
a mixer, amplifier, or other audio equipment.
8. Adaptor Strain Relief - Loop the included adaptor’s cord through the
strain relief to prevent the plug from accidentally detaching from the
receiver.
6 87
234
1
5
SR166 Receiver Controls and Features
6 87
234
1
5
8 Stage v166: Handheld Wireless System
1. Audio ON/OFF Switch - When set to the ON position, audio signal
is transmitted. When set to the OFF position, the audio signal is
muted. Note that moving this switch to the OFF position does not
turn o the transmitter power—it is simply a way to temporarily
mute the transmission of audio signal. When not in use for extended
periods, the transmitter power should be turned o by using the
power ON/OFF switch.
2. Power ON/OFF Switch - Use this switch to turn the HT6 on or o (to
conserve battery power, be sure to leave it o when not in use).
Be sure to mute the audio signal at your external mixer or amplifier
before turning transmitter power on or off, or an audible pop may
result.
3. Power Indicator - LED lights green when the transmitter is powered
on.
4. Battery Compartment - Insert a standard 9-volt alkaline battery
here. Be sure to observe the plus and minus polarity markings when
installing the battery. We recommend the Duracell MN 1604 type
battery for use with this device. Although rechargeable Ni-Cad
batteries can be used, they do not supply adequate current for more
than four hours.
WARNING: Do not insert the battery backwards; doing so can cause
severe damage to the HT6 and will void your warranty.
5. Channel Marking - Printed number corresponding to the appro-
priate channel on the SR166 receiver.
HT6 Transmitter Controls and Features
1
3
4
5
2
1
3
4
5
2
Owner's Manual 9Stage v166: Handheld Wireless System
ENGLISH
FRANÇAISDEUTSCHEESPAÑOLITALIANO
Quick Start Guide
Follow these basic procedures for setting up and using your Stage v166 Series Wireless System.
1. Connect the SR166 receiver power
adaptor to the rear panel DC input, and
then to an electrical outlet.
2. Connect the receiver’s appropriate ¼” output to the input of a mixer, stereo, karaoke machine,
or any other line level input (see below).
Use the included ¼” to ¼” cable to connect
the SR166 receiver to a mixer.
Use the included ¼” to ¼” cable to connect
the SR166 receiver to karaoke machine.
1. Plugging the receiver into the wall.
2. Plugging the receiver into a mixer using 1/4" - 1/4" cable.
4. Plugging the receiver into a Karaoke machine using 1/4" - 1/4" cable.
10 Stage v166: Handheld Wireless System
3. While holding the upper section of the
HT6 transmitter, rotate the bottom section
and slide down to expose the battery
compartment.
Insert a standard 9-volt alkaline battery, being
sure to follow the plus and minus polarity
markings.
4. Turn on the HT6 transmitter by sliding the POWER switch
to the right, and replace the bottom section.
5. Place the SR166 receiver where it will be used (the general rule of thumb is to maintain “line
of sight” between the receiver and transmitters so that the person(s) using the transmitter can
see the receiver). Turn on the power of the SR166 receiver.
6. Turn on the connected amplifier and/
or mixer, but keep its volume all the
way down. Next, make sure that your
transmitter is un-muted by setting
its Audio switch to ON. Then, set the
Volume Control knob on the SR166
fully clockwise; this is unity gain.
Speak or sing into the mic at a normal
performance level while slowly raising
the volume of your amplifier/mixer until
the desired level is reached.
Quick Start Guide
1. Plugging the receiver into the wall.
2. Plugging the receiver into a mixer using 1/4" - 1/4" cable.
4. Plugging the receiver into a Karaoke machine using 1/4" - 1/4" cable.
Owner's Manual 11Stage v166: Handheld Wireless System
ENGLISH
FRANÇAISDEUTSCHEESPAÑOLITALIANO
OVERALL SYSTEM SPECIFICATIONS
Operating Frequency VHF 173.80 MHz to 213.20 MHz
Number of Channels Fixed channel
Frequency Stability ±0.005%
Modulation Mode FM
Maximum Deviation ±15 kHz
Operating Range 250’ (line of sight)
Operating Temperature Range 40° F (4° C) to 110° F (43° C)
Frequency Response 80 Hz to 15 kHz
SR166 RECEIVER SPECIFICATIONS
Image Rejection 30 dB
Dynamic range 95.5 dB
Maximum Output 900mV
Sensitivity 10 dBµV for 48 dB S/N
Output Connectors 1/4” TS (“mono”) phone jack
Audio Output Level -10dB unbalanced (1/4” phone connector)
Power Supply 100-240V AC (50/60 Hz) to 12V DC 200mA
HT6 HANDHELD TRANSMITTER SPECIFICATIONS
RF Power Output 10 mW
Microphone Element H6 Dynamic unidirectional
Typical Battery Life (9-volt alkaline battery) 9-hours
Current Consumption 30 mA typical
Dimensions Ø2.1” x 9.3”
Ø52.6 mm x 235.5 mm
Net Weight 0.4 lbs
0.18 kg
Specications
12 Stage v166: Handheld Wireless System
Issue Solutions
No Audio
Turn on the HT6 transmitter using the Power ON/OFF switch.
Ensure the HT6 transmitter’s batteries are installed correctly.
Check that the HT6 Audio ON/OFF switch is in the ON position.
Conrm that the SR166 adaptor is correctly connected and
plugged into an electrical outlet.
Turn on the SR166 receiver.
Make sure the SR166 output and audio input connections are
securely connected.
Ensure that the SR166 receiver and HT6 transmitters are in line of
sight with one another.
Check the receiver and audio input device level controls.
Distorted Audio
Check the receiver output level and audio input device level.
Check the HT6’s batteries and replace if low.
Another transmitter may be broadcasting on the same channel.
Turn o transmitter that may be causing interference.
Audio Dropout
The transmitter may be too far away from the receiver. Move
closer to the receiver, or reposition the antennas.
Remove any sources that may cause RF interference, such as cell
phones, cordless phones, lighting equipment, computers, etc.
Transmitters and Receiver
on Dierent Channels
Contact your Samson reseller or distributor for assistance.
Troubleshooting
FCC Rules and Regulations
Samson wireless receivers are certified under FCC Rules part
15 and transmitters are certified under FCC Rules part 74.
Licensing of Samson equipment is the user’s responsibility
and licensability depends on the user’s classification, appli-
cation and frequency selected.
This device complies with RSS-210 of
Industry & Science Canada.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference and (2)
this device must accept any interference received, includ-
ing interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment gener-
ates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful inter-
ference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the fol-
lowing measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced Radio/TV technician for help.
WARNING: Changes or modifications not expressly approved by the
party responsible for compliance could void the users authority to
operate the equipment.
Owner's Manual 15Stage v166: Système sans fils portable
ENGLISH
FRANÇAISDEUTSCHEESPAÑOLITALIANO
CET APPAREIL EST CONFORME À LA PARTIE 15 DU RÈGLEMENT
DE LA FCC, CLASSE B. LE FONCTIONNEMENT EST SOUMIS AUX
DEUX CONDITIONS SUIVANTES : (1) CET APPAREIL NE PEUT
CAUSER D'INTERFÉRENCES NUISIBLES ET (2) IL DOIT ACCEPTER
TOUTE INTERFÉRENCE REÇUE, NOTAMMENT CELLES POUVANT
ENTRAÎNER UN DYSFONCTIONNEMENT. IDÉAL POUR TOUTE
UTILISATION AU BUREAU OU À DOMICILE.
Consignes de sécurité importantes
ATTENTION: POUR ÉVITER TOUT RISQUE D'ÉLECTROCUTION, N'ÔTEZ PAS LE COU-
VERCLE (NI LE DOS) DU BOITIER. CET APPAREIL NE CONTIENT AUCUNE PIÈCE REM-
PLAÇABLE PAR L'UTILISATEUR. Conez toutes les réparations à du personnel qualié.
Le signe avec un éclair dans un triangle prévient l’utilisateur de la présence
d’une tension dangereuse et non isolée dans l’appareil. Cette tension
constitue un risque d’électrocution.
Le signe avec un point d’exclamation dans un triangle prévient l’utilisateur
d’instructions importantes relatives à l’utilisation et à la maintenance du
produit.
Si vous souhaitez jeter ce produit, ne le mettez pas le container pour déchets ménagers.
Le ramassage des équipements électroniques se fait séparément pour assurer le recyclage
correct de ces équipements.
Les citoyens des 25 états membres de la CEE, les Suisses et les Norvégiens peuvent apporter leurs produits
électroniques sans frais dans des points de collecte désignés, ou auprès d'un revendeur (lorsqu'un nouveau
produit est acheté).
Pour les pays non mentionnés ci-dessus, il faut contacter les autorités locales pour connaitre la marche à suivre.
En procédant ainsi, vous êtes assuré que votre produit sera correctement traité, récupéré et recyclé afin de
prévenir les effets négatifs possibles sur l'environnement et la santé.
ATTENTION
RISQUE D’ÉLECTROCUTION !
NE PAS OUVRIR !
ATTENTION
POUR EVITER LES RISQUES D'INCENDIE OU DE DECHARGE ELECTRIQUE, ne pas utilisez cette prise
de courant avec un l d'extention ; prise de contact ou additionnez l'autre sortie sauf que les
tranchants peuvent être complètement insérés pour prévenir l'exposition de tranchant. POUR
EVITER LES RISQUES D'INCENDIE OU DE DECHARGE ELECTRIQUE, N'EXPOSEZ PAS CET APPAREIL A
LA PLUIE OU L'HUMIDITE POUR PREVENIR LES CHOCS ELECTRIQUES, N'INSEREZ LA LAME LARGE
DE LA FICHE QUE DANS LA FENTE DE LARGE DE LA PRISE.
16 Stage v166: Système sans fils portable
Consignes de sécurité importantes
1. Lisez ces instructions.
2. Conservez ces instructions.
3. Respectez les avertissements.
4. Suivez les instructions..
5. N'utilisez pas cet appareil à proximité d'un
point d'eau.
6. Nettoyez-le avec un chion sec.
7. N'obstruez en aucun cas les orices d'aéra-
tion. Installez en respectant les consignes
du fabricant.
8. Ne l'installez pas à proximité d'une source
de chaleur telle qu'un radiateur, une
bouche de chaleur, un poêle ou d'autres
appareils (dont les amplicateurs) produi-
sant de la chaleur.
9. Ne détériorez pas la sécurité de la che
polarisée ou de la che de terre. Une prise
polarisée est composée de deux ches
dont l'une est plus large que l'autre. Une
che de terre comporte deux lames et
une troisième broche de mise à la terre. La
lame la plus large ou la troisième broche
assure la sécurité de l'utilisateur. Si la prise
de l'appareil ne rentre pas dans la prise
d'alimentation secteur de votre installa-
tion, veuillez consulter un électricien agréé
pour le remplacement de la prise secteur.
10. Placez le cordon d'alimentation de sorte
qu'il ne soit ni piétiné ni comprimé, en par-
ticulier au niveau de la che de connexion,
de la prise de courant et du point de sortie
de l'appareil.
11. Utilisez uniquement les accessoires et le
matériel de xation recommandés par le
fabricant.
12. Utilisez uniquement le
chariot, le pied, le trépied,
le support ou la table
recommandé par le fa-
bricant ou fourni avec l'ap-
pareil. Lors de l'utilisation
d'un chariot, veuillez faire attention lors
du déplacement de l'ensemble chariot/
appareil an d'éviter toute blessure en cas
de renversement.
13. Débranchez cet appareil pendant les
orages ou au cours des longues pé-
riodes de non utilisation. Faites eectuer
toutes les réparations nécessaires par du
personnel qualié. Des réparations sont
nécessaires si l'appareil est endommagé
d'une façon quelconque, par exemple :
cordon ou prise d'alimentation endom-
magé, liquide renversé ou objet tombé à
l'intérieur de l'appareil, exposition de l'ap-
pareil à la pluie ou à l'humidité, appareil
qui ne marche pas normalement ou que
l'on a fait tomber.
14. Cet appareil ne doit pas être exposé à des
éclaboussures ou des gouttes d'eau et
aucun objet rempli de liquide comme un
vase ne doit se trouver à proximité.
15. Attention - Pour prévenir les chocs élec-
triques, n'insérez la lame large de la che
que dans la fente large de la prise.
16. Veillez à ce que la zone autour de l'unité
soit bien aérée.
17. L'adaptateur à tête enchable est utilisé
comme dispositif de débranchement et
doit toujours être prêt à fonctionner.
18. Les batteries (kit batterie ou batteries
installées) ne peuvent pas être exposées
à une chaleur excessive telle que celle du
soleil, d'un feu ou d'une source similaire.
Owner's Manual 17Stage v166: Système sans fils portable
ENGLISH
FRANÇAISDEUTSCHEESPAÑOLITALIANO
Table des matières
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Commandes et caractéristiques du récepteur SR166 . . . . . . . . . . . . . . . . . . . . . 19
Commandes et caractéristiques de l'émetteur HT6 . . . . . . . . . . . . . . . . . . . . . . 20
Guide de prise en main. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Spécifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Assistance technique . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
18 Stage v166: Système sans fils portable
Merci d’avoir choisi ce système sans ls Samson Stage v166 Microphone! Le système Stage v166
convient parfaitement à toute application nécessitant des micros sans ls de très bonne qualité,
compacts et faciles à utiliser. Le système est équipé d'un récepteur SR166 et d'un émetteur micro
portable HT6.
Grâce à votre système Stage v166, vous obtiendrez un son clair et de grande qualité tout en ayant
la possibilité d'aller et venir librement. Peu importe l'événement (karaoké, écoles, conférences,
lieux de culte, etc.), le système Stage v166 est un outil qui satisfera pleinement vos besoins en mi-
cro sans ls. Le Stage v166 vous orira toujours des performances et une abilité exceptionnelles.
Même si ce produit a été conçu pour un fonctionnement intuitif, nous vous recommandons de
lire les pages suivantes pour prendre connaissance des caractéristiques uniques que nous avons
mises en place et des informations détaillées pour le réglage devotre système. Si vous avez
acheté ce système Stage v166 aux USA, vous trouverez une carte de garantie — remplissez-la
et renvoyez-la pour bénéficier de l’assistance en ligne et pour recevoir les informations sur les
produits SamsonVous trouverez également une carte de garantie : noubliez pas de la remplir et
de nous l’envoyer. Vous pourrez ainsi bénéficier de l’assistance technique en ligne et recevoir les
informations sur les produits Samson. Pensez également à consulter notre site Internet (www.
samsontech.com) pour obtenir des informations détaillées sur toute notre gamme de produits.
Prenez le temps de noter le numéro de série et la date d'achat pour toute référence ultérieure.
Numéro de série:
_______________________________
Date d'achat:
__________________________________
Pour faire réparer vos enceintes, vous devez tout d’abord obtenir un numéro de retour auprès de
Samson. Sans ce numéro, l’appareil ne sera pas accepté. Appelez Samson au : 1-800-3SAMSON
(1-800-372-6766) pour obtenir ce numéro avant de renvoyer votre unité. Conservez, si possible,
l’emballage d’origine an de l’utiliser en cas de retour. Pour les produits Samson achetés hors des
USA, contactez votre revendeur pour obtenir les informations sur la garantie et les réparations.
Caractéristiques
Système sans ls portable professionnel
Utilisation et prise en main faciles.
Circuit superhétérodyne géré par quartz orant une réception claire et able
Sortie ¼”
Portée de 205' (en ligne directe dégagée.
Micro portable émetteur professionnels HT6 avec touches de coupure
Chaque émetteur HT6 ore une autonomie de neuf heures, avec une pile de 9 Volts stan-
dard.
Introduction
Owner's Manual 19Stage v166: Système sans fils portable
ENGLISH
FRANÇAISDEUTSCHEESPAÑOLITALIANO
1. Interrupteur - Appuyez pour placer le récepteur sous/hors tension.
2. Témoin - S’allume en rouge avec
la mise sous tension.
3. Volume - Tournez le bouton pour
régler le niveau de sortie du signal
du récepteur.
4. Témoin HF - S’allume en vert
lorsque le micro portable émet-
teur HT6 est sous tension, et
lorsque le signal HF est présent et
détecté par le récepteur.
5. Antenne - Les embases d’an-
tennes permettent leur rotation
pour une position optimum. En
utilisation normale, les deux an-
tennes doivent être verticales. Les
antennes peuvent être pliées vers
l’avant, ce qui facilite le transport
du récepteur SR166.
6. Embase DC - - Reliez l’adapta-
teur secteur 12 Volts (200 mA)
fourni à cette embase.
ATTENTION: L’utilisation d’un
autre adaptateur secteur peut
causer des dommages sévères
au SR166, et annule la garantie
7. Sortie - Utilisez ce Jack asymétrique, ¼”pour connecter le récepteur SR166 à l’entrée ligne
d’une console de mixage, d’un amplificateur, ou tout autre équipement audio.
8. Passe-câble - Enroulez le cordon de l’adaptateur secteur dans le passe-
câble pour éviter que la che d’alimentation soit accidentellement
déconnectée.
6 87
234
1
5
Commandes et caractéristiques du récepteur SR166
6 87
234
1
5
20 Stage v166: Système sans fils portable
1. Interrupteur Audio ON/OFF - En position ON, le signal audio est
transmis En position OFF, le signal audio est coupé. Notez que
lorsque vous placez l’interrupteur en position OFF, vous ne placez
pas le micro hors tension — vous ne faites que couper la trans-
mission HF du signal audio. Lorsque vous ne l’utilisez plus, placez
l’émetteur hors tension avec l’interrupteur ON/OFF.
2. Interrupteur ON/OFF - Utilisez cet interrupteur pour placer l’inter-
rupteur HT6 sous/hors tension (pour économiser la pile, laisser le
micro hors tension lorsque vous ne l’utilisez pas).
Veillez à couper le signal audio sur la console de mixage ou l’ampli-
ficateur externe avant de placer l’émetteur sous/hors tension pour
éviter tout bruit de pop violent.
3. Témoin Led - Ce témoin s’allume en vert lorsque vous placez l’émet-
teur sous tension.
4. Compartiment de la pile - Insérez une pile de 9 Volts alcaline
standard dans ce compartiment. Respectez les polarités (+ et -) de
la pile. Nous conseillons la pile Duracell MN 1604 avec cet émetteur.
Bien que vous puissiez utiliser des accumulateurs rechargeables au
Ni-Cad, ceux-ci ne fonctionnent que pendant 4 heures.
ATTENTION: Veillez à ne pas insérer la pile à l’envers ; ceci endom-
magerait sérieusement le HT6 et annulerait la garantie.
5. Numéro de canal - Le numéro sérigraphié correspond au numéro
de canal sur le récepteur SR166.
Commandes et caractéristiques de l'émetteur HT6
1
3
4
5
2
1
3
4
5
2
Owner's Manual 21Stage v166: Système sans fils portable
ENGLISH
FRANÇAISDEUTSCHEESPAÑOLITALIANO
Guide de prise en main
Procédez comme suit pour installer et utiliser votre système sans fil Stage v166 :
1. Connectez l’adaptateur secteur entre
l’embase DC à l’arrière du récepteur
SR166 et la prise électrique.
2. Connectez la sortie en Jack¼” correspondant à l’émetteur à l’entrée d’une console de mixage,
d’un amplificateur, d’une machine de karaoké, ou à l’entrée de tout équipement à entrée ligne
(voir ci-dessous).
Utilisez le cordon Jack¼” ¼” fourni pour
relier le récepteur SR166 à la console de
mixage.
Utilisez le cordon adaptateur¼” ¼”
fourni pour relier le récepteur SR166 à un
équipement de karaoké.
1. Plugging the receiver into the wall.
2. Plugging the receiver into a mixer using 1/4" - 1/4" cable.
4. Plugging the receiver into a Karaoke machine using 1/4" - 1/4" cable.
22 Stage v166: Système sans fils portable
3. Tout en tenant fermement la partie supérieure
de l’émetteur HT6, faites tourner la partie
inférieure et faites-la glisser vers le bas pour
ouvrir le compartiment de la pile
Insérez une pile alcaline de 9Volts standard,
en respectant les polarités.
4. Placez l’émetteur HT6 sous tension en plaçant
l’interrupteur POWER sur la droite et replacez la section
inférieure du micro.
5. Placez le récepteur SR166 où il sera utilisé pendant la prestation (pensez à conserver une ligne
de mire directe entre l’émetteur et le récepteur, exempte de tout obstacle — l’utilisateur du
micro doit voir le récepteur). Placez le récepteur SR166 sous tension.
6. Placez la console de mixage ou
l’amplificateur connecté, en veillant à
régler son volume au minimum. Veillez
à ce que la transmission de l’émetteur
soit assurée, en veillant à ce que le
sélecteur Audio soit en position ON.
Ensuite, montez le bouton de Volume du
SR166 au maximum, ce qui correspond
au gain unitaire. Parlez ou chantez
normalement dans le micro tout en
montant progressivement le volume de
votre amplificateur/mélangeur jusqu’à
obtenir le niveau sonore souhaité.
Guide de prise en main
1. Plugging the receiver into the wall.
2. Plugging the receiver into a mixer using 1/4" - 1/4" cable.
4. Plugging the receiver into a Karaoke machine using 1/4" - 1/4" cable.
Owner's Manual 23Stage v166: Système sans fils portable
ENGLISH
FRANÇAISDEUTSCHEESPAÑOLITALIANO
CARACTÉRISTIQUES SYSTÈME GÉNÉRALES
Fréquence VHF 173.80 MHz à 213.20 MHz
Nombre de canaux Canal xe
Stabilité en fréquence ±0,005 %
Mode de modulation FM
Déviation maximum ±15 kHz
Portée 250' (en ligne directe)
Plage de température de fonctionnement 4° C à 43° C
Réponse en fréquence 80 Hz à 15 kHz
CARACTÉRISTIQUES DU RÉCEPTEUR SR166
Réjection d’image 3 0 dB
Plage dynamique 95,5 dB
Niveau de sortie maximum ±900mV
Sensibilité 10 dBµV pour un signal/bruit de 48 dB
Connecteurs de sortie Jacks 1/4” mono
Niveaux de sorties audio -10 dB asymétrique (Jack 1/4")
Alimentation 100-240 Vca (50/60 Hz) vers 12 Vcc, 200mA
CARACTÉRISTIQUES DU MICRO PORTABLE ÉMETTEUR HT6
Puissance HF 10 mW
Élément du micro Capsule H6, dynamique, unidirectionnelle
Autonomie type (pile alcaline de 9 Volts) 9 heures
Consommation en courant 30 mA, type
Dimensions Ø2.1” x 9.3”
Ø52.6 mm x 235.5 mm
Poids net 0,4 lbs
0,18 kg
Spécications
24 Stage v166: Système sans fils portable
Problème Solutions
Pas de signal audio
Placez l’émetteur HT6 sous tension avec l’interrupteur ON/OFF
Vériez que la pile de l’émetteur HT6 soit installée correctement
Vériez que l’interrupteur Audio ON/OFF du HT6 soit sur ON.
Vériez que l’adaptateur secteur SR266 soit correctement
connecté et relié à une prise secteur.
Placez le récepteur SR166 sous tension.
Vériez que la sortie audio du SR166 et les entrées audio de tous
les équipements soient correctement connectées.
Vériez que le récepteur SR166 et les émetteurs HT6 soient en
ligne directe.
Vériez le réglage de niveau sur le récepteur et sur la console de
mixage.
Distorsion audio
Vériez le réglage de niveau sur le récepteur et sur la console de
mixage.
Contrôlez la pile de l’émetteur HT6. Remplacez-la si besoin est.
Il se peut qu’un autre émetteur utilise la même fréquence que
vous. Placez l’émetteur qui semble causer le problème hors
tension.
Décrochages audio
Lémetteur est trop loin du récepteur. Rapprochez-vous du récep-
teur, ou essayez de modier la position des antennes.
Placez hors tension toutes les sources qui peuvent causer des
interférences HF, comme les téléphones portables, sans l, équi-
pements d’éclairage, ordinateurs, etc.
Lémetteur et le récep-
teur sont sur des canaux
diérents
Contactez votre revendeur ou votre distributeur Samson et
demandez son aide.
Assistance technique
Régulations FCC
Les systèmes Samson répondent aux normes FCC, alinéa 15
et les émetteurs répondent aux normes FCC, alinéa 74.
Lobtention des licences pour l’utilisation des produits
Samson est de la responsabilité du client et dépend du pays
d’utilisation.
Cet appareil est conforme à RSS-310 de l'industrie canadienne.
Le fonctionnement du dispositif est soumis aux deux conditions
suivantes:
(1) cet appareil ne doit pas causer d’interférences et
(2) cet appareil doit fonctionner en présence d’interférences
externes, ce qui comprend les interferences qui peuventgénérer
un dysfonctionnement.
REMARQUE:
Cet équipement a été testé et déclaré conforme aux
limites pour appareils numériques de classe B, selon la section 15 des
règlements de la FCC. Ces restrictions visent à garantir une protection
suffisante contre les interférences nuisibles dans une installation à
domicile. Cet appareil génère et utilise un rayonnement de fréquence
radio et peut causer des interférences nuisibles aux communications
radio s'il n'est pas installé ou utilisé conformément aux instructions.
Cependant, il n'existe aucune garantie contre ces interférences dans le
cas où l'installation n'est pas conforme. Si cet appareil cause des interfé-
rences nuisibles à la réception des signaux de radio ou de télévision, ce
qui peut être déterminé en allumant et en éteignant l'appareil, l'utilisa-
teur peut tenter de résoudre le problème de l'une des façons suivantes:
- Réorientez ou repositionnez l'antenne de réception.
- Augmentez la distance séparant l'équipement du récepteur.
Branchez l'appareil sur un circuit différent de celui du récepteur.
Demandez conseil à un fournisseur ou technicien radio/TV spécialisé.
ATTENTION: Les changements ou les modifications non expressément
approuvées par le fabricant peuvent annuler l'autorisation de l'utilisa-
teur à faire fonctionner l'équipement.
Owner's Manual
27
Stage v166: Handheld Wireless System
ENGLISH
FRANÇAISDEUTSCHEESPAÑOLITALIANO
DIESES GERÄT ENTSPRICHT DEM TEIL 15 DER VERORDNUNGEN
DER KLASSE B. DER BETRIEB UNTERLIEGT FOLGENDEN ZWEI
BEDINGUNGEN: (1) DIESES GERÄT DARF KEINE GEFÄHRLICHEN
STÖRUNGEN VERURSACHEN UND (2) DIESES GERÄT MUSS
STÖRUNGEN AKZEPTIEREN, DIE EINEN UNERWÜNSCHTEN
BETRIEB DIESES GERÄTS VERURSACHEN KÖNNEN. GEEIGNET FÜR
DEN EINSATZ ZU HAUSE UND IM BÜRO.
Wichtige Sicherheitshinweise
ACHTUNG: UM DAS RISIKO EINES ELEKTRISCHEN SCHLAGS ZU REDUZIEREN NICHT DIE
HINTERE ABDECKUNG ENTFERNEN. ES ENTHÄLT KEINE VOM BENUTZER ZU WARTENDEN
TEILE. ÜBERGEBEN SIE DAS GERÄT NUR QUALIFIZIERTEM PERSONAL ZUR REPARATUR.
Dieser Blitz mit einem Pfeil als Symbol in einem gleichseitigen Dreieck soll
den Benutzer auf das Vorhandensein von gefährlicher Spannung” im Ge-
häuse des Produkts hinweisen. Diese Spannung ist unter Umständen groß
genug, um ein Risiko für einen elektrischen Schlag darzustellen.
Der Ausrufungszeichen in einem gleichseitigen Dreieck soll den Benutzer
in der mit dem Gerät mitgelieferten Dokumentation auf eine wichtige Be-
triebs- oder Wartungsanweisung hinweisen.
Wenn Sie das Produkt entsorgen möchten, geben Sie es nicht in den Hausmüll. In Übereinstimmung mit
der Gesetzgebung existiert ein separates Sammelsystem für elektrische und elektronische Produkte.
Diese Gesetze fordern eine angemessene Behandlung, Verwertung und Wiederaufbereitung solcher Geräte.
Private Haushalte in den 25 Mitgliedsstaaten der EU, in der Schweiz und Norwegen können ihre elektronischen Produkte
kostenlos an eine Sammelstelle oder den Händler abgeben (wenn Sie ein ähnliches Produkt wieder erwerben).
Verbraucher in Ländern, die nicht oben genannt werden, kontaktieren bitte ihre lokalen Behörden, um Informationen
über eine korrekte Entsorgung zu erhalten.
Sie werden so sicherstellen, dass Ihr Produkt der notwendigen Behandlung, Verwertung und Wiederaufbereitung unter-
zogen wird und eventuelle negative Auswirkungen auf die Umwelt und die Gesundheit vermieden werden.
ACHTUNG:
GEFAHR EINES ELEKTRISCHEN SCHLAGS,
NICHT ÖFFNEN
WARNUNG
UM EINEN ELEKTRISCHEN SCHOCK ZU VERMEIDEN, BENUTZEN SIE DEN GEPOLTEN STECKER
NICHT MIT EINER VERLÄNGERUNGSSCHNUR, EINER STECKDOSE ODER ANDEREN STECKERN, ES
SEI DENN, DIE KONTAKTE KÖNNEN VOLLKOMMEN HINEINGESTECKT WERDEN. UM BRANDGEFAHR
UND GEFAHREN EINES SCHOCKS ZU VERMEIDEN, SETZEN SIE DAS GERÄT WEDER WASSER NOCH
FEUCHTIGKEIT AUS. UM EINEN ELEKTRISCHEN SCHOCK ZU VERMEIDEN, MUSS DER BREITE FLACH-
KONTAKT VOLLKOMMEN IN DIE BREITE BUCHSE EINGEFÜHRT WERDEN.
28
Stage v166: Handheld Wireless System
Wichtige Sicherheitshinweise
1. Lesen Sie diese Anweisungen.
2. Bewahren Sie diese Anweisungen auf.
3. Beachten Sie alle Warnungen.
4. Folgen Sie allen Anweisungen.
5. Benutzen Sie das Gerät nicht in der Nähe
von Wasser.
6. Reinigen Sie es nur mit einem trockenen
Tuch.
7. Verschließen Sie keine Ventilationsö-
nungen. Installieren Sie das Gerät gemäß
den Anweisungen des Herstellers.
8. Installieren Sie es nicht in der Nähe von
Wärmequellen wie Radiatoren, Heiz-
körpern, Öfen oder anderen Geräten
(einschließlich Verstärker), die Hitze
erzeugen.
9. Umgehen Sie nicht die Sicherheitsfunk-
tion des polarisierten oder geerdeten
Steckers. Ein polarisierter Stecker besteht
aus zwei Flachkontakten, wobei einer
breiter ist als der andere. Ein Stecker mit
Erdung besteht aus zwei Flachkontakten
und einem dritten runden Erdungss-
tift. Der breite Flachkontakt und der
Erdungsstift werden aus Sicherheitsgrün-
den integriert. Wenn der mitgelieferte
Stecker nicht in Ihre Steckdose passt,
bitten Sie einen Elektriker, die obsolete
Steckdose auszutauschen.
10. Schützen Sie das Stromversorgungskabel
davor, dass man darauf tritt und dass es
geknickt wird, vor allem an den Steckern,
Buchsenteilen und an den Punkten, an
denen das Kabel aus dem Gerät kommt.
11. Benutzen Sie nur die vom Hersteller
spezizierten Zubehörteile.
12. Benutzen Sie nur Wagen,
Ständer, Stative, Halter
oder Tische, die vom
Hersteller angegeben
werden oder passend
zum Gerät erhältlich sind.
Wenn ein Wagen eingesetzt wird, sollten
Sie vorsichtig sein, wenn Sie den Wagen
und das Gerät bewegen, um Verletzun-
gen durch Umkippen zu vermeiden.
13. Ziehen Sie den Stecker des Geräts bei
Gewittern oder wenn es längere Zeit
nicht benutzt wird aus der Steckdose.
Übergeben sie das Gerät zur Reparatur
nur qualiziertem Personal. Wenn das
Gerät in irgendeiner Weise beschädigt
wurde, zum Beispiel wenn das Strom-
versorgungskabel oder der Stecker
beschädigt sind, Flüssigkeit ausgelaufen
ist oder ein Objekt in das Gerät gefallen
ist oder das Gerät Regen oder Feuchtig-
keit ausgesetzt wurde, es nicht normal
funktioniert oder gefallen ist, muss es
von einer Fachkraft werden.
14. Dieses Gerät darf nicht Wasserspritzern
oder einem Wasserstrahl ausgesetzt
werden und es darf keine Vase oder ein
mit Wasser gefülltes Objekt auf das Gerät
gestellt werden.
15. Achtung - um einen elektrischen Schock
zu vermeiden, muss der breite Flachkon-
takt vollkommen in die breite Buchse
eingeführt werden.
16. Bitte achten Sie darauf, dass die gesamte
Umgebung um das Gerät gut gelüftet ist.
17. Der Hauptstecker ist als Abschalteinrich-
tung ausgelegt. Die Abschalteinrichtung
muss immer betriebsbereit sein.
18. Die Batterie (Batterie oder Batterien oder
Batteriepaket) darf keiner Hitze etwa
Sonneneinstrahlung, Feuer oder ähnli-
chen Einwirkungen ausgesetzt werden.
Owner's Manual
29
Stage v166: Handheld Wireless System
ENGLISH
FRANÇAISDEUTSCHEESPAÑOLITALIANO
Inhaltsverzeichnis
Einführung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
SR166 Steuerelemente des Empfängers und Funktionen . . . . . . . . . . . . . . . . . . 31
HT6 Steuerelemente des Senders und Funktionen . . . . . . . . . . . . . . . . . . . . . . 32
Quick Start Anleitung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Spezifikationen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Fehlerbehebung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
30
Stage v166: Handheld Wireless System
Herzlichen Glückwunsch für den Kauf des Samson Stage v166 Kabellosen Mikrofonsystems! Das
Stage v166 System ist die perfekte Lösung für eine jede Anwendung, die qualitativ hochwertige
kabellose Mikrofone in einer leicht zu bedienenden kompakten Form erfordert. Dieses System
besteht aus dem SR166 Empfänger und dem tragbaren kabellosen HT6 Mikrofonsender.
Mit dem Stage v166 System werden Sie hervorragende Sound Qualität mit klarem Empfang
erhalten und die Möglichkeit, sich frei am Veranstaltungsort zu bewegen. Das Stage v166 System
ist das ideale Tool für jeden Live Einsatz (Karaoke, Schulveranstaltungen, Konferenzen und
Gotteshäuser / Kirchen), bei dem kabellose Mikrofone erforderlich sind. Das Stage v166 bietet
außergewöhnliche Leistung und Zuverlässigkeit.
Obwohl dieses Produkt für eine intuitive Bedienung ausgelegt ist, empfehlen wir Ihnen, sich
die Zeit zu nehmen, diese Seiten zu lesen um zu lernen, wie wir eine Reihe von einzigartigen
Funktionen implementiert haben. Sie erhalten hier ebenfalls eine Schritt-für-Schritt Anleitungen
für die Einrichtung des Systems. Wenn Sie Ihr Stage v166 System in den Vereinigten Staaten
erworben haben, werden Sie ebenfalls im Lieferumfang eine Garantiekarte nden — vergessen
Sie bitte nicht, sie auszufüllen und einzusenden, so dass Sie Online-Support in Anspruch nehmen
können und wir Ihnen aktualisierte Informationen über dieses und andere Samson Produkte
zusenden können. Besuchen Sie ebenfalls unsere Website (www.samsontech.com), um Informa-
tionen über unser komplettes Produktangebot zu erhalten.
Wir empfehlen Ihnen, die Seriennummer im unten dafür vorgesehenen Bereich festzuhalten, um
sie später zur Hand zu haben.
Seriennummer:___________________________________
Kaufdatum:______________________________________
Falls Ihre Einheit je eine Reparatur benötigen sollte, ist eine Return Authorization (RA) Num-
mer [Rücksende-Genehmigungsnummer] erforderlich, bevor Sie Ihr Gerät an die Samson
schicken. Ohne diese Nummer wird das Gerät nicht angenommen. Bitte rufen Sie Samson unter
1-800-3SAMSON (1-800-372-6766) an und erbitten Sie eine RA Nummer, bevor Sie die Einheit
einschicken. Bitte bewahren Sie das originale Verpackungsmaterial auf und schicken Sie das Gerät
wenn möglich in der originalen Verpackung ein. Wenn Sie Ihr Samson außerhalb der Vereinig-
ten Staaten erworben haben, kontaktieren Sie bitte Ihren lokalen Händler für Informationen zu
Garantie und Reparaturen.
Funktionen
Professionelles, kabelloses System.
Leicht zu kongurieren und zu bedienen.
Kristallgesteuerter Zwischenfrequenzkreis für klaren und zuverlässigen Empfang.
1/4” Ausgang
Reichweite bis zu 100 m Sichtlinie.
Tragbarer HT6 Mikrofonsender mit Mute Schaltern
Der Sender ermöglicht einen ununterbrochenen Betrieb von bis zu neun Stunden mit
Standard 9-Volt Batterien.
Einführung
Owner's Manual
31
Stage v166: Handheld Wireless System
ENGLISH
FRANÇAISDEUTSCHEESPAÑOLITALIANO
1. Hauptschalter - Betätigen Sie ihn, um den Empfänger ein- oder auszuschalten.
2. Stromindikator - Leuchtet rot,
wenn der Empfänger einge-
schaltet ist.
3. Lautstärkeregler - Drehen Sie den
Regler, um den Pegel des Audio
Ausgangssignals vom Empfänger
einzustellen.
4. RF Indikator - Leuchtet grün,
wenn der entsprechende HT6
Mikrofonsender eingeschaltet ist
und ein kabelloses Signal vom
Empfänger erkannt wird.
5. Antenne - Der Antennenhalter
ermöglicht eine volle Umdrehung,
um die optimale Stellung für den
Empfang einstellen zu können.
Bei normalem Betrieb sollen sich
beide Antennen in vertikaler
Position benden. Die Anten-
nen können für den Trans-
port des SR166 nach innen
geklappt werden.
6. DC Eingang - Schließen Sie
hier das mitgelieferte 12-Volt,
200 mA Netzteil an.
WARNUNG: Der Austausch
des Netzteils durch irgendein anderes kann schwere Schäden am SR166 verursachen und die
Garantie wird dadurch ungültig.
7. Ausgang - Verwenden Sie einen unabgeglichenen 1/4” Stecker, um den
SR166 Empfänger an ein Line Leve Eingang eines Mixers, Verstärkers oder
eines anderen Audio Geräts anzuschließen.
8. Adapter Zugentlastung - Ziehen Sie das Kabel des Netzanschlusses durch die Zugentlas-
tung, um zu verhindern, dass der Stecker unbeabsichtigt vom Sender herausgezogen wird.
6 87
234
1
5
SR166 Steuerelemente des Empfängers und Funktionen
6 87
234
1
5
32
Stage v166: Handheld Wireless System
1. Audio ON/OFF Schalter - Wenn er in der ON Position bendet, wird
das Audio Signal übertragen. Wenn er in der OFF Position bendet,
wird das Audio Signal abgeschaltet [Mute]. Bitte beachten Sie, dass,
wenn Sie den Schalter auf die OFF Position schalten, der Sender
nicht ausgeschaltet wird - dies ist lediglich ein Weg, temporär die
Übertragung des Audio-Signals auszuschalten. Wenn das Gerät
für längere Zeit nicht genutzt wird, sollte es ausgeschaltet werden,
indem der Hauptschalter, der ON/OFF Schalter ausgeschaltet wird.
2. Haupt ON/OFF Schalter - Benutzen Sie diesen Schalter, um das HT6
ein- oder auszuschalten (lassen Sie den Schalter ausgeschaltet, wenn
das Gerät nicht benutzt wird, um die Batterie zu schonen). Stellen
Sie sicher, das Audio Signal an Ihrem externen Mixer oder Verstärker
auszuschalten, bevor Sie den Sender ein- oder ausschalten. Andern-
falls kann ein hörbares Knacken erfolgen.
3. Stromindikator - Das LED leuchtet grün, wenn der Sender einge-
schaltet ist.
4. Batteriefach - Setzen Sie hier eine Standard 9-Volt Alkaline Bat-
terie ein. Achten Sie auf die korrekte Polung, wenn Sie die Batterie
einsetzen. Wir empfehlen für dieses Gerät eine Duracell Typ MN 1604
Batterie. Obwohl auadbare Ni-Cad Batterien eingesetzt werden
können, liefern diese nicht ausreichend Energie für mehr als vier
Stunden.
WARNUNG: Setzen Sie die Batterie nicht rückwärts ein; dies kann
schwere Schäden am HT6 System verursachen und die Garantie
wird dadurch ungültig.
5. Kanalmarkierung - Gedruckte Nummer, die dem jeweiligen Kanal
am SR166 Empfänger entspricht.
HT6 Steuerelemente des Senders und Funktionen
1
3
4
5
2
1
3
4
5
2
Owner's Manual
33
Stage v166: Handheld Wireless System
ENGLISH
FRANÇAISDEUTSCHEESPAÑOLITALIANO
Quick Start Anleitung
Folgen Sie diesen grundlegenden Vorgehensweisen zur Einstellung und für den Einsatz Ihres
Kabellosen Stage v166 Systems.
1. Schließen Sie das Netzteil des SR166
Empfängers an den DC Eingang an der
Rückseite und an eine Steckdose.
2. Verbinden Sie den entsprechenden 1/4” Ausgang an den Eingang eines Mixers, Verstärkers,
einer Karaoke Maschine oder irgendein Line Level Gerät (siehe unten).
Benutzen Sie die zwei im Lieferumfang
enthaltenen ¼” - ¼” Kabel, um den SR166
Empfänger mit einem Mixer zu verbinden.
Benutzen Sie die im Lieferumfang
enthaltenen ¼” - ¼” Kabel, um den SR166
Empfänger mit einer Karaoke Maschine zu
verbinden.
1. Plugging the receiver into the wall.
2. Plugging the receiver into a mixer using 1/4" - 1/4" cable.
4. Plugging the receiver into a Karaoke machine using 1/4" - 1/4" cable.
34
Stage v166: Handheld Wireless System
3. Drehen Sie, während Sie den oberen Teil
des HT6 Senders halten, den unteren Teil
und schieben Sie ihn nach unten, um das
Batteriefach zu öffnen. Setzen Sie eine
Standard 9-Volt Alkaline Batterie ein. Achten
Sie dabei auf die korrekte Polung.
4. Schalten Sie den HT6 Sender ein, indem Sie den POWER
Schalter nach rechts schieben, und ersetzen Sie den
unteren Teil.
5. Platzieren Sie den SR166 Empfänger an der Stelle, an der er eingesetzt werden soll (allgemeine
Daumenregel ist, die “Sichtverbindung zwischen dem Empfänger und dem / den Sender(n) zu
halten, so dass die Person / Personen, die den Sender nutzen, den Empfänger sehen können).
Schalten Sie den SR166 Empfänger ein.
6. Schalten Sie den angeschlossenen
Verstärker und / oder Mixer ein, halten
Sie dabei jedoch die Lautstärke niedrig.
Vergewissern Sie sich als nächstes, dass
Ihr Sender nicht leise geschaltet ist
[Mute], indem Sie den Audio Schalter
auf die ON (oben) Position stellen.
Drehen Sie dann den Lautstärkeknopf
am SR166 voll im Uhrzeigersinn; dies ist
Einsverstärkung. Sprechen oder singen
Sie in das Mikrofon mit normaler Lautstärke, während Sie langsam das Volumen an Ihrem
Verstärker / Mixer erhöhen, bis Sie die gewünschte Lautstärke erreicht haben.
Quick Start Anleitung
1. Plugging the receiver into the wall.
2. Plugging the receiver into a mixer using 1/4" - 1/4" cable.
4. Plugging the receiver into a Karaoke machine using 1/4" - 1/4" cable.
Owner's Manual
35
Stage v166: Handheld Wireless System
ENGLISH
FRANÇAISDEUTSCHEESPAÑOLITALIANO
ALLGEMEINE SYSTEMSPEZIFIKATIONEN
Betriebsfrequenz VHF 173.80 MHz to 213.20 MHz
Anzahl der Kanäle Fester Kanal
Frequenzstabilität ±0.005%
Modulationsmodus FM
Maximale Abweichung ±15 kHz
Reichweite 100m (Sichtlinie)
Betriebstemperaturbereich 40° F (4° C) bis 110° F (43° C)
Frequenzgang 80 Hz bis 15 kHz
SR166 EMPFÄNGER SPEZIFIKATIONEN
Spiegelfrequenz 30 dB
Dynamikbereich 95.5 dB
Maximaler Ausgang 900mV
Empndlichkeit 10 dBuV für 48 dB S/N
Ausgangsanschlüsse 1/4” TS (“Mono”) Phone Buchse
Audio Ausgangslevel -10dB unabgeglichen (1/4” Phone Anschluss)
Stromversorgung 100-240V AC (50/60 Hz) nach 12V DC 200A
SPEZIFIKATIONEN DES TRAGBARER HT6 SENDERS
RF Stromausgang 10 mW
Mikrofon Element H6 Dynamisch unidirektional
Typische Batteriebetriebsdauer
(9-Volt Alkaline Batterie) 9-hours
Stromaufnahme 30 mA typisch
Abmessungen Ø2.1” x 9.3”
Ø52.6 mm x 235.5 mm
Netto Gewicht 0.4 lbs
0.18 kg
Spezikationen
36
Stage v166: Handheld Wireless System
Ausgabe Lösungen
Kein Audio
Schalten Sie den HT6 Sender über den Haupt- ON/OFF Schalter
ein.
Vergewissern Sie sich, dass die Batterien des HT6 Senders korrekt
eingelegt sind.
Prüfen Sie, ob der HT6 Audio ON/OFF Schalter auf der ON Posi-
tion steht.
Prüfen Sie, ob das SR166 Netzteil korrekt eingesteckt ist und
richtig mit einer Steckdose verbunden ist.
Schalten Sie den SR166 Empfänger ein.
Vergewissern Sie sich, dass der SR166 Ausgang und Audio Ein-
gangsanschlüsse sicher verbunden sind.
Vergewissern Sie sich, dass sich der SR166 Empfänger und der
HT6 Sender untereinander in Sichtlinie benden.
Prüfen Sie den Empfänger und Audio Input Pegel.
Verzerrter Ton
Prüfen Sie den Ausgangspegel des Empfänger und den Audio
Input des Pegel des Geräts.
Prüfen Sie die Batterien des HT6 und ersetzen Sie sie, falls sie
schwach sein sollten.
Ein anderer Sender kann auf demselben Kanal senden. Schalten
Sie den Sender aus, der eventuell Störungen verursachen könnte.
Audio Aussetzer
Der Sender kann ist eventuell zu weit vom Empfänger entfernt.
Bewegen Sie ihn näher an den Empfänger oder positionieren Sie
die Antennen neu.
Entfernen oder vermeiden Sie Quellen, die RF Störungen ver-
ursachen könnten, wie etwa Mobiltelefone, kabellose Telefone,
Beleuchtungsequipment, Computer, Metallstrukturen, etc.
Sender und Empfänger
sind auf unterschiedliche
Kanälen eingestellt
Kontaktieren Sie Ihren Samson Händler oder Vertrieb.
Fehlerbehebung
FCC Verordnungen und Regelungen
Samsons kabellose Empfänger wurden nach den FCC Verordnungen
Teil 15 und die Sender nach den FCC Verordnungen Teil 74 zertifiziert.
Die Lizenzierung von Samson Geräten liegt in der Verantwortung des
Benutzers und die Lizenzierbarkeit hängt von der Klassifikation des
Benutzers, der Anwendung und der gewählten Frequenz ab.
Dieses Gerät entspricht RSS-210 der Industrie
& Wissenschaft Kanadas.
Der Betrieb unterliegt folgenden beiden Bedingungen:
(1) dieses Gerät darf keine gefährlichen Störungen verur-
sachen und (2) dieses Gerät muss Störungen akzeptieren,
die einen unerwünschten Betrieb dieses Geräts verursa-
chen können.
ANMERKUNG: Dieses Equipment wurde getestet und entsprechend der
FCC Regelungen, Teil 15, als mit der Class B Digital Device Grenzen konform
eingestuft. Diese Grenzen wurden festgelegt, um einen angemessenen
Schutz gegen gefährliche Störungen in einer Haushalts-Umgebung zu
bieten. Dieses Gerät erzeugt und verwendet Hochfrequenzenergie. Wenn es
nicht in Übereinstimmung mit den Anleitungen installiert und verwendet
wird, kann es Störungen des Rundfunkempfangs verursachen. Bei keiner
Installation können Störungen jedoch völlig ausgeschlossen werden. Wenn
das Gerät den Rundfunk- und Fernsehempfang stört, was durch Ein- und
Ausschalten des Geräts festgestellt wird, kann der Benutzer versuchen, die
Störung durch eine oder mehrere der folgenden Maßnahmen zu beseitigen:
Die Position oder die Richtung der Empfängerantenne ändern.
Den Abstand zwischen Equipment und Receiver erhöhen.
Das Equipment mit einer Steckdose eines anderen internen Kreises
verbinden als den, mit dem der Empfänger verbunden ist.
Fragen Sie Ihren Händler oder bitten Sie einen erfahrenen Radio- und
Fernsehtechniker um Hilfe.
WARNUNG: Änderungen oder Modifikationen, die nicht ausdrücklich
von der Institution genehmigt wurden, die für die Konformität mit den
geltenden Verordnungen verantwortlichen ist, können zum Verlust der
Betriebserlaubnis des Geräts führen.
Owner's Manual
39
Stage v166: Handheld Wireless System
ENGLISH
FRANÇAISDEUTSCHEESPAÑOLITALIANO
ESTE DISPOSITIVO CUMPLE EL APARTADO 15 DE LAS NORMAS DE
LA FCC – CLASE B. SU USO ESTÁ SUJETO AL CUMPLIMIENTO DE LAS
DOS CONDICIONES SIGUIENTES: (1) ESTE DISPOSITIVO NO DEBE
PROVOCAR INTERFERENCIAS, Y (2) ESTE DISPOSITIVO DEBE ACEP-
TAR CUALQUIER INTERFERENCIA QUE RECIBA, INCLUIDAS LAS
INTERFERENCIAS QUE PUEDAN PROVOCAR UN FUNCIONAMIENTO
NO DESEADO. ADECUADO PARA EL USO EN VIVIENDAS Y OFICINAS.
Información de Seguridad Importante
PRECAUCIÓN: PARA REDUCIR EL RIESGO DE DESCARGA ELÉCTRICA, NO RETIRE NUNCA LA TAPA NI LA PARTE
POSTERIOR. EL APARATO NO CONTIENE PIEZAS EN SU INTERIOR CUYA REPARACIÓN PUEDA SER EFECTUADA
POR EL USUARIO. ENCARGUE LAS REPARACIONES A PERSONAL TÉCNICO DEBIDAMENTE CUALIFICADO.
Este símbolo de un relámpago con cabeza de echa situado en el interior de un
triángulo equilátero tiene como objeto alertar al usuario de la presencia de ten-
sión peligrosa no aislada en el interior del alojamiento del producto que podría
tener la magnitud suciente para presentar un riesgo de sacudida eléctrica.
El símbolo de un signo de exclamación situado en el interior de un triángulo equilá-
tero tiene como objeto alertar al usuario de la presencia de instrucciones de opera-
ción y mantenimiento importantes en la documentación que acompaña al aparato.
Si desea desechar este producto, recuerde que no deberá mezclarlo con los residuos domésticos habituales.
Existe un sistema de recogida por separado para los productos electrónicos usados de conformidad con lo
dispuesto en la legislación que exige un tratamiento, una recuperación y un reciclado adecuados.
Los hogares de los 25 estados miembros de la UE, Suiza y Noruega podrán devolver de forma gratuita sus aparatos electrónicos usados
en las instalaciones de recogida habilitadas a tal fin o entregándolos al vendedor (en caso de adquirir un aparato nuevo similar).
Si se encuentra en algún país no incluido en los anteriormente mencionados, póngase en contacto con las autoridades locales para que
le informen del método correcto para desechar el aparato eléctrico usado.
Al hacerlo de esta manera garantizará que el producto desechado se somete a los procesos de tratamiento, recuperación y reciclado
necesarios, evitando así los posibles efectos negativos que estos aparatos tienen para el medio ambiente y la salud humana.
ATENCIÓN
¡PELIGRO DE DESCARGA ELÉCTRICA!
¡NO ABRIR!
ADVERTENCIA
PARA EVITAR EL PELIGRO DE INCENDIO O DE DESCARGA ELÉCTRICA. NO UTILICE ESTE ENCHUFE
CON UN CABLE ALARGADOR NI CON UNA TOMA ELÉCTRICA EN LA QUE LAS PATILLAS DEL ENCHU-
FE NO PUEDAN INSERTARSE TOTALMENTE CON EL FIN DE EVITAR QUE ÉSTAS QUEDEN EXPUESTAS.
PARA EVITAR EL PELIGRO DE INCENDIO O DE DESCARGA ELÉCTRICA. NO EXPONGA ESTE APARATO
A LA LLUVIA O A LA HUMEDAD. PARA EVITAR DESCARGAS ELÉCTRICAS, ASEGÚRESE DE INSERTAR
TOTALMENTE LA PATILLA ANCHA DEL ENCHUFE EN LA RANURA ANCHA DE LA TOMA ELÉCTRICA
40
Stage v166: Handheld Wireless System
Información de Seguridad Importante
1. Lea cuidadosamente estas instrucciones.
2. Conserve estas instrucciones para cual-
quier consulta en el futuro.
3. Siga cuidadosamente todas las adver-
tencias.
4. Observe y siga todas las instrucciones del
fabricante.
5. No utilice este aparato cerca del agua.
6. Limpie el aparato solo con un trapo seco.
7. No bloquee las aperturas de ventilación.
Instale el aparato de acuerdo con las
instrucciones del fabricante.
8. No instale el aparato cerca de fuentes
de calor como, por ejemplo, rejillas de
calefacción, estufas u otros aparatos (in-
cluyendo amplicadores) que produzcan
calor.
9. No anule el sistema de seguridad del
enchufe de tipo polarizado o con toma
de tierra. Un enchufe polarizado tiene
dos patillas, una más ancho que la otra.
Un enchufe con toma de tierra tiene dos
patillas normales y una tercera para la
conexión a tierra. La patilla ancha o la
tercera patilla se incluyen como medida
de seguridad. Si el enchufe no encajara
en su toma de corriente, llame a un
electricista para que le cambie su toma
anticuada.
10. Evite que el cable de corriente quede en
una posición en la que pueda ser pisado
o aplastado, especialmente en los enchu-
fes, receptáculos y en el punto en el que
sale de la unidad.
11. Utilice solo las conexiones/accesorios
especicados por el
fabricante.
12. Utilice solo el soporte
de carro, el soporte de
trípode o la mesa especi-
cados por el fabricante
o vendidos junto con el aparato. Si utiliza
un carro, es necesario que proceda con
precaución a la hora de mover el conjun-
to del carro/aparato con el n de evitar
que vuelque y las lesiones personales
que ello podría acarrearle.
13. Desenchufe este aparato durante las
tormentas eléctricas o cuando no vaya a
utilizarlo durante un período de tiempo
prolongado. Dirija cualquier posible
reparación solo a personal técnico
debidamente cualicado. Deberá hacer
que su aparato sea reparado cuando
esté dañado de cualquier manera, como
por ejemplo si el cable de corriente o
el enchufe están dañados, o si se han
derramado líquidos, o se ha introducido
algún objeto dentro de la unidad, si ésta
ha quedado expuesta a la lluvia o la
humedad, si no funciona normalmente o
si ha caído al suelo.
14. Este aparato no debe exponerse al goteo
o a las salpicaduras de líquidos. Tampoco
deben colocarse sobre él objetos llenos
de líquidos, como por ejemplo jarrones.
15. Atención - para evitar descargas eléctri-
cas, introduzca totalmente las patillas del
enchufe en las ranuras de la toma.
16. Mantenga este aparato en un entorno
con buena ventilación.
17. El adaptador enchufable directo se utiliza
como sistema de desconexión, por lo
que debe colocarlo de forma que pueda
acceder fácilmente a él.
18. Las baterías (pilas o batería instaladas)
no deben exponerse a un calor excesivo,
como por ejemplo la luz solar directa, el
fuego, etc.
Owner's Manual
41
Stage v166: Handheld Wireless System
ENGLISH
FRANÇAISDEUTSCHEESPAÑOLITALIANO
Índice
Introducción . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Controles y Funciones del Receptor SR166 . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Controles y Funciones del Transmisor HT6. . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Guía de Inicio Rápido . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Especificaciones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Localización de Fallos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
42
Stage v166: Handheld Wireless System
Le felicitamos por haber adquirido el Sistema de Micrófono Inalámbrico Stage v166 de Samson. El sis-
tema Stage v166 es la solución perfecta para cualquier aplicación que requiera micrófonos inalámbri-
cos de alta calidad en un paquete compacto y fácil de utilizar. El sistema está formado por el receptor
SR166 y el transmisor de micrófono manual HT6.
Con el sistema Stage v166 disfrutará de una excelente calidad de sonido con una recepción clara y
podrá moverse libremente mientras lo utiliza. En cualquier aplicación de sonido en vivo (karaoke,
escuelas, conferencias, iglesias, etc.), el sistema Stage v166 es la herramienta ideal para sus necesi-
dades de micrófono inalámbrico. El sistema Stage v166 siempre proporciona un rendimiento y una
abilidad extraordinarios.
Aunque este producto está diseñado para un manejo simple e intuitivo por parte del usuario,
le recomendamos que se tome algún tiempo para leer estas páginas en las que podrá ver las
diversas características únicas que hemos implementado y encontrará instrucciones paso a paso
para configurar su sistema. Si ha adquirido su Sistema Stage v166 en los Estados Unidos, también
encontrará una tarjeta de garantía — no olvide rellenarla y enviárnosla por correo para que pueda
recibir soporte técnico online y para que le podamos ofrecer información actualizada sobre éste y
otros productos de Samson en el futuro. Además, no deje de visitar nuestra web (www.samsontech.
com) para ver toda la información sobre nuestra línea de productos.
Le recomendamos que anote el número de serie de su unidad en las líneas siguientes para utilizarlo
como referencia en el futuro si fuera necesario.
Número de serie:
__________________________________
Fecha de compra:
_________________________________
En el caso improbable de que en algún momento tuviera que reparar este aparato, deberá solicitar-
nos un número de Autorización de Devolución (RA) para poder enviar su unidad a Samson. Sin este
número no se aceptará la unidad. Póngase en contacto con Samson en el número 1-800- 3SAMSON
(1-800-372-6766) para que le facilitemos este número de autorización de devolución antes de enviar-
nos la unidad. Si fuera posible, conserve el embalaje original y los materiales de protección para de-
volvernos la unidad dentro de ellos. Si ha adquirido su producto Samson fuera de los Estados Unidos,
póngase en contacto con su distribuidor local para recibir información sobre la garantía y el servicio.
Funciones y Características
Sistema inalámbrico manual profesional
Conguración y manejo sencillos
Circuitos superheterodino con control de cristal para una recepción clara y able
Salida de ¼”
Alcance de operación de hasta 75 metros de línea de visión
Transmisor de micrófono manual HT6 con interruptores de modo silencio
El transmisor proporciona nueve horas de vida de batería utilizando pilas de 9 voltios estándar
Introducción
Owner's Manual
43
Stage v166: Handheld Wireless System
ENGLISH
FRANÇAISDEUTSCHEESPAÑOLITALIANO
1. Interruptor de Alimentación - Pulse este interruptor para encender y apagar el receptor.
2. Indicador de ALIMENTACIÓN - Se
ilumina en color rojo cuando el
receptor está encendido.
3. Control de Volumen - Gírelo para
ajustar el nivel de la salida de la
señal de audio del receptor
4. Indicador RF - Se ilumina en verde
cuando el transmisor de micró-
fono HT6 está encendido y hay
una señal inalámbrica presente y
detectada por el receptor.
5. Antena - Las monturas de las
antenas permiten el giro completo
para una colocación óptima. Du-
rante la operación normal, las dos
antenas deben estar colocadas
en posición vertical. Las antenas
pueden plegarse hacia dentro
para mayor comodidad al
transportar el SR166.
6. Entrada de CC - Conecte aquí
el adaptador de potencia de 12
voltios, 200 mA suministrado
con la unidad.
ADVERTENCIA: El uso de cual-
quier otro tipo de adaptador
de potencia podría provocar graves daños en el SR166 y la anulación de la garantía.
7. Salida - Utilice este conector de ¼” no balanceado para conectar el
receptor del SR166 a la entrada de nivel de línea de una mezcladora,
amplificador u otro equipo de audio.
8. Protección contra Tirones del Cable del Adaptador - Pase el cable del
adaptador suministrado con la unidad a través del dispositivo de protección contra tirones
con el n de evitar que el enchufe se desconecte accidentalmente del receptor.
6 87
234
1
5
Controles y Funciones del Receptor SR166
6 87
234
1
5
44
Stage v166: Handheld Wireless System
1. Interruptor ON/OFF (Encendido/Apagado) de la Señal de Audio –
Cuando se sitúa este interruptor en la posición de ON (Encendido),
se transmite señal de audio. Cuando se sitúa en la posición de OFF
(Apagado), la señal de audio se silencia. Tenga en cuenta que el
hecho de situar este interruptor en la posición de OFF no desconec-
ta la alimentación eléctrica del transmisor, sino que simplemente se
silencia temporalmente la transmisión de la señal de audio. Cuando
no vaya a utilizarse el transmisor durante un período de tiempo
prolongado, debe desconectarse la alimentación eléctrica utilizando
el interruptor ON/OFF (Encendido/Apagado).
2. Interruptor ON/OFF (Encendido/Apagado) de la Alimentación
Eléctrica – Utilice este interruptor para encender o apagar el HT6
(para conservar la potencia de la batería, asegúrese de situarlo en la
posición de OFF cuando no lo utilice).
Asegúrese de silenciar la señal de audio en su mezcladora o ampli-
ficador externo antes de encender a apagar el transmisor, ya que
en caso contrario se escuchará un sonido similar a una pequeña
explosión.
3. Indicador de Alimentación - El LED se ilumina en color verde cuan-
do el transmisor está encendido.
4. Compartimento de la Pila – Inserte en este compartimento una
pila alcalina de 9 voltios estándar. Asegúrese de respetar las
marcas de polaridad más y menos al instalar la pila. Recomenda-
mos utilizar una pila tipo Duracell MN 1604 con este dispositivo.
Aunque pueden utilizarse pilas Ni-Cad recargables, este tipo de
pilas no suministran la corriente adecuada durante más de cuatro
horas.
ADVERTENCIA: No inserte la pila hacia atrás, ya que en ese caso
el HT6 podría sufrir daños importantes y se anularía la garantía.
5. Marcas de Canal – Número impreso correspondiente al canal
apropiado en el receptor SR166.
Controles y Funciones del Transmisor HT6
1
3
4
5
2
1
3
4
5
2
Owner's Manual
45
Stage v166: Handheld Wireless System
ENGLISH
FRANÇAISDEUTSCHEESPAÑOLITALIANO
Guía de Inicio Rápido
Siga los procedimientos básicos que se indican a continuación para la configuración y el uso de
su Sistema Inalámbrico Stage Serie v166.
1. Conecte el adaptador de potencia
del receptor SR166 a la entrada de CC
del panel posterior del aparato y, a
continuación, a una toma eléctrica.
2. Conecte la salida de ¼” del receptor apropiada a la entrada de una mezcladora, estéreo,
aparato de karaoke o cualquier otra entrada de nivel de línea (ver la información que se ofrece
más adelante).
Utilice el cable ¼” a ¼” incluido para
conectar el receptor SR166 a una
mezcladora.
Utilice el cable ¼” a ¼” incluido para
conectar el receptor SR166 a una máquina
de karaoke.
1. Plugging the receiver into the wall.
2. Plugging the receiver into a mixer using 1/4" - 1/4" cable.
4. Plugging the receiver into a Karaoke machine using 1/4" - 1/4" cable.
46
Stage v166: Handheld Wireless System
3. Sujete la sección superior del transmisor
HT6 y gire la sección inferior deslizándola
hacia abajo para dejar al descubierto el
compartimento de la pila.
Inserte una pila alcalina de 9 voltios estándar
asegurándose de respetar las marcas de
polaridad más y menos.
4. Encienda el transmisor HT6 deslizando el interruptor de
ALIMENTACIÓN hacia la derecha y coloque de nuevo la
sección inferior en su posición correcta.
5. Coloque el receptor SR166 en el lugar en el que vaya a utilizarse (la regla general consiste
en mantener la “línea de visión” entre el receptor y los transmisores de manera que la(s)
persona(s) que utilice(n) el transmisor puedan ver el receptor). Conecte la alimentación del
receptor SR166.
6. Encienda el amplificador y/o la mezcladora
conectado(s), pero mantenga el volumen
en el nivel mínimo. A continuación,
asegúrese de que su transmisor no esté
silenciado colocando el interruptor
de Audio en la posición de ON. A
continuación, gire el mando de Control
de Volumen del SR166 totalmente en el
sentido de las agujas del reloj; este ajuste
corresponde a la ganancia unitaria. Hable o
cante al micrófono con un nivel de representación o actuación normal subiendo del mismo tiempo
el volumen de su amplificador/mezcladora gradualmente hasta alcanzar el nivel deseado.
Guía de Inicio Rápido
1. Plugging the receiver into the wall.
2. Plugging the receiver into a mixer using 1/4" - 1/4" cable.
4. Plugging the receiver into a Karaoke machine using 1/4" - 1/4" cable.
Owner's Manual
47
Stage v166: Handheld Wireless System
ENGLISH
FRANÇAISDEUTSCHEESPAÑOLITALIANO
ESPECIFICACIONES GENERALES DEL SISTEMA
Frecuencia de Funcionamiento VHF 173,80 MHz a 213,20 MHz
Número de Canales Canal jo
Estabilidad de Frecuencia ±0,005%
Modo de Modulación FM
Desviación Máxima ±15 kHz
Rango Operativo 75 metros (línea de visión)
Rango de Temperatura de Funcionamiento 40° F (4° C) a 110° F (43° C)
Respuesta de Frecuencia 80 Hz a 15 kHz
ESPECIFICACIONES DEL RECEPTOR SR166
Rechazo de Imagen 30 dB
Rango Dinámico 95,5 dB
Salida Máxima 900mV
Sensibilidad 10 dBµV para 48 dB S/N
Conectores de Salida Conector telefónico (“mono”) 1/4” TS
Nivel de Salida de Audio -10dB no balanceado (conector telefónico 1/4”)
Alimentación 100-240V CA (50/60 Hz) a 12V CC 200mA
ESPECIFICACIONES DEL TRANSMISOR MANUAL HT6
Salida de Potencia de RF 10 mW
Elemento de Micrófono H6 Dinámico unidireccional
Vida Típica de la Batería ( pila alcalina de 9 voltios) 9 horas
Consumo de Corriente 30 mA típico
Dimensiones Ø2,1” x 9,3”
Ø52,6 mm x 235,5 mm
Peso Neto 0,4 libras
0,18 kg
Especicaciones
48
Stage v166: Handheld Wireless System
Problema Soluciones
No Hay Audio
Encienda el transmisor HT6 utilizando el interruptor ON/OFF
(Encendido/Apagado) de la Alimentación.
Compruebe que la pila del transmisor HT6 esté bien instalada.
Compruebe que el interruptor ON/OFF (Encendido/Apagado) del
Audio del HT6 esté en la posición de ON.
Compruebe que el adaptador del SR166 esté conectado correcta-
mente y enchufado a una toma eléctrica.
Encienda el receptor SR166.
Asegúrese de que las conexiones de entrada y salida de audio del
SR166 estén conectadas correctamente.
Compruebe que el receptor SR166 y los transmisores HT6 estén
situados de manera que se mantenga la línea de visión entre
ellos.
Compruebe los controles de nivel del dispositivo de la entrada de
audio y el receptor.
Audio Distorsionado
Compruebe el nivel de la salida del receptor y el nivel del disposi-
tivo de la entrada de audio.
Compruebe el nivel de la pila del HT6 y reemplácela si fuera bajo.
Podría haber otro transmisor transmitiendo en el mismo canal.
Apague el transmisor que podría estar causando la interferencia.
Pérdidas de Audio
El transmisor podría estar demasiado alejado del receptor. Acér-
quelo al receptor o reposicione las antenas.
Retire o evite las fuentes que puedan causar interferencias de RF,
como por ejemplo teléfonos celulares, teléfonos inalámbricos,
equipos de iluminación, ordenadores, etc.
Los Transmisores y el Re-
ceptor Están en Diferentes
Canales
Póngase en contacto con su revendedor o distribuidor de Sam-
son en busca de asistencia
Localización de Fallos
Normas y Regulaciones de la FCC
Los receptores inalámbricos Samson están certificados conforme
al Apartado 15 de las Normas de la FCC y los transmisores están
certificados conforme al Apartado 74 de las Normas de la FCC.
La obtención de las licencias de operación para los equipos de Samson
es responsabilidad del usuario y la otorgabilidad de las licencias
dependerá de la clasificación y la aplicación del usuario y de la frecuen-
cia seleccionada.
Este dispositivo cumple la Norma RSS-210 de
Industry & Science Canada.
Su funcionamiento está sujeto a las dos condiciones siguientes:
(1) este dispositivo no debe provocar interferencias y (2) este
dispositivo debe aceptar cualquier interferencia que reciba,
incluidas las interferencias que puedan provocar
un funcionamiento no deseado.
NOTA:
Se ha verificado que este aparato cumple con los límites estableci-
dos para un dispositivo digital de Clase B, de acuerdo a lo establecido en la
Sección 15 de las Normas FCC. Estos límites han sido diseñados para ofrecer
una protección razonable contra las interferencias molestas en instalaciones
residenciales. Este aparato genera, utiliza y puede emitir energía de radio-
frecuencia y, si no se instala y utiliza de acuerdo con las instrucciones, puede
producir interferencias molestas en las comunicaciones de radio. No obstan-
te, no está garantizado que estas interferencias no se produzcan en una insta-
lación concreta. Si este aparato produce interferencias molestas en la recep-
ción de la radio o la televisión, lo cual podrá comprobar fácilmente apagando
y encendiendo este aparato, el usuario será el responsable de tratar de corre-
gir dichas interferencias por medio de una o más de las siguientes medidas:
Reoriente o reubique la antena receptora.
Aumente la distancia de separación entre este aparato y el receptor.
Conecte este aparato a una salida de corriente o regleta distinta a la que
esté conectado el receptor.
Pida consejo a un técnico especialista en radio/TV o en el establecimiento
en el que adquirió el producto.
ADVERTENCIA: Los cambios o modificaciones no aprobados expresamente
por el responsable del cumplimiento normativo podrían anular la autoriza-
ción del usuario para utilizar el equipo.
Owner's Manual
51
Stage v166: Handheld Wireless System
ENGLISH
FRANÇAISDEUTSCHEESPAÑOLITALIANO
IL PRESENTE DISPOSITIVO È CONFORME CON LA PARTE 15 DELLE
NORME FCC CLASSE B. IL FUNZIONAMENTO È SOGGETTO ALLE
SEGUENTI DUE CONDIZIONI: (1) IL DISPOSITIVO NON DEVE
CAUSARE INTERFERENZE DANNOSE E (2) IL DISPOSITIVO DEVE
ACCETTARE QUALSIASI INTERFERENZA RICEVUTA, COMPRESE
QUELLE CHE POTREBBERO PROVOCARNE IL FUNZIONAMENTO
INDESIDERATO. ADATTO PER USO DOMESTICO O IN UFFICIO.
Informazioni importanti sulla sicurezza
ATTENZIONE: PER RIDURRE IL RISCHIO DI FOLGORAZIONE NON ASPORTARE IL CO-
PERCHIO (O LA PARTE POSTERIORE). NON CONTIENE ELEMENTI RIPARABILI DALL'U-
TENTE. PER LE RIPARAZIONI RIVOLGERSI A PERSONALE DI ASSISTENZA QUALIFICATO.
Il simbolo del fulmine con la punta a forma di freccia all'interno di un trian-
golo equilatero ha lo scopo di avvisare l'utente della presenza di "tensioni
pericolose" non isolate nella cassa del prodotto, di ampiezza suciente a
costituire un rischio di folgorazione.
Il punto esclamativo all'interno di un triangolo equilatero ha lo scopo di av-
visare l'utente della presenza di importanti istruzioni di funzionamento e
manutenzione nella documentazione a corollario dell'apparecchio.
ATTENZIONE
RISCHIO DI FOLGORAZIONE!
NON APRIRE!
AVVERTIMENTO
PER SCONGIURARE IL PERICOLO DI INCENDI O FOLGORAZIONI NON UTILIZZARE QUESTA SPINA
CON UNA PROLUNGA, UNA PRESA DI CORRENTE O ALTRE USCITE A MENO CHE LE LAME NON
POSSANO ESSERE INSERITE COMPLETAMENTE PER EVITARE UN'ESPOSIZIONE DELLE LAME. PER
SCONGIURARE IL PERICOLO DI INCENDI O FOLGORAZIONI NON ESPORRE L'APPARECCHIO ALLA
PIOGGIA O ALL'UMIDITÀ. PER EVITARE FOLGORAZIONI INSERIRE COMPLETAMENTE LA LAMA
LARGA DELLA SPINA NELLA FESSURA LARGA DELLA PRESA.
Se si desidera smaltire il prodotto non metterlo tra i rifiuti domestici generici.
Esiste un sistema di raccolta separato per i prodotti elettronici usati conformemente con la
normativa che prescrive trattamento, recupero e riciclaggio corretti.
I soggetti privati nei 25 stati membri dell’UE, in Svizzera e in Norvegia potranno rendere gratuitamente i propri prodotti
elettronici usati presso le strutture di raccolta a ciò preposte o a un rivenditore (acquistando un prodotto nuovo similare).
Per quanto concerne i Paesi non menzionati sopra, contattare le autorità locali per venire a conoscenza dei corretti metodi
di smaltimento.
Così facendo ci si assicurerà che il prodotto smaltito sia sottoposto al trattamento e alle operazioni di recupero e riciclaggio
necessari e si eviteranno effetti potenzialmente negativi per l’ambiente e la salute umana
52
Stage v166: Handheld Wireless System
Informazioni importanti sulla sicurezza
1. Leggere le presenti istruzioni.
2. Conservare le presenti istruzioni.
3. Prestare attenzione a tutte le avver-
tenze.
4. Seguire tutte le istruzioni.
5. Non utilizzare l'apparecchio vicino
all'acqua.
6. Pulire unicamente con un panno
asciutto.
7. Non bloccare alcuna delle aperture di
ventilazione. Eseguire l'installazione
conformemente con le istruzioni della
società produttrice.
8. Non installare nei pressi di sorgenti di
calore come termosifoni, registri di ca-
lore, stufe o altri apparecchi (compresi
gli amplicatori) che producono calore.
9. Non ignorare lo scopo di sicurezza
della spina polarizzata o con messa
a terra. Una spina polarizzata ha due
lame, una più ampia dell'altra. Una
spina con messa a terra ha due lame e
un terzo connettore di messa a terra.
La lama larga, o il terzo polo, è inseri-
ta/o per la sicurezza dell'utente. Se la
spina in dotazione non è adatta per la
propria presa, consultare un elettricista
per sostituire la presa obsoleta.
10. Proteggere il cavo di alimentazione
in modo che non venga calpestato o
schiacciato, soprattutto in corrispon-
denza delle spine, dei connettori e del
punto in cui esce dall'apparecchio.
11. Usare soltanto dispositivi/accessori
specicati dalla società produttrice.
12. Usare unicamente con
il carrello, basamento,
treppiede, sostegno o
tavolo specicati dalla
società produttrice o
venduti con l'apparec-
chio. Quando si utilizza un carrello, fare
attenzione nello spostamento dell'in-
sieme carrello/apparecchio per evitare
lesioni da ribaltamento.
13. Staccare la spina dell'apparecchio dalla
presa di corrente in presenza di lampi o
quando non è utilizzato per lunghi pe-
riodi di tempo. Per qualsiasi riparazione
rivolgersi a personale di assistenza
qualicato. Eventuali riparazioni sono
necessarie se l'apparecchio è stato
danneggiato in qualche modo, come
nel caso di guasti al cavo di alimen-
tazione o alla spina, danni provocati
dal rovesciamento di liquido o dalla
caduta di oggetti sull'apparecchio,
esposizione alla pioggia o all'umidità, o
se l'apparecchio non funziona in modo
normale o è stato fatto cadere.
14. L'apparecchio non dovrà essere espo-
sto a sgocciolamento o schizzi di acqua
e su di esso non deve essere posato
alcun oggetto contenente liquido,
come per esempio un vaso.
15. Fare attenzione ad evitare folgorazioni,
inserire completamente la lama larga
della spina nella fessura larga della
presa.
16. Mantenere una corretta ventilazione
attorno all'intera unità.
17. L'adattatore a inserimento diretto
viene utilizzato come dispositivo di
disconnessione, si dovrà sempre essere
in condizione di poterlo mettere pron-
tamente in funzione.
18. Le batterie (pacco batterie o batterie
installate) non dovranno essere espo-
ste a un calore eccessivo come quello
della luce del sole, del fuoco o similare.
Owner's Manual
53
Stage v166: Handheld Wireless System
ENGLISH
FRANÇAISDEUTSCHEESPAÑOLITALIANO
Indice
Introduzione . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Comandi e caratteristiche del ricevitore SR166. . . . . . . . . . . . . . . . . . . . . . . . . 55
Comandi e caratteristiche dell'apparecchio trasmittente HT6 . . . . . . . . . . . . . . . 56
Guida introduttiva. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Specifiche . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Localizzazione guasti . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
54
Stage v166: Handheld Wireless System
Congratulazioni per aver acquistato il sistema microfonico senza li Samson modello Stage v166! Il
sistema Stage v166 è la soluzione perfetta per tutte le applicazioni che richiedano microfoni wireless di
elevata qualità in una congurazione compatta e semplice da usare. Il sistema è composto dal ricevito-
re SR166 e dalla capsula microfonica trasmittente portatile HT6.
Con il sistema Stage v166 si avrà un'elevata qualità del suono con una ricezione chiara, oltre alla possi-
bilità di camminare liberamente nel luogo di utilizzo. Per qualsiasi applicazione in cui si faccia ricorso a
suono dal vivo (karaoke, scuole, conferenze, luoghi di culto, ecc.) il modello Stage v166 è lo strumento
ideale per far fronte alle necessità di utilizzo di microfoni senza li. Lo Stage v166 fornisce sempre
prestazioni e adabilità eccezionali.
Nonostante il prodotto sia stato progettato in modo da avere un funzionamento intuitivo, consigliamo
agli utenti di dedicare un po' di tempo alla lettura di queste pagine per comprendere come abbiamo
implementato una serie considerevole di caratteristiche uniche e per ricavare istruzioni per una
configurazione passo per passo del sistema. Se l'apparecchio Stage v166 è stato acquistato negli Stati
Uniti, troverete anche un certicato di garanzia — vi preghiamo di compilarlo e spedirlo in modo da
poter ricevere assistenza tecnica on-line e da permetterci di inviarvi informazioni aggiornate su questo
e altri prodotti Samson in futuro. Vi invitiamo inoltre a consultare il nostro sito web
(www.samsontech.com) per ottenere informazioni complete su tutta la nostra linea di prodotti.
Vi raccomandiamo di registrare il numero di serie del vostro prodotto nello spazio apposito sottostan-
te, in modo da farvi riferimento in futuro.
Numero di serie:_______________________________
Data di acquisto:_______________________________
Se l'unità dovesse necessitare riparazioni, bisognerà ottenere un numero di autorizzazione al reso
(RA) prima di spedirla a Samson. Senza questo numero, l'unità non sarà accettata. Vi preghiamo di
contattare Samson allo 1-800-3SAMSON (1-800-372-6766) per ottenere un numero RA prima di spedire
la vostra unità. Conservare la confezione originale e, se possibile, eettuare il reso dell'unità nell'imbal-
laggio originario. Se il prodotto Samson è stato acquistato fuori dal territorio statunitense, contattare il
distributore locale per dettagli sulla garanzia e informazioni sull'assistenza.
Caratteristiche
Sistema portatile senza li per uso professionale.
Semplicità di congurazione e funzionamento.
Circuiteria supereterodina controllata mediante cristalli per una ricezione chiara e adabile.
Uscita da ¼" (6 mm)
Campo di funzionamento: no a 250' (76 m) di linea di vista.
Microfono trasmittente portatile HT6 con silenziatore
Con batterie standard da 9 Volt l'apparecchio trasmittente ore nove ore di carica della batteria.
Introduzione
Owner's Manual
55
Stage v166: Handheld Wireless System
ENGLISH
FRANÇAISDEUTSCHEESPAÑOLITALIANO
1. Interruttore di alimentazione - Premere per spegnere o accendere il ricevitore.
2. Spia "Sistema in attività" - Si
accende e assume colore rosso
quando viene acceso il ricevitore.
3. Controllo del volume - Si ruota
per regolare il livello dell'uscita del
segnale audio dal ricevitore.
4. Spia "RF" - Si accende e assume
colore verde quando il microfono
trasmittente HT6 è acceso e un
segnale di radio frequenza è pre-
sente e rilevato dal ricevitore.
5. Antenna - I supporti dell'antenna
ne consentono una rotazione
completa per un posizionamento
ottimale. In condizioni di funzio-
namento normale entrambe le
antenne dovrebbero essere posi-
zionate in verticale. Durante il
trasporto del sistema SR166 le
antenne possono essere piega-
te all'interno per comodità.
6. Ingresso in c.c. - Collegare in
questo punto l'adattatore di
corrente da 12 Volt fornito.
AVVERTIMENTO: la sostituzio-
ne dell'adattatore con uno di
qualsivoglia altro tipo può provocare gravi danni al sistema SR166 e renderà nulla la garanzia.
7. Uscita - Fare uso del jack da ¼" (6 mm) sbilanciato per collegare il
ricevitore SR166 all'ingresso di linea di un mixer, di un amplificatore o di
un'altra apparecchiatura audio.
8. Pressacavo adattatore - Facendo uso del pressacavo avvolgere ad
anello il cavo dell'adattatore incluso per evitare che la spina si stacchi accidentalmente dal
ricevitore.
6 87
234
1
5
Comandi e caratteristiche del ricevitore SR166
6 87
234
1
5
56
Stage v166: Handheld Wireless System
1. Interruttore accensione/spegnimento audio - Quando è imposta-
to sulla posizione ON viene trasmesso un segnale audio. Quando è
impostato sulla posizione OFF il segnale audio è silenziato. Si noti
che lo spostamento di questo interruttore in posizione OFF non
disattiva l'alimentazione dell'apparecchio trasmittente — è sempli-
cemente un modo per silenziare temporaneamente la trasmissione
del segnale audio. Quando non viene usato per periodi di tempo
prolungati, l'alimentazione del microfono trasmittente dovrebbe
essere spenta facendo ricorso all'interruttore di accensione/spegni-
mento dell'apparecchio.
2. Interruttore di accensione/spegnimento dell'apparecchio - Usare
questo interruttore per accendere o spegnere l'apparecchio HT6 (per
mantenere la carica della batteria accertarsi che sia su OFF quando il
microfono non viene utilizzato).
Assicurarsi di silenziare il segnale audio sul mixer o l'amplificatore
esterno prima di spegnere o accendere l'alimentazione dell'appa-
recchio trasmittente, in caso contrario ne potrebbe risultare un pop
udibile.
3. Spia "Sistema in attività" - Il LED si accende e assume colore verde
quando l'apparecchio trasmittente è acceso.
4. Vano batteria - Inserire in questo vano una batteria alcalina
standard da 9 Volt. All'installazione della batteria accertarsi di
rispettare i contrassegni della polarità positiva e negativa. Con
questo apparecchio si consiglia di usare batterie Duracell di tipo MN
1604. Anche se è possibile fare uso di batterie Ni-Cad esse non forni-
scono un quantitativo adeguato di corrente per più di quattro ore.
AVVERTIMENTO: non inserire le batterie a rovescio; farlo può
provocare gravi danni all'apparecchio HT6 e ne renderà invalida la
garanzia.
5. Contrassegno del canale - Sul ricevitore SR166 è stampato un
numero corrispondente all'idoneo canale.
Comandi e caratteristiche dell'apparecchio trasmittente HT6
1
3
4
5
2
1
3
4
5
2
Owner's Manual
57
Stage v166: Handheld Wireless System
ENGLISH
FRANÇAISDEUTSCHEESPAÑOLITALIANO
Guida introduttiva
Rispettare queste procedure basilari per impostare e utilizzare il sistema senza fili della serie Stage v166.
1. Collegare l'adattatore di corrente del
ricevitore SR166 all'ingresso in c.c. del
pannello posteriore e quindi a una presa
elettrica.
2. Collegare l'idonea uscita da ¼" (6 mm) all'ingresso di un mixer, stereo, apparecchio per
karaoke o a qualsiasi altro ingresso di linea (si veda di seguito).
Usare il cavo per il collegamento di
un'uscita da ¼" a un ingresso da ¼" in
dotazione per collegare il ricevitore SR166
a un mixer.
Usare il cavo per il collegamento di
un'uscita da ¼" a un ingresso da ¼" in
dotazione per collegare il ricevitore SR166
a un apparecchio per karaoke.
1. Plugging the receiver into the wall.
2. Plugging the receiver into a mixer using 1/4" - 1/4" cable.
4. Plugging the receiver into a Karaoke machine using 1/4" - 1/4" cable.
58
Stage v166: Handheld Wireless System
3. Tenendo ferma la parte superiore
dell'apparecchio trasmittente HT6, ruotare la
parte inferiore e farla scorrere verso il basso in
modo da aprire il vano batteria.
Inserire una batteria alcalina standard da 9
Volt, assicurandosi di rispettare i contrassegni
della polarità positiva e negativa.
4. Accendere l'apparecchio trasmittente HT6 facendo
scorrere l'interruttore di ACCENSIONE verso destra e
rimettere a posto la parte inferiore.
5. Posizionare il ricevitore SR166 nel luogo di utilizzo (il generico principio basilare da applicare
è mantenere la "linea di vista" tra ricevitore e apparecchi trasmittenti in modo che la/e
persona/e che usi/no questi ultimi possa/no vedere il ricevitore). Accendere l'alimentazione
del ricevitore SR166.
6. Accendere il connesso amplificatore
e/o mixer, ma tenerne il volume
completamente abbassato.
Successivamente, accertarsi che
l'apparecchio trasmittente non sia
silenziato impostando l'interruttore
dell'audio su ON. Quindi, ruotare
completamente e in senso orario la
manopola di controllo del volume sul
dispositivo SR166; questo è il guadagno
unitario. Parlare o cantare nel microfono
al normale livello che si avrebbe durante una performance alzando nel contempo lentamente
il volume dell'amplificatore/mixer fino al raggiungimento del livello desiderato.
Guida introduttiva
1. Plugging the receiver into the wall.
2. Plugging the receiver into a mixer using 1/4" - 1/4" cable.
4. Plugging the receiver into a Karaoke machine using 1/4" - 1/4" cable.
Owner's Manual
59
Stage v166: Handheld Wireless System
ENGLISH
FRANÇAISDEUTSCHEESPAÑOLITALIANO
SPECIFICHE COMPLESSIVE DEL SISTEMA
Frequenza di esercizio VHF da 173,80 MHz a 213,20 MHz
Numero di canali Canale sso
Stabilità di frequenza ±0,005%
Modulazione FM
Deviazione massima ±15 kHz
Range di esercizio 250' (76 m) (linea di vista)
Gamma di temperature di esercizio da 40° F (4° C) a 110° F (43° C)
Risposta in frequenza da 80 Hz a 15 kHz
SPECIFICHE DEL RICEVITORE SR166
Reiezione di immagine 30 dB
Gamma dinamica 95,5 dB
Uscita massima 900 mV
Sensibilità 10 dBµV per 48 dB S/N
Connettori di uscita Jack telefonico da 1/4" TS ("mono")
Livello di uscita audio -10 dB sbilanciato (connettore telefonico da 1/4")
Alimentazione 100-240 V c.a. (50 / 60 Hz) a 12 V c.c. 200 mA
SPECIFICHE DEL TRASMETTITORE PORTATILE HT6
Uscita di alimentazione in radiofrequenza 10 mW
Elemento microfono Unidirezionale dinamico H6
Normale durata della batteria (batteria alcalina da 9 Volt) 9 ore
Consumo di corrente Valore tipico 30 mA
Dimensioni Ø 2,1" x 9,3"
Ø 52,6 mm x 235,5 mm
Peso netto 0,4 lb
0,18 kg
Speciche
60
Stage v166: Handheld Wireless System
Problema Soluzioni
Assenza di audio
Accendere il microfono trasmittente HT6 con l'interruttore di
accensione/spegnimento dell'apparecchio.
Accertarsi che le batterie del microfono trasmittente HT6 siano
installate correttamente.
Controllare che l'interruttore di accensione/spegnimento audio
dell'HT6 sia sulla posizione ON.
Confermare che l'adattatore SR166 sia correttamente collegato e
inserito in una presa elettrica.
Accendere il ricevitore SR166.
Accertarsi che i collegamenti dell'uscita e dell'ingresso audio del
ricevitore SR166 siano attivi in modo stabile.
Assicurarsi che il ricevitore SR166 e gli apparecchi di trasmissione
HT6 siano nella linea di vista l'uno con gli altri.
Controllare i comandi di livello del ricevitore e del dispositivo di
ingresso audio.
Audio distorto
Controllare il livello di uscita del ricevitore e il livello del dispositi-
vo di ingresso audio.
Controllare le batterie dell'HT6 e sostituirle se il livello di carica è
basso.
Un altro dispositivo trasmittente potrebbe essere in fase di
trasmissione sul medesimo canale. Spegnere l'apparecchio tra-
smittente colpevole di causare interferenze.
Breve interruzione nella
trasmissione audio
L'apparecchio trasmittente potrebbe essere troppo lontano dal
ricevitore. Avvicinare il ricevitore o riposizionare le antenne.
Eliminare tutte le sorgenti che potrebbero causare interferenze
in radiofrequenza, come telefoni cellulari, cordless, dispositivi di
illuminazione, computer, ecc.
Gli apparecchi trasmittenti
e il ricevitore sono su
canali diversi
Contattare il rivenditore o il distributore Samson di ducia chie-
dendo la sua assistenza.
Localizzazione guasti
Regole e normativa FCC
I ricevitori senza fili Samson sono certificati in virtù della
parte 15 delle regole FCC, mentre gli apparecchi trasmittenti
sono certificati in virtù della parte 74 delle regole FCC.
La concessione di licenze relative ad apparecchiature
Samson è di responsabilità dell'utente e la licenziabilità
dipende dalla classificazione, dall'applicazione e dalla fre-
quenza selezionate dall'utente.
Il dispositivo è conforme alla RSS-210 di
Industry & Science Canada.
Il funzionamento è soggetto alle seguenti due condizioni:
(1) l'apparecchio non può causare interferenze dannose e
(2) l'apparecchio deve accettare tutte le interferenze rice-
vute, ivi comprese quelle che potrebbero provocarne
il funzionamento indesiderato.
NOTA:
l'apparecchio è stato testato e ritenuto confacente ai limiti
applicabili ai dispositivi digitali di Classe B, conformemente alla Parte
15 delle norme FCC. Questi limiti hanno lo scopo di assicurare una prote-
zione ragionevole dalle interferenze dannose negli impianti domestici.
L'apparecchio genera, usa e può irradiare energia in radiofrequenza e,
se non installato e utilizzato conformemente con le istruzioni, potrebbe
causare delle interferenze dannose alle comunicazioni radio. Tuttavia
non ci sono garanzie che in impianti particolari non si producano inter-
ferenze. Se questo apparecchio effettivamente dovesse causare inter-
ferenze dannose al ricevimento di segnali radio o televisivi, che potreb-
bero essere determinate dal suo spegnimento e dalla sua accensione,
l'utente è invitato a cercare di correggere le interferenze mettendo in
atto una o più delle seguenti misure:
Orientare o posizionare nuovamente l'antenna ricevente.
Aumentare la separazione tra l'apparecchio e il ricevitore.
Collegare l'apparecchio a una presa collocata su un circuito diverso
da quello a cui il ricevitore è collegato.
Chiedere assistenza al rivenditore o a un tecnico radio/TV esperto.
AVVERTIMENTO: variazioni o modifiche non espressamente approvate
dal soggetto responsabile per la conformità potrebbero rendere nulla
l'autorizzazione all'utilizzo dell'apparecchio da parte dell'utente.
We, Samson Technologies Corporation, located at 45 Gilpin Ave, Hauppauge, NY 11788 USA
declare under our own responsibility that the Products:
are in conformity with the essential requirements of the following EC Directive(s) when installed
in accordance with the installation instructions contained in the product documentation:
and that the standards and/or technical specications referenced below have been applied as
indicated:
Equipment: Wireless Microphone System
Model #: Samson Stage 166 SR166 Receiver; HT6 Transmitter
73/23/EEC LVD Directive
89/336/EEC EMC Directive
1999/5/EC R&TTE Directive
Year of CE Marking (Low Voltage Directive): 2013
Identication Mark: 0197
This equipment will also carry
the Class 2 equipment identier.
(Notied body
number)
R&TTE Declaration of Conformity
EN60065:2002 +A1+A11 Audio, video and similar electronic apparatus - Safety
requirements
EN301 489-1 V1.8.1 Common technical requirements.
EN301 489-9 V1.4.1 Specic conditions for wireless microphones, similar
Radio Frequency (RF) audio link equipment, cordless
audio and in-ear monitoring.
EN300 422-1 V1.3.2 Technical characteristics and methods.
EN300 422-2 V1.2.2 Harmonized EN covering essential requirements of
article 3.2 of the R&TTE directive
In accordance with EN ISO 17050:2005
Signed on behalf of the manufacturer:
Name: Douglas Bryant
Position: Vice President Engineering
Date: March 11, 2013
Samson Technologies
45 Gilpin Avenue
Hauppauge, New York 11788-8816
Phone: 1-800-3-SAMSON (1-800-372-6766)
Fax: 631-784-2201
www.samsontech.com
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Samson Stage v166 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Samson Stage v166 in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 5,03 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info