629988
23
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
23
S4000 • Powered Mixer
Power Amp Section
The S4000’s power amplifier section includes the PEAK limiter and Phantom Power switch, as well
as LED indicators for the Protection Circuit. The PHANTOM POWER switch engages the power sup-
ply to allow you to connect condenser microphones. The PEAK LIMITER helps you keep the sound
clean by using an active circuit to automatically control the system dynamics. And the Protection
Circuit will help your S4000 run trouble free for years.
55. PROTECT Indicators -The S4000 mixer has a protection circuit to help
prevent damage to the power amplifiers when it is presented with a
clipped signal for an unsafe duration. The PROTECT indicators will illu-
minate when the protection circuit is active to help avoid serious dam-
age to the amplifier section. There are individual PROTECT indicators
for the left and right power amplifiers. If either of the PROTECT indica-
tors illuminate, turn the main volume down and wait for the LED to go
off. In order to keep the amplifier from going into PROTECT mode, be
sure to keep the PEAK LEDS in the MAIN meter section from lighting.
56. PEAK LIMITER Switch and Indicator - In order to keep the sound loud and clean, there is an on-
board Limiter which is a dynamic processor that helps keep the signal from clipping the power
amplifier. When you press the PEAK LIMITER switch in, the red LED will illuminate indicating
that the dynamics processing is engaged.
IMPORTANT NOTE: Unless you are using an external limiter, it is highly recommended that the
LIMITER switch be engaged at all times. This will ensure the cleanest possible output, and
will protect your speaker system when it accidentally receives a clipped signal from your mixer.
57. Phantom Power Switch and Indicator - The mixer features an onboard, 48-Volt Phantom power
supply to operate condenser microphones. When the switch is engaged, the LED will illumi-
nate indicating that phantom power is now available at the microphone preamps.
IMPORTANT NOTE: To avoid a loud pop, be sure to turn down the master level controls before
plugging and unplugging the mic cables when the phantom power is active. Be sure the MAIN
level fader is turned all the way down before activating the Phantom Power to prevent pops
from entering any external device connected to the mixer. Also, be sure the Phantom Power is
OFF when connecting or disconnecting microphones.
Controls and Functions
55
57
56
23

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Samson S4000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Samson S4000 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,46 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info