24757
12
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
Controls and Functions
HF (HIGH FREQUENCY)
12kHz +/- 15dB shelving type. The channel’s frequency response is flat when the
knobs are in the "12:00" position. Rotating the knob towards the right will boost the
corresponding frequency band by 15dB, and rotating it towards the left will cut the
frequency by 15dB.
LF (LOW FREQUENCY)
80Hz +/- 15dB shelving type. The channel’s frequency response is flat when the
knobs are in the "12:00" position. Rotating the knob towards the right will boost the
corresponding frequency band by 15dB, and rotating it towards the left will cut the
frequency by 15dB.
AUX 1/2 Switch
When the AUX1/2 switch is in the up position, the LED is off and the AUX send for
the dual/mono channel will be assigned to AUX1. If you are using the AUX 1 for a
monitor mix in a live sound application, you will be able to add the channel to the
monitor mix when the switch is set to AUX1. When the AUX1/2 button is pressed
down the green LED will illuminate, indicating that the Aux send will now feed the
AUX 2 bus. If you are using the AUX2 bus to drive the internal, 24 BIT digital effects,
you will be able to add effects to the channel when it is set to AUX2.
AUX Control Knob
The Aux 1/2 control knob
controls the amount of signal that is sent to the AUX 1 or 2
bus depending on the position of the AUX1/2 switch as described above
.
PAN
The MDR16’s PAN control is used to place or position the stereo signal into the main
Left and Right MIX bus. You can move a stereo signal’s image to the left or right by
setting the PAN control to the left or to the right.
SOLO Switch
When engaged, the yellow LED illuminates indicating the input channel is assigned
to the SOLO bus. The SOLO switch activates a logic control switch. Pressing the
switch repeatedly will assign the input channel on or off the SOLO bus. You can use the SOLO LEVEL control to
adjust the overall volume to the SOLO Bus.
MUTE 3/4 OUTPUT ASSIGN Switch
The MUTE 3/4 switches are used to assign the channels to the 3/4 stereo bus. Any channels that have the 3/4
switch pressed in (the LED is on) will be heard in the 3/4 outputs.
In recording applications, you can use 3/4
switches with left and right panning to assign a channel to either the 3 or 4 bus outputs for sending to an input of
a recorder. You can also mix the 3/4 bus with the LEFT and RIGHT mix bus by using the 3/4 to MIX switch, located




















































16
17
18
19
20
21
(STEREO/DUAL-MONO INPUT CHANNEL CONTINUED)
CHANNEL EQUALIZER
The MDR16 Stereo/Dual-mono input channels feature a 2-band equalizer allowing you to adjust the high and low fre-
quencies independently on each channel. The channel’s frequency response is flat when the knobs are in the "12:00"
position. Rotating the knob towards the right will boost the corresponding frequency band by 15dB, and rotating it
towards the left will cut the frequency by 15dB. The frequency centers, range of boost or cut, and equalizer type for each
band are as follows:
22
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Samson MDR16 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Samson MDR16 in de taal/talen: Engels als bijlage per email.

De handleiding is 12,31 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info