629999
6
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
4
1 FADER
– 45mm LED fader for each of the 31 frequency
bands, which can be software set for +/- 12 dB or +/- 6 dB
,
or
+/- 3 dB
of cut and boost.
2 ABOVE NULL LED
– Red LED indicating the fader is
below the null
(matching)
point.
Note:
the null point
is the exact location where the fader's
physical
postion
physical postion physical
matches the level of the digital filter.)
3 MASTER FADER
- 45mm LED fader for the Main Output
level, which can be software set for +/- 12 dB
or +/- 3 dB
or +/- 6 dB of cut and boost, as well as
+12/- 120 dB
or
+
6
/- 120
dB
or +3 dB
/- 120
.
4 LCD DISPLAY
– Backlit display that shows the various
parameters under control by the operating system.
5 DATA WHEEL
– Rotary encoder for entering parameter
values.
6 BELOW NULL LED
- Green LED indicating the fader is
above the null (matching) point.
Note:
the null point is the
exact location where the fader's
physical
postion matches
physical postion matches physical
the level of the digital filter.)
7 BYPASS switch
When the red LED is on, the digital
equalizer, as well as all the on-board digital processing
effects, are defeated.
8 A / B switch
– Used to switch between the your actual
modified program, to the last program that has been
loaded or stored into memory.
9 LEFT switch
– Assigns the Left (CH1) digital equalizer to
the physical controls.
10 LINK switch
– Used to control the left and right (CH1 and
CH2) equalizer simultaneously with the one set of physi-
cal controls.
Controls and Functions
Front Panel Layout
11 RIGHT switch
- Assigns the Right (CH1) equalizer
to the physical controls.
12 MANUAL switch
When engaged, the left and
right equalizers are linked to the physical faders.
13 FBM switch
– Used to access the automatic
Feedback control parameters. When selected, the
amber LED will illuminate and the associated val-
ues will be displayed in the LCD window.
14 EQ switch
-- When engaged, the amber LED will
illuminate indicating that the EQ parameters are
under control and displayed in the LCD window.
15 GATE switch
- Used to access the automatic GATE
control parameters. When selected, the amber LED
will illuminate and the associated values for the
digital noise gate will be displayed in the LCD win-
dow.
16 DELAY switch
- When engaged, the amber LED will
illuminate indicating that the DELAY parameters
are under control and displayed in the LCD win-
dow.
17 ENHANCER switch
- When engaged, the amber
LED will illuminate indicating that the DELAY
parameters are under control and displayed in the
LCD window.
18 HP / LP switch
– LED switch used to access the
automatic HI PASS and LOW PASS control param-
eters. When selected, the amber LED will illuminate
and the associated values for the high and low pass
filters will be displayed in the LCD window.
               






6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Samson D-2500 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Samson D-2500 in de taal/talen: Engels als bijlage per email.

De handleiding is 9,78 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info