AERIAL CONNECTION
10
AAEERRIIAALL CCOONNNNEECCTTIIOONN............
First select the antenna. The following antennas are
suitable for your TV set.
* VHF antenna
* VHF / UHF combined antenna
* UHF antenna
When connecting one of these antennas to your TV set,
you should use 75 Ohm round “coaxial” cable and
unplug your TV set
If the cable is 300 ohm (double wire flat cable), the
adapter converting 300 ohm to 75 ohm should be
inserted into the TV antenna inlet. As motor vehicles
emulate energy and communication lines emulate
noise signals, please take care to install your antenna
far from these and metal surfaces. Do not extend your
antenna cable longer than required or roll it. As the
antenna cable may be impaired by rain, wind, smoke
or humidity in the long term, check the antenna and
equipment periodically and carry out maintenance
where necessary.
Alternatively the aerial may be connected via a Video
Cassette Recorder (VCR) or a DVD Recorder by
connecting the aerial lead to the RF Input socket on the
back of the Recorder. Then connect the RF Output
socket on the Recorder to the aerial input socket on the
TV (see illustration below).
