GB-17
8.5 SPEAKER SETUP
The speaker setup options are illustrated below:
8.5.1 DOWNMIX
Use the Up and Down arrow button to move the scroll and adjust the saturation.
LT / RT: Choose this setting, it will be sound like in a movie theatre if the original movie the
disc was recorded from was encoded in the Pro Logic Dolby Digital format.
STEREO: when 2-channel sound playing, stereo signal will be output.
VSS: Choose this setting, when a disc recorded with 5.1-channel sound format playing, the
fictitious surround soundtracks effect will be heard from the main soundtrack.
5.1CH:Choose this setting to output the 5.1-channel sound.
8.5.2 SUBWOOFER
There are two settings in this option: OFF / ON. When ON is chosen, the player will auto
detect the subwoofer input then output it. When OFF is chosen and the subwoofer input will
not be output
8.5.3 CENTER DELAY
You can adjust center delay in this option
8.5.4 REAR DELAY
You can adjust rear delay in this option.
8.5.5 FRONT
Settings of the front audio channels.
8.5.6 CENTER
Settings of the center audio channel.
8.5.7 REAR
Settings of the rear audio channels.
8.6 DIGITAL SETUP
The video setup options are illustrated below:
8.6.1 OP MODE
LINE OUT: Choose this setting to line out the input signal. It will be more suitable for playing
in the night time, for the output volume is low.
RF REMOD: It will be more suitable to choose this setting for playing in the day time, for the
output volume is high.
8.6.2 DYNAMIC RANGE: When “LINE OUT” is selected, choose this setting to adjust the
line out ratio and get different effect. If adjusting to FULL, the audio signal peak value will be
the minimum; while adjusting to OFF, maximum.
NOTE: This option will be validated when the DOWNMIX OFF.
8.6.3 DUAL MONO (LEFT + RIGHT)
Choose this option to setup the L and R mono output mode; There are four modes in this
option: STEREO, MONO L, MONO R, and MIX MONO.
