D750-D750A
19
Modify the remote enquiry code
With the enquiry code you can make remote access to y
from another tel
To secure the remote access t
recommended to change the remote
1. Go to the menu "ANS. MACHINE "Æ " tam settings " Æ " change pin ".
2. Enter the remote
Press
.
3. Enter the new remote enquiry code, press
.
4. Enter the new remote e
to confirm deletion.
A confirmation beep is issued.
Message compression
With this function, you can choose the compr
machine.
- A low compression level will re
quality to recorded messages.
- A high compression level will increase the answ
sound quality to recorded messages.
1. Go to the menu "ANS. MACHINE "Æ " tam settings " Æ " compression ".
2. Choose the desired compressihigh , Medium or Low ) using keys
or .
3. Press
key to confirm your select
Answer machine memory capacity
Compression C Recording quality
High
15 min Standard quality
Medium
10 min Medium quality
Low
5 min High quality
For more details, see section "MMessag", page 19.
When your answering machine
answering machine switches to
When your answer machine reaches
new messages. The handset displays " ta full " and
is displayed on the base.
D750-D750A
13
Choose the home screen
The default home screen
1. Go to the menu " hs settings " Æ "hs display".
-
" handset name " : to display the name of the hands
-
" time " : to display the time and the number of
2. Choose the desired display using keys
or . Press .
Answer calls automatically
This function allows yo
1. Go to the menu " hs settings " Æ " auto answer ".
2. Change the sta or .
3. Press
.
Changing your voice mail number
1. Go hs settings " Æ " mailbox ".
2. Use the key
to delete the number
3. E
.
Key lock
1. Hold down the key until is displ
2. To unlock the ke
until the handset beeps and
disappears.
SETTING THE DATE AND TIME
Setting the time
1. Go to the menu " hs settings " Æ "Date & time " Æ " set time ".
2. Current date is
- To keep the time, press
.
- To change it, enter the new time in the HH : MM (24 hours format).
3. Press
.
Setting the date
1. Gohs settings " Æ " Date & time " Æ " set date ".
2. A screen displays the
-
To keep the date, press .
-
To change it, enter the new
3. Press
.
If you make a mistak or .
Hour format (12H/24H)
1. Go to the menu " hs settings " Æ "Date & time " Æ " time format ".
2. Change the sta or .
3. Press
.
Date format
1. Go to the menu " hs settings " Æ "Date & time " Æ " date format ".
2. Change the sta or . Pres
.
D750-D750A
14
Setting the alarm
1. Go to the menu " hs settings " Æ " alarm ".
To deactivate the alarm, select OFF ".
To activate the alON ".
2. Press
.
3. Enter the time atHH – mm ".
4. Press
. « Snooze » (repetition) is displayed on the .
"ON " : to activate alarm r
"OFF " : to deactivate alarm
The icon
is displayed on the scr
ADVANCED SETTINGS
Association of other handsets with your bas
1. Press and hold t
detected within a minute the pairing mode will stop and your base return to standby).
2. Go to the menu "registration ".
3. Enter the 4 digit
.
4. The screen will display the
Restoring the handset / hase Default Settings
1. Go to the menu " default ".
2. Enter the base master
.
3. A screen displays a req
4. Press
.
Deleting a handset
1. Go to the menu " Bs settings " Æ " delete hs ".
2. Enter the base master
.
3. Select the handset you want to delete or key then press
key.
Modifying the dialing mode
Most telephone systems
You can, however, use the pulse dialling
1. Go to the menu " Bs settings " Æ " Dial mode ".
2. Change the status using the keys or .
3. Press .
Flash timing
If you connect your telephone to a private aut
country, you may need to modif
regard to the follow
Contact your administrator, who will supply the a
settings.
1. Go to the menu " Bs settings " Æ " Flash time ".
2. Select the appropriate time period, press .
D750-D750A
15
Modifying Base master PIN code
Your base station code (default
This must contai
1. Go to the menu " Bs settings " Æ " change pin ".
2. Enter your
.
3. Enter
Each time a digit is entered
.
4. Enter the new b
.
5. Press
key to confirm. You will
Carefully note your base sta
Authorise / prohibit call sh
With this function an
to paragraph « Join in
1. Go to the menu " Bs settings " Æ " call share ".
2. Change the sta or .
3. Pr key to confirm.
ANSWERING MACHINE (MODEL D750A ONLY )
The answering machine functi
- BBasic : a message indicates that you
leave any messages.
- RRecording : a message tells your corre
a message.
How the base display works
Display Description
There are new messages: the
unread messages
(blinks)
Answer machine activated
(fixed)
Answer machine deactivated
Access to the answer machine
enquiry
Playing your personalised answer machine m
Playing the basic answer machine message out
/
Message being recorded: (
) display alternates with the number of new
messages (
).
/
Memory full: ) di
( ).
N
R
I
D750-D750A
16
Enabling / disabling the answering machine
1. Go to the menu " ANS. MACHIN " Æ " tam ON/OFF ".
2. Select "on " or off " using or to activate your answering machine.
Press
.
Each time you power on your
state.
Playing messages
If you have received new messages, the number of received messages
the base and the icon
flashes on the handse
1. Go to the menu " ANS. MACHIN " Æ " msg playback ".
2. Press
to play the messages. Ne
3. Press
to access the various mes
screen:
- ST: stop reading the messages.
- forward : play the following message.
- Previous: return
- De: delete the current message.
4. Press the
to quit t
5. If there are no m00--00 00--00".
WWhile playing you ca
Key Action Key A
delete the current message
stop reading the messages
- 1 press: return to beginning
of the message.
- 2 presses: return to previo
message.
play the following message
Delete all old messages
1. Go to the menu " ANS. MACHINE " Æ " delete all ".
2. Press
, the massage "confirm? " is displayed.
3. Press
to confirm the deletion of
Record a memo
With this function you can leave
listened to, it will be c
1. Go to the menu " ANS. MACHINE " Æ " memo ".
2. Press
to record the memo. the message "recording " is displayed. You can n
your memo.
3. Press
to stop the recording
4. The massage " playing " is displayed and the memo you have just recorded is played.
Listening to a message while it is being recorded
While a caller is recording a m screening ? " is displayed on your
Press the key
to listen to the
D750-D750A
17
ANSWERING MACHINE SETUP (M ODELS D750A ONLY )
Modify the answering machine mode
1. Go to the menu "ANS. MACHINE "Æ " tam settings " Æ " ANSWER MODE ".
2. Select "ANSW & REC " or "Ans " using the or
key to activa
answering machine, press
. A confirmation beep is issued.
Modify the answering machine language
You can choose the la
the language y
1. Go to the menu "ANS. MACHINE "Æ " tam settings " Æ " tam language ".
2. In the list, choose the desired language using the or key, press
.
Modifying the outgoing message (OGM)
Recording a personal ou
1. Go to the menu "ANS. MACHINE "Æ " tam settings " Æ"Ogm settings " Æ" ANS " (or "ANSWER ONLY ").
2. Select "RECORD OGM " using or key, press
.
3. Record your message.
4. At the end of your message, press
.
A beep will confirm that y
If you make a mistake while
you are satisfied with your message.
The recording of a new message will au
message
.
The maximum recording duration for an message is 1120 seconds.
The recording start and
.
Listening to your answer machine message
1. Go to the menu ANS. MACHINE " "Æ "tam settings " Æ " Ogm settings " Æ"ANSW & REC " (or " ANSWER ONLY ").
2. Select "playback " using the or key, press
.
3. Your
to the previous menu.
If you have not saved a
automatically use one of the pre-recorded messages.
Number of rings
This parameter enables you to set the number of
machine answers a call. The number of
You can also select the "time saver" mode. The " time saver " mode automatically determines the
number of rings: If there are no new messages on the answering machine, the number of ring
will be 4, otherwise the n
1. Go to the menu ANS. MACHINE "Æ " tam settings " Æ "answer d".
2. In the list, selec or key or
" time saver " mode, press .
D750-D750A
18
Recording time of incoming messages
Define the maximum time a caller has to leave their message.
1. Go to the menu "ANS. MACHINE "Æ "tam settings " Æ " record time ".
2. Choose the desired recording time (60s , 120s, 180s or unlimited) by using keys or ,
then press
.
Remote access control
This function allows you to check your v
settings even when you are not at home.
Activate/deactivate rem
1. Go to the menu "ANS. MACHINE "Æ "tam settings " Æ "remote acc. ".
2. Use or to select " on " or " off " setting.
3. Press
key to confirm your
Remote access control
To remotely access your answer
answering machine to come
remote access code (0000 by default).
If no key is pressed for 5 seconds, the answer machine
This default remote accessANS.
MACHINE Æ tam settingsÆ change pin" menu (refer to the paragraph MModif
remote enquiry code page 19)
.
A beep will indicate access to t
Key Action Key Action
4 - 1 press: return to beginning
of the message.
- 2 presses: return to previo
message.
2 Delete the current messag
5 Start playback of the
messages
9 Switch OFF the answering
6 go to the next message 7 Activate the answer machine.
8
Stop playing the messages
D750-D750A
20
RECOMMENDATIONS AND SAFETY INSTRUCTIONS
Your DECT telephone must not be installed in a humid room (wash-up room,
bathroom, laundr
outside. Your telephone must be operated at temperatures ranging from 5°C and
45°C.
Only use the supplied power adapt
installation ins
identificati
precaution, in case of danger, the mains adapters act as a disconnecting
for the 230V power supply. They should be placed near the device and should be
easily accessible
This produc
of any British and Irish network operator. In case of a problem you must first contact
your reseller. Only use the supplied telephone cord.
For your p
or without
To avoid dama
1.2 V 400 mAH, never use non rechargeable batteries. Insert the batteries in the
handset ba
At the end of their u
instructions presented in
Your DECT telephone has an inside radio range of about 50 metres and up to 300
metres in open space. The immediate presence of metal parts, (o
example), of an
Some sensitive medical equipment and safety equipment may be affected by the
radio-fre
the safe
In areas where storms are fr
line usi
T
This equipment does not function in the case of an electric network shutdown: for
emergency calls, it
is recommended to use another unit during power cuts.
BATTERIES SAFETY PRECAUTIONS
To avoid any risk of explosion:
Make sure you have inserted the batteries correctly.
Use only with 1,2V 400mAh type or equivalent rechargeable batteries.
Do not dispose of the batteries in a f
Check with local code for possible
Do not burn, disassemble, mutilate or puncture. Like other batteries of this type, to
be released which can cause injury.
To reduce the risk
Keep batteries out of the reach of children.
Remove batteries if storing over 30 days.
D750-D750A
21
GENERAL PRODUCT CARE
To keep your telephone working an
Avoid putting the phone n
example, motors or fluorescent lamps)
DO NOT expose to direct sunlight or moisture.
Avoid dropping and other rough treatment to
Clean with a soft cloth
Never use a strong cleaning agent or abrasive powder because this will damage th
Retain the original packaging in case you need to ship the phone at a later date.
Changing the batteries
Make sure the telephone is OOFF before you replace batteries.
1. Remove the batteries compartment door.
2. Remove old batteries.
3. Inser
4. Put the batter
5. Place ha
TROUBLESHOOTING
Causes of poor reception:
Aluminium siding.
Foil backing on insulation.
Heating ducts and other metal construction can shield radio signals.
You are too close to appliances such as microwaves, stoves, computers, etc.
Atmosphe
Base installed in the basement or lower floor of the house.
Handset batteries are low.
You are out of range of the base.
Troubleshooting
Problem Solution
No display
x Make sure the batteries are properly installed and co
x Place the handset on the charger and fully charge the battery (at least 15 hours).
Handset does
not ring
x Make sure
x You may
some of your phones an
Not possible
to make a call
despite dial
tone
x Check that
(approximately 50 meters indoors and up to 300 meters in open space).
x Check if the base unit is plugged into a wall socket that is shared with other
househol
D750-D750A
22
ENVIRONMENT
Environmental protection and sustainable development is an important priority for Sagemcom.
Sagemcom has a policy o
an essenti
disposal.
Packaging
The presence of the logo (green dot) means that a contribution is paid to an approved
national organisation to improve packaging recovery and recycling infrastructures.
To facilitate recycling, please respect the sorting rules set up locally for this kind of
waste.
Batteries
If your product contains batteries, they must be disposed of at
The product
The cros
product be
In this respect, the European regulations ask you to dispose of it selectively:
x At sales points in the event of the purchase of simila
x At the coll
collection, etc.).
In this way you can participate in
Waste, which can have an effect on the environment
TERMS AND CONDITIONS FOR UNITED KINGDOM & IRELAND ONLY
In order to apply the guarantee, or for technical assistance, you should contact the Sagemcom
Helpdesk (0
0845 ) or the retailer you purchased your equipment from. Please make sure that
you use your
conditions. Sagemcom do not accept any liability for the equipment if used outside the frame of its
original desi
Should any malfunction arise, the Sagemcom Helpdesk or your retailer will advise
A) General Guarantee conditions
Sagemcom undertakes to remedy by repair or exchange at its own conv
labour and replacement parts, any defects in the equipment during the guarant
months or 3 (three) months for accessories, from th
those defects are a result
Unless the customer has concluded with Sagemcom a maintenance contract in respect of the
equipment which specifically provides for repairs to be carried out at the customer's premises, the
repairs will not be carried out on the equipment at the customer premises
The customer must however return the defective equipment at his/her own expense, t
supplied by the Sagemcom Helpdesk or by the ret
for a repair
any way made illegible) showing that the produc
In the case that no proof of purchase is enclosed, the Sagemcom repair cent
date as its reference for establishing the guarantee status of the product. Apart from all legal obligatory
rules, Sagemcom, do not give any Guarantee, either implicit or explicit which is not set force in the
present sect
damage, either in o
If any provision of this guarantee shall be held to be in whole or in part invalid or illegal due to an
obligatory r
shall not impair or affect the remaining provisions or parts of this guarantee. This guarantee does not
affect the Customer statutory rights.
D750-D750A
23
B) Exclusions From Guarantee
Sagemcom shall have no liability under the guarantee in respect of
x Damage, defects, breakdown or malfunction due to one or more of the following:
- Failure to properly follow the installation process and instructions for use;
- An exte
vandalism, inappropriate conditions of electrical network or water damage of any nature)
- Modifications made without th
- Unsuitable operating conditions, particularly of temperature and humidity
- Repair or maintenance of the equipment by persons not
x Wear and tear from normal daily use of the equipment and its accessories
x Damage due to insufficient or ba
x Usage of new versions of software without the previous approval of Sagemcom
x Work on any equipment
Sagemcom
x Malfunctioom softwar
the purpose
environment including:
- Proble
networks or ma
- Trans
interf
- Local network faults (wiring, servers, workstations) or the failure of the transmission network
(such as but not limited to interferences, fault or poor quality of the network
- Modification of the parameters of the cellular or broadcast network carried out after the sale
of the Product.
x Normal servicing (as defined in the user guide supplied with the equipment) as
malfunctioning due to servicing not being carried out. Servicing costs are in any event always
borne by the customer - Malfunctions resulting from the usage of products, consumables or
accessories not compatible with the equipment.
C) Out of Guarantee Repairs
In the cases set forth in B) as well as after
Authorised SAGEMCOM Repair C
In such cases, the repair and delivery cost
The foregoing shall apply unless otherw
Kingdom and Ireland.
w
ww.sagemcomdigital.co.uk
253536070A
Dépliant LU_253536070A_D75Page 2
