714757
8
Verklein
Vergroot
Pagina terug
1/76
Pagina verder
8
Troubleshooting
Care & Cleaning
Jug and lid
In order to keep your Jug clean and avoid food
drying on the blades and jug, follow the below
steps as soon as possible after use
Rinse most of the ingredients o the jug and lid.
Fill the jug with 500ml of warm water and press
the AUTO CLEAN button. If thick or sticky
ingredients require extra cleaning power add
a few drops of dish liquid detergent.
Rinse the jug and lid again and/or wash
separately in warm soapy water with a soft
cloth or bottle brush.
It is most eective to clean the jug immediately
after use.
Motor base
To clean the motor base, wipe with a soft, damp
cloth then dry thoroughly. Wipe any excess food
particles from the power cord.
Cleaning agents
Do not use abrasive scouring pads or cleaners
on either the motor base or the jug, as they may
scratch the surface. Use only warm soapy water
with a soft cloth.
Dishwasher
The blender jug and lid can be washed in the
dishwasher on a standard wash cycle. The jug can
be placed on the bottom shelf, however the lid and
inner measuring cap should be washed on the top
shelf only. Be aware that washing parts on a regular
base in the dishwasher can shorten the life of them
due to prolonged exposure to harsh detergents,
hot water and pressure.
Stubborn food stains and odours
Strong smelling foods such as garlic, sh and some
vegetables such as carrots may leave an odour
or stain on the blender jug and lid. To remove, soak
blender jug and lid for 5 minutes in warm soapy
water. Then wash with a mild detergent and warm
water, rinse well and dry thoroughly. Store jug with
the lid o.
Storage
Store your blender upright with the blender jug
assembled on the motor base, or beside it.
Do not place anything on top. To allow air to
circulate, keep the lid o.
PROBLEM EASY SOLUTION
Motor doesn’t start or
blade doesn’t rotate
Check the blender jug and lid are securely in place.
Check the ON / OFF button and selected function button is illuminated.
Check that the power plug is properly inserted into the power outlet.
Food is unevenly
chopped
This can happen when too much food is being blended at one time.
Try a smaller amount, and work in batches if necessary.
The ingredients may be too large. Try cutting into smaller pieces.
For best results, ingredients should be in pieces no larger than 2cm.
Food is chopped too
ne or is watery
Try blending for shorter period of time. Use the PULSE function
for better control.
Food sticks to blade
and jug
The mixture may be too thick. Try adding more liquid and/or using
a slower speed for blending.
Blender overloaded
(all lights ashing)
This blender has overload protection to prevent damage to the motor.
OVERLOAD PROTECTION will ash on the LCD. Unplug and allow
the blender to cool down for 30 minutes. Once cooled, you will be able
to use the blender as usual again.
We recommend blending in smaller batches, or cutting ingredients
into smaller batches.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sage SBL620 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sage SBL620 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans als bijlage per email.

De handleiding is 1,28 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info