56
4) Screw the stove adapter on top with 2 hexagonal
bolts M6 x 20, 2 hexagonal nuts M6, 4 clouts U18,
SW 10 mm
Fig. 4.7 Mount the stove adapter on the top plate
5) Re-install the backwall / heat shield back in position
Fig. 4.8 Mount the back side in position
Combustion air supply
In order to have a perfect combustion, sufficient fresh air must be supplied. The required oxygen arrives
from the back and in best ways out of the premises.
HINT : Bear in mind that the presence of other stoves or venting installations in the same room(s) will have
disruptive effect on the functioning of your stove.
If there are still fumes coming back from the chimney due to bad weather conditions (fog, storm, … ) and
within 15 minutes after detonating you should stop trying to light up the fire, until better weather conditions
have arrived.
ATTENTION ! In no way whatsoever, fresh air may never be supplied from rooms where inflammable or
volatile materials are present.