53
General use
Controlling combustion air
Combustion air is controlled by means of the left handle below the fire door.
Air supply open When lighting and filling, the primary and secondary air supply must be opened
to the maximum.
Controlled combustion As soon as the fire is burning properly, the air supply can be reduced according
to the heating needs. Removing the air supply means that the wood will burn
less quickly. However, avoid smothering the fire. There should thus always be
bright flames.
Air supply closed The air supply may only be closed after the wood has burned out entirely. If
the inset fire is not being used, the air supply should always be closed.
Fan control (SAEY INIGO)
The convection fan is controlled using a potentiometer. Turn the control fully to the right to heat up the room
more quickly. The flow rate can be reduced by turning the control to the left. The inset fire can also operate
without the fan, for which the fan is turned fully to the left.