111240
17
Verklein
Vergroot
Pagina terug
1/76
Pagina verder

English
4 INSTALLATION
    

4.1 Packaging
The original packaging has been designed to protect the
machine during transport. We recommend keeping the
packaging for future transport.
4.2 Installation Instructions
Before installing the machine, read the following safety
instructions carefully:
• Placethemachineinasafeplace;
• Makesurechildrencannotplaywiththemachine;
• Donotplacethe machineonhotsurfacesornear open
ames.
The coee machine is now ready to be connected to the power
supply.



4.3 Machine Connection

     

      

Appliance voltage has been pre-set by the manufacturer.
Check that the power voltage matches the indications on the
identication plate located on the bottom of the appliance.
• CheckthattheON/OFFbutton(17)isnotpressedbefore
connecting the machine to the power supply.
• Thepowercordislocatedinsidethemachine.Followthe
instructions in section 4.4 to lift the water tank.
(Fig.3) - Place the power cord correctly, so that it does not
interfere with the water tank.
• Fit the plug into a wall socket with suitable power
voltage.
4.4 Water Tank
• (Fig.1) - Remove the cover from the water tank (4).
•  - Lift the suction pipe and remove the water tank
(5); make sure not to damage the water suction pipe.
• (Fig.4) - Rinse the tank and ll it with fresh drinking water
taking care not to overll.
• (Fig.5) - Lift the suction pipe and t the tank back into its
housing.
• (Fig.6) - Correctly replace the water suction pipe into the
tank; and place the cover back onto the tank.
     
         

       

4.5 Priming the Water Circuit
Before starting up the machine, after a long inactivity and
when all the water has been dispensed, the machine’s water
circuit must be primed.
• (Fig.7) - Press the ON/OFF button (17).
• (Fig.8) - Place a container below the steam spout. Open
the hot water/steam knob (3) by turning it counter-
clockwise and press the brew button (15).
• Wait until a steadyjetofwater ows out of the steam
spout (Pannarello).
• Pushthebutton(15)andclosethehotwater/steamknob
(3) by turning it clockwise.
        
   

4.6 Water Circuit Rinsing
This simple operation ensures an optimum brewing and must
be performed:
- at rst start-up;
- if the machine is to remain inactive for a long time.
• (Fig.8) - Place a container under the steam wand
(Pannarello). Open the knob (3) by turning it counter-
clockwise and press the brew button (15).
• Dispensehalfthewatertankcontentfromthesteam/hot
water wand. To end the operation, press again the brew
button (15) and close the knob (3) by turning it clockwise.
•  - Insert the Portalter into the brew unit
from the bottom (7) and turn it from left to right until it
locks into place.
• PlaceasuitablecontainerunderthePortalter.
• Pressthebrewbutton(15)anddispenseallthewaterleft
in the water tank. Once the tank is empty, stop dispensing
by pressing the brew button again (15).
• Fill the tank again and wait until the "machine ready"
brew button (15) turns on.
17

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Saeco-Aroma

Zoeken resetten

  • Goede middag,
    Bij het te grondig schoonmaken van de piston heb ik het kunststof plaatje op de bodem van de piston met de rubberring erom ,niet goed terug kunnen plaatsen en toch koffie gezet.Hierbij is het kunststof plaatje gebarsten.
    Weet niet hoe dit onderdeel heet en kan dit dus ook niet bestellen.Kunt u mij aub. helpen ? Hoop het duidelijk genoeg uitgelegd te hebben.Met vriendelijke groeten Lia Gesteld op 1-1-2012 om 13:32

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Saeco Aroma bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Saeco Aroma in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools als bijlage per email.

De handleiding is 2,73 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info