661041
57
Verklein
Vergroot
Pagina terug
1/91
Pagina verder
11
GB
Checking operating safety
Before each mowing process, ensure that the safety control bar functions properly. If the safety bar is released, the motor
and cutter bar must stop within three seconds. If this is not the case, consult your nearest specialist workshop.
Ensure that all protection units are correctly applied and are not damaged!
Check the top bar (insulation) for damages. If the cover is damaged, consult the nearest authorised specialist workshop
since injuries (electrical shock) may occur in the event that you come into contact with elements that carry electricity.
After the first hours of operation and subsequently, from time to time, check all screws and nuts for firm seating and tighten if
necessary! To avoid risks, check the state each time before you start mowing and check the firm seating of the blade (see
the chapter on "Maintenance of the blade bar"). Always have the blade securing screw tightened by an authorised specialist
workshop, since in accordance with the existing standard DIN EN 60335, an insulation protection test must be made after
repair and maintenance work on insulation parts (e.g. blade screw).
In addition, regularly check the fan, blade coupling and fan housing for wear and seating.
If the mower blades are jammed, for example, when you come across an obstacle, have an authorised specialist workshop
check whether any part of the mower is damaged or deformed. Any necessary repairs should also always be carried out by
an authorised specialist workshop.
Time restrictions
The time at which lawnmowers may be used varies from region to region. Please ask the corresponding authorities before
using your mower.
Tips on caring for your lawn (Illustration M )
After 10 – 14 days every lawn starts to become overgrown. You will realize that: the often it is cut the better and stronger will
it look; since, regular mowing promotes uniform growth.
Remove all strange objects (stones, wood, branches, etc.) from the lawn before each cut; pay attention still to objects lying
around, also during the mowing process.
Make sure to mow only dry lawns as much as possible. When the ground is wet, turf will be damaged easily; the wheels
press deep into the ground and leave ridges behind.
Once the grass has become tool long, first you should mow with a higher cutting height in one direction and afterwards with a
lower height you desire, you should cut across the first direction. Only cut with a sharp flawless blade so that grass holms do
not fray. You obtain a clean cutting pattern when you mow at creeping speed in straight lanes. These lanes should always
overlap over several centimetres so that no strips remain behind.
Only on level and plane lawn surfaces should mowing be carried out at the minimum cutting height!
Please observe that the lower cutting height settings may only be used for optimal conditions. If you select cutting height that
is too low, the turf can be damaged and under certain circumstances be even destroyed.
Besides the cutting height, also the moving speed influences the cutting pattern and collection characteristic. Adapt the
moving speed to the person, grounds and to the grass height to be cut. For longer grass sections, a slower moving speed
should be selected.
When mowing tall grass, first select a high cutting height and afterwards carry out mowing with a lower height setting across
the first direction.
57

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sabo 47-EL VARIO bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sabo 47-EL VARIO in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 2,4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info