661029
34
Verklein
Vergroot
Pagina terug
1/72
Pagina verder
8
Measuring run-on time
After the electric motor has been started, the blade rotates and a wind-like noise can be
heard.
The run-on time corresponds to the duration of the wind-like noise after the electric
motor has been switched off, it can be measured using a stopwatch.
Machine safety and protective devices must not be manipulated or disabled.
Make sure that all protective devices have been attached properly and are not
damaged.
Check the upper part of the bar (insulation) for damage. If the casing should be
damaged, contact the nearest authorised workshop without delay, since otherwise
injuries (electric shock) can occur through touching the live parts.
To avoid risk, check the condition and firm attachment of the blade before every
mowing job. The blade attachment screw must always be tightened by an authorised
workshop since an insulation protection test always has to be carried out after repairs
and maintenance work on insulation parts (e.g. blade screw) in accordance with the
applicable standard DIN EN 60335. A worn or damaged blade must always be
replaced. (refer here to the chapter "Cutter blade care")
In addition, check the fan, blade coupling and fan housing every 10 operating hours for
wear and a tight fit. Also check equipment screws and nuts for a firm fit and tighten if
necessary.
If the mower mechanism becomes blocked e.g. by colliding with an obstacle, have an
authorised workshop check whether any parts of the mower are damaged or deformed.
Always have any necessary repairs done by an authorised workshop too.
If the machine starts to vibrate unusually heavily or to make unusual noises, please
have it checked immediately by an authorised workshop.
Pos: 18.10 /Innenteil/Mähbetrieb/1.1 Zeitliche Einschränkungen @ 0\mod_1115358910000_1521.docx @ 1775 @ 2 @ 1
Time restrictions
Pos: 18.11 /Innenteil/Mähbetrieb/Zeitliche Einschränkungen Text @ 0\mod_1115358942500_1521.docx @ 1784 @ @ 1
The time at which lawnmowers may be used varies from region to region. Please ask
the corresponding authorities before using your mower.
Pos: 18.12 /Innenteil/Mähbetrieb/1.1 Tipps zur Rasenpflege @ 2\mod_1144832859503_1521.docx @ 12193 @ 2 @ 1
Tips on caring for your lawn
Pos: 18.13 /Innenteil/Mähbetrieb/1.1 Mähen (Abbildung M) @ 2\mod_1144824073403_1521.docx @ 12093 @ 2 @ 1
Mowing (Illustration M )
Pos: 18.14 /Innenteil/Mähbetrieb/Tipps zur Rasenpflege Mähen Hinweis @ 23\mod_1368694771094_1521.docx @ 173504 @ @ 1
WARNING
Remove any objects (stones, wood, branches, etc.) from the lawn before each
cut; but still watch out for objects lying around during the mowing process.
Ask your dealer about lawn care instructions. Information and instructions about
mowing can also be found on the manufacturer website.
Pos: 18.15 /Innenteil/Mähbetrieb/1.1 Mulchen @ 2\mod_1144824162792_1521.docx @ 12103 @ 2 @ 1
Mulching
Pos: 18.16 /Innenteil/Mähbetrieb/Mulchen Hinweis Elektro Heckauswurf @ 23\mod_1374496244811_1521.docx @ 177533 @ @ 1
Your lawn mower can also be equipped with a mulching kit. The respective conversion
kit to a mulching system is available as an accessory from professional dealerships
(see genuine spare parts and accessories for the conversion kit order no.).
The mulching kit also includes tips and information about mulching. You will also find
information about mulching on the manufacturer website.
WARNING
Always have an authorised workshop convert the mower into a mulching system,
since an insulation protection test always has to be carried out after repairs or
maintenance work on insulation parts (e.g. blade screw) in accordance with the
applicable standard DIN EN 60335.
In addition, a wrongly assembled cutting blade coupling can allow the cutter bar
to become loose, which can lead to serious injuries.
If the grass should happen to be too high for mulching, the mulching mower can be
converted for mowing with a grass collecting bag in no time.
Pos: 18.17 /Innenteil/Mähbetrieb/1.1 Umbau auf Heckauswurfmäher (Abbildung U2 + S1) @ 2\mod_1144827658643_1521.docx @ 12143 @ 2 @ 1
Converting the machine to rear ejection (Illustration U2 + S1 )
Pos: 18.18 /Innenteil/Mähbetrieb/Umbau als Heckauswurfmäher Text @ 28\mod_1384943124229_1521.docx @ 219461 @ @ 1
Stop the engine.
Lift the ejection flap.
Remove the mulching plug from the channel U2 .
Hook the grass collecting bag in the bracket provided on the mower housing S1 .
The mulching blade system does not have to be converted! The capacity of the
collecting bag can be reduced under difficult mowing conditions (e.g. wet grass).
For the equipment to be used as a mulching machine again, the mulching plug must be
installed again. To do this, remove the grass collecting bag, insert the mulching plug
into the ejector channel and close the ejector flap.
Clean the ejector channel first.
Pos: 19.1 /---------- 1 Leerzeile ---------- @ 0\mod_1114611787140_1521.docx @ 2070 @ @ 1
Pos: 19.2 /Innenteil/Wartungsintervalle/1 WARTUNGSINTERVALLE @ 4\mod_1159190053844_1521.docx @ 20987 @ 1 @ 1
15 SERVICE INTERVALS
Pos: 19.3 /Innenteil/Wartungsintervalle/Wartungsintervalle Wichtig @ 19\mod_1346242607856_1521.docx @ 148773 @ @ 1
IMPORTANT
Avoid damage! Under extreme or unusual conditions, shorter servicing intervals
than the ones specified below may be necessary. If you establish any problems,
please contact an authorised workshop.
Pos: 19.4 /Innenteil/Wartungsintervalle/Wartungsintervalle Text @ 19\mod_1346242427863_1521.docx @ 147976 @ @ 1
Carry out routine servicing on the machine in line with the following servicing intervals.
Work must be carried out at the following servicing intervals in addition to the
maintenance work listed in these operating instructions.
Pos: 19.5 /Innenteil/Wartungsintervalle/Vor der ersten Inbetriebnahme Elektro @ 19\mod_1346242717400_1521.docx @ 148790 @ @ 1
Before initial use
Check all screw connections for a tight fit.
Check the cutting blade screw and have an authorised workshop tighten it if
necessary.
Check whether the safety control bar for the engine brake is working perfectly.
Check that all protective devices have been attached properly and are not
damaged.
Pos: 19.6 /Innenteil/Wartungsintervalle/Vor jedem Betrieb Elektro @ 19\mod_1346242858853_1521.docx @ 148807 @ @ 1
Before every operation
Check the lawn area and remove any objects.
Check the area of the boundary wires (if an automatic mower is being used for
lawn care).
Check the condition and firm fit of the blade, if necessary have an authorised
workshop tighten the blade screw.
Check whether the safety control bar for the engine brake is working perfectly.
Check that all protective devices have been attached properly and are not
damaged.
Check grass collecting equipment for wear or loss of functionality.
Check the upper part of the bar (insulation) for damage.
Check the connection cable for damage and ageing.
Pos: 19.7 /Innenteil/Wartungsintervalle/Alle 10 Betriebsstunden @ 19\mod_1346242969351_1521.docx @ 148864 @ @ 1
Every 10 operating hours
Check all screw connections for a tight fit.
Check the fan, blade coupling and fan housing regularly for wear and a tight fit.
Pos: 19.8 /Innenteil/Wartungsintervalle/Nach jedem Betrieb @ 19\mod_1346243106654_1521.docx @ 148981 @ @ 1
After every operation
Clean the mower.
Check the blade for damage and wear.
Pos: 19.9 /Innenteil/Wartungsintervalle/Alle 15-20 Betriebsstunden oder jährlich 40/43/47/52S/54er, 38-BV, JS63 @ 42\mod_1455093458180_1521.docx @ 431578 @ @ 1
Every 15-20 operating hours or annually
Lubricate the wheel bearings.
Pos: 20.1 /---------- 1 Leerzeile ---------- @ 0\mod_1114611787140_1521.docx @ 2070 @ @ 1
Pos: 20.2 /Innenteil/Pflege und Wartung des Mähers/1 PFLEGE UND WARTUNG DES MÄHERS @ 0\mod_1115362755234_1521.docx @ 1809 @ 1 @ 1
16 CARE AND SERVICING OF YOUR LAWNMOWER
Pos: 20.3 /Innenteil/Pflege und Wartung des Mähers/Pflege und Wartung des Mähers Hinweis @ 26\mod_1377171519784_1521.docx @ 189748 @ @ 1
Regular care is the best way to guarantee a long service life and problem-free
operation. Insufficient equipment maintenance will lead to safety-related faults!
Pos: 20.4 /Innenteil/Pflege und Wartung des Mähers/Originalersatzteile Hinweis @ 6\mod_1199788471285_1521.docx @ 43484 @ @ 1
Only use original spare parts because only those guarantee safety and quality!
Pos: 20.5 /Innenteil/Sicherheitshinweise/Sicherheitshinweis: Lesen, Messer, Stein, Strom, Stecker, Handschuh @ 0\mod_1125902226749_1521.docx @ 1534 @ @ 1
Safety instruction!
See table for explanation of symbols
page 3
Pos: 20.6 /Innenteil/Pflege und Wartung des Mähers/1.1 Reinigung (Abbildung O ) @ 0\mod_1115363511390_1521.docx @ 1817 @ 2 @ 1
Cleaning (Illustration O )
Pos: 20.7 /Innenteil/Pflege und Wartung des Mähers/Reinigung Text Elektro @ 14\mod_1281084556574_1521.docx @ 111323 @ @ 1
Remove dirt and grass residue immediately after finishing mowing. Place the mower on
its side and use a brush or cloth to clean.
ATTENTION
Do not put your fingers into the openings of the fan housing and hold onto the
fan. If the blade bar is rotated during cleaning, there is a risk that your fingers
may become caught between the fan and the fan housing!
IMPORTANT
Never spray the mower with water. This may damage the electrical systems.
Pos: 20.8 /Innenteil/Pflege und Wartung des Mähers/1.1 Aufbewahrung @ 0\mod_1115363938281_1521.docx @ 1810 @ 2 @ 1
Storage
Pos: 20.9 /Innenteil/Pflege und Wartung des Mähers/Aufbewahrung Text @ 0\mod_1115364661953_1521.docx @ 1824 @ @ 1
Always keep the machine in a clean condition in a closed, dry room out of reach of
children. Always allow the engine to cool down before you store the machine in a
closed room.
Pos: 20.10 /Innenteil/Pflege und Wartung des Mähers/1.1 Umklappen des Führungsholmes (Abbildung A1) @ 1\mod_1132311550241_1521.docx @ 5669 @ 2 @ 1
34

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Sabo-36-EL

Zoeken resetten

  • Kunt u mij uitleggen hoe ik de spanveer van de klep aan de achterkant moetbevestigen . Graag een foto??? Dank u!!! Gesteld op 17-10-2024 om 11:22

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sabo 36-EL bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sabo 36-EL in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 3,07 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info