12
Utah 81cm LED BLU-TV
NOTE:
The picture is just for reference. Please operate with the
OSD MENU of concrete TV and refer to the AV terminal
board.
Menu Operation
How to Navigate Menus
Before using the TV follow the steps below to learn how to
navigate the menu in order to select and adjust different
functions. The access step may differ depending on the
selected menu.
1. Press the
MENU button to display the main menu.
2. Press the
◄/►button to cycle through the main menu.
3. Press the
▲/▼button to select the desired sub item.
4. Press the
ENTER button to access the submenu.
5. Press the
▲/▼/◄/► button to select the desired
value. The adjustment in the OSD may differ depend-
ing on the selected menu.
6. Press the
MENU button to return to the previous
menu.
7. Press the
EXIT button exit from the menu.
NOTE:
When an item in MENU is displayed gray, it means that
the item is not available or cannot be adjusted.
Buttons on the TV have the same function as correspond-
ing buttons on the remote control. If your remote control
is lost or couldn’t work, you may use the buttons on the
TV to select menus. This manual focuses on operation of
the remote control.
Some items in the menus may be hidden depending on
modes or signal sources used.
Channel Menu
• Antenna
Via Input Source you can select the DTV source and you can
then switch between DVB-C, DVB-S2 and DVB-T.
* When TV signals is Air.
Auto tuning
Select the ENTER button to start Auto tuning.
1. Select the country and tune type for channels.
2. The TV will begin memorizing all of the available chan
-
nels.
Once the progress bar is full, the found channels will be
stored and the unit will proceed to the search for TV, DTV,
Radio and Data.
If you press the MENU button in TV searching, the Auto
tuning will skip to DTV searching as the suggestive pic-
ture shows.
DTV Manual Tuning
Manual store for digital channels.
Press the ◄/►button to select channel. Press the ENTER
button to search.
When a channel is found, the searching process will stop,
the channel will be saved with current channel number.
If the program is not your expected one, please press the
◄/►button to continue the searching. Press the EXIT
button to exit.
