Power supply
1. Mains adaptor (supplied with the package). Connect the mains adaptor to the DC power
socket of the radio and to the wall socket.
2. Battery (not supplied). Open the battery door and insert 4 “LR6 AA”-size alkaline batteries.
Note:Insert batteries correctly, paying attention to the +/- poles.
3. Extend the telescopic aerial as far as it will go.
4. Press the Power button to turn on the radio. The radio will automatically go into Auto Tune
mode.
Backlight operation
1. Mains adaptor supply: The LCD backlight will light up during radio operation and turn off in
Standby mode.
2. Batteries supply: Backlight will turn off after 40 seconds, and will light up again when any
button is pressed.
Function button
<Enter>
1. Press and hold the ENTER button to go to manual tuning: Press DOWN and UP to manually
scan the available stations.
2. Press the ENTER button twice to end manual tuning and return to DAB Play mode.
<Down /Up >
1. Press the DOWN and UP buttons to scroll through the stations in the DAB mode station list.
2. Press the DOWN and UP buttons to manually scan through the frequency band.
<DAB/FM>
1. Press the DAB/FM button to switch from DAB to FM mode. The radio will then automatically
tune to the nearest station.
2. Press the DAB/FM button to switch from FM to DAB mode. The radio will then automatically
tune to the nearest station.
3. Press and hold the DAB/FM button to go to the system reset menu in FM or DAB mode.
Press the ENTER button within two seconds to confirm otherwise it will return to the station
playing. Please note that once the reset has taken place, you will lose all your stored DAB
and FM presets. After system reset is complete, the radio will go to DAB station quick
search.
<SCAN>
1. Press and release the SCAN button to search for an FM station. This will start scanning up
the frequency band. To scan down the frequency band, press and hold the SCAN button for
approximately one second. Once a station has been found, the scanning will stop
automatically. If no station is found then the tuning will stop once it has cycled through the
entire FM band.
2. Press and release the SCAN button to quickly search for DAB stations. Press and hold the
SCAN button to perform a full search for all available DAB stations. You can press the
ENTER button to end the quick search and full search.
6
