GENERAL SAFETY RULES
g) Use the power tool, accessories and tool bits etc.,
in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions
and the work to be performed. Use of the power
tool for operations different from intened could result
in a hazardous situation.
5) BATTERY TOOL USE AND CARE
a) Ensure the switch is in the off position before
inserting battery pack. Inserting the battery pack
into power tools that have the switch on invites
accidents.
b) Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used
with another
battery pack.
c) Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
d) When battery pack is not in use, keep it away
from other metal abjects like paper clips, coins,
keys, nails, screws, or other small metal objects
that can make a connection from one terminal to
another. Shorting the battery terminals together may
cause burns or a fire.
e) Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid contacts
eyes, additionally seek medical help. Liquid ejected
from the battery may cause irritation or
burns.
6) SERVICE
a) Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
CHARGER SAFETY
■ To reduce risk of injury, charge only nickel-cadmium
type rechargeable batteries. Other types of batteries
may burst, causing personal injury and damage.
■ Do not expose charger to wet or damp conditions.
■ Use of an attachment not recommended or sold by
the battery charger manufacturer may result in a risk
of fire, electric shock, or injuries to person.
■ To reduce risk of damage to charger body and cord,
pull by charger plug rather than cord when
disconnecting charger.
■ Make sure cord is located so that it will not be
stepped on, tripped over, or otherwise subjected to
damage and stress.
■ An extension cord should not be used unless
absolutely necessary. Use of improper extension cord
could result in a risk of fire and electric shock.
If extension cord must be used, make sure:
7
GB
F D E
English
I P NL S DK N FIN GR H CZ RUS RO PL
SPECIFICATIONS
Model CCD-1201 CCD-1441 CCD-1801
Voltage 12 V 14.4 V18 V
Chuck 10 mm 10 mm 10 mm
Switch Variable speed Variable speed Variable speed
No load speed 0 - 600 min-
1
0 - 650 min-
1
0 - 650 min-
1
Max. Torque 10 Nm12 Nm16 Nm
Weight - incl. battery pack 1.5 kg 1.65 kg 1.9 kg
Battery pack
BPP-1213 BPP-1413 BPP-1813
Charger BCA-120/ BCA-144/ BCA-180/
BC-1200/ BC-1440/ BC-1800/
BC-1215-SBC-1415-SBC-1815-S
