733430
11
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
9
Make sure the air filter is clean.
Check both the engine lubricant level and
the fuel tank level. Refill as needed.
Inspect the work area for hazards.
If there is excessive noise or vibration, stop
the product immediately.
NOZZLE MAINTENANCE
Excessive pump pressure (a pulsing sensation
felt while squeezing the trigger) may be the
result of a clogged or dirty nozzle.
Turn off the high pressure cleaner and shut
off the water supply. Squeeze trigger to
release water pressure.
Remove the nozzle from the spray wand.
NOTE: Never point the spray wand to
yourself and others.
Using a straightened paper clip or nozzle
cleaning tool (not provided), free any
foreign materials clogging or restricting the
nozzle.
Using a garden hose, flush debris out of the
nozzle by back flushing (running the water
through the nozzle backwards or from the
outside to the inside).
Reconnect the nozzle to the spray wand.
Turn on the water supply and start the
engine.
CLEANING THE AIR FILTER
See pages 33-34.
A dirty air lter will cause starting difculty,
loss of performance, and shorten the life span
of the engine. Check the air lter monthly. For
best performance, replace the air lter at least
once a year.
REPLACING THE SPARK PLUG
See page 35.
Clean the area around the base of the
spark plug before removing to keep dirt
and debris out of the engine. Remove
spark plug.
Clean the carbon deposits on the spark
plug electrode using a plug cleaner or wire
brush. Replace the plug if worn. To replace
the spark plug, see page 34. Use spark
plug model BPR7HS (NGK) or equivalent.
Check electrode gap. The gap should be
0.7- 0.8 mm (0.03 in.). Adjust the gap, if
necessary, by carefully bending the ground
electrode.
Reinstall spark plug and tighten securely.
CHANGING THE ENGINE LUBRICANT
See page 36.
NOTE: Drain the lubricant while the engine
is still warm but not hot. Warm lubricant will
drain quickly and more completely.
NOTE: Consult hazardous waste management
guidelines in your area for the proper way of
used lubricant disposal.
PUMP LUBRICATION
The pump used in the high pressure cleaner
was lubricated with a sufcient amount of high
grade lubricant for the life of the product under
normal operating conditions. Therefore, no
further lubrication is required.
SYMBOLS ON THE PRODUCT
Safety alert
Read and understand
all instructions before
operating the product, follow
all warnings and safety
instructions.
Wear full eye and ear
protection.
To reduce the risk of injury
from kickback, hold the spray
wand securely with both
hands when the product is on.
Never point the spray wand to
people, animals, the machine
body, power supply, or any
electric appliances.
The product is not suitable
for connection to the drinking
water mains.
Burst hazard
To reduce the risk of injury
from high-pressure injection,
do not direct spray at people
or animals.
Failure to use in dry conditions
and to observe safe practices
can result in electric shock.
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ryobi RPW3200Y bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ryobi RPW3200Y in de taal/talen: Engels als bijlage per email.

De handleiding is 10,23 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info