Determining the 4-digit code found by
automatic code search (after using search
facility)
It is useful to know which code your device responded to
in case it is inadvertently changed at any later date.
Step 1 Choose the device you want to control by turning
the adjusting ring until the printed ”TV”, ”VCR” or
”SAT” is inline with the pointer on the housing of
your remote.
Step 2 Press and hold the (F) key until the LED flashes 3
times twice. (approx 2 seconds)
Step 3 After the two flashes and within 5 seconds input
the code 1112. After you have input the code, wait
for the LED to flash twice, this confirms that the
number you selected has been installed into the
unit correctly.
Step 4 To determine the stored code press the following
keys:
up for the first digit
left for the second digit
(OK/Norm) for the third digit
right for the fourth digit
After pressing one of these keys, count the number
of flashes emitted by the LED. As long as you do
not exceed 5 seconds between each process you
can press any of these keys as often as you want.
So you do not have to hurry or panic if you miss a
flash.
Make sure that you count the flash that occurs
including the initial flash when depressing the key.
User Manual
Helpline 00800 31133113
9
GB User Manual
D Bedienungsanleitung
I Istruzioni per l’usoF Mode d’emploiNL Gebruiksaanwijzing
