REPLACING WORKING TOOLS
Follow the instructions in the “FITTING TOOLS” chapter.
USABLE WORKING TOOLS
- Ceramic bond grinding wheel, maximum diameter 30 mm;
- Roloc pad, maximum diameter 75 mm.
MAINTENANCE
All maintenance operations are carried out with the tool
disconnected from the compressed air supply.
At the end of each work session, or when required, remove
any dust from the body of the tool using a jet of compressed
air.
No other maintenance operations must be undertaken by
the user.
Maintenance and cleaning of the inner parts, must be carried
out only by an authorized customer-service workshop.
NOISE
The noise level produced is 89 dB (A), measured according to
regulation EN ISO 3744 + UUNI EN ISO 11203
Warning: wear suitable hearing protections! (see
warnings).
MEAN ACCELERATION VALUE
The mean quadratic acceleration value is less than 2,5 m/sec
2
m. easured in accordance with standard UNI EN 28662 + UNI EN ISO
5. 349
GUARANTEE
All tools manufactured by RUPES Spa are guaranteed for 12
months from the date of purchase against fabrication and
material defects.
The guarantee will no longer be valid if the instructions
contained in this booklet are not followed, if the tool is used for
purposes other than that for which it is intended, if it is
dismantled, interfered with in any way or damaged due to
neglect.
The guarantee will be made valid by filling-in the from on
the inside back cover of this instruction booklet.
If the tool is found to be defective or malfunctions, it should be
returned carriage free in one piece in its original packing
together with the guarantee certificate to the manufacturer or
to one of the Assistance Centres listed in the appendix to this
booklet.
The guarantee does not automatically imply replacement of
the tool.
RUPES Spa reserve the right to carry out modifications to the
tool without prior notice.
