TECHNICAL DATA ENGLISH
8
SAFETY AND ACCIDENT PREVENTION INSTRUCTIONS
The safety and accident prevention instructions are reported in the
“SAFETY INSTRUCTION” booklet which forms an integral part of
these documents; the operating instructions indicate the additional
information required specifically for use of the tool.
Never use the tools without the safety guards.
Any operations carried out on the tool must be effected with the power
supply disconnected.
Before starting the tool, ensure that it is held tightly and not in contact
with the work surface.
Wear clothing suited to the work you are about to perform.
Check the correct drill/bit fastening and alignment.
Check the correct mixing-paddle fastening and alignment.
Due to risks that may arise during polishing, we recommend the con-
stant use of P.S.D. (personal safety devices such as gloves, headpho-
nes, goggles, face masks, etc.) according to laws in force to prevent
or reduce accident probability.
Warning! the appliance continues to work for a few seconds after it
has been switched off!
CORRECT USAGE
These aapliance can be used for:
- NL 13 - NL 16: stone, wood, metal, concrete and composite mate-
rials;
- NL 13EMCR - NL 16 Tool: glue, resins, lack mixing with specific
mixing-paddle .
The machine must not be operated in humin environments or in the
presence of flammable gar or liquids.
Support and secure firmly the workpiece or the mixing material con-
tainer.
In the event or improper use, the user is fully liable for any damages
or accidents.
GENERAL WARNINGS
TYPE
PROTECTION CLASS
OPERATING VOLTAGE
ABSORBED CURRENT
ABSORBED POWER
ROTATION/min.
IN WOOD (Ø MAX)
IN STEEL (Ø MAX)
Ø MAX MIXING PADDLE
CHUCK TYPE
Ø CHUCK
ELECTRONIC SPEED CONTROL
WEIGHT kg
NL16Tool
II
230 V - 50 Hz
2,9 A
600 W
400
-
-
120
KEY-CHUCK
13
-
2,6
NL13EMCR
II
230 V - 50 Hz
2,9 A
600 W
0÷550
-
-
120
KEY-CHUCK
13
YES
2,6
NL16
II
230 V - 50 Hz
2,9 A
600 W
400
32
16
-
SELF-LOCKING
16
-
2,6
NL13
II
230 V - 50 Hz
2,9 A
600 W
550
30
13
-
SELF-LOCKING
13
-
2,6
