8
TECHNICAL DATA ENGLISH
TYPE BR63AE BR65AE
PROTECTION CLASS II II
OPERATING VOLTAGE 230 V - 50 Hz 230V - 50 Hz
ABSORBED CURRENT 2,7 A 2,7A
ABSORBED POWER 550 W 550 W
ELECTRONIC OVERLOAD PROTECTION YES YES
ELECTRONIC SPEED CONTROL YES YES
ROTATION RPM 3.000÷7.000 3.000÷7.000
ORBITAL DIAMETER mm 3 5
PAD DIAMETER mm 150 150
PAD TYPE VELCRO FACED VELCRO FACED
EXTRACTION SYSTEM YES YES
DUST EXTRACTION FLOW CONTROL YES YES
WEIGHT kg 2,0 2,0
8
SAFETY AND ACCIDENT PREVENTION INSTRUCTIONS
The safety and accident prevention instructions are reported in the
“SAFETY INSTRUCTION” booklet which forms an integral part of
these documents; the operating instructions indicate the additional
information required specifically for use of the tool.
Never use the tools without the safety guards.
Any operations carried out on the tool must be effected with the power
supply disconnected.
Before starting the tool, ensure that it is held tightly and not in contact
with the work surface.
Wear clothing suited to the work you are about to perform.
The electric tool must be connect to a suitable dust extraction unit
(not supplied): use regulation safety devices for personal protection
and observe safety norms valid for the processed work material.
Due to risks that may arise during polishing, we recommend the con-
stant use of P.S.D. (personal safety devices such as gloves, headpho-
nes, goggles, face masks, etc.) according to laws in force to prevent
or reduce accident probability.
Warning! the appliance continues to work for a few seconds after it
has been switched off!
CORRECT USAGE
The sanders are designed for sanding wood, plastic, composite
materials, paint/varnish, filling material and similar materials.
Metal and materials with an asbestos content must not be processed
with these tools.
The machine must not be operated in humid environments or in the
presence of flammable gas or liquids.
Make sure the work piece is sufficiently fastened.
In the event of improper use, the user is fully liable for any damages or
accidents.
GENERAL WARNINGS
The tool must be connected to a suitable dust extraction system (not supplied).
